- 02 May, 2016 21 commits
-
-
Gustavo Padovan authored
Replace the legacy drm_send_vblank_event() with the new helper function. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-8-git-send-email-gustavo@padovan.org
-
Gustavo Padovan authored
Replace the legacy drm_send_vblank_event() with the new helper function. Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: "Terje Bergström" <tbergstrom@nvidia.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Also comments seem to be a bit outdated, as it looks like nonblocking commit is supported by msm. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Maarten Lankhorst authored
The async name is deprecated and should be changed to nonblocking. Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Maarten Lankhorst authored
Another step in renaming async to nonblocking for atomic commit. Signed-off-by:
-
Maarten Lankhorst authored
This is the first step of renaming async commit to nonblocking commit. The flag passed by userspace is NONBLOCKING, and async has a different meaning for page flips, where it means as soon as possible. Fixing up comments in drm core is done manually, to make sure I didn't miss anything. For drivers, the following cocci script is used to rename bool async to bool nonblock: @@ identifier I =~ "^async"; identifier func; @@ func(..., bool - I + nonblock , ...) { <... - I + nonblock ...> } @@ identifier func; type T; identifier I =~ "^async"; @@ T func(..., bool - I + nonblock , ...); Thanks to Tvrtko Ursulin for the cocci script. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: -
Noralf Trønnes authored
Use the fbdev deferred io support in drm_fb_helper. The (struct fb_ops *)->fb_{fillrect,copyarea,imageblit} functions will now schedule a worker instead of being flushed directly like it was previously (recorded when in atomic). This patch has only been compile tested. Signed-off-by:Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
Use the fbdev deferred io support in drm_fb_helper which mirrors the one qxl has had. This patch has only been compile tested. Signed-off-by:
-
Noralf Trønnes authored
This adds fbdev deferred io support if CONFIG_FB_DEFERRED_IO is enabled. The driver has to provide a (struct drm_framebuffer_funcs *)->dirty() callback to get notification of fbdev framebuffer changes. If the dirty() hook is set, then fb_deferred_io is set up automatically by the helper. Two functions have been added so that the driver can provide a dirty() function: - drm_fbdev_cma_init_with_funcs() This makes it possible for the driver to provided a custom (struct drm_fb_helper_funcs *)->fb_probe() function. - drm_fbdev_cma_create_with_funcs() This is used by the .fb_probe hook to set a driver provided (struct drm_framebuffer_funcs *)->dirty() function. Cc: laurent.pinchart@ideasonboard.com Signed-off-by:
-
Noralf Trønnes authored
Export fb_deferred_io_mmap so drivers can change vma->vm_page_prot. When the framebuffer memory is allocated using dma_alloc_writecombine() instead of vmalloc(), I get cache syncing problems on ARM. This solves it: static int drm_fbdev_cma_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma) { fb_deferred_io_mmap(info, vma); vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); return 0; } Could this have been done in the core? Drivers that don't set (struct fb_ops *)->fb_mmap, gets a call to fb_pgprotect() at the end of the default fb_mmap implementation (drivers/video/fbdev/core/fbmem.c). This is an architecture specific function that on many platforms uses pgprot_writecombine(), but not on all. And looking at some of the fb_mmap implementations, some of them sets vm_page_prot to nocache for instance, so I think the safest bet is to do this in the driver and not in the fbdev core. And we can't call fb_pgprotect() from fb_deferred_io_mmap() either because we don't have access to the file pointer that powerpc needs. Signed-off-by:Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Noralf Trønnes authored
This adds deferred io support to drm_fb_helper. The fbdev framebuffer changes are flushed using the callback (struct drm_framebuffer *)->funcs->dirty() by a dedicated worker ensuring that it always runs in process context. For those wondering why we need to be able to handle atomic calling contexts: Both panic paths and cursor code and fbcon blanking can run from atomic. See commit bcb39af4 Author: Dave Airlie <airlied@redhat.com> Date: Thu Feb 7 11:19:15 2013 +1000 drm/udl: make usage as a console safer for where this was originally discovered. Signed-off-by:
-
Noralf Trønnes authored
Now that drm_fb_helper gets deferred io support, the drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule a worker that will call the (struct drm_framebuffer *)->funcs->dirty() function. This will break this driver so use the sys_{fillrect,copyarea,imageblit} functions directly. Signed-off-by: -
Noralf Trønnes authored
Now that drm_fb_helper gets deferred io support, the drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule a worker that will call the (struct drm_framebuffer *)->funcs->dirty() function. This will break this driver so use the sys_{fillrect,copyarea,imageblit} functions directly. Signed-off-by:
-
- 28 Apr, 2016 4 commits
-
-
Thierry Reding authored
Some of the functions implemented are flagged as not having a prototype defined when building with W=1. Include the header to avoid these build warnings. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Ville Syrjälä authored
Let's be nice and interrupt the dpcd aux-dev reads/writes when there's a signal pending. Much nicer if the user can hit ^C instead of having to sit around waiting for the read/write to finish. time dd if=/dev/drm_dp_aux0 bs=$((1024*1024)) ^C before: real 0m34.681s user 0m0.003s sys 0m6.880s after: real 0m0.222s user 0m0.006s sys 0m0.057s Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
The debug logging here can be very verbose in the kernel logs and provides no information which userspace doesn't have the access to already. Turn it off so kernel logs become more manageable. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Tvrtko Ursulin authored
Debug logging in this function does not provide any information apart that the userspace is calling an ioctl on the connector. There is not any info on the connector provided at all and since there are other ioctls userspace typically calls which do log useful things about the same connectors, remove this one to make things a little bit more readable when KMS debugging is turned on. Signed-off-by:
-
- 27 Apr, 2016 8 commits
-
-
Daniel Vetter authored
amdgpu gained dev->struct_mutex usage, and that's because it's walking the dev->filelist list. Protect that list with it's own lock to take one more step towards getting rid of struct_mutex usage in drivers once and for all. While doing the conversion I noticed that 2 debugfs files in i915 completely lacked appropriate locking. Fix that up too. v2: don't forget to switch to drm_gem_object_unreference_unlocked. Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-9-git-send-email-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It's only used for legacy mmaping support now. Reviewed-by:
-
Daniel Vetter authored
And again make sure it's a no-op for modern drivers. Another case of dev->struct_mutex gone for modern drivers! Note that the entirety of the legacy addmap interface is now protected by DRIVER_MODESET. Note that just auditing kernel code is not enough, since userspace loves to set up legacy maps on it's own for various things - with ums userspace and kernel space share control over resources. v2: Also add a DRIVER_* check like for all other maps functions to really short-circuit the code. And give drm_legacy_rmmap used by the dev unregister code the same treatment. v3: - remove redundant return; (Alex, Chris) - don't special case nouveau with DRIVER_KMS_LEGACY_CONTEXT. v4: Again special case nouveau. The problem is not directly in the ddx, but that it calls dri1 functions from the X server. And those do call drmAddMap. Fixed only in commit b1a630b48210d6a3c44994fce1b73273000ace5c Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 7 14:45:14 2012 +1000 nouveau: drop DRI1 device open interface. Acked-by: -
Daniel Vetter authored
Like in commit 0e975980 Author: Peter Antoine <peter.antoine@intel.com> Date: Tue Jun 23 08:18:49 2015 +0100 drm: Turn off Legacy Context Functions we need to again make an exception for nouveau, but everyone else really doesn't need this. Dave Airlie dug out again why we need this: The problem is the legacy dri1 open function the nouveau ddx called, and the problematic code is actually in the X server itself. It was only fixed in commit b1a630b48210d6a3c44994fce1b73273000ace5c Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 7 14:45:14 2012 +1000 nouveau: drop DRI1 device open interface. Cc: Peter Antoine <peter.antoine@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Daniel Vetter authored
Only two drivers implement this hook. vmwgfx (which doesn't need it really) and legacy radeon (which since v1 has been nuked, yay). v1: Rebase over radeon ums removal. Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by:
-
Daniel Vetter authored
It belongs right next to the addmap and rmmap functions really. And for OCD consistency name it drm_legacy_getmap_ioctl. Reviewed-by:
-
Daniel Vetter authored
Except for the ->lasclose driver callback evrything in drm_lastclose() is all legacy cruft and can be hidden. Which means another dev->struct_mutex site disappears entirely for modern drivers! Also while at it change the return value of drm_lastclose to void since it will always succeed. No one checks the return value of close() anyway, ever. v2: Move misplaced hunk, spotted by 0day. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by:
-
Daniel Vetter authored
It has a DRIVER_MODESET check to sure make it's not creating havoc for drm drivers. Make that clear in the name too. v2: Move misplaced hunk, spotted by 0day and Thierry. Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by:
-
- 26 Apr, 2016 1 commit
-
-
Daniel Vetter authored
For documentation and paranoia. Acked-by:
-
- 25 Apr, 2016 1 commit
-
-
Emil Velikov authored
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Acked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
- 22 Apr, 2016 5 commits
-
-
Laurent Pinchart authored
Commit d63c25e4 ("drm: rcar-du: Use generic drm_connector_register_all() helper") left an unused local variable behind. Remove it. Fixes: d63c25e4 ("drm: rcar-du: Use generic drm_connector_register_all() helper") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Lyude authored
Since we've fixed up drm_dp_dpcd_read() to allow for retries when things timeout, there's no use for having this function anymore. Good riddens. Signed-off-by:
Lyude <cpaul@redhat.com> Tested-by:
-
Lyude authored
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. Some sinks will just return garbage for the first aux tranaction they receive when coming out of sleep mode, so we need to perform an additional read before the actual read to workaround this. Changes since v5 - If the throwaway read in drm_dp_dpcd_read() fails, return the error from that instead of continuing. This follows the same logic we do in drm_dp_dpcd_access() (e.g. the error from the first transaction may differ from the errors that proceeding attempts might return). Signed-off-by:
-
Lyude authored
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. We cannot rely on sinks NACKing or deferring when they can't receive transactions, nor can we rely on any other sort of consistent error to know when we should stop retrying. As such, we need to just retry unconditionally on errors. We also make sure here to return the error we encountered during the first transaction, since it's possible that retrying the transaction might return a different error then we had originally. This, along with the previous patch, work around a weird bug with the ThinkPad T560's and it's dock. When resuming the laptop, it appears that there's a short period of time where we're unable to complete any aux transactions, as they all immediately timeout. The only machine I'm able to reproduce this on is the T560 as other production Skylake models seem to be fine. The period during which AUX transactions fail appears to be around 22ms long. AFAIK, the dock for the T560 never actually turns off, the only difference is that it's in SST mode at the start of the resume process, so it's unclear as to why it would need so much time to come back up. There's been a discussion on this issue going on for a while on the intel-gfx mailing list about this that has, in addition to including developers from Intel, also had the correspondence of one of the hardware engineers for Intel: http://www.spinics.net/lists/intel-gfx/msg88831.html http://www.spinics.net/lists/intel-gfx/msg88410.html We've already looked into a couple of possible explanations for the problem: - Calling intel_dp_mst_resume() before right fix. intel_runtime_pm_enable_interrupts(). This was the first fix I tried, and while it worked it definitely wasn't the right fix. This worked because DP aux transactions don't actually require interrupts to work: static uint32_t intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg; uint32_t status; bool done; #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", has_aux_irq); #undef C return status; } When there's no interrupts enabled, we end up timing out on the wait_event_timeout() call, which causes us to check the DP status register once to see if the transaction was successful or not. Since this adds a 10ms delay to each aux transaction, it ends up adding a long enough delay to the resume process for aux transactions to become functional again. This gave us the illusion that enabling interrupts had something to do with making things work again, and put me on the wrong track for a while. - Interrupts occurring when we try to perform the aux transactions required to put the dock back into MST mode. This isn't the problem, as the only interrupts I've observed that come during this timeout period are from the snd_hda_intel driver, and disabling that driver doesn't appear to change the behavior at all. - Skylake's PSR block causing issues by performing aux transactions while we try to bring the dock out of MST mode. Disabling PSR through i915's command line options doesn't seem to change the behavior either, nor does preventing the DMC firmware from being loaded. Since this investigation went on for about 2 weeks, we decided it would be better for the time being to just workaround this issue by making sure AUX transactions wait a short period of time before retrying. Signed-off-by:
-
Lyude authored
This is part of a patch series to migrate all of the workarounds for commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's DP helper. Some sinks need some time during the process of resuming the system from sleep before they're ready to handle transactions. While it would be nice if they responded with NACKs in these scenarios, this isn't always the case as a few sinks will just timeout on all of the transactions they receive until they're ready. Signed-off-by:
-
