Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230113141117.23353-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support of identification registers to STM32 DFSDM
to allow hardware capabilities discovery and configuration check.
The number of filters and channels, are read from registers,
when they are available.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20230105125331.328275-1-olivier.moysan@foss.st.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Define the ADC channel used for battery identification purposes so it
can be used in drivers.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20230106-pm7250b-bat_id-v1-1-82ca8f2db741@fairphone.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The magnetometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS3MDL magnetometer, so just
add the new st,lsm303c-magn compatible for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.netSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The accelerometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS2HH12 accelerometer, so just
add the new st,lsm303c-accel compatible for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-3-stephan@gerhold.netSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ST LSM303C [1] is a accelerometer and magnetometer combo sensor
compatible with the existing ST sensor bindings. Accelerometer and
magnetometer are exposed through separate I2C/SPI devices, so document
separate compatibles with -accel and -magn suffix.

[1]: https://www.st.com/resource/en/datasheet/lsm303c.pdfSigned-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-2-stephan@gerhold.netSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Vorwerk <zabe@avorwerk.net>
Link: https://lore.kernel.org/r/20230105025351.12099-1-zabe@avorwerk.netSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is no point to specify asm-generic for the unaligned.h.
Drop the 'generic' suffix and move the inclusion to be after
the non-IIO linux/* ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230103144903.39905-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Sort the headers in alphabetic order in order to ease
the maintenance for this part.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-4-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused and code is obfuscated
by ifdeffery.

Drop anti-pattern of ACPI_PTR() use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-3-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The spi_get_device_match_data() helps to get driver data from the
firmware node or SPI ID table. Use it instead of open coding.

While at it, switch ID tables to provide an acrual pointers to
the configuration data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-2-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

It is useful to be able to build this driver without needing
to build support for ARCH_EP93XX.

Also add an explicit dependency on HAS_IOMEM so we have
devm_platform_ioremap_resource() etc available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20221231144128.489810-1-jic23@kernel.org

Prepare for EP93xx conversion to DT.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20221223162636.6488-2-alexander.sverdlin@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree bindings for Cirrus Logic EP9301/EP9302 internal SoCs' ADC
block.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20221223162636.6488-1-alexander.sverdlin@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Document the compatible for the IADC used on PM8226.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221228230421.56250-5-rayyan@ansari.shSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Correct inteface->interface in description.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221223162231.120216-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fix a typo in the description, where "interface" is spelled incorrectly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20221216004015.2902966-1-festevam@denx.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Much like 807efb7102e8 ("thermal: qcom-spmi-adc-tm5: suppress
probe-deferral error message") the ADC5 driver also spams a similar
probe-deferral error on startup when a channel is not yet available:

    [    0.343136] qcom-spmi-adc-tm5 1c40000.spmi:pmic@0:adc-tm@3500: get dt data failed: -517

Suppress it by using dev_err_probe instead, which also takes care of
storing the message as reason for deferring.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221216190945.902754-1-marijn.suijten@somainline.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221209233202.222083-1-colin.i.king@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The Makefile is sorted by a module name, keep it that way.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-11-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Sort header inclusion alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-10-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

PM callbacks take struct device pointer as a parameter, use
dev_get_drvdata() to retrieve it instead of unneeded double
loop of referencing via i2c_get_clientdata(to_i2c_client(dev)).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-9-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We have a temporary variable to keep pointer to struct device.
Utilise it inside the ->probe() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-8-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is no in-kernel user for legacy platform data.
Otherwise, a new one can use software nodes instead.
Hence, drop legacy platform data code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-7-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Code can be a bit simpler with dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-6-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The CALIB_FRAC() is defined and might had been used in
tsl2563_calib_from_sysfs(). But let's just move a comment
from it to the latter function.

CLAIB_FRAC_HALF is used in a single place, i.e. in
tsl2563_calib_to_sysfs(). So, let's just inline it there.

While at it, switch to use DIV_ROUND_CLOSEST().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-5-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Make use of BIT() and GENMASK() where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-4-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Introduce tsl2563_configure_irq() to configure INT in one place.

While at it, make use of TSL2563_INT_LEVEL and newly introduced
TSL2563_INT_MASK.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-3-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Driver already uses the word accessors when it makes sense, but
in the tsl2563_configure(). Switch the latter to use word accessor.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-2-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_RAISING,
let's respect the settings specified in the firmware description.
To be compatible with the older firmware descriptions, if trigger
type is not set up there, we'll set it to default (raising edge).

Fixes: 388be488 ("staging:iio: tsl2563 abi fixes and interrupt handling")
Fixes: bdab1001 ("staging:iio:light:tsl2563 remove old style event registration.")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221207190348.9347-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-133-uwe@kleine-koenig.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

All the remaining calls in probe() have devm_ equivalents so
switching to those allows the remove() callbacks to be deleted.
No functional change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20221016163409.320197-15-jic23@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver only turns the power on at probe and off at remove.
The new devm_regulator_get_enable() replaces this boilerplate code.
Some additional refactoring to drop now unnecessary unwinding after
this change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20221016163409.320197-14-jic23@kernel.org

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jagath Jog J <jagathjog1996@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20221016163409.320197-3-jic23@kernel.org

Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212011156314630626@zte.com.cnSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212011142333790361@zte.com.cnSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

AD5337 belongs to the same family as the AD5338.

The difference is that the AD5337 has 8-bit precision instead of 10-bit.

Add support for the AD5337 chip in the driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20221130182632.3856675-2-festevam@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

AD5337 belongs to the same family as the AD5338.

The difference is that the AD5337 has 8-bit resolution instead of 10-bit.

Add a compatible entry for AD5337.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221130182632.3856675-1-festevam@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The TI LMP92064 is a dual 12 Bit ADC connected via SPI.
The two channels are intended for simultaneous measurements of the voltage
across- and current through a load to allow accurate instantaneous power
measurements.
The driver does not yet take advantage of this feature, as buffering is not
yet implemented.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/r/20221128133503.1355898-2-l.goehrs@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add binding documentation for the TI LMP92064 dual channel SPI ADC.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221128133503.1355898-1-l.goehrs@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>