568894ed ("sched_ext: Add scx_cgroup_enabled to gate cgroup operations
and fix scx_tg_online()") assumed that scx_cgroup_exit() is only called
after scx_cgroup_init() finished successfully. This isn't true.
scx_cgroup_exit() can be called without scx_cgroup_init() being called at
all or after scx_cgroup_init() failed in the middle.

As init state is tracked per cgroup, scx_cgroup_exit() can be used safely to
clean up in all cases. Remove the incorrect WARN_ON_ONCE().
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 568894ed ("sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()")

When the BPF scheduler fails, ops.exit() allows rich error reporting through
scx_exit_info. Use scx.exit() path consistently for all failures which can
be caused by the BPF scheduler:

- scx_ops_error() is called after ops.init() and ops.cgroup_init() failure
  to record error information.

- ops.init_task() failure now uses scx_ops_error() instead of pr_err().

- The err_disable path updated to automatically trigger scx_ops_error() to
  cover cases that the error message hasn't already been generated and
  always return 0 indicating init success so that the error is reported
  through ops.exit().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>

Fix build errors by adding __weak markers to BPF helper function
declarations in header files. This resolves static assertion failures
in scx_qmap.bpf.c and scx_flatcg.bpf.c where functions like
scx_bpf_dispatch_from_dsq_set_slice, scx_bpf_dispatch_from_dsq_set_vtime,
and scx_bpf_task_cgroup were missing the __weak attribute.

[1] https://lore.kernel.org/all/ZvvfUqRNM4-jYQzH@linux.ibm.comSigned-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

select_rq_task() already checked that 'p->nr_cpus_allowed > 1',
'p->nr_cpus_allowed == 1' checker in scx_select_cpu_dfl() is redundant.
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The enable path uses three big locks - scx_fork_rwsem, scx_cgroup_rwsem and
cpus_read_lock. Currently, the locks are grabbed together which is prone to
locking order problems.

For example, currently, there is a possible deadlock involving
scx_fork_rwsem and cpus_read_lock. cpus_read_lock has to nest inside
scx_fork_rwsem due to locking order existing in other subsystems. However,
there exists a dependency in the other direction during hotplug if hotplug
needs to fork a new task, which happens in some cases. This leads to the
following deadlock:

       scx_ops_enable()                               hotplug

                                          percpu_down_write(&cpu_hotplug_lock)
   percpu_down_write(&scx_fork_rwsem)
   block on cpu_hotplug_lock
                                          kthread_create() waits for kthreadd
					  kthreadd blocks on scx_fork_rwsem

Note that this doesn't trigger lockdep because the hotplug side dependency
bounces through kthreadd.

With the preceding scx_cgroup_enabled change, this can be solved by
decoupling cpus_read_lock, which is needed for static_key manipulations,
from the other two locks.

- Move the first block of static_key manipulations outside of scx_fork_rwsem
  and scx_cgroup_rwsem. This is now safe with the preceding
  scx_cgroup_enabled change.

- Drop scx_cgroup_rwsem and scx_fork_rwsem between the two task iteration
  blocks so that __scx_ops_enabled static_key enabling is outside the two
  rwsems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: http://lkml.kernel.org/r/8cd0ec0c4c7c1bc0119e61fbef0bee9d5e24022d.camel@linux.ibm.com

The disable path uses three big locks - scx_fork_rwsem, scx_cgroup_rwsem and
cpus_read_lock. Currently, the locks are grabbed together which is prone to
locking order problems. With the preceding scx_cgroup_enabled change, we can
decouple them:

- As cgroup disabling no longer requires modifying a static_key which
  requires cpus_read_lock(), no need to grab cpus_read_lock() before
  grabbing scx_cgroup_rwsem.

- cgroup can now be independently disabled before tasks are moved back to
  the fair class.

Relocate scx_cgroup_exit() invocation before scx_fork_rwsem is grabbed, drop
now unnecessary cpus_read_lock() and move static_key operations out of
scx_fork_rwsem. This decouples all three locks in the disable path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: http://lkml.kernel.org/r/8cd0ec0c4c7c1bc0119e61fbef0bee9d5e24022d.camel@linux.ibm.com

If the BPF scheduler does not implement ops.cgroup_init(), scx_tg_online()
didn't set SCX_TG_INITED which meant that ops.cgroup_exit(), even if
implemented, won't be called from scx_tg_offline(). This is because
SCX_HAS_OP(cgroupt_init) is used to test both whether SCX cgroup operations
are enabled and ops.cgroup_init() exists.

Fix it by introducing a separate bool scx_cgroup_enabled to gate cgroup
operations and use SCX_HAS_OP(cgroup_init) only to test whether
ops.cgroup_init() exists. Make all cgroup operations consistently use
scx_cgroup_enabled to test whether cgroup operations are enabled.
scx_cgroup_enabled is added instead of using scx_enabled() to ease planned
locking updates.
Signed-off-by: Tejun Heo <tj@kernel.org>

scx_ops_init_task() and the follow-up scx_ops_enable_task() in the fork path
were gated by scx_enabled() test and thus __scx_ops_enabled had to be turned
on before the first scx_ops_init_task() loop in scx_ops_enable(). However,
if an external entity causes sched_class switch before the loop is complete,
tasks which are not initialized could be switched to SCX.

The following can be reproduced by running a program which keeps toggling a
process between SCHED_OTHER and SCHED_EXT using sched_setscheduler(2).

  sched_ext: Invalid task state transition 0 -> 3 for fish[1623]
  WARNING: CPU: 1 PID: 1650 at kernel/sched/ext.c:3392 scx_ops_enable_task+0x1a1/0x200
  ...
  Sched_ext: simple (enabling)
  RIP: 0010:scx_ops_enable_task+0x1a1/0x200
  ...
   switching_to_scx+0x13/0xa0
   __sched_setscheduler+0x850/0xa50
   do_sched_setscheduler+0x104/0x1c0
   __x64_sys_sched_setscheduler+0x18/0x30
   do_syscall_64+0x7b/0x140
   entry_SYSCALL_64_after_hwframe+0x76/0x7e

Fix it by gating scx_ops_init_task() separately using
scx_ops_init_task_enabled. __scx_ops_enabled is now set after all tasks are
finished with scx_ops_init_task().
Signed-off-by: Tejun Heo <tj@kernel.org>

scx_ops_enable() has two task iteration loops. The first one calls
scx_ops_init_task() on every task and the latter switches the eligible ones
into SCX. The first loop left the tasks in SCX_TASK_INIT state and then the
second loop switched it into READY before switching the task into SCX.

The distinction between INIT and READY is only meaningful in the fork path
where it's used to tell whether the task finished forking so that we can
tell ops.exit_task() accordingly. Leaving task in INIT state between the two
loops is incosistent with the fork path and incorrect. The following can be
triggered by running a program which keeps toggling a task between
SCHED_OTHER and SCHED_SCX while enabling a task:

  sched_ext: Invalid task state transition 1 -> 3 for fish[1526]
  WARNING: CPU: 2 PID: 1615 at kernel/sched/ext.c:3393 scx_ops_enable_task+0x1a1/0x200
  ...
  Sched_ext: qmap (enabling+all)
  RIP: 0010:scx_ops_enable_task+0x1a1/0x200
  ...
   switching_to_scx+0x13/0xa0
   __sched_setscheduler+0x850/0xa50
   do_sched_setscheduler+0x104/0x1c0
   __x64_sys_sched_setscheduler+0x18/0x30
   do_syscall_64+0x7b/0x140
   entry_SYSCALL_64_after_hwframe+0x76/0x7e

Fix it by transitioning to READY in the first loop right after
scx_ops_init_task() succeeds.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>

scx_ops_enable() used preempt_disable() around the task iteration loop to
switch tasks into SCX to guarantee forward progress of the task which is
running scx_ops_enable(). However, in the gap between setting
__scx_ops_enabled and preeempt_disable(), an external entity can put tasks
including the enabling one into SCX prematurely, which can lead to
malfunctions including stalls.

The bypass mode can wrap the entire enabling operation and guarantee forward
progress no matter what the BPF scheduler does. Use the bypass mode instead
to guarantee forward progress while enabling.

While at it, release and regrab scx_tasks_lock between the two task
iteration locks in scx_ops_enable() for clarity as there is no reason to
keep holding the lock between them.
Signed-off-by: Tejun Heo <tj@kernel.org>

The distinction between SCX_OPS_PREPPING and SCX_OPS_ENABLING is not used
anywhere and only adds confusion. Drop SCX_OPS_PREPPING.
Signed-off-by: Tejun Heo <tj@kernel.org>

check_hotplug_seq() is used to detect CPU hotplug event which occurred while
the BPF scheduler is being loaded so that initialization can be retried if
CPU hotplug events take place before the CPU hotplug callbacks are online.

As such, the best place to call it is in the same cpu_read_lock() section
that enables the CPU hotplug ops. Currently, it is called in the next
cpus_read_lock() block in scx_ops_enable(). The side effect of this
placement is a small window in which hotplug sequence detection can trigger
unnecessarily, which isn't critical.

Move check_hotplug_seq() invocation to the same cpus_read_lock() block as
the hotplug operation enablement to close the window and get the invocation
out of the way for planned locking updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>

While bypassing, tasks are scheduled in FIFO order which favors tasks that
hog CPUs. This can slow down e.g. unloading of the BPF scheduler. While
bypassing, guaranteeing timely forward progress is the main goal. There's no
point in giving long slices. Shorten the time slice used while bypassing
from 20ms to 5ms.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>

In the bypass mode, the global DSQ is used to schedule all tasks in simple
FIFO order. All tasks are queued into the global DSQ and all CPUs try to
execute tasks from it. This creates a lot of cross-node cacheline accesses
and scheduling across the node boundaries, and can lead to live-lock
conditions where the system takes tens of minutes to disable the BPF
scheduler while executing in the bypass mode.

Split the global DSQ per NUMA node. Each node has its own global DSQ. When a
task is dispatched to SCX_DSQ_GLOBAL, it's put into the global DSQ local to
the task's CPU and all CPUs in a node only consume its node-local global
DSQ.

This resolves a livelock condition which could be reliably triggered on an
2x EPYC 7642 system by running `stress-ng --race-sched 1024` together with
`stress-ng --workload 80 --workload-threads 10` while repeatedly enabling
and disabling a SCX scheduler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>

To prepare for the addition of find_global_dsq(). No functional changes.
Signed-off-by: tejun heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>

sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()

SCX_DSQ_GLOBAL is special in that it can't be used as a priority queue and
is consumed implicitly, but all BPF DSQ related kfuncs could be used on it.
SCX_DSQ_GLOBAL will be split per-node for scalability and those operations
won't make sense anymore. Disallow SCX_DSQ_GLOBAL on scx_bpf_consume(),
scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new(). This means that
SCX_DSQ_GLOBAL can only be used as a dispatch target from BPF schedulers.

With scx_flatcg, which was using SCX_DSQ_GLOBAL as the fallback DSQ,
updated, this shouldn't affect any schedulers.

This leaves find_dsq_for_dispatch() the only user of find_non_local_dsq().
Open code and remove find_non_local_dsq().
Signed-off-by: tejun heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>

scx_flatcg was using SCX_DSQ_GLOBAL for fallback handling. However, it is
assuming that SCX_DSQ_GLOBAL isn't automatically consumed, which was true a
while ago but is no longer the case. Also, there are further changes planned
for SCX_DSQ_GLOBAL which will disallow explicit consumption from it. Switch
to a user DSQ for fallback.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>

Receive misc tools/sched_ext updates from https://github.com/sched-ext/scx
to sync userspace bits.

- LSP macros to help language servers.

- bpf_cpumask_weight() declaration and cast_mask() helper.

- Cosmetic updates to scx_flatcg.bpf.c.
Signed-off-by: Tejun Heo <tj@kernel.org>

cgroup support and scx_bpf_dispatch[_vtime]_from_dsq() are newly added since
8bb30798 ("sched_ext: Fixes incorrect type in bpf_scx_init()") which is
the current earliest commit targeted by BPF schedulers. Add compat helpers
for them and apply them in the example schedulers.

These will be dropped after a few kernel releases. The exact backward
compatibility window hasn't been decided yet.
Signed-off-by: Tejun Heo <tj@kernel.org>

move_remote_task_to_local_dsq() is only defined on SMP configs but
scx_disaptch_from_dsq() was calling move_remote_task_to_local_dsq() on UP
configs too causing build failures. Add a dummy
move_remote_task_to_local_dsq() which triggers a warning.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 4c30f5ce ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409241108.jaocHiDJ-lkp@intel.com/

Pull Kbuild updates from Masahiro Yamada:

 - Support cross-compiling linux-headers Debian package and kernel-devel
   RPM package

 - Add support for the linux-debug Pacman package

 - Improve module rebuilding speed by factoring out the common code to
   scripts/module-common.c

 - Separate device tree build rules into scripts/Makefile.dtbs

 - Add a new script to generate modules.builtin.ranges, which is useful
   for tracing tools to find symbols in built-in modules

 - Refactor Kconfig and misc tools

 - Update Kbuild and Kconfig documentation

* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: doc: replace "gcc" in external module description
  kbuild: doc: describe the -C option precisely for external module builds
  kbuild: doc: remove the description about shipped files
  kbuild: doc: drop section numbering, use references in modules.rst
  kbuild: doc: throw out the local table of contents in modules.rst
  kbuild: doc: remove outdated description of the limitation on -I usage
  kbuild: doc: remove description about grepping CONFIG options
  kbuild: doc: update the description about Kbuild/Makefile split
  kbuild: remove unnecessary export of RUST_LIB_SRC
  kbuild: remove append operation on cmd_ld_ko_o
  kconfig: cache expression values
  kconfig: use hash table to reuse expressions
  kconfig: refactor expr_eliminate_dups()
  kconfig: add comments to expression transformations
  kconfig: change some expr_*() functions to bool
  scripts: move hash function from scripts/kconfig/ to scripts/include/
  kallsyms: change overflow variable to bool type
  kallsyms: squash output_address()
  kbuild: add install target for modules.builtin.ranges
  scripts: add verifier script for builtin module range data
  ...

Merge tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux

Pull cpupower updates from Shuah Khan
 "The 'raw_pylibcpupower.i' file was being removed by "make mrproper".

  That was because '*.i', '.s' and '*.o' files are generated during
  kernel compile and removed when the repo is cleaned by mrproper.

  Rename it to use .swg extension instead to avoid the problem.

  A second patch removes references to it from .gitignore"

* tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
  pm: cpupower: Clean up bindings gitignore
  pm: cpupower: rename raw_pylibcpupower.i

Pull i3c updates from Alexandre Belloni:
 "This adds support for the I3C HCI controller of the AMD SoC which as
  expected requires quirks. Also fixes for the other drivers, including
  rate selection fixes for svc.

  Core:
   - allow adjusting first broadcast address speed

  Drivers:
   - cdns: few fixes
   - mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
     get_i3c_mode
   - svc: adjust rates, fix race condition"

* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
  i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
  i3c: master: svc: adjust SDR according to i3c spec
  i3c: master: svc: use slow speed for first broadcast address
  i3c: master: support to adjust first broadcast address speed
  i3c/master: cmd_v1: Fix the rule for getting i3c mode
  i3c: master: cdns: fix module autoloading
  i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
  i3c: mipi-i3c-hci: Add a quirk to set timing parameters
  i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
  i3c: mipi-i3c-hci: Add a quirk to set PIO mode
  i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
  i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List

The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that
driver in turn depends on other things, which the k4-m4 driver didn't.

This causes a Kconfig time warning:

  WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
    Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
    Selected by [m]:
    - TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])

because you can't select something that is unavailable.

Make the dependencies for TI_K3_M4_REMOTEPROC match those of the
OMAP2PLUS_MBOX driver that it needs.

Fixes: ebcf9008 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input updates from Dmitry Torokhov:

 - support for PixArt PS/2 touchpad

 - updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers

 - support for GPIO-only mode for ADP55888 controller

 - support for touch keys in Zinitix driver

 - support for querying density of Synaptics sensors

 - sysfs interface for Goodex "Berlin" devices to read and write touch
   IC registers

 - more quirks to i8042 to handle various Tuxedo laptops

 - a number of drivers have been converted to using "guard" notation
   when acquiring various locks, as well as using other cleanup
   functions to simplify releasing of resources (with more drivers to
   follow)

 - evdev will limit amount of data that can be written into an evdev
   instance at a given time to 4096 bytes (170 input events) to avoid
   holding evdev->mutex for too long and starving other users

 - Spitz has been converted to use software nodes/properties to describe
   its matrix keypad and GPIO-connected LEDs

 - msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
   removed since noone in mainline have been using them

 - other assorted cleanups and fixes

* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
  ARM: spitz: fix compile error when matrix keypad driver is enabled
  Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
  Input: adp5588-keys - fix check on return code
  Input: Convert comma to semicolon
  Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
  Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
  Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
  Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
  Input: ims-pcu - fix calling interruptible mutex
  Input: zforce_ts - switch to using asynchronous probing
  Input: zforce_ts - remove assert/deassert wrappers
  Input: zforce_ts - do not hardcode interrupt level
  Input: zforce_ts - switch to using devm_regulator_get_enable()
  Input: zforce_ts - stop treating VDD regulator as optional
  Input: zforce_ts - make zforce_idtable constant
  Input: zforce_ts - use dev_err_probe() where appropriate
  Input: zforce_ts - do not ignore errors when acquiring regulator
  Input: zforce_ts - make parsing of contacts less confusing
  Input: zforce_ts - switch to using get_unaligned_le16
  Input: zforce_ts - use guard notation when acquiring mutexes
  ...

Pull hwspinlock update from Bjorn Andersson:
 "This converts the Spreadtrum hardware spinlock DeviceTree binding to
  YAML, to allow validation of related DeviceTree source"

* tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: sprd-hwspinlock: convert to YAML

Pull rpmsg updates from Bjorn Andersson:

 - Minor cleanup/refactor to the Qualcomm GLINK code, in order to add
   trace events related to the messages exchange with the remote side,
   useful for debugging a range of interoperability issues

 - Rewrite the nested structs with flexible array members in order to
   avoid the risk of invalid accesses

* tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
  rpmsg: glink: Introduce packet tracepoints
  rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
  rpmsg: glink: Tidy up RX advance handling

Pull remoteproc updates from Bjorn Andersson:

 - Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
   the TI K3 family, support for the modem remoteproc in the Qualcomm
   SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
   SA8775P.

 - Add support for blocking and non-blocking mailbox transmissions to
   the i.MX remoteproc driver, and implement poweroff and reboot
   mechanisms using them. Plus a few bug fixes and minor improvements.

 - Cleanups and bug fixes for the TI K3 DSP and R5F drivers

 - Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores

 - Use devres helpers for various allocations in the Ingenic, TI DA8xx,
   TI Keystone, TI K3, ST slim drivers

 - Replace uses of of_{find,get}_property() with of_property_present()
   where possible

* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
  remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
  remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
  remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
  remoteproc: xlnx: Add sram support
  remoteproc: k3-r5: Fix error handling when power-up failed
  remoteproc: imx_rproc: Add support for poweroff and reboot
  remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
  remoteproc: k3-r5: Delay notification of wakeup event
  remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
  remoteproc: k3: Factor out TI-SCI processor control OF get function
  dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
  remoteproc: k3-dsp: Acquire mailbox handle during probe routine
  remoteproc: k3-r5: Acquire mailbox handle during probe routine
  remoteproc: k3-r5: Use devm_rproc_alloc() helper
  remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
  remoteproc: qcom: pas: Add SDX75 remoteproc support
  dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
  remoteproc: keystone: Use devm_rproc_alloc() helper
  remoteproc: keystone: Use devm_kasprintf() to build name string
  dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
  ...

Pull VFIO updates from Alex Williamson:
 "Just a few cleanups this cycle:

   - Remove several unused structure and function declarations, and
     unused variables (Dr. David Alan Gilbert, Yue Haibing, Zhang Zekun)

   - Constify unmodified structure in mdev (Hongbo Li)

   - Convert to unsigned type to catch overflow with less fanfare than
     passing a negative value to kcalloc() (Dan Carpenter)"

* tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/pci: clean up a type in vfio_pci_ioctl_pci_hot_reset_groups()
  vfio/mdev: Constify struct kobj_type
  vfio: mdev: Remove unused function declarations
  vfio/fsl-mc: Remove unused variable 'hwirq'
  vfio/pci: Remove unused struct 'vfio_pci_mmap_vma'

Pull dma-mapping fixes from Christoph Hellwig:

 - sort out a few issues with the direct calls to iommu-dma (Christoph
   Hellwig, Leon Romanovsky)

* tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: report unlimited DMA addressing in IOMMU DMA path
  iommu/dma: remove most stubs in iommu-dma.h
  dma-mapping: fix vmap and mmap of noncontiougs allocations

Pull iommufd updates from Jason Gunthorpe:
 "Collection of small cleanup and one fix:

   - Sort headers and struct forward declarations

   - Fix random selftest failures in some cases due to dirty tracking
     tests

   - Have the reserved IOVA regions mechanism work when a HWPT is used
     as a nesting parent. This updates the nesting parent's IOAS with
     the reserved regions of the device and will also install the ITS
     doorbell page on ARM.

   - Add missed validation of parent domain ops against the current
     iommu

   - Fix a syzkaller bug related to integer overflow during ALIGN()

   - Tidy two iommu_domain attach paths"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommu: Set iommu_attach_handle->domain in core
  iommufd: Avoid duplicated __iommu_group_set_core_domain() call
  iommufd: Protect against overflow of ALIGN() during iova allocation
  iommufd: Reorder struct forward declarations
  iommufd: Check the domain owner of the parent before creating a nesting domain
  iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
  iommufd/selftest: Fix buffer read overrrun in the dirty test
  iommufd: Reorder include files

Pull rdma updates from Jason Gunthorpe:
 "Usual collection of small improvements and fixes, nothing especially
  stands out to me here.

  The new multipath PCI feature is a sign of things to come, I think we
  will see more of this in the next 10 years. Broadcom and HNS continue
  to update their drivers for their new HW generations.

  Summary:

   - Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
     hfi, erdma, hns, irdma

   - Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls

   - Multipath PCI for mlx5

   - Variable size work queue, SRQ changes, and relaxed ordering for new
     bnxt HW

   - New ODP fault resolution FW protocol in mlx5

   - New 'rdma monitor' netlink mechanism"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
  RDMA/bnxt_re: Remove the unused variable en_dev
  RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
  RDMA/irdma: fix error message in irdma_modify_qp_roce()
  RDMA/cxgb4: Added NULL check for lookup_atid
  RDMA/hns: Fix ah error counter in sw stat not increasing
  RDMA/bnxt_re: Recover the device when FW error is detected
  RDMA/bnxt_re: Group all operations under add_device and remove_device
  RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
  RDMA/bnxt_re: Change aux driver data to en_info to hold more information
  RDMA/nldev: Expose whether RDMA monitoring is supported
  RDMA/nldev: Add support for RDMA monitoring
  RDMA/mlx5: Use IB set_netdev and get_netdev functions
  RDMA/device: Remove optimization in ib_device_get_netdev()
  RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
  RDMA/mlx5: Obtain upper net device only when needed
  RDMA/mlx5: Check RoCE LAG status before getting netdev
  RDMA/mlx5: Consider the query_vuid cap for data_direct
  net/mlx5: Handle memory scheme ODP capabilities
  RDMA/mlx5: Add implicit MR handling to ODP memory scheme
  RDMA/mlx5: Add handling for memory scheme page fault events
  ...

Merge tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext

Pull sched_ext fixes from Tejun Heo:

 - Three build fixes

 - The fix for a stall bug introduced by a recent optimization in sched
   core (SM_IDLE)

 - Addition of /sys/kernel/sched_ext/enable_seq. While not a fix, it is
   a simple addition that distro people want to be able to tell whether
   an SCX scheduler has ever been loaded on the system

* tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
  sched_ext: Provide a sysfs enable_seq counter
  sched_ext: Fix build when !CONFIG_STACKTRACE
  sched, sched_ext: Disable SM_IDLE/rq empty path when scx_enabled()
  sched: Put task_group::idle under CONFIG_GROUP_SCHED_WEIGHT
  sched: Add dummy version of sched_group_set_idle()

Pull more io_uring updates from Jens Axboe:
 "Mostly just a set of fixes in here, or little changes that didn't get
  included in the initial pull request. This contains:

   - Move the SQPOLL napi polling outside the submission lock (Olivier)

   - Rename of the "copy buffers" API that got added in the 6.12 merge
     window. There's really no copying going on, it's just referencing
     the buffers. After a bit of consideration, decided that it was
     better to simply rename this to avoid potential confusion (me)

   - Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
     start + len tracking rather than having start / end in there, and
     by removing the caching of folio_mask when we can just calculate it
     from folio_shift when we need it (me)

   - Fixes for the SQPOLL affinity checking (me, Felix)

   - Fix for how cqring waiting checks for the presence of task_work.
     Just check it directly rather than check for a specific
     notification mechanism (me)

   - Tweak to how request linking is represented in tracing (me)

   - Fix a syzbot report that deliberately sets up a huge list of
     overflow entries, and then hits rcu stalls when flushing this list.
     Just check for the need to preempt, and drop/reacquire locks in the
     loop. There's no state maintained over the loop itself, and each
     entry is yanked from head-of-list (me)"

* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
  io_uring: check if we need to reschedule during overflow flush
  io_uring: improve request linking trace
  io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
  io_uring/sqpoll: do the napi busy poll outside the submission block
  io_uring: clean up a type in io_uring_register_get_file()
  io_uring/sqpoll: do not put cpumask on stack
  io_uring/sqpoll: retain test for whether the CPU is valid
  io_uring/rsrc: change ubuf->ubuf_end to length tracking
  io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
  io_uring: rename "copy buffers" to "clone buffers"

Pull sysctl update from Joel Granados:

 - Avoid evaluating non-mount ctl_tables as a sysctl_mount_point by
   removing the unlikely (but possible) chance that the permanently
   empty ctl_table array shares its address with another ctl_table

 - Update Joel Granados' contact info in MAINTAINERS

* tag 'sysctl-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
  MAINTAINERS: update email for Joel Granados
  sysctl: avoid spurious permanent empty tables

Pull RISC-V updates from Palmer Dabbelt:

 - Support using Zkr to seed KASLR

 - Support IPI-triggered CPU backtracing

 - Support for generic CPU vulnerabilities reporting to userspace

 - A few cleanups for missing licenses

 - The size limit on the XIP kernel has been removed

 - Support for tracing userspace stacks

 - Support for the Svvptc extension

 - Various cleanups and fixes throughout the tree

* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
  crash: Fix riscv64 crash memory reserve dead loop
  perf/riscv-sbi: Add platform specific firmware event handling
  tools: Optimize ring buffer for riscv
  tools: Add riscv barrier implementation
  RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
  ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  riscv: Enable bitops instrumentation
  riscv: Omit optimized string routines when using KASAN
  ACPI: RISCV: Make acpi_numa_get_nid() to be static
  riscv: Randomize lower bits of stack address
  selftests: riscv: Allow mmap test to compile on 32-bit
  riscv: Make riscv_isa_vendor_ext_andes array static
  riscv: Use LIST_HEAD() to simplify code
  riscv: defconfig: Disable RZ/Five peripheral support
  RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
  riscv: avoid Imbalance in RAS
  riscv: cacheinfo: Add back init_cache_level() function
  riscv: Remove unused _TIF_WORK_MASK
  drivers/perf: riscv: Remove redundant macro check
  riscv: define ILLEGAL_POINTER_VALUE for 64bit
  ...

Pull m68knommu fixlet from Greg Ungerer:
 "Only a single change, cleaning up white space in debug message"

* tag 'm68knommu-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: remove trailing space after \n newline

Pull crypto fixes from Herbert Xu:

 - Disable buggy p10 aes-gcm code on powerpc

 - Fix module aliases in paes_s390

 - Fix buffer overread in caam

* tag 'v6.12-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: powerpc/p10-aes-gcm - Disable CRYPTO_AES_GCM_P10
  crypto: s390/paes - Fix module aliases
  crypto: caam - Pad SG length when allocating hash edesc

Pull landlock updates from Mickaël Salaün:
 "We can now scope a Landlock domain thanks to a new "scoped" field that
  can deny interactions with resources outside of this domain.

  The LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET flag denies connections to an
  abstract UNIX socket created outside of the current scoped domain, and
  the LANDLOCK_SCOPE_SIGNAL flag denies sending a signal to processes
  outside of the current scoped domain.

  These restrictions also apply to nested domains according to their
  scope. The related changes will also be useful to support other kind
  of IPC isolations"

* tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Document LANDLOCK_SCOPE_SIGNAL
  samples/landlock: Add support for signal scoping
  selftests/landlock: Test signal created by out-of-bound message
  selftests/landlock: Test signal scoping for threads
  selftests/landlock: Test signal scoping
  landlock: Add signal scoping
  landlock: Document LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET
  samples/landlock: Add support for abstract UNIX socket scoping
  selftests/landlock: Test inherited restriction of abstract UNIX socket
  selftests/landlock: Test connected and unconnected datagram UNIX socket
  selftests/landlock: Test UNIX sockets with any address formats
  selftests/landlock: Test abstract UNIX socket scoping
  selftests/landlock: Test handling of unknown scope
  landlock: Add abstract UNIX socket scoping

Pull key updates from Jarkko Sakkinen:
 "The bulk of this is OpenSSL 3.0 compatibility fixes for the signing
  and certificates"

* tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  sign-file,extract-cert: use pkcs11 provider for OPENSSL MAJOR >= 3
  sign-file,extract-cert: avoid using deprecated ERR_get_error_line()
  sign-file,extract-cert: move common SSL helper functions to a header
  KEYS: prevent NULL pointer dereference in find_asymmetric_key()
  KEYS: Remove unused declarations