- 03 Mar, 2022 40 commits
-
-
Krzysztof Kozlowski authored
The llcp_sock_connect() error paths were using a mixed way of central exit (goto) and cleanup Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
Nullify the llcp_sock->dev on llcp_sock_connect() error paths, symmetrically to the code llcp_sock_bind(). The non-NULL value of llcp_sock->dev is used in a few places to check whether the socket is still valid. There was no particular issue observed with missing NULL assignment in connect() error path, however a similar case - in the bind() error path - was triggereable. That one was fixed in commit 4ac06a1e ("nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect"), so the change here seems logical as well. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== HW counters for soft devices Petr says: Offloading switch device drivers may be able to collect statistics of the traffic taking place in the HW datapath that pertains to a certain soft netdevice, such as a VLAN. In this patch set, add the necessary infrastructure to allow exposing these statistics to the offloaded netdevice in question, and add mlxsw offload. Across HW platforms, the counter itself very likely constitutes a limited resource, and the act of counting may have a performance impact. Therefore this patch set makes the HW statistics collection opt-in and togglable from userspace on a per-netdevice basis. Additionally, HW devices may have various limiting conditions under which they can realize the counter. Therefore it is also possible to query whether the requested counter is realized by any driver. In TC parlance, which is to a degree reused in this patch set, two values are recognized: "request" tracks whether the user enabled collecting HW statistics, and "used" tracks whether any HW statistics are actually collected. In the past, this author has expressed the opinion that `a typical user doing "ip -s l sh", including various scripts, wants to see the full picture and not worry what's going on where'. While that would be nice, unfortunately it cannot work: - Packets that trap from the HW datapath to the SW datapath would be double counted. For a given netdevice, some traffic can be purely a SW artifact, and some may flow through the HW object corresponding to the netdevice. But some traffic can also get trapped to the SW datapath after bumping the HW counter. It is not clear how to make sure double-counting does not occur in the SW datapath in that case, while still making sure that possibly divergent SW forwarding path gets bumped as appropriate. So simply adding HW and SW stats may work roughly, most of the time, but there are scenarios where the result is nonsensical. - HW devices will have limitations as to what type of traffic they can count. In case of mlxsw, which is part of this patch set, there is no reasonable way to count all traffic going through a certain netdevice, such as a VLAN netdevice enslaved to a bridge. It is however very simple to count traffic flowing through an L3 object, such as a VLAN netdevice with an IP address. Similarly for physical netdevices, the L3 object at which the counter is installed is the subport carrying untagged traffic. These are not "just counters". It is important that the user understands what is being counted. It would be incorrect to conflate these statistics with another existing statistics suite. To that end, this patch set introduces a statistics suite called "L3 stats". This label should make it easy to understand what is being counted, and to decide whether a given device can or cannot implement this suite for some type of netdevice. At the same time, the code is written to make future extensions easy, should a device pop up that can implement a different flavor of statistics suite (say L2, or an address-family-specific suite). For example, using a work-in-progress iproute2[1], to turn on and then list the counters on a VLAN netdevice: # ip stats set dev swp1.200 l3_stats on # ip stats show dev swp1.200 group offload subgroup l3_stats 56: swp1.200: group offload subgroup l3_stats on used on RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 The patchset progresses as follows: - Patch #1 is a cleanup. - In patch #2, remove the assumption that all LINK_OFFLOAD_XSTATS are dev-backed. The only attribute defined under the nest is currently IFLA_OFFLOAD_XSTATS_CPU_HIT. L3_STATS differs from CPU_HIT in that the driver that supplies the statistics is not the same as the driver that implements the netdevice. Make the code compatible with this in patch #2. - In patch #3, add the possibility to filter inside nests. The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. In this patch, the UAPI is extended to allow filtering inside IFLA_STATS_LINK_OFFLOAD_XSTATS in particular, but the scheme is easily extensible to other nests as well. - In patch #4, propagate extack where we need it. In patch #5, make it possible to propagate errors from drivers to the user. - In patch #6, add the in-kernel APIs for keeping track of the new stats suite, and the notifiers that the core uses to communicate with the drivers. - In patch #7, add UAPI for obtaining the new stats suite. - In patch #8, add a new UAPI message, RTM_SETSTATS, which will carry the message to toggle the newly-added stats suite. In patch #9, add the toggle itself. At this point the core is ready for drivers to add support for the new stats suite. - In patches #10, #11 and #12, apply small tweaks to mlxsw code. - In patch #13, add support for L3 stats, which are realized as RIF counters. - Finally in patch #14, a selftest is added to the net/forwarding directory. Technically this is a HW-specific test, in that without a HW implementing the counters, it just will not pass. But devices that support L3 statistics at all are likely to be able to reuse this selftest, so it seems appropriate to put it in the general forwarding directory. We also have a netdevsim implementation, and a corresponding selftest that verifies specifically some of the core code. We intend to contribute these later. Interested parties can take a look at the raw code at [2]. [1] https://github.com/pmachata/iproute2/commits/soft_counters [2] https://github.com/pmachata/linux_mlxsw/commits/petrm_soft_counters_2 v2: - Patch #3: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Use NLA_POLICY_NESTED to declare what the nest contents should be - Use NLA_POLICY_MASK instead of BITFIELD32 for the filtering attribute. - Patch #6: - s/monotonous/monotonic/ in commit message - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #7: - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #8: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Patch #13: - Use a newly-added struct rtnl_hw_stats64 for stats transfer ==================== Signed-off-by: -
Petr Machata authored
Add a test that verifies operation of L3 HW statistics. Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Petr Machata authored
Spectrum machines support L3 stats by binding a counter to a RIF, a hardware object representing a router interface. Recognize the netdevice notifier events, NETDEV_OFFLOAD_XSTATS_*, to support enablement, disablement, and reporting back to core. As a netdevice gains a RIF, if L3 stats are enabled, install the counters, and ping the core so that a userspace notification can be emitted. Similarly, as a netdevice loses a RIF, push the as-yet-unreported statistics to the core, so that they are not lost, and ping the core to emit userspace notification. Signed-off-by:
-
Petr Machata authored
Several more events are coming in the following patches, and extending the if statement is getting awkward. Instead, convert it to a switch. Signed-off-by:
-
Petr Machata authored
The mlxsw_sp reference is carried by the mlxsw_sp_rif object that is passed to these functions as well. Just deduce the former from the latter, and drop the explicit mlxsw_sp parameter. Adapt callers. Signed-off-by:
-
Petr Machata authored
The function mlxsw_reg_ritr_counter_pack() formats a register to configure a router interface (RIF) counter. The parameter `egress' determines whether an ingress or egress counter is to be configured. RITR, the register in question, has two sets of counter-related fields: one for ingress, one for egress. When setting values of the fields, the function sets the proper counter index field, but when setting the counter type, it always sets the egress field. Thus configuration of ingress counters is broken, and in fact an attempt to configure an ingress counter mangles a previously configured egress counter. This was never discovered, because there is currently no way to enable ingress counters on a router interface, only the egress one. Fix in an obvious way. Signed-off-by:
-
Petr Machata authored
The offloaded HW stats are designed to allow per-netdevice enablement and disablement. Add an attribute, IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS, which should be carried by the RTM_SETSTATS message, and expresses a desire to toggle L3 offload xstats on or off. As part of the above, add an exported function rtnl_offload_xstats_notify() that drivers can use when they have installed or deinstalled the counters backing the HW stats. At this point, it is possible to enable, disable and query L3 offload xstats on netdevices. (However there is no driver actually implementing these.) Signed-off-by:
-
Petr Machata authored
The offloaded HW stats are designed to allow per-netdevice enablement and disablement. These stats are only accessible through RTM_GETSTATS, and therefore should be toggled by a RTM_SETSTATS message. Add it, and the necessary skeleton handler. Signed-off-by:
-
Petr Machata authored
Add a new IFLA_STATS_LINK_OFFLOAD_XSTATS child attribute, IFLA_OFFLOAD_XSTATS_L3_STATS, to carry statistics for traffic that takes place in a HW router. The offloaded HW stats are designed to allow per-netdevice enablement and disablement. Additionally, as a netdevice is configured, it may become or cease being suitable for binding of a HW counter. Both of these aspects need to be communicated to the userspace. To that end, add another child attribute, IFLA_OFFLOAD_XSTATS_HW_S_INFO: - attr nest IFLA_OFFLOAD_XSTATS_HW_S_INFO - attr nest IFLA_OFFLOAD_XSTATS_L3_STATS - attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST - {0,1} as u8 - attr IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED - {0,1} as u8 Thus this one attribute is a nest that can be used to carry information about various types of HW statistics, and indexing is very simply done by wrapping the information for a given statistics suite into the attribute that carries the suite is the RTM_GETSTATS query. At the same time, because _HW_S_INFO is nested directly below IFLA_STATS_LINK_OFFLOAD_XSTATS, it is possible through filtering to request only the metadata about individual statistics suites, without having to hit the HW to get the actual counters. Signed-off-by: -
Petr Machata authored
Offloading switch device drivers may be able to collect statistics of the traffic taking place in the HW datapath that pertains to a certain soft netdevice, such as VLAN. Add the necessary infrastructure to allow exposing these statistics to the offloaded netdevice in question. The API was shaped by the following considerations: - Collection of HW statistics is not free: there may be a finite number of counters, and the act of counting may have a performance impact. It is therefore necessary to allow toggling whether HW counting should be done for any particular SW netdevice. - As the drivers are loaded and removed, a particular device may get offloaded and unoffloaded again. At the same time, the statistics values need to stay monotonic (modulo the eventual 64-bit wraparound), increasing only to reflect traffic measured in the device. To that end, the netdevice keeps around a lazily-allocated copy of struct rtnl_link_stats64. Device drivers then contribute to the values kept therein at various points. Even as the driver goes away, the struct stays around to maintain the statistics values. - Different HW devices may be able to count different things. The motivation behind this patch in particular is exposure of HW counters on Nvidia Spectrum switches, where the only practical approach to counting traffic on offloaded soft netdevices currently is to use router interface counters, and count L3 traffic. Correspondingly that is the statistics suite added in this patch. Other devices may be able to measure different kinds of traffic, and for that reason, the APIs are built to allow uniform access to different statistics suites. - Because soft netdevices and offloading drivers are only loosely bound, a netdevice uses a notifier chain to communicate with the drivers. Several new notifiers, NETDEV_OFFLOAD_XSTATS_*, have been added to carry messages to the offloading drivers. - Devices can have various conditions for when a particular counter is available. As the device is configured and reconfigured, the device offload may become or cease being suitable for counter binding. A netdevice can use a notifier type NETDEV_OFFLOAD_XSTATS_REPORT_USED to ping offloading drivers and determine whether anyone currently implements a given statistics suite. This information can then be propagated to user space. When the driver decides to unoffload a netdevice, it can use a newly-added function, netdev_offload_xstats_report_delta(), to record outstanding collected statistics, before destroying the HW counter. This patch adds a helper, call_netdevice_notifiers_info_robust(), for dispatching a notifier with the possibility of unwind when one of the consumers bails. Given the wish to eventually get rid of the global notifier block altogether, this helper only invokes the per-netns notifier block. Signed-off-by:
-
Petr Machata authored
Obtaining stats for the IFLA_STATS_LINK_OFFLOAD_XSTATS nest involves a HW access, and can fail for more reasons than just netlink message size exhaustion. Therefore do not always return -EMSGSIZE on the failure path, but respect the error code provided by the callee. Set the error explicitly where it is reasonable to assume -EMSGSIZE as the failure reason. Signed-off-by:
-
Petr Machata authored
Later patches add handlers for more HW-backed statistics. An extack will be useful when communicating HW / driver errors to the client. Add the arguments as appropriate. Signed-off-by:
-
Petr Machata authored
The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: -
Petr Machata authored
The IFLA_STATS_LINK_OFFLOAD_XSTATS attribute is a nest whose child attributes carry various special hardware statistics. The code that handles this nest was written with the idea that all these statistics would be exposed by the device driver of a physical netdevice. In the following patches, a new attribute is added to the abovementioned nest, which however can be defined for some soft netdevices. The NDO-based approach to querying these does not work, because it is not the soft netdevice driver that exposes these statistics, but an offloading NIC driver that does so. The current code does not scale well to this usage. Simply rewrite it back to the pattern seen in other fill-like and get_size-like functions elsewhere. Extract to helpers the code that is concerned with handling specifically NDO-backed statistics so that it can be easily reused should more such statistics be added. Signed-off-by:
-
Petr Machata authored
The currently used names rtnl_get_offload_stats() and rtnl_get_offload_stats_size() do not clearly show the namespace. The former function additionally seems to have been named this way in accordance with the NDO name, as opposed to the naming used in the rtnetlink.c file (and indeed elsewhere in the netlink handling code). As more and differently-flavored attributes are introduced, a common clear prefix is needed for all related functions. Rename the functions to follow the rtnl_offload_xstats_* naming scheme. Signed-off-by:
-
Manish Chopra authored
Today when VFs are put in promiscuous mode, they can request PF to configure device for them to receive all VLANs traffic regardless of what vlan is configured by the PF (via ip link) and PF allows this config request regardless of whether VF is trusted or not. From security POV, when VLAN is configured for VF through PF (via ip link), honour such config requests from VF only when they are configured to be trusted, otherwise restrict such VFs vlan promisc mode config. Cc: stable@vger.kernel.org Fixes: f990c82c ("qed*: Add support for ndo_set_vf_trust") Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
Driver does support SR-IOV VFs trust configuration but it does not display it when queried via ip link utility. Cc: stable@vger.kernel.org Fixes: f990c82c ("qed*: Add support for ndo_set_vf_trust") Signed-off-by:
-
David S. Miller authored
@ 2022-03-02 10:39 Bhupesh Sharma 2022-03-02 10:39 ` [PATCH v2 1/2 net-next] net: stmmac: Add support for SM8150 Bhupesh Sharma 2022-03-02 10:39 ` [PATCH v2 2/2 net-next] net: stmmac: dwmac-qcom-ethqos: Adjust rgmii loopback_en per platform Bhupesh Sharma 0 siblings, 2 replies; 3+ messages in thread Bhupesh Sharma says: ==================== net: stmmac: Enable support for Qualcomm SA8155p-ADP board Changes since v1: ----------------- - v1 can be seen here: https://lore.kernel.org/netdev/20220126221725.710167-1-bhupesh.sharma@linaro.org/t/ - Fixed review comments from Bjorn - broke the v1 series into two separate series - one each for 'net' tree and 'arm clock/dts' tree - so as to ease review of the same from the respective maintainers. - This series is intended for the 'net' tree. The SA8155p-ADP board supports on-board ethernet (Gibabit Interface), with support for both RGMII and RMII buses. This patchset adds the support for the same. Note that this patchset is based on an earlier sent patchset for adding PDC controller support on SM8150 (see [1]). [1]. https://lore.kernel.org/linux-arm-msm/20220226184028.111566-1-bhupesh.sharma@linaro.org/T/ ==================== Signed-off-by:
-
Bjorn Andersson authored
Not all platforms should have RGMII_CONFIG_LOOPBACK_EN and the result it about 50% packet loss on incoming messages. So make it possile to configure this per compatible and enable it for QCS404. Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Vinod Koul authored
This adds compatible, POR config & driver data for ethernet controller found in SM8150 SoC. Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Vinod Koul <vkoul@kernel.org> [bhsharma: Massage the commit log and other cosmetic changes] Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by:
-
David S. Miller authored
Joe Damato says: ==================== page_pool: Add stats counters Greetings: Welcome to v9. This revisions adds a commit which updates the page_pool documentation to describe the stats API, structures, and fields. Additionally, this revision contains a minor cosmetic change suggested by Saeed in page_pool_recycle_in_ring in commit 2: "page_pool: Add recycle stats", which removes an unnecessary #ifdef. There are no functional changes in this revision. Benchmark output from the v7 cover [1] is pasted below, as it is still relevant since no functional changes have been made in this revision: Benchmarks have been re-run. As always, results between runs are highly variable; you'll find results showing that stats disabled are both faster and slower than stats enabled in back to back benchmark runs. Raw benchmark output with stats off [2] and stats on [3] are available for examination. Test system: - 2x Intel(R) Xeon(R) Gold 6140 CPU @ 2.30GHz - 2 NUMA zones, with 18 cores per zone and 2 threads per core bench_page_pool_simple results, loops=200000000 test name stats enabled stats disabled cycles nanosec cycles nanosec for_loop 0 0.335 0 0.336 atomic_inc 14 6.106 13 6.022 lock 30 13.365 32 13.968 no-softirq-page_pool01 75 32.884 74 32.308 no-softirq-page_pool02 79 34.696 74 32.302 no-softirq-page_pool03 110 48.005 105 46.073 tasklet_page_pool01_fast_path 14 6.156 14 6.211 tasklet_page_pool02_ptr_ring 41 18.028 39 17.391 tasklet_page_pool03_slow 107 46.646 105 46.123 bench_page_pool_cross_cpu results, loops=20000000 returning_cpus=4: test name stats enabled stats disabled cycles nanosec cycles nanosec page_pool_cross_cpu CPU(0) 3973 1731.596 4015 1750.015 page_pool_cross_cpu CPU(1) 3976 1733.217 4022 1752.864 page_pool_cross_cpu CPU(2) 3973 1731.615 4016 1750.433 page_pool_cross_cpu CPU(3) 3976 1733.218 4021 1752.806 page_pool_cross_cpu CPU(4) 994 433.305 1005 438.217 page_pool_cross_cpu average 3378 - 3415 - bench_page_pool_cross_cpu results, loops=20000000 returning_cpus=8: test name stats enabled stats disabled cycles nanosec cycles nanosec page_pool_cross_cpu CPU(0) 6969 3037.488 6909 3011.463 page_pool_cross_cpu CPU(1) 6974 3039.469 6913 3012.961 page_pool_cross_cpu CPU(2) 6969 3037.575 6910 3011.585 page_pool_cross_cpu CPU(3) 6974 3039.415 6913 3012.961 page_pool_cross_cpu CPU(4) 6969 3037.288 6909 3011.368 page_pool_cross_cpu CPU(5) 6972 3038.732 6913 3012.920 page_pool_cross_cpu CPU(6) 6969 3037.350 6909 3011.386 page_pool_cross_cpu CPU(7) 6973 3039.356 6913 3012.921 page_pool_cross_cpu CPU(8) 871 379.934 864 376.620 page_pool_cross_cpu average 6293 - 6239 - Thanks. [1]: https://lore.kernel.org/all/1645810914-35485-1-git-send-email-jdamato@fastly.com/ [2]: https://gist.githubusercontent.com/jdamato-fsly/d7c34b9fa7be1ce132a266b0f2b92aea/raw/327dcd71d11ece10238fbf19e0472afbcbf22fd4/v7_stats_disabled [3]: https://gist.githubusercontent.com/jdamato-fsly/d7c34b9fa7be1ce132a266b0f2b92aea/raw/327dcd71d11ece10238fbf19e0472afbcbf22fd4/v7_stats_enabled v8 -> v9: - Add documentation about the page_pool_get_stats API, stats structures, and fields to Documentation/networking/page_pool.rst. - Remove unnecessary #ifdef in page_pool_recycle_in_ring. v7 -> v8: - Rename mlx5 ethtool stats so that users have a better idea of their meaning. v6 -> v7: - stats split out into two structs one single per-page pool struct for allocation path stats and one per-cpu pointer for recycle path stats. - page_pool_get_stats updated to use a wrapper struct to gather stats for allocation and recycle stats with a single argument. - placement of structs adjusted - mlx5 driver modified to use page_pool_get_stats API v5 -> v6: - Per cpu page_pool_stats struct pointer is now marked as ____cacheline_aligned_in_smp. Placement of the field in the struct is unchanged; it is the last field. v4 -> v5: - Fixed the description of the kernel option in Kconfig. - Squashed commits 1-10 from v4 into a single commit for easier review. - Changed the comment style of the comment for the this_cpu_inc_alloc_stat macro. - Changed the return type of page_pool_get_stats from struct page_pool_stat * to bool. v3 -> v4: - Restructured stats to be per-cpu per-pool. - Global stats and proc file were removed. - Exposed an API (page_pool_get_stats) for batching the pool stats. v2 -> v3: - patch 8/10 ("Add stat tracking cache refill") fixed placement of counter increment. - patch 10/10 ("net-procfs: Show page pool stats in proc") updated: - fix unused label warning from kernel test robot, - fixed page_pool_seq_show to only display the refill stat once, - added a remove_proc_entry for page_pool_stat to dev_proc_net_exit. v1 -> v2: - A new kernel config option has been added, which defaults to N, preventing this code from being compiled in by default - The stats structure has been converted to a per-cpu structure - The stats are now exported via proc (/proc/net/page_pool_stat) ==================== Signed-off-by:
-
Joe Damato authored
This change adds support for the page_pool_get_stats API to mlx5. If the user has enabled CONFIG_PAGE_POOL_STATS in their kernel, ethtool will output page pool stats. Signed-off-by:
Joe Damato <jdamato@fastly.com> Acked-by:
Saeed Mahameed <saeed@kernel.org> Signed-off-by:
-
Joe Damato authored
Add the new stats API, kernel config parameter, and stats structure information to the page_pool documentation. Signed-off-by:
-
Joe Damato authored
Adds a function page_pool_get_stats which can be used by drivers to obtain stats for a specified page_pool. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Joe Damato authored
Add per-cpu stats tracking page pool recycling events: - cached: recycling placed page in the page pool cache - cache_full: page pool cache was full - ring: page placed into the ptr ring - ring_full: page released from page pool because the ptr ring was full - released_refcnt: page released (and not recycled) because refcnt > 1 Signed-off-by:
-
Joe Damato authored
Add per-pool statistics counters for the allocation path of a page pool. These stats are incremented in softirq context, so no locking or per-cpu variables are needed. This code is disabled by default and a kernel config option is provided for users who wish to enable them. The statistics added are: - fast: successful fast path allocations - slow: slow path order-0 allocations - slow_high_order: slow path high order allocations - empty: ptr ring is empty, so a slow path allocation was forced. - refill: an allocation which triggered a refill of the cache - waive: pages obtained from the ptr ring that cannot be added to the cache due to a NUMA mismatch. Signed-off-by:
-
Tao Chen authored
Last tcp_write_queue_head() use was removed in commit 114f39fe ("tcp: restore autocorking"), so remove it. Signed-off-by:
Tao Chen <chentao3@hotmail.com> Link: https://lore.kernel.org/r/SYZP282MB33317DEE1253B37C0F57231E86029@SYZP282MB3331.AUSP282.PROD.OUTLOOK.COMSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kurt Kanzenbach authored
Network drivers such as igb or igc call eth_get_headlen() to determine the header length for their to be constructed skbs in receive path. When running HSR on top of these drivers, it results in triggering BUG_ON() in skb_pull(). The reason is the skb headlen is not sufficient for HSR to work correctly. skb_pull() notices that. For instance, eth_get_headlen() returns 14 bytes for TCP traffic over HSR which is not correct. The problem is, the flow dissection code does not take HSR into account. Therefore, add support for it. Reported-by:
Anthony Harivel <anthony.harivel@linutronix.de> Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20220228195856.88187-1-kurt@linutronix.deSigned-off-by:
-
Baruch Siach authored
Add support for direct RMII MAC mode. This allows hardware with CPU port connected in direct 100M fixed link to work properly. Signed-off-by:
Baruch Siach <baruch.siach@siklu.com> Link: https://lore.kernel.org/r/a962d1ccbeec42daa10dd8aff0e66e31f0faf1eb.1646050203.git.baruch@tkos.co.ilSigned-off-by:
-
Baruch Siach authored
When the given cmode has no serdes, mv88e6xxx_serdes_get_lane() returns -NODEV. Earlier in the same function the code skips serdes handing in this case. Do the same after cmode set. Signed-off-by:
-
Yang Li authored
Eliminate the following coccicheck warning: ./net/openvswitch/flow.c:379:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220227132208.24658-1-yang.lee@linux.alibaba.comSigned-off-by:
-
Baowen Zheng authored
Add extack message to return exact message to user when adding invalid filter with conflict flags for TC action. In previous implement we just return EINVAL which is confusing for user. Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Link: https://lore.kernel.org/r/1646191769-17761-1-git-send-email-baowen.zheng@corigine.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-03-01 This series contains updates to iavf driver only. Mateusz adds support for interrupt moderation for 50G and 100G speeds as well as support for the driver to specify a request as its primary MAC address. He also refactors VLAN V2 capability exchange into more generic extended capabilities to ease the addition of future capabilities. Finally, he corrects the incorrect return of iavf_status values and removes non-inclusive language. Minghao Chi removes unneeded variables, instead returning values directly. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: iavf: Remove non-inclusive language iavf: Fix incorrect use of assigning iavf_status to int iavf: stop leaking iavf_status as "errno" values iavf: remove redundant ret variable iavf: Add usage of new virtchnl format to set default MAC iavf: refactor processing of VLAN V2 capability message iavf: Add support for 50G/100G in AIM algorithm ==================== Link: https://lore.kernel.org/r/20220301185939.3005116-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Christophe JAILLET authored
Use ida_alloc_xxx()/ida_free() instead to ida_simple_get()/ida_simple_remove(). The latter is deprecated and more verbose. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220301131212.26348-1-simon.horman@corigine.comSigned-off-by:
-
Russell King (Oracle) authored
Convert sfp to use %pe for printing error codes, which can print them as errno symbols rather than numbers. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1nOyEN-00BuuE-OB@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Convert phylink to use %pe for printing error codes, which can print them as errno symbols rather than numbers. Signed-off-by:
-
Harold Huang authored
In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to tun_sendmsg. Although we donot use msg_controllen in this path, we should check msg_controllen to make sure the caller pass a valid msg_ctl. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Harold Huang <baymaxhuang@gmail.com> Acked-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Remove redundant 'flush_workqueue()' calls, by Christophe JAILLET - Migrate to linux/container_of.h, by Sven Eckelmann - Demote batadv-on-batadv skip error message, by Sven Eckelmann * tag 'batadv-next-pullrequest-20220302' of git://git.open-mesh.org/linux-merge: batman-adv: Demote batadv-on-batadv skip error message batman-adv: Migrate to linux/container_of.h batman-adv: Remove redundant 'flush_workqueue()' calls batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20220302163522.102842-1-sw@simonwunderlich.deSigned-off-by:
-
