- 22 Feb, 2020 26 commits
-
-
Geert Uytterhoeven authored
The cc_debugfs_ctx structure contains only a single member, and only one instance exists. Simplify the code and reduce memory consumption by moving this member to struct cc_drvdata. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Geert Uytterhoeven authored
The cc_sram_ctx structure contains only a single member, and only one instance exists. Simplify the code and reduce memory consumption by moving this member to struct cc_drvdata. Signed-off-by:
-
Geert Uytterhoeven authored
cc_pm_suspend() and cc_pm_resume() are not used outside drivers/crypto/ccree/cc_pm.c. Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_PM=y, cc_pm_is_dev_suspended() is just a wrapper around pm_runtime_suspended(). If CONFIG_PM=n, cc_pm_is_dev_suspended() a dummy that behaves exactly the same as the dummy for pm_runtime_suspended(). Hence remove cc_pm_is_dev_suspended(), and call pm_runtime_suspended() directly. Signed-off-by:
-
Geert Uytterhoeven authored
If the driver is probed, it means a match was found in arm_ccree_dev_of_match[]. Hence we can just use the of_device_get_match_data() helper. Signed-off-by:
-
Geert Uytterhoeven authored
Currently, a large part of the probe function runs before Runtime PM is enabled. As the driver manages the device's clock manually, this may work fine on some systems, but may break on platforms with a more complex power hierarchy. Fix this by moving the initialization of Runtime PM before the first register access (in cc_wait_for_reset_completion()), and putting the device to sleep only after the last access (in cc_set_ree_fips_status()). This allows to remove the pm_on flag, which was used to track manually if Runtime PM had been enabled or not. Remove the cc_pm_{init,go,fini}() wrappers, as they are called only once, and obscure operation. Signed-off-by: -
Geert Uytterhoeven authored
SRAM addresses are small integer offsets into local SRAM. Currently they are stored using a mixture of cc_sram_addr_t (u64), u32, and dma_addr_t types. Settle on u32, and remove the cc_sram_addr_t typedefs. This allows to drop several casts. Signed-off-by:
-
Geert Uytterhoeven authored
The SRAM allocator does not support deallocating memory. Hence remove all references to freeing SRAM. Fix grammar while at it. Signed-off-by:
-
Geert Uytterhoeven authored
While the larval digest addresses are not always used in cc_get_plain_hmac_key() and cc_hash_digest(), they are always calculated. Defer their calculations to the points where needed. Signed-off-by:
-
Geert Uytterhoeven authored
Use the existing lower_32_bits() and upper_32_bits() macros instead of explicit casts and shifts to split a 64-bit address in its two 32-bit parts. Drop the superfluous cast to "u16", as the FIELD_PREP() macro already masks it to the specified field width. Signed-off-by:
-
Geert Uytterhoeven authored
mlli_params.mlli_virt_addr is just a buffer of memory. This allows to drop a cast. No change in generated code. Signed-off-by:
-
Geert Uytterhoeven authored
Use devm_clk_get_optional() instead of devm_clk_get() and explicit optional clock handling. As clk_prepare_enable() and clk_disable_unprepare() handle optional clocks fine, the cc_clk_on() and cc_clk_off() wrappers can be removed. While at it, use the new "%pe" format specifier to print error codes. Signed-off-by:
-
Geert Uytterhoeven authored
cc_sram_mgr_fini() doesn't do anything, so it can just be removed. Signed-off-by:
-
Geert Uytterhoeven authored
When no SRAM can be allocated, cc_sram_alloc() already prints an error message. Hence there is no need to duplicate this in all callers. Signed-off-by:
-
Geert Uytterhoeven authored
Due to the way the hardware works, every double word in the SHA384 and SHA512 larval hashes must be swapped. Currently this is done at run time, during driver initialization. However, this swapping can easily be done at build time. Treating each double word as two words has the benefit of changing the larval hashes' types from u64[] to u32[], like for all other hashes, and allows dropping the casts and size doublings when calling cc_set_sram_desc(). Signed-off-by:
-
Geert Uytterhoeven authored
Unneeded casts prevent the compiler from performing valuable checks. This is especially true for function pointers. Remove these casts, to prevent silently introducing bugs when a variable's type might be changed in the future. No change in generated code. Signed-off-by:
-
Geert Uytterhoeven authored
If cc_queues_status() indicates that the queue is full, cc_send_sync_request() should loop and retry. However, cc_queues_status() returns either 0 (for success), or -ENOSPC (for queue full), while cc_send_sync_request() checks for real errors by comparing with -EAGAIN. Hence -ENOSPC is always considered a real error, and the code never retries the operation. Fix this by just removing the check, as cc_queues_status() never returns any other error value than -ENOSPC. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Geert Uytterhoeven authored
Reading the debugfs files under /sys/kernel/debug/ccree/ can be done by the user at any time. On R-Car SoCs, the CCREE device is power-managed using a moduile clock, and if this clock is not running, bogus register values may be read. Fix this by filling in the debugfs_regset32.dev field, so debugfs will make sure the device is resumed while its registers are being read. This fixes the bogus values (0x00000260) in the register dumps on R-Car H3 ES1.0: -e6601000.crypto/regs:HOST_IRR = 0x00000260 -e6601000.crypto/regs:HOST_POWER_DOWN_EN = 0x00000260 +e6601000.crypto/regs:HOST_IRR = 0x00000038 +e6601000.crypto/regs:HOST_POWER_DOWN_EN = 0x00000038 e6601000.crypto/regs:AXIM_MON_ERR = 0x00000000 e6601000.crypto/regs:DSCRPTR_QUEUE_CONTENT = 0x000002aa -e6601000.crypto/regs:HOST_IMR = 0x00000260 +e6601000.crypto/regs:HOST_IMR = 0x017ffeff e6601000.crypto/regs:AXIM_CFG = 0x001f0007 e6601000.crypto/regs:AXIM_CACHE_PARAMS = 0x00000000 -e6601000.crypto/regs:GPR_HOST = 0x00000260 +e6601000.crypto/regs:GPR_HOST = 0x017ffeff e6601000.crypto/regs:AXIM_MON_COMP = 0x00000000 -e6601000.crypto/version:SIGNATURE = 0x00000260 -e6601000.crypto/version:VERSION = 0x00000260 +e6601000.crypto/version:SIGNATURE = 0xdcc63000 +e6601000.crypto/version:VERSION = 0xaf400001 Note that this behavior is system-dependent, and the issue does not show up on all R-Car Gen3 SoCs and boards. Even when the device is suspended, the module clock may be left enabled, if configured by the firmware for Secure Mode, or when controlled by the Real-Time Core. Signed-off-by:Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by:
-
Geert Uytterhoeven authored
Hardware registers of devices under control of power management cannot be accessed at all times. If such a device is suspended, register accesses may lead to undefined behavior, like reading bogus values, or causing exceptions or system lock-ups. Extend struct debugfs_regset32 with an optional field to let device drivers specify the device the registers in the set belong to. This allows debugfs_show_regset32() to make sure the device is resumed while its registers are being read. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Zhangfei Gao authored
Register qm to uacce framework for user crypto driver Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
-
Zhangfei Gao authored
Remove the module_param uacce_mode, which is not used currently. Reviewed-by:
-
Kenneth Lee authored
Uacce (Unified/User-space-access-intended Accelerator Framework) targets to provide Shared Virtual Addressing (SVA) between accelerators and processes. So accelerator can access any data structure of the main cpu. This differs from the data sharing between cpu and io device, which share only data content rather than address. Since unified address, hardware and user space of process can share the same virtual address in the communication. Uacce create a chrdev for every registration, the queue is allocated to the process when the chrdev is opened. Then the process can access the hardware resource by interact with the queue file. By mmap the queue file space to user space, the process can directly put requests to the hardware without syscall to the kernel space. The IOMMU core only tracks mm<->device bonds at the moment, because it only needs to handle IOTLB invalidation and PASID table entries. However uacce needs a finer granularity since multiple queues from the same device can be bound to an mm. When the mm exits, all bound queues must be stopped so that the IOMMU can safely clear the PASID table entry and reallocate the PASID. An intermediate struct uacce_mm links uacce devices and queues. Note that an mm may be bound to multiple devices but an uacce_mm structure only ever belongs to a single device, because we don't need anything more complex (if multiple devices are bound to one mm, then we'll create one uacce_mm for each bond). uacce_device --+-- uacce_mm --+-- uacce_queue | '-- uacce_queue | '-- uacce_mm --+-- uacce_queue +-- uacce_queue '-- uacce_queue Reviewed-by:Kenneth Lee <liguozhu@hisilicon.com> Signed-off-by:
Zaibo Xu <xuzaibo@huawei.com> Signed-off-by:
Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by:
-
Kenneth Lee authored
Uacce (Unified/User-space-access-intended Accelerator Framework) is a kernel module targets to provide Shared Virtual Addressing (SVA) between the accelerator and process. This patch add document to explain how it works. Reviewed-by:
-
Daniel Jordan authored
According to Geert's report[0], kernel/padata.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized]: => 539:2 Warning is seen only with older compilers on certain archs. The runtime effect is potentially returning garbage down the stack when padata's cpumasks are modified before any pcrypt requests have run. Simplest fix is to initialize err to the success value. [0] http://lkml.kernel.org/r/20200210135506.11536-1-geert@linux-m68k.orgReported-by:Geert Uytterhoeven <geert@linux-m68k.org> Fixes: bbefa1dd ("crypto: pcrypt - Avoid deadlock by using per-instance padata queues") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Uwe Kleine-König authored
The imx-rngc driver binds to devices that are compatible to "fsl,imx25-rngb". Grepping through the device tree sources suggests this only exists on i.MX25. So restrict dependencies to configs that have this SoC enabled, but allow compile testing. For the latter additional dependencies for clk and readl/writel are necessary. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Stephen Kitt authored
chtls_uld_add allocates room for info->nports net_device structs following the chtls_dev struct, presumably because it was originally intended that the ports array would be stored there. This is suggested by the assignment which was present in initial versions and removed by c4e84858 ("crypto: chelsio - remove redundant assignment to cdev->ports"): cdev->ports = (struct net_device **)(cdev + 1); This assignment was never used, being overwritten by lldi->ports immediately afterwards, and I couldn't find any uses of the memory allocated past the end of the struct. Signed-off-by:
Stephen Kitt <steve@sk2.org> Signed-off-by:
-
- 13 Feb, 2020 14 commits
-
-
Eneas U de Queiroz authored
QCE hangs when presented with an AES-XTS request whose length is larger than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the fallback cipher handle them. Signed-off-by:
Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by:
-
Eneas U de Queiroz authored
Process small blocks using the fallback cipher, as a workaround for an observed failure (DMA-related, apparently) when computing the GCM ghash key. This brings a speed gain as well, since it avoids the latency of using the hardware engine to process small blocks. Using software for all 16-byte requests would be enough to make GCM work, but to increase performance, a larger threshold would be better. Measuring the performance of supported ciphers with openssl speed, software matches hardware at around 768-1024 bytes. Considering the 256-bit ciphers, software is 2-3 times faster than qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. With 128-bit keys, the break-even point would be around 1024-bytes. This adds the 'aes_sw_max_len' parameter, to set the largest request length processed by the software fallback. Its default is being set to 512 bytes, a little lower than the break-even point, to balance the cost in CPU usage. Signed-off-by:
-
Eneas U de Queiroz authored
The qce crypto driver appends an extra entry to the dst sgl, to maintain private state information. When the gcm driver sends requests to the ctr skcipher, it passes the authentication tag after the actual crypto payload, but it must not be touched. Commit 1336c2221bee ("crypto: qce - save a sg table slot for result buf") limited the destination sgl to avoid overwriting the authentication tag but it assumed the tag would be in a separate sgl entry. This is not always the case, so it is better to limit the length of the destination buffer to req->cryptlen before appending the result buf. Signed-off-by: -
Chen Zhou authored
Function dev_err() after platform_get_irq() is redundant because platform_get_irq() already prints an error. Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Devulapally Shiva Krishna authored
No logs are recorded in dmesg during chcr module load, hence adding the print and also appending -ko to driver version. Signed-off-by:
Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by:
-
Horia Geantă authored
When running tcrypt skcipher speed tests, logs contain things like: testing speed of async ecb(des3_ede) (ecb(des3_ede-generic)) encryption or: testing speed of async ecb(aes) (ecb(aes-ce)) encryption The algorithm implementations are sync, not async. Fix this inaccuracy. Fixes: 7166e589 ("crypto: tcrypt - Use skcipher") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Tianjia Zhang authored
The path with the CRYPTO_ALG_LARVAL flag has jumped to the end before Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
Ayush Sawal authored
The libkcapi test which causes kernel panic is aead asynchronous vmsplice multiple test. ./bin/kcapi -v -d 4 -x 10 -c "ccm(aes)" -q 4edb58e8d5eb6bc711c43a6f3693daebde2e5524f1b55297abb29f003236e43d -t a7877c99 -n 674742abd0f5ba -k 2861fd0253705d7875c95ba8a53171b4 -a fb7bc304a3909e66e2e0c5ef952712dd884ce3e7324171369f2c5db1adc48c7d This patch avoids dma_mapping of a zero length sg which causes the panic, by using sg_nents_for_len which maps only upto a specific length Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by:
-
Ayush Sawal authored
The libkcapi "cbc(aes)" failed tests are symmetric asynchronous cipher one shot multiple test, symmetric asynchronous cipher stream multiple test, Symmetric asynchronous cipher vmsplice multiple test In this patch a wait_for_completion is added in the chcr_aes_encrypt function, which completes when the response of comes from the hardware. This adds serialization for encryption in cbc(aes) aio case. Signed-off-by:
-
Matteo Croce authored
Add arch/arm64/crypto/poly1305-core.S to .gitignore as it's built from poly1305-core.S_shipped Fixes: f569ca16 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/ccree/cc_cipher.c: In function 'cc_setup_state_desc': drivers/crypto/ccree/cc_cipher.c:536:15: warning: variable 'du_size' set but not used [-Wunused-but-set-variable] commit 5c83e8ec ("crypto: ccree - fix FDE descriptor sequence") involved this unused variable, so remove it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Gilad Ben-Yossef authored
Remove the auth tag size from cryptlen before mapping the destination in out-of-place AEAD decryption thus resolving a crash with extended testmgr tests. Signed-off-by:
-
Valentin Ciocoi Radulescu authored
Add reference counter incremented for each frame enqueued in CAAM and replace unconditional sleep in empty_caam_fq() with polling the reference counter. When CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y boot time on LS1043A platform with this optimization decreases from ~1100s to ~11s. Signed-off-by:
Valentin Ciocoi Radulescu <valentin.ciocoi@nxp.com> Reviewed-by:
-
Gilad Ben-Yossef authored
Fix an error causing no block sizes to be reported during all AEAD registrations. Signed-off-by:
-
