- 01 Dec, 2022 13 commits
-
-
Jacob Keller authored
The ice driver supports a region for both the flat NVM contents as well as the Shadow RAM which is a layer built on top of the flash during device initialization. These regions use an almost identical read function, except that the NVM needs to set the direct flag when reading, while Shadow RAM needs to read without the direct flag set. They each call ice_read_flat_nvm with the only difference being whether to set the direct flash flag. The NVM region read function also was fixed to read the NVM in blocks to avoid a situation where the firmware reclaims the lock due to taking too long. Note that the region snapshot function takes the ops pointer so the function can easily determine which region to read. Make use of this and re-use the NVM snapshot function for both the NVM and Shadow RAM regions. This makes Shadow RAM benefit from the same block approach as the NVM region. It also reduces code in the ice driver. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jacob Keller authored
To read from a region, user space must currently request a new snapshot of the region and then read from that snapshot. This can sometimes be overkill if user space only reads a tiny portion. They first create the snapshot, then request a read, then destroy the snapshot. For regions which have a single underlying "contents", it makes sense to allow supporting direct reading of the region data. Extend the DEVLINK_CMD_REGION_READ to allow direct reading from a region if requested via the new DEVLINK_ATTR_REGION_DIRECT. If this attribute is set, then perform a direct read instead of using a snapshot. Direct read is mutually exclusive with DEVLINK_ATTR_REGION_SNAPSHOT_ID, and care is taken to ensure that we reject commands which provide incorrect attributes. Regions must enable support for direct read by implementing the .read() callback function. If a region does not support such direct reads, a suitable extended error message is reported. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Jacob Keller authored
The devlink_nl_region_read_snapshot_fill is used to copy the contents of a snapshot into a message for reporting to userspace via the DEVLINK_CMG_REGION_READ netlink message. A future change is going to add support for directly reading from a region. Almost all of the logic for this new capability is identical. To help reduce code duplication and make this logic more generic, refactor the function to take a cb and cb_priv pointer for doing the actual copy. Add a devlink_region_snapshot_fill implementation that will simply copy the relevant chunk of the region. This does require allocating some storage for the chunk as opposed to simply passing the correct address forward to the devlink_nl_cmg_region_read_chunk_fill function. A future change to implement support for directly reading from a region without a snapshot will provide a separate implementation that calls the newly added devlink region operation. Signed-off-by:
-
Jacob Keller authored
The devlink parameter of the devlink_nl_cmd_region_read_chunk_fill function is not used. Remove it, to simplify the function signature. Once removed, it is also obvious that the devlink parameter is not necessary for the devlink_nl_region_read_snapshot_fill either. Signed-off-by:
-
Jacob Keller authored
The snapshot pointer is obtained inside of the function devlink_nl_region_read_snapshot_fill. Simplify this function by locating the snapshot upfront in devlink_nl_cmd_region_read_dumpit instead. This aligns with how other netlink attributes are handled, and allows us to exit slightly earlier if an invalid snapshot ID is provided. It also allows us to pass the snapshot pointer directly to the devlink_nl_region_read_snapshot_fill, and remove the now unused attrs parameter. Signed-off-by:
-
Jacob Keller authored
Report extended error details in the devlink_nl_cmd_region_read_dumpit() function, by using the extack structure from the netlink_callback. Signed-off-by:
-
Jacob Keller authored
The calculation for the data_size in the devlink_nl_read_snapshot_fill function uses an if statement that is better expressed using the min_t macro. Signed-off-by:
-
Horatiu Vultur authored
Currently whenever a new rule id is generated, it picks up the next number bigger than previous id. So it would always be 1, 2, 3, etc. When the rule with id 1 will be deleted and a new rule will be added, it will have the id 4 and not id 1. In theory this can be a problem if at some point a rule will be added and removed ~0 times. Then no more rules can be added because there are no more ids. Change this such that when a new rule is added, search for an empty rule id starting with value of 1 as value 0 is reserved. Fixes: c9da1ac1 ("net: microchip: sparx5: Adding initial tc flower support for VCAP API") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20221128142959.8325-1-horatiu.vultur@microchip.comSigned-off-by:
-
Christophe JAILLET authored
We know that table_size = table->mem_table.depth * table->mem_table.ways, so use it instead, it is less verbose. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5230dabe27f48948a9fd0f50a62e2437b65e6a6e.1669378798.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
This allocation is really spurious. The size of the bitmap is 'tot_ids' and it is used as such in the driver. So we could expect something like: table->id_bmap = devm_kcalloc(rvu->dev, BITS_TO_LONGS(table->tot_ids), sizeof(long), GFP_KERNEL); However, when the bitmap is allocated, we allocate: BITS_TO_LONGS(table->tot_ids) * table->tot_ids ~= table->tot_ids / 32 * table->tot_ids ~= table->tot_ids^2 / 32 It is proportional to the square of 'table->tot_ids' which seems to potentially be big. Allocate the expected amount of memory, and switch to the bitmap API to have it more straightforward. Signed-off-by:
-
Christophe JAILLET authored
Use devm_bitmap_zalloc() instead of hand-writing it. This also makes the comment "Allocate bitmap for 32 entry mcam" more explicit because now 32 is really used in the allocation function, instead of an obscure 'sizeof(long)'. Signed-off-by:
-
Christophe JAILLET authored
Use kzalloc() instead of kmalloc()/memset(). Signed-off-by:
-
Christophe JAILLET authored
When this error message is displayed, we know that the all the bits in the bitmap are set. So, bitmap_weight() will return the number of bits of the bitmap, which is 'table->tot_ids'. It is unlikely that a bit will be cleared between mutex_unlock() and dev_err(), but, in order to simplify the code and avoid this possibility, just take 'table->tot_ids'. Signed-off-by:
-
- 30 Nov, 2022 15 commits
-
-
Willem de Bruijn authored
Test NIC hardware checksum offload: - Rx + Tx - IPv4 + IPv6 - TCP + UDP Optional features: - zero checksum 0xFFFF - checksum disable 0x0000 - transport encap headers - randomization See file header for detailed comments. Expected results differ depending on NIC features: - CHECKSUM_UNNECESSARY vs CHECKSUM_COMPLETE - NETIF_F_HW_CSUM (csum_start/csum_off) vs NETIF_F_IP(V6)_CSUM Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20221128140210.553391-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextJakub Kicinski authored
Steffen Klassert says: ==================== ipsec-next 2022-11-26 1) Remove redundant variable in esp6. From Colin Ian King. 2) Update x->lastused for every packet. It was used only for outgoing mobile IPv6 packets, but showed to be usefull to check if the a SA is still in use in general. From Antony Antony. 3) Remove unused variable in xfrm_byidx_resize. From Leon Romanovsky. 4) Finalize extack support for xfrm. From Sabrina Dubroca. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: add extack to xfrm_set_spdinfo xfrm: add extack to xfrm_alloc_userspi xfrm: add extack to xfrm_do_migrate xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len xfrm: add extack to xfrm_del_sa xfrm: add extack to xfrm_add_sa_expire xfrm: a few coding style clean ups xfrm: Remove not-used total variable xfrm: update x->lastused for every packet esp6: remove redundant variable err ==================== Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.comSigned-off-by:
-
Jakub Kicinski authored
Maxime Chevallier says: ==================== net: pcs: altera-tse: simplify and clean-up the driver This small series does a bit of code cleanup in the altera TSE pcs driver, removing unused register definitions, handling 1000BaseX speed configuration correctly according to the datasheet, and making use of proper poll_timeout helpers. No functional change is introduced. ==================== Link: https://lore.kernel.org/r/20221125131801.64234-1-maxime.chevallier@bootlin.comSigned-off-by:
-
Maxime Chevallier authored
remove unused register definitions, left from the split with the altera-tse mac driver. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Maxime Chevallier authored
When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode. In that mode, we don't need to set the speed since it's always 1000Mbps. Signed-off-by:
-
Maxime Chevallier authored
Software resets on the TSE PCS don't clear registers, but rather reset all internal state machines regarding AN, comma detection and encoding/decoding. Use read_poll_timeout to wait for the reset to clear instead of manually polling the register. Signed-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: MSG_FASTOPEN and TFO listener side support Before this series, only the initiator of a connection was able to combine both TCP FastOpen and MPTCP when using TCP_FASTOPEN_CONNECT socket option. These new patches here add (in theory) the full support of TFO with MPTCP, which means: - MSG_FASTOPEN sendmsg flag support (patch 1/8) - TFO support for the listener side (patches 2-5/8) - TCP_FASTOPEN socket option (patch 6/8) - TCP_FASTOPEN_KEY socket option (patch 7/8) To support TFO for the server side, a few preparation patches are needed (patches 2 to 5/8). Some of them were inspired by a previous work from Benjamin Hesmans. Note that TFO support with MPTCP has been validated with selftests (patch 8/8) but also with Packetdrill tests running with a modified but still very WIP version supporting MPTCP. Both the modified tool and the tests are available online: https://github.com/multipath-tcp/packetdrill/ ==================== Link: https://lore.kernel.org/r/20221125222958.958636-1-matthieu.baerts@tessares.netSigned-off-by:
-
Dmytro Shytyi authored
This patch first adds TFO support in mptcp_connect.c. This can be enabled via a new option: -o MPTFO. Once enabled, the TCP_FASTOPEN socket option is enabled for the server side and a sendto() with MSG_FASTOPEN is used instead of a connect() for the client side. Note that the first SYN has a limit of bytes it can carry. In other words, it is allowed to send less data than the provided one. We then need to track more status info to properly allow the next sendmsg() starting from the next part of the data to send the rest. Also in TFO scenarios, we need to completely spool the partially xmitted buffer -- and account for that -- before starting sendfile/mmap xmit, otherwise the relevant tests will fail. Co-developed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Dmytro Shytyi <dmytro@shytyi.net> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
The goal of this socket option is to set different keys per listener, see commit 1fba70e5 ("tcp: socket option to set TCP fast open key") for more details about this socket option. The only thing to do here with MPTCP is to relay the request to the first subflow like it is already done for the other TCP_FASTOPEN* socket options. Acked-by:
-
Dmytro Shytyi authored
The TCP_FASTOPEN socket option is one way for the application to tell the kernel TFO support has to be enabled for the listener socket. The only thing to do here with MPTCP is to relay the request to the first subflow like it is already done for the other TCP_FASTOPEN* socket options. Acked-by:
-
Dmytro Shytyi authored
The send_synack() needs to be overridden for MPTCP to support TFO for two reasons: - There is not be enough space in the TCP options if the TFO cookie has to be added in the SYN+ACK with other options: MSS (4), SACK OK (2), Timestamps (10), Window Scale (3+1), TFO (10+2), MP_CAPABLE (12). MPTCPv1 specs -- RFC 8684, section B.1 [1] -- suggest to drop the TCP timestamps option in this case. - The data received in the SYN has to be handled: the SKB can be dequeued from the subflow sk and transferred to the MPTCP sk. Counters need to be updated accordingly and the application can be notified at the end because some bytes have been received. [1] https://www.rfc-editor.org/rfc/rfc8684.html#section-b.1Co-developed-by:
-
Dmytro Shytyi authored
With fastopen in place, the first subflow socket is created before the MPC handshake completes, and we need to properly initialize the sequence numbers at MPC ACK reception. Co-developed-by:
-
Paolo Abeni authored
Currently the initial ack sequence is generated on demand whenever it's requested and the remote key is handy. The relevant code is scattered in different places and can lead to multiple, unneeded, crypto operations. This change consolidates the ack sequence generation code in a single helper, storing the sequence number at the subflow level. The above additionally saves a few conditional in fast-path and will simplify the upcoming fast-open implementation. Signed-off-by:
-
Paolo Abeni authored
Currently in the receive path we don't need to discriminate between MPC SYN, MPC SYN-ACK and MPC ACK, but soon the fastopen code will need that info to properly track the fully established status. Track the exact MPC suboption type into the receive opt bitmap. No functional change intended. Signed-off-by:
-
Dmytro Shytyi authored
Since commit 54f1944e ("mptcp: factor out mptcp_connect()"), all the infrastructure is now in place to support the MSG_FASTOPEN flag, we just need to call into the fastopen path in mptcp_sendmsg(). Co-developed-by:
Benjamin Hesmans <benjamin.hesmans@tessares.net> Signed-off-by:
-
- 29 Nov, 2022 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
tools/lib/bpf/ringbuf.c 927cbb47 ("libbpf: Handle size overflow for ringbuf mmap") b486d19a ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and wifi. Current release - new code bugs: - eth: mlx5e: - use kvfree() in mlx5e_accel_fs_tcp_create() - MACsec, fix RX data path 16 RX security channel limit - MACsec, fix memory leak when MACsec device is deleted - MACsec, fix update Rx secure channel active field - MACsec, fix add Rx security association (SA) rule memory leak Previous releases - regressions: - wifi: cfg80211: don't allow multi-BSSID in S1G - stmmac: set MAC's flow control register to reflect current settings - eth: mlx5: - E-switch, fix duplicate lag creation - fix use-after-free when reverting termination table Previous releases - always broken: - ipv4: fix route deletion when nexthop info is not specified - bpf: fix a local storage BPF map bug where the value's spin lock field can get initialized incorrectly - tipc: re-fetch skb cb after tipc_msg_validate - wifi: wilc1000: fix Information Element parsing - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE - sctp: fix memory leak in sctp_stream_outq_migrate() - can: can327: fix potential skb leak when netdev is down - can: add number of missing netdev freeing on error paths - aquantia: do not purge addresses when setting the number of rings - wwan: iosm: - fix incorrect skb length leading to truncated packet - fix crash in peek throughput test due to skb UAF" * tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed MAINTAINERS: Update maintainer list for chelsio drivers ionic: update MAINTAINERS entry sctp: fix memory leak in sctp_stream_outq_migrate() packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE net/mlx5: Lag, Fix for loop when checking lag Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path" net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions net: tun: Fix use-after-free in tun_detach() net: mdiobus: fix unbalanced node reference count net: hsr: Fix potential use-after-free tipc: re-fetch skb cb after tipc_msg_validate mptcp: fix sleep in atomic at close time mptcp: don't orphan ssk in mptcp_close() dsa: lan9303: Correct stat name ipv4: Fix route deletion when nexthop info is not specified net: wwan: iosm: fix incorrect skb length net: wwan: iosm: fix crash in peek throughput test net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type net: wwan: iosm: fix kernel test robot reported error ... -
Yuan Can authored
As the nla_nest_start() may fail with NULL returned, the return value should be checked. Note that this is not a real bug, nothing will break here. The next nla_put() will fail as well and we'll bail (and nla_nest_cancel() can handle NULL). But we keep getting those "fixes" so whatever. Signed-off-by:
Yuan Can <yuancan@huawei.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20221129013934.55184-1-yuancan@huawei.comSigned-off-by:
-
Yoshihiro Shimoda authored
After system resumed on some environment board, the promiscuous mode is disabled because the SoC turned off. So, call ravb_set_rx_mode() in the ravb_resume() to fix the issue. Reported-by:
Tho Vu <tho.vu.wh@renesas.com> Fixes: 0184165b ("ravb: add sleep PM suspend/resume support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Ayush Sawal authored
This updates the maintainers for chelsio inline crypto drivers and chelsio crypto drivers. Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Link: https://lore.kernel.org/r/20221128231348.8225-1-ayush.sawal@chelsio.comSigned-off-by:
-
Shannon Nelson authored
Now that Pensando is a part of AMD we need to update a couple of addresses. We're keeping the mailing list address for the moment, but that will likely change in the near future. Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Link: https://lore.kernel.org/r/20221129011734.20849-1-shannon.nelson@amd.comSigned-off-by:
-
Zhengchao Shao authored
When sctp_stream_outq_migrate() is called to release stream out resources, the memory pointed to by prio_head in stream out is not released. The memory leak information is as follows: unreferenced object 0xffff88801fe79f80 (size 64): comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s) hex dump (first 32 bytes): 80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................ 90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................ backtrace: [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60 [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770 [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0 [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30 [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0 [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0 [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120 [<ffffffff8755446a>] __sys_sendto+0x23a/0x340 [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0 [<ffffffff89978b49>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://syzkaller.appspot.com/bug?exrid=29c402e56c4760763cc0 Fixes: 637784ad ("sctp: introduce priority based stream scheduler") Reported-by: syzbot+29c402e56c4760763cc0@syzkaller.appspotmail.com Signed-off-by:Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20221126031720.378562-1-shaozhengchao@huawei.comSigned-off-by:
-
Willem de Bruijn authored
CHECKSUM_COMPLETE signals that skb->csum stores the sum over the entire packet. It does not imply that an embedded l4 checksum field has been validated. Fixes: 682f048b ("af_packet: pass checksum validation status to the user") Signed-off-by:
-
Chris Mi authored
The cited commit adds a for loop to check if each port supports lag or not. But dev is not initialized correctly. Fix it by initializing dev for each iteration. Fixes: e87c6a83 ("net/mlx5: E-switch, Fix duplicate lag creation") Signed-off-by:
Chris Mi <cmi@nvidia.com> Reported-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221129093006.378840-2-saeed@kernel.orgSigned-off-by:
-
Saeed Mahameed authored
This reverts commit c0071be0. The cited commit removed the validity checks which initialized the window_sz and never removed the use of the now uninitialized variable, so now we are left with wrong value in the window size and the following clang warning: [-Wuninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c:232:45: warning: variable 'window_sz' is uninitialized when used here MLX5_SET(macsec_aso, aso_ctx, window_size, window_sz); Revet at this time to address the clang issue due to lack of time to test the proper solution. Fixes: c0071be0 ("net/mlx5e: MACsec, remove replay window size limitation in offload path") Signed-off-by:
-
Yu Xiao authored
Add support for reporting link modes, including `Supported link modes` and `Advertised link modes`, via ethtool $DEV. A new command `SPCODE_READ_MEDIA` is added to read info from management firmware. Also, the mapping table `nfp_eth_media_table` associates the link modes between NFP and kernel. Both of them help to support this ability. Signed-off-by:
Yu Xiao <yu.xiao@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20221125113030.141642-1-simon.horman@corigine.comSigned-off-by:
-
Jiri Pirko authored
As the return value is not 0 only in case there is no such notifier block registered, add a WARN_ON_ONCE() to yell about it. Suggested-by:
Ido Schimmel <idosch@idosch.org> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20221125100255.1786741-1-jiri@resnulli.usSigned-off-by:
-
