- 10 Jun, 2020 4 commits
-
-
Daniele Palmas authored
[ Upstream commit 591612aa ] Add support for Telit LE910C1-EUX composition 0x1031: tty, tty, tty, rmnet Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 02c71b14 ] syzbot recently found a way to crash the kernel [1] Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer. L2TP uses a single list (instead of a hash table) This old bug became an issue after commit 61023658 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sk_common_release+0xba/0x370 net/core/sock.c:3210 inet_create net/ipv4/af_inet.c:390 [inline] inet_create+0x966/0xe00 net/ipv4/af_inet.c:248 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x441e29 Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29 RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 23b6578228ce553e ]--- RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Andrii Nakryiko <andriin@fb.com> Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d9a81a22 ] syzbot was able to trigger a crash after using an ISDN socket and fool l2tp. Fix this by making sure the UDP socket is of the proper family. BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018 CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4 Allocated by task 3018: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x161/0x7a0 mm/slab.c:3665 kmalloc include/linux/slab.h:560 [inline] sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612 sk_alloc+0x36/0x1100 net/core/sock.c:1666 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline] mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Freed by task 2484: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] kasan_set_free_info mm/kasan/common.c:317 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 kvfree+0x42/0x50 mm/util.c:603 __free_fdtable+0x2d/0x70 fs/file.c:31 put_files_struct fs/file.c:420 [inline] put_files_struct+0x248/0x2e0 fs/file.c:413 exit_files+0x7e/0xa0 fs/file.c:445 do_exit+0xb04/0x2dd0 kernel/exit.c:791 do_group_exit+0x125/0x340 kernel/exit.c:894 get_signal+0x47b/0x24e0 kernel/signal.c:2739 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x49/0xb3 The buggy address belongs to the object at ffff88808ed0c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1424 bytes inside of 2048-byte region [ffff88808ed0c000, ffff88808ed0c800) The buggy address belongs to the page: page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00 raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation") Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Yang Yingliang authored
[ Upstream commit 1b49cd71 ] When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed. Fixes: 20e61da7 ("ipv4: fail early when creating netdev named all or default") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 07 Jun, 2020 29 commits
-
-
Greg Kroah-Hartman authored
-
Dinghao Liu authored
[ Upstream commit 539d39ad ] Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jonathan McDowell authored
[ Upstream commit a96ac8a0 ] The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like: [ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed This patch, a slightly cleaned up version of one posted by Sergey Sergeev in: https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257 correctly enables the clock; we have already configured the source just before this. Tested on a MikroTik RB3011. Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
Valentin Longchamp authored
[ Upstream commit 79dde73c ] ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac. The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1]. A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept. The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation. [1] https://lists.openwall.net/netdev/2020/01/08/201Signed-off-by:
Valentin Longchamp <valentin@longchamp.me> Acked-by:
Matteo Ghidoni <matteo.ghidoni@ch.abb.com> Signed-off-by:
-
Chaitanya Kulkarni authored
[ Upstream commit e2748325 ] In null_init_zone_dev() check if the zone size is larger than device capacity, return error if needed. This also fixes the following oops :- null_blk: changed the number of conventional zones to 4294967295 BUG: kernel NULL pointer dereference, address: 0000000000000010 PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0 Oops: 0002 [#1] SMP NOPTI CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4 RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk] RSP: 0018:ffffc90007007e00 EFLAGS: 00010246 RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510 RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000 R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0 Call Trace: null_add_dev+0x534/0x71b [null_blk] nullb_device_power_store.cold.41+0x8/0x2e [null_blk] configfs_write_file+0xe6/0x150 vfs_write+0xba/0x1e0 ksys_write+0x5f/0xe0 do_syscall_64+0x60/0x250 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fcb51c71840 Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Gerald Schaefer authored
[ Upstream commit ac8372f3 ] On s390, the layout of normal and large ptes (i.e. pmds/puds) differs. Therefore, set_huge_pte_at() does a conversion from a normal pte to the corresponding large pmd/pud. So, when converting an empty pte, this should result in an empty pmd/pud, which would return true for pmd/pud_none(). However, after conversion we also mark the pmd/pud as large, and therefore present. For empty ptes, this will result in an empty pmd/pud that is also marked as large, and pmd/pud_none() would not return true. There is currently no issue with this behaviour, as set_huge_pte_at() does not seem to be called for empty ptes. It would be valid though, so let's fix this by not marking empty ptes as large in set_huge_pte_at(). This was found by testing a patch from from Anshuman Khandual, which is currently discussed on LKML ("mm/debug: Add more arch page table helper tests"). Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Jan Schmidt authored
[ Upstream commit 5a3f6108 ] Add a quirk for the Oculus Rift S OVR0012 display so it shows up as a non-desktop display. Signed-off-by:
Jan Schmidt <jan@centricular.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200507180628.740936-1-jan@centricular.comSigned-off-by:
-
Jeremy Kerr authored
[ Upstream commit ef01cee2 ] In bmac_get_station_address, We're reading two bytes at a time from ROM, but we do that six times, resulting in 12 bytes of read & writes. This means we will write off the end of the six-byte destination buffer. This change fixes the for-loop to only read/write six bytes. Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>. Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Reported-by:
Stan Johnson <userm57@yahoo.com> Tested-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit d7110a26 ] When building with Clang + -Wtautological-compare and CONFIG_CPUMASK_OFFSTACK unset: arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL && ^~~~~~~~~~~ ~~~~ arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) ^~~~~~~~~~~ ~~~~ 2 warnings generated. Commit f7e30f01 ("cpumask: Add helper cpumask_available()") added cpumask_available() to fix warnings of this nature. Use that here so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's value. Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://github.com/ClangBuiltLinux/linux/issues/982 Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.comSigned-off-by:
-
Atsushi Nemoto authored
[ Upstream commit 5d4c7977 ] Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by:
Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by:
Thor Thayer <thor.thayer@linux.intel.com> [wsa: updated commit message] Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Madhuparna Bhowmik authored
[ Upstream commit 770f6058 ] This patch fixes the following warning and few other instances of traversal of evm_config_xattrnames list: [ 32.848432] ============================= [ 32.848707] WARNING: suspicious RCU usage [ 32.848966] 5.7.0-rc1-00006-ga8d5875ce5f0b #1 Not tainted [ 32.849308] ----------------------------- [ 32.849567] security/integrity/evm/evm_main.c:231 RCU-list traversed in non-reader section!! Since entries are only added to the list and never deleted, use list_for_each_entry_lockless() instead of list_for_each_entry_rcu for traversing the list. Also, add a relevant comment in evm_secfs.c to indicate this fact. Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> (RCU viewpoint) Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 799587d5 ] Elide invalid configuration EZNPS + ARCv2, triggered by a make allyesconfig build. Granted the root cause is in source code (asm/barrier.h) where we check for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations at onset rather then baking subtle nuances into code. Reported-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit 43900edf ] As of today the ICCM and DCCM size checks are incorrectly using mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes. Fix that. Reported-by:
Paul Greco <pmgreco@us.ibm.com> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit b4adfe55 ] A typical backtrace acquired from ftraced function currently looks like the following (e.g. for "path_openat"): arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15a/0x3b8 ftrace_graph_caller+0x0/0x1c 0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8) do_open_execat+0x70/0x1b8 __do_execve_file.isra.0+0x7d8/0x860 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Note random "0x3e0007e3c98" stack value as ftraced function caller. This value causes either imprecise unwinder result or unwinding failure. That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which it haven't had a chance to initialize since the very first instruction calls ftrace code ("ftrace_caller"). (ftraced function might never save r14 as well). Nevertheless according to s390 ABI any function is called with stack frame allocated for it and r14 contains return address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller". So, to fix this issue simply always save traced function caller onto ftraced function stack frame. Reported-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
-
Xinwei Kong authored
[ Upstream commit bfda0445 ] Because of out-of-order execution about some CPU architecture, In this debug stage we find Completing spi interrupt enable -> prodrucing TXEI interrupt -> running "interrupt_transfer" function will prior to set "dw->rx and dws->rx_end" data, so this patch add memory barrier to enable dw->rx and dw->rx_end to be visible and solve to send SPI data error. eg: it will fix to this following low possibility error in testing environment which using SPI control to connect TPM Modules kernel: tpm tpm0: Operation Timed out kernel: tpm tpm0: tpm_relinquish_locality: : error -1 Signed-off-by:
fengsheng <fengsheng5@huawei.com> Signed-off-by:
Xinwei Kong <kong.kongxinwei@hisilicon.com> Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Anju T Sudhakar authored
[ Upstream commit 48e626ac ] export_imc_mode_and_cmd() function which creates the debugfs interface for imc-mode and imc-command, is invoked when each nest pmu units is registered. When the first nest pmu unit is registered, export_imc_mode_and_cmd() creates 'imc' directory under `/debug/powerpc/`. In the subsequent invocations debugfs_create_dir() function returns, since the directory already exists. The recent commit <c33d4423> (debugfs: make error message a bit more verbose), throws a warning if we try to invoke `debugfs_create_dir()` with an already existing directory name. Address this warning by making the debugfs directory registration in the opal_imc_counters_probe() function, i.e invoke export_imc_mode_and_cmd() function from the probe function. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Tested-by:
Nageswara R Sastry <nasastry@in.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191127072035.4283-1-anju@linux.vnet.ibm.comSigned-off-by:
-
Xiang Chen authored
[ Upstream commit 8c39673d ] Need to check the structure sas_port before using it. Link: https://lore.kernel.org/r/1573551059-107873-2-git-send-email-john.garry@huawei.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Lucas De Marchi authored
[ Upstream commit 10d987fd ] Both Ice Lake and Elkhart Lake (gen 11) support MST on all external connections except DDI A. Tiger Lake (gen 12) supports on all external connections. Move the check to happen inside intel_dp_mst_encoder_init() and add specific platform checks. v2: Replace != with == checks for ports on gen < 11 (Ville) Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-3-lucas.demarchi@intel.comSigned-off-by:
-
Dan Carpenter authored
commit 11e7a919 upstream. The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from skb->data even when skb->len is less than ETH_ZLEN so it leads to a read overflow. The fix is to pad skb->data to at least ETH_ZLEN bytes. Cc: <stable@vger.kernel.org> Reported-by:
Hu Jiahui <kirin.say@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwandaSigned-off-by:
-
DENG Qingfang authored
commit 38152ea3 upstream. Currently, setting a bridge's self PVID to other value and deleting the default VID 1 renders untagged ports of that VLAN unable to talk to the CPU port: bridge vlan add dev br0 vid 2 pvid untagged self bridge vlan del dev br0 vid 1 self bridge vlan add dev sw0p0 vid 2 pvid untagged bridge vlan del dev sw0p0 vid 1 # br0 cannot send untagged frames out of sw0p0 anymore That is because the CPU port is set to security mode and its PVID is still 1, and untagged frames are dropped due to VLAN member violation. Set the CPU port to fallback mode so untagged frames can pass through. Fixes: 83163f7d ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by:
DENG Qingfang <dqfext@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Can Guo authored
commit 17c7d35f upstream. In queuecommand path, if DMA map fails, it bails out with clock held. In this case, release the clock to keep its usage paired. [mkp: applied by hand] Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.comReviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Jérôme Pouiller authored
commit 83fc5dd5 upstream. The definitions of MMC_IOC_CMD and of MMC_IOC_MULTI_CMD rely on MMC_BLOCK_MAJOR: #define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd) #define MMC_IOC_MULTI_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_multi_cmd) However, MMC_BLOCK_MAJOR is defined in linux/major.h and linux/mmc/ioctl.h did not include it. Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200511161902.191405-1-Jerome.Pouiller@silabs.comSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Daniel Axtens authored
commit 54e200ab upstream. alloc_percpu() may return NULL, which means chan->buf may be set to NULL. In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an invalid pointer: BUG: Unable to handle kernel data access at 0x7dae0000 Faulting instruction address: 0xc0000000003f3fec ... NIP relay_open+0x29c/0x600 LR relay_open+0x270/0x600 Call Trace: relay_open+0x264/0x600 (unreliable) __blk_trace_setup+0x254/0x600 blk_trace_setup+0x68/0xa0 sg_ioctl+0x7bc/0x2e80 do_vfs_ioctl+0x13c/0x1300 ksys_ioctl+0x94/0x130 sys_ioctl+0x48/0xb0 system_call+0x5c/0x68 Check if alloc_percpu returns NULL. This was found by syzkaller both on x86 and powerpc, and the reproducer it found on powerpc is capable of hitting the issue as an unprivileged user. Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: syzbot+1e925b4b836afe85a1c6@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+587b2421926808309d21@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+58320b7171734bf79d26@syzkaller.appspotmail.com Reported-by: syzbot+d6074fb08bdb2e010520@syzkaller.appspotmail.com Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Akash Goel <akash.goel@intel.com> Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Salvatore Bonaccorso <carnil@debian.org> Cc: <stable@vger.kernel.org> [4.10+] Link: http://lkml.kernel.org/r/20191219121256.26480-1-dja@axtens.netSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Giuseppe Marco Randazzo authored
commit 63e49a9f upstream. This patch adds the AirVasT USB wireless devices 124a:4026 to the list of supported devices. It's using the ISL3886 usb firmware. Without this modification, the wiki adapter is not recognized. Cc: <stable@vger.kernel.org> Signed-off-by:
Giuseppe Marco Randazzo <gmrandazzo@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded] Signed-off-by:
-
Julian Sax authored
commit 6507ef10 upstream. This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by:
Julian Sax <jsbc@gmx.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Scott Shumate authored
commit e72455b8 upstream. Fix for non-working buttons on knock-off USB dongles for Sony controllers. These USB dongles are used to connect older Sony DA/DS1/DS2 controllers via USB and are common on Amazon, AliExpress, etc. Without the patch, the square, X, and circle buttons do not function. These dongles used to work prior to kernel 4.10 but removing the global DS3 report fixup in commit e19a267b ("HID: sony: DS3 comply to Linux gamepad spec") exposed the problem. Many people reported the problem on the Ubuntu forums and are working around the problem by falling back to the 4.9 hid-sony driver. The problem stems from these dongles incorrectly reporting their button count as 13 instead of 16. This patch fixes up the report descriptor by changing the button report count to 16 and removing 3 padding bits. Cc: stable@vger.kernel.org Fixes: e19a267b ("HID: sony: DS3 comply to Linux gamepad spec") Signed-off-by:
Scott Shumate <scott.shumate@gmail.com> Signed-off-by:
-
Fan Yang authored
commit 5bfea2d9 upstream. The original code in mm/mremap.c checks huge pmd by: if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd)) { However, a DAX mapped nvdimm is mapped as huge page (by default) but it is not transparent huge page (_PAGE_PSE | PAGE_DEVMAP). This commit changes the condition to include the case. This addresses CVE-2020-10757. Fixes: 5c7fb56e ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd") Cc: <stable@vger.kernel.org> Reported-by:
Fan Yang <Fan_Yang@sjtu.edu.cn> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 86aa6668 upstream. nd_label->dpa issue was observed when trying to enable the namespace created with little-endian kernel on a big-endian kernel. That made me run `sparse` on the rest of the code and other changes are the result of that. Fixes: d9b83c75 ("libnvdimm, btt: rework error clearing") Fixes: 9dedc73a ("libnvdimm/btt: Fix LBA masking during 'free list' population") Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190809074726.27815-1-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Tejun Heo authored
[ Upstream commit d8ef4b38 ] This reverts commit 9a9e97b2 ("cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"). The commit was added in anticipation of memcg rstat conversion which needed synchronous accounting for the event counters (e.g. oom kill count). However, the conversion didn't get merged due to percpu memory overhead concern which couldn't be addressed at the time. Unfortunately, the patch's addition of smp_mb() to cgroup_rstat_updated() meant that every scheduling event now had to go through an additional full barrier and Mel Gorman noticed it as 1% regression in netperf UDP_STREAM test. There's no need to have this barrier in tree now and even if we need synchronous accounting in the future, the right thing to do is separating that out to a separate function so that hot paths which don't care about synchronous behavior don't have to pay the overhead of the full barrier. Let's revert. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Mel Gorman <mgorman@techsingularity.net> Link: http://lkml.kernel.org/r/20200409154413.GK3818@techsingularity.net Cc: v4.18+ Signed-off-by:
-
- 03 Jun, 2020 7 commits
-
-
Greg Kroah-Hartman authored
-
Liviu Dudau authored
commit 6ade2032 upstream. find_vmap_area() can return a NULL pointer and we're going to dereference it without checking it first. Use the existing find_vm_area() function which does exactly what we want and checks for the NULL pointer. Link: http://lkml.kernel.org/r/20181228171009.22269-1-liviu@dudau.co.uk Fixes: f3c01d2f ("mm: vmalloc: avoid racy handling of debugobjects in vunmap") Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Reviewed-by:
-
Pablo Neira Ayuso authored
commit 4946ea5c upstream. >> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] extern const char *const pptp_msg_name(u_int16_t msg); ^~~~~~ Reported-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Qiushi Wu authored
commit a068aab4 upstream. kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb7183" fixed a similar problem. Fixes: 07699f9a ("bonding: add sysfs /slave dir for bond slave devices.") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Eric Dumazet authored
commit a4976a3e upstream. TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp() Fixes: 36bedb3f ("crypto: chtls - Inline TLS record Tx") Signed-off-by:
-
Qiushi Wu authored
commit 15c97385 upstream. In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by:
-
Björn Töpel authored
commit b16a87d0 upstream. The npgs member of struct xdp_umem is an u32 entity, and stores the number of pages the UMEM consumes. The calculation of npgs npgs = size / PAGE_SIZE can overflow. To avoid overflow scenarios, the division is now first stored in a u64, and the result is verified to fit into 32b. An alternative would be storing the npgs as a u64, however, this wastes memory and is an unrealisticly large packet area. Fixes: c0c77d8f ("xsk: add user memory registration support sockopt") Reported-by:
"Minh Bùi Quang" <minhquangbui99@gmail.com> Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/CACtPs=GGvV-_Yj6rbpzTVnopgi5nhMoCcTkSkYrJHGQHJWFZMQ@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20200525080400.13195-1-bjorn.topel@gmail.comSigned-off-by:
-
