into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into suse.de:/home/greg/linux/BK/pci-2.6

convert from pci_module_init to pci_register_driver
(from:http://kerneljanitors.org/TODO).
Signed-off-by: Christophe Lucas <c.lucas@ifrance.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Get rid of the potential problems with atomic operations.

According to upcoming atomic_ops.txt by David Miller and Anton Blanchard
some archs may reoder atomic operations with nonatomic, since
the former are always visible but the latter are not, this can lead
to unpredicted behaviour.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove obsoleded *sleep_on*.

Since they are used only to wait for a given flags and awakening
only happens on signals, we can just replace them with
msleep_interruptible.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Trivial cleanups, mostly static/non static, removed unneded exports.
It fuzzes a bit, sorry, patch is quite old.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Trivial cleanups, mostly static/non static, removed unneded exports.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Description: Use msleep_interruptible() instead of schedule_timeout() to
guarantee the task delays as expected. Changed tm to an int, as it now is in
terms of msecs, not jiffies.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Hi Greg,

Quoting myself:

> (...) I also think I see an indentation issue on the "tristate" line,
> seemingly copied from the SENSORS_DS1621 section which would need to
> be fixed as well.

Here is the trivial patch fixing that, if you want to apply it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Since I am working more actively than Philip (or anyone else, for that
matter) on the i2c subsystem these days, it would probably make sense
that I am listed as the co-maintainer instead of him.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Philip Edelbrock <phil@netroedge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Thanks to Jean Delvare <khali@linux-fr.org> for the help with this.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The w83627hf driver is useless unless i2c-isa is present. All other
drivers in this case do select I2C_ISA through Kconfig, so this one
should as well do.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

include/media/saa7146.h:160: parse error before `*'
include/media/saa7146.h:160: warning: function declaration isn't a prototype
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Hi Frank, all,

> > Which bus driver are you using? It obviously lacks class declaration,
> > so the correct fix is to add the class there.
>
> The modules that are loading are (in reverse order):
>      adm1031
>      ad5321
>      mic184
>      pca9540
>      i2c_sensor
>      i2c_elektor
>      i2c_algo_pcf
>      i2c_core
>
> So I believe what you are asking for is the i2c_elektor driver for the
> PCF8584 ISA to I2C chip.

Correct, I just checked and this one actually lacks its class. Patch
follows.

This patch adds a class definition to the elektor i2c bus driver.
Without this definition, hardware monitoring chips located on such
busses cannot possibly be driven.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is one in a series of patches for adding a non-blocking interface
to the I2C driver for supporting the IPMI SMBus driver.  This patch is a
simply some minor cleanups and is in addition to the patch by Mickey
Stein (http://marc.theaimsgroup.com/?l=linux-kernel&m=110919738708916&w=2).

Clean up some general I2C things.  Fix some grammar and put ()
around all the #defines that are compound to avoid nasty
side-effects.
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

None of the standard sensor drivers currently recognise the s3c24xx
I2C controller as it does not have I2C_CLASS_HWMON set in the
adapter class field.

The attached patch initialises the adapter class to I2C_CLASS_HWMON
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gcc 4.0.x cvs seems to dislike "include/linux/i2c.h file" and others due
to a current gcc 4.0.x change having to do with array declarations.

Example error msg:   include/linux/i2c.h:{55,194} error: array type has
incomplete element type

A. Daplas has recently done a workaround for this on another header
file. A thread discussing this can be found by following the link below:

http://gcc.gnu.org/ml/gcc/2005-02/msg00053.html

The patch changes the array(struct i2c_msg) declaration used by
*i2c_transfer and *master_xfer from "struct i2c_msg msg[]" format to
"struct i2c_msg *msg".

After some grepping, I came up with about a dozen files that used the
format disliked by gcc4 that're addressed by the attached patch.
Tested on gcc 3.x & gcc 4.x by configuring kernel with all i2c switches
enabled as module, and saw no errors or warnings in i2c.
Signed-off-by: Mickey Stein <yekkim@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Shouldn't the i2c list terminators be explicitely declared as unsigned?
I'd hope it to help code analysis tools and possibly avoid false
positives. Coverity's SWAT pointed my attention to these constants.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Several functions in your rtc8564 driver verify the non-NULLity of the
i2c client that is passed to them. It doesn't seem to be necessary, as I
can't think of any case where these functions could possibly be called
with a NULL i2c client. As a matter of fact, I couldn't find any similar
driver doing such checks.

My attention was brought on this by Coverity's SWAT which correctly
noticed that three of these functions contain explicit or hidden
dereferences of the i2c client pointer *before* the NULL check. I guess
it wasn't a problem because the NULL case cannot happen (unless I miss
something), but this still is confusing code.

Thus I propose the following changes:
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: David S. Miller <davem@davemloft.net>

can you please apply the attached patch (against 2.6.11-rc4, but works
as well for 2.6.11-rc3-mm2),  that adds support for the two SMBusses of
the nForce4 to the i2c-nforce2 i2c bus driver.  The patch is reported to
work on the standard nForce4 (i.e. non-Ultra, non-SLI), but I expect
that it works as well for the other nForce4 chipsets, that seem to have
the same PCI-id for the SMBus-device.

This patch was proposed by Chuck <chunkeey@web.de>, thanks to him for the
information, testing and his patch.
Signed-off-by: Hans-Frieder Vogt <hfvogt@arcor.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I was looking at your ixp4xx gpio i2c driver for inspiration (for a
similar pxa2xx one) and I just happened to notice a tiny typo.
Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 Is there any specific reason for the PIIX4 SMBus driver to be disabled on
64-bit platforms?  If not, then please apply the following change.  The
MIPS Technologies Malta development board has the 82371EB chip and
supports 64-bit configurations.  I've verified the driver to work
correctly using 64-bit kernels for both endiannesses.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Rework the pca_xfer() function to always print the number of
successfully completed transfers in a series when debugging, even when
exiting with an error.
Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Port of the Genesys Logic 520SM sensor chip driver from linux 2.4
Signed-off-by: Maarten Deprez <maartendeprez@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Marvell makes a line of host bridge for PPC and MIPS systems.  On those
bridges is an i2c controller.  This patch adds the driver for that i2c
controller.

Please apply.

Depends on patch submitted by Jean Delvare:
http://archives.andrew.net.au/lm-sensors/msg29405.htmlSigned-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Please find below the new version of the patch against kernel
2.6.11-rc3-mm1 to add the sis5595 driver (sensor part).

As you suggested, I have changed the PCI part of the driver, taking the
via686a driver as an example. I have also changed the comparison of
jiffies by using time_after.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the ST M41T00 I2C RTC chip.

This rtc chip has no mechanism to freeze it's registers while being
read; however, it will delay updating the external values of the
registers for 250ms after a register is read.  To ensure that a sane
time value is read, the driver verifies that the same registers values
were read twice before returning.

Also, when setting the rtc from an interrupt handler, a tasklet is used
to provide the context required by the i2c core code.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch makes some needlessly global code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Description: Cleanup some cluttered macros, add error checking for fan divisor value set.
Signed-off-by: Sytse Wielinga <s.b.wielinga@student.utwente.nl>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Shawn Starr <shawn.starr@rogers.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

* Jean Delvare <khali@linux-fr.org> [2005-01-25 10:14:49 +0100]:
> Any reson why asb100.c (in linux 2.6.11-rc2) includes linux/ioport.h and
> asm/io.h? As an i2c-only chip driver, I don't think it needs these.
>
> As a side note, I also wonder what the inclusions of linux/config.h,
> linux/types.h and asm/errno.h are there for.

Because they look pretty?  Here's a patch Greg, please apply...
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Looks to me like i2c-sensor-detect.c includes a handful of headers it
doesn't need at all. This patch removes them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The chips supported by the w83781d and w83627hf drivers might come up
with their temperature channels disabled. Currently, the w83781d driver
does so for temp3 but omits temp2, while the w83627hf driver omits both.
The following patch fixes that, and prints warning messages when the
driver has to enable the channels (normally the BIOS should do it for
us). We also skip this initialization step for the AS99127F chips, for
which we have no documentation.

This should hopefully solve the problem reported here:
http://archives.andrew.net.au/lm-sensors/msg29150.htmlSigned-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The following patch against kernel 2.6.11-rc2-mm1 improves the lm78
driver. I used it as a model to port the sis5595 driver to the 2.6
kernel, and I then applied the changes suggested by Jean Delvare on
the sis5595 driver to this one.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch is namespace cleanup for the i2c-dev module.  Please apply.

Signed-off-by Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Multiplied the voltage multipliers by 10 in order to comply with the sysfs
guidelines.
Signed-off-by: Stefan Ott <stefan@desire.ch>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>