Currently, veth_xmit() would call the skb_record_rx_queue() only when
there is XDP program loaded on peer interface in native mode.

If peer has XDP prog in generic mode, then netif_receive_generic_xdp()
has a call to netif_get_rxqueue(skb), so for multi-queue veth it will
not be possible to grab a correct rxq.

To fix that, store queue_mapping independently of XDP prog presence on
peer interface.

Fixes: 638264dc ("veth: Support per queue XDP ring")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Link: https://lore.kernel.org/bpf/20210303152903.11172-1-maciej.fijalkowski@intel.com

When using jumbo packets and overrunning rx queue with napi enabled,
the following sequence is observed in gfar_add_rx_frag:

   | lstatus                              |       | skb                   |
t  | lstatus,  size, flags                | first | len, data_len, *ptr   |
---+--------------------------------------+-------+-----------------------+
13 | 18002348, 9032, INTERRUPT LAST       | 0     | 9600, 8000,  f554c12e |
12 | 10000640, 1600, INTERRUPT            | 0     | 8000, 6400,  f554c12e |
11 | 10000640, 1600, INTERRUPT            | 0     | 6400, 4800,  f554c12e |
10 | 10000640, 1600, INTERRUPT            | 0     | 4800, 3200,  f554c12e |
09 | 10000640, 1600, INTERRUPT            | 0     | 3200, 1600,  f554c12e |
08 | 14000640, 1600, INTERRUPT FIRST      | 0     | 1600, 0,     f554c12e |
07 | 14000640, 1600, INTERRUPT FIRST      | 1     | 0,    0,     f554c12e |
06 | 1c000080, 128,  INTERRUPT LAST FIRST | 1     | 0,    0,     abf3bd6e |
05 | 18002348, 9032, INTERRUPT LAST       | 0     | 8000, 6400,  c5a57780 |
04 | 10000640, 1600, INTERRUPT            | 0     | 6400, 4800,  c5a57780 |
03 | 10000640, 1600, INTERRUPT            | 0     | 4800, 3200,  c5a57780 |
02 | 10000640, 1600, INTERRUPT            | 0     | 3200, 1600,  c5a57780 |
01 | 10000640, 1600, INTERRUPT            | 0     | 1600, 0,     c5a57780 |
00 | 14000640, 1600, INTERRUPT FIRST      | 1     | 0,    0,     c5a57780 |

So at t=7 a new packets is started but not finished, probably due to rx
overrun - but rx overrun is not indicated in the flags. Instead a new
packets starts at t=8. This results in skb->len to exceed size for the LAST
fragment at t=13 and thus a negative fragment size added to the skb.

This then crashes:

kernel BUG at include/linux/skbuff.h:2277!
Oops: Exception in kernel mode, sig: 5 [#1]
...
NIP [c04689f4] skb_pull+0x2c/0x48
LR [c03f62ac] gfar_clean_rx_ring+0x2e4/0x844
Call Trace:
[ec4bfd38] [c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable)
[ec4bfda8] [c03f6a44] gfar_poll_rx_sq+0x48/0xe4
[ec4bfdc8] [c048d504] __napi_poll+0x54/0x26c
[ec4bfdf8] [c048d908] net_rx_action+0x138/0x2c0
[ec4bfe68] [c06a8f34] __do_softirq+0x3a4/0x4fc
[ec4bfed8] [c0040150] run_ksoftirqd+0x58/0x70
[ec4bfee8] [c0066ecc] smpboot_thread_fn+0x184/0x1cc
[ec4bff08] [c0062718] kthread+0x140/0x144
[ec4bff38] [c0012350] ret_from_kernel_thread+0x14/0x1c

This patch fixes this by checking for computed LAST fragment size, so a
negative sized fragment is never added.
In order to prevent the newer rx frame from getting corrupted, the FIRST
flag is checked to discard the incomplete older frame.
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

RXMAC_BC_FRM_CNT_COUNT added to mp->rx_bcasts twice in a row
in niu_xmac_interrupt(). Remove the second addition.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"len > sp->mtu" checked twice in a row in sp_encaps().
Remove the second check.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The (0xBAF70000 & 0x00FFF000) << 6 should be (0xf70 << 18).

Fixes: 561535b0 ("r8169: fix OCP access on RTL8117")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix semicolon.cocci warning:
tools/testing/selftests/net/ipsec.c:1788:2-3: Unneeded semicolon
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic_remove locks multiple spinlocks while disabling interrupts:
spin_lock_irqsave(&adapter->state_lock, flags);
spin_lock_irqsave(&adapter->rwi_lock, flags);

As reported by coccinelle, the second _irqsave() overwrites the value
saved in 'flags' by the first _irqsave(),   therefore when the second
_irqrestore() comes,the value in 'flags' is not valid,the value saved
by the first _irqsave() has been lost.
This likely leads to IRQs remaining disabled. So remove the second
_irqsave():
spin_lock_irqsave(&adapter->state_lock, flags);
spin_lock(&adapter->rwi_lock);

Generated by: ./scripts/coccinelle/locks/flags.cocci
./drivers/net/ethernet/ibm/ibmvnic.c:5413:1-18:
ERROR: nested lock+irqsave that reuses flags from line 5404.

Fixes: 4a41c421 ("ibmvnic: serialize access to work queue on remove")
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to use put_unaligned when writing 32-bit DOI value
in cipso_v4_gentag_hdr to avoid unaligned memory access.

v2: unneeded type cast removed as Ondrej Mosnacek suggested.
Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Issue seen when enumerating multiple Intel mGbE interfaces in EHL.

[    6.898141] intel-eth-pci 0000:00:1d.2: enabling device (0000 -> 0002)
[    6.900971] intel-eth-pci 0000:00:1d.2: Fail to register stmmac-clk
[    6.906434] intel-eth-pci 0000:00:1d.2: User ID: 0x51, Synopsys ID: 0x52

We fix it by making the clock name to be unique following the format
of stmmac-pci_name(pci_dev) so that we can differentiate the clock for
these Intel mGbE interfaces in EHL platform as follow:

  /sys/kernel/debug/clk/stmmac-0000:00:1d.1
  /sys/kernel/debug/clk/stmmac-0000:00:1d.2
  /sys/kernel/debug/clk/stmmac-0000:00:1e.4

Fixes: 58da0cfa ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For Intel mGbE controller, MAC VLAN filter delete operation will time-out
if serdes power-down sequence happened first during driver remove() with
below message.

[82294.764958] intel-eth-pci 0000:00:1e.4 eth2: stmmac_dvr_remove: removing driver
[82294.778677] intel-eth-pci 0000:00:1e.4 eth2: Timeout accessing MAC_VLAN_Tag_Filter
[82294.779997] intel-eth-pci 0000:00:1e.4 eth2: failed to kill vid 0081/0
[82294.947053] intel-eth-pci 0000:00:1d.2 eth1: stmmac_dvr_remove: removing driver
[82295.002091] intel-eth-pci 0000:00:1d.1 eth0: stmmac_dvr_remove: removing driver

Therefore, we delay the serdes power-down to be after unregister_netdev()
which triggers the VLAN filter delete.

Fixes: b9663b7c ("net: stmmac: Enable SERDES power up/down sequence")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When iavf_process_config() fails, no error return code of
iavf_init_get_resources() is assigned.
To fix this bug, err is assigned with the return value of
iavf_process_config(), and then err is checked.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When bdx_read_mac() fails, no error return code of bdx_probe()
is assigned.
To fix this bug, err is assigned with -EFAULT as error return code.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a bug that the moderation config will not be
applied when calling mlx4_en_reset_config. For example, when
turning on rx timestamping, mlx4_en_reset_config() will be called,
causing the NIC to forget previous moderation config.

This fix is in phase with a previous fix:
commit 79c54b6b ("net/mlx4_en: Fix TX moderation info loss
after set_ringparam is called")

Tested: Before this patch, on a host with NIC using mlx4, run
netserver and stream TCP to the host at full utilization.
$ sar -I SUM 1
                 INTR    intr/s
14:03:56          sum  48758.00

After rx hwtstamp is enabled:
$ sar -I SUM 1
14:10:38          sum 317771.00
We see the moderation is not working properly and issued 7x more
interrupts.

After the patch, and turned on rx hwtstamp, the rate of interrupts
is as expected:
$ sar -I SUM 1
14:52:11          sum  49332.00

Fixes: 79c54b6b ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called")
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
CC: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2021-03-04

The following pull-request contains BPF updates for your *net* tree.

We've added 7 non-merge commits during the last 4 day(s) which contain
a total of 9 files changed, 128 insertions(+), 40 deletions(-).

The main changes are:

1) Fix 32-bit cmpxchg, from Brendan.

2) Fix atomic+fetch logic, from Ilya.

3) Fix usage of bpf_csum_diff in selftests, from Yauheni.
====================

As pointed out by Ilya and explained in the new comment, there's a
discrepancy between x86 and BPF CMPXCHG semantics: BPF always loads
the value from memory into r0, while x86 only does so when r0 and the
value in memory are different. The same issue affects s390.

At first this might sound like pure semantics, but it makes a real
difference when the comparison is 32-bit, since the load will
zero-extend r0/rax.

The fix is to explicitly zero-extend rax after doing such a
CMPXCHG. Since this problem affects multiple archs, this is done in
the verifier by patching in a BPF_ZEXT_REG instruction after every
32-bit cmpxchg. Any archs that don't need such manual zero-extension
can do a look-ahead with insn_is_zext to skip the unnecessary mov.

Note this still goes on top of Ilya's patch:

https://lore.kernel.org/bpf/20210301154019.129110-1-iii@linux.ibm.com/T/#u

Differences v5->v6[1]:
 - Moved is_cmpxchg_insn and ensured it can be safely re-used. Also renamed it
   and removed 'inline' to match the style of the is_*_function helpers.
 - Fixed up comments in verifier test (thanks for the careful review, Martin!)

Differences v4->v5[1]:
 - Moved the logic entirely into opt_subreg_zext_lo32_rnd_hi32, thanks to Martin
   for suggesting this.

Differences v3->v4[1]:
 - Moved the optimization against pointless zext into the correct place:
   opt_subreg_zext_lo32_rnd_hi32 is called _after_ fixup_bpf_calls.

Differences v2->v3[1]:
 - Moved patching into fixup_bpf_calls (patch incoming to rename this function)
 - Added extra commentary on bpf_jit_needs_zext
 - Added check to avoid adding a pointless zext(r0) if there's already one there.

Difference v1->v2[1]: Now solved centrally in the verifier instead of
  specifically for the x86 JIT. Thanks to Ilya and Daniel for the suggestions!

[1] v5: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
    v4: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
    v3: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
    v2: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
    v1: https://lore.kernel.org/bpf/d7ebaefb-bfd6-a441-3ff2-2fdfe699b1d2@iogearbox.net/T/#tReported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Fixes: 5ffa2550 ("bpf: Add instructions for atomic_[cmp]xchg")
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The current CIPSO and CALIPSO refcounting scheme for the DOI
definitions is a bit flawed in that we:

1. Don't correctly match gets/puts in netlbl_cipsov4_list().
2. Decrement the refcount on each attempt to remove the DOI from the
   DOI list, only removing it from the list once the refcount drops
   to zero.

This patch fixes these problems by adding the missing "puts" to
netlbl_cipsov4_list() and introduces a more conventional, i.e.
not-buggy, refcounting mechanism to the DOI definitions.  Upon the
addition of a DOI to the DOI list, it is initialized with a refcount
of one, removing a DOI from the list removes it from the list and
drops the refcount by one; "gets" and "puts" behave as expected with
respect to refcounts, increasing and decreasing the DOI's refcount by
one.

Fixes: b1edeb10 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
Fixes: d7cce015 ("netlabel: Add support for removing a CALIPSO DOI.")
Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The last change to ibmvnic_set_mac(), 8fc3672a, meant to prevent
users from setting an invalid MAC address on an ibmvnic interface
that has not been brought up yet. The change also prevented the
requested MAC address from being stored by the adapter object for an
ibmvnic interface when the state of the ibmvnic interface is
VNIC_PROBED - that is after probing has finished but before the
ibmvnic interface is brought up. The MAC address stored by the
adapter object is used and sent to the hypervisor for checking when
an ibmvnic interface is brought up.

The ibmvnic driver ignoring the requested MAC address when in
VNIC_PROBED state caused LACP bonds (bonds in 802.3ad mode) with more
than one slave to malfunction. The bonding code must be able to
change the MAC address of its slaves before they are brought up
during enslaving. The inability of kernels with 8fc3672a to set
the MAC addresses of bonding slaves is observable in the output of
"ip address show". The MAC addresses of the slaves are the same as
the MAC address of the bond on a working system whereas the slaves
retain their original MAC addresses on a system with a malfunctioning
LACP bond.

Fixes: 8fc3672a ("ibmvnic: fix ibmvnic_set_mac")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Init the u64 stats in order to avoid the lockdep prints on the 32bit
hardware like

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 4695 Comm: syz-executor.0 Not tainted 5.11.0-rc5-syzkaller #0
 Hardware name: ARM-Versatile Express
 Backtrace:
 [<826fc5b8>] (dump_backtrace) from [<826fc82c>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
 [<826fc814>] (show_stack) from [<8270d1f8>] (__dump_stack lib/dump_stack.c:79 [inline])
 [<826fc814>] (show_stack) from [<8270d1f8>] (dump_stack+0xa8/0xc8 lib/dump_stack.c:120)
 [<8270d150>] (dump_stack) from [<802bf9c0>] (assign_lock_key kernel/locking/lockdep.c:935 [inline])
 [<8270d150>] (dump_stack) from [<802bf9c0>] (register_lock_class+0xabc/0xb68 kernel/locking/lockdep.c:1247)
 [<802bef04>] (register_lock_class) from [<802baa2c>] (__lock_acquire+0x84/0x32d4 kernel/locking/lockdep.c:4711)
 [<802ba9a8>] (__lock_acquire) from [<802be840>] (lock_acquire.part.0+0xf0/0x554 kernel/locking/lockdep.c:5442)
 [<802be750>] (lock_acquire.part.0) from [<802bed10>] (lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5415)
 [<802beca4>] (lock_acquire) from [<81560548>] (seqcount_lockdep_reader_access include/linux/seqlock.h:103 [inline])
 [<802beca4>] (lock_acquire) from [<81560548>] (__u64_stats_fetch_begin include/linux/u64_stats_sync.h:164 [inline])
 [<802beca4>] (lock_acquire) from [<81560548>] (u64_stats_fetch_begin include/linux/u64_stats_sync.h:175 [inline])
 [<802beca4>] (lock_acquire) from [<81560548>] (nsim_get_stats64+0xdc/0xf0 drivers/net/netdevsim/netdev.c:70)
 [<8156046c>] (nsim_get_stats64) from [<81e2efa0>] (dev_get_stats+0x44/0xd0 net/core/dev.c:10405)
 [<81e2ef5c>] (dev_get_stats) from [<81e53204>] (rtnl_fill_stats+0x38/0x120 net/core/rtnetlink.c:1211)
 [<81e531cc>] (rtnl_fill_stats) from [<81e59d58>] (rtnl_fill_ifinfo+0x6d4/0x148c net/core/rtnetlink.c:1783)
 [<81e59684>] (rtnl_fill_ifinfo) from [<81e5ceb4>] (rtmsg_ifinfo_build_skb+0x9c/0x108 net/core/rtnetlink.c:3798)
 [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo_event net/core/rtnetlink.c:3830 [inline])
 [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo_event net/core/rtnetlink.c:3821 [inline])
 [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo+0x44/0x70 net/core/rtnetlink.c:3839)
 [<81e5d068>] (rtmsg_ifinfo) from [<81e45c2c>] (register_netdevice+0x664/0x68c net/core/dev.c:10103)
 [<81e455c8>] (register_netdevice) from [<815608bc>] (nsim_create+0xf8/0x124 drivers/net/netdevsim/netdev.c:317)
 [<815607c4>] (nsim_create) from [<81561184>] (__nsim_dev_port_add+0x108/0x188 drivers/net/netdevsim/dev.c:941)
 [<8156107c>] (__nsim_dev_port_add) from [<815620d8>] (nsim_dev_port_add_all drivers/net/netdevsim/dev.c:990 [inline])
 [<8156107c>] (__nsim_dev_port_add) from [<815620d8>] (nsim_dev_probe+0x5cc/0x750 drivers/net/netdevsim/dev.c:1119)
 [<81561b0c>] (nsim_dev_probe) from [<815661dc>] (nsim_bus_probe+0x10/0x14 drivers/net/netdevsim/bus.c:287)
 [<815661cc>] (nsim_bus_probe) from [<811724c0>] (really_probe+0x100/0x50c drivers/base/dd.c:554)
 [<811723c0>] (really_probe) from [<811729c4>] (driver_probe_device+0xf8/0x1c8 drivers/base/dd.c:740)
 [<811728cc>] (driver_probe_device) from [<81172fe4>] (__device_attach_driver+0x8c/0xf0 drivers/base/dd.c:846)
 [<81172f58>] (__device_attach_driver) from [<8116fee0>] (bus_for_each_drv+0x88/0xd8 drivers/base/bus.c:431)
 [<8116fe58>] (bus_for_each_drv) from [<81172c6c>] (__device_attach+0xdc/0x1d0 drivers/base/dd.c:914)
 [<81172b90>] (__device_attach) from [<8117305c>] (device_initial_probe+0x14/0x18 drivers/base/dd.c:961)
 [<81173048>] (device_initial_probe) from [<81171358>] (bus_probe_device+0x90/0x98 drivers/base/bus.c:491)
 [<811712c8>] (bus_probe_device) from [<8116e77c>] (device_add+0x320/0x824 drivers/base/core.c:3109)
 [<8116e45c>] (device_add) from [<8116ec9c>] (device_register+0x1c/0x20 drivers/base/core.c:3182)
 [<8116ec80>] (device_register) from [<81566710>] (nsim_bus_dev_new drivers/net/netdevsim/bus.c:336 [inline])
 [<8116ec80>] (device_register) from [<81566710>] (new_device_store+0x178/0x208 drivers/net/netdevsim/bus.c:215)
 [<81566598>] (new_device_store) from [<8116fcb4>] (bus_attr_store+0x2c/0x38 drivers/base/bus.c:122)
 [<8116fc88>] (bus_attr_store) from [<805b4b8c>] (sysfs_kf_write+0x48/0x54 fs/sysfs/file.c:139)
 [<805b4b44>] (sysfs_kf_write) from [<805b3c90>] (kernfs_fop_write_iter+0x128/0x1ec fs/kernfs/file.c:296)
 [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (call_write_iter include/linux/fs.h:1901 [inline])
 [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (new_sync_write fs/read_write.c:518 [inline])
 [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (vfs_write+0x3dc/0x57c fs/read_write.c:605)
 [<804d1f20>] (vfs_write) from [<804d2604>] (ksys_write+0x68/0xec fs/read_write.c:658)
 [<804d259c>] (ksys_write) from [<804d2698>] (__do_sys_write fs/read_write.c:670 [inline])
 [<804d259c>] (ksys_write) from [<804d2698>] (sys_write+0x10/0x14 fs/read_write.c:667)
 [<804d2688>] (sys_write) from [<80200060>] (ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64)

Fixes: 83c9e13a ("netdevsim: add software driver for testing offloads")
Reported-by: syzbot+e74a6857f2d0efe3ad81@syzkaller.appspotmail.com
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Fixes for v5.12

These patches from the MPTCP tree fix a few multipath TCP issues:

Patches 1 and 5 clear some stale pointers when subflows close.

Patches 2, 4, and 9 plug some memory leaks.

Patch 3 fixes a memory accounting error identified by syzkaller.

Patches 6 and 7 fix a race condition that slowed data transmission.

Patch 8 adds missing wakeups when write buffer space is freed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the port number is mismatched with the announced ones, use
'goto dispose_child' to free the resources instead of using 'goto out'.

This patch also moves the port number checking code in
subflow_syn_recv_sock before mptcp_finish_join, otherwise subflow_drop_ctx
will fail in dispose_child.

Fixes: 5bc56388 ("mptcp: add port number check for MP_JOIN")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__mptcp_clean_una() can free write memory and should wake-up
user-space processes when needed.

When such function is invoked by the MPTCP receive path, the wakeup
is not needed, as the TCP stack will later trigger subflow_write_space
which will do the wakeup as needed.

Other __mptcp_clean_una() call sites need an additional wakeup check
Let's bundle the relevant code in a new helper and use it.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/165
Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks")
Fixes: 64b9cea7 ("mptcp: fix spurious retransmissions")
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we receive a MPTCP_PUSH_PENDING even from a subflow when
mptcp_release_cb() is serving the previous one, the latter
will be delayed up to the next release_sock(msk).

Address the issue implementing a test/serve loop for such
event.

Additionally rename the push helper to __mptcp_push_pending()
to be more consistent with the existing code.

Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Will simplify the following patch, no functional change
intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just like with last_snd, we have to NULL 'first' on subflow close.

ack_hint isn't strictly required (its never dereferenced), but better to
clear this explicitly as well instead of making it an exception.

msk->first is dereferenced unconditionally at accept time, but
at that point the ssk is not on the conn_list yet -- this means
worker can't see it when iterating the conn_list.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christoph Paasch reported following crash:
dst_release underflow
WARNING: CPU: 0 PID: 1319 at net/core/dst.c:175 dst_release+0xc1/0xd0 net/core/dst.c:175
CPU: 0 PID: 1319 Comm: syz-executor217 Not tainted 5.11.0-rc6af8e85128b4d0d24083c5cac646e891227052e0c #70
Call Trace:
 rt_cache_route+0x12e/0x140 net/ipv4/route.c:1503
 rt_set_nexthop.constprop.0+0x1fc/0x590 net/ipv4/route.c:1612
 __mkroute_output net/ipv4/route.c:2484 [inline]
...

The worker leaves msk->subflow alone even when it
happened to close the subflow ssk associated with it.

Fixes: 866f26f2 ("mptcp: always graft subflow socket to parent")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/157Reported-by: Christoph Paasch <cpaasch@apple.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of memory pressure the MPTCP xmit path keeps
at most a single skb in the tx cache, eventually freeing
additional ones.

The associated counter for forward memory is not update
accordingly, and that causes the following splat:

WARNING: CPU: 0 PID: 12 at net/core/stream.c:208 sk_stream_kill_queues+0x3ca/0x530 net/core/stream.c:208
Modules linked in:
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.11.0-rc2 #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:sk_stream_kill_queues+0x3ca/0x530 net/core/stream.c:208
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e 63 01 00 00 8b ab 00 01 00 00 e9 60 ff ff ff e8 2f 24 d3 fe 0f 0b eb 97 e8 26 24 d3 fe <0f> 0b eb a0 e8 1d 24 d3 fe 0f 0b e9 a5 fe ff ff 4c 89 e7 e8 0e d0
RSP: 0018:ffffc900000c7bc8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88810030ac40 RSI: ffffffff8262ca4a RDI: 0000000000000003
RBP: 0000000000000d00 R08: 0000000000000000 R09: ffffffff85095aa7
R10: ffffffff8262c9ea R11: 0000000000000001 R12: ffff888108908100
R13: ffffffff85095aa0 R14: ffffc900000c7c48 R15: 1ffff92000018f85
FS:  0000000000000000(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa7444baef8 CR3: 0000000035ee9005 CR4: 0000000000170ef0
Call Trace:
 __mptcp_destroy_sock+0x4a7/0x6c0 net/mptcp/protocol.c:2547
 mptcp_worker+0x7dd/0x1610 net/mptcp/protocol.c:2272
 process_one_work+0x896/0x1170 kernel/workqueue.c:2275
 worker_thread+0x605/0x1350 kernel/workqueue.c:2421
 kthread+0x344/0x410 kernel/kthread.c:292
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:296

At close time, as reported by syzkaller/Christoph.

This change address the issue properly updating the fwd
allocated memory counter in the error path.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/136
Fixes: 724cfd2e ("mptcp: allocate TX skbs in msk context")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp_add_pending_subflow() performs a sock_hold() on the subflow,
then adds the subflow to the join list.

Without a sock_put the subflow sk won't be freed in case connect() fails.

unreferenced object 0xffff88810c03b100 (size 3000):
[..]
    sk_prot_alloc.isra.0+0x2f/0x110
    sk_alloc+0x5d/0xc20
    inet6_create+0x2b7/0xd30
    __sock_create+0x17f/0x410
    mptcp_subflow_create_socket+0xff/0x9c0
    __mptcp_subflow_connect+0x1da/0xaf0
    mptcp_pm_nl_work+0x6e0/0x1120
    mptcp_worker+0x508/0x9a0

Fixes: 5b950ff4 ("mptcp: link MPC subflow into msk only after accept")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Send logic caches last active subflow in the msk, so it needs to be
cleared when the cached subflow is closed.

Fixes: d5f49190 ("mptcp: allow picking different xmit subflows")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/155Reported-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a follow up of commit ea327469 ("net: sched: avoid
duplicates in qdisc dump") which has fixed the issue only for the qdisc
dump.

The duplicate printing also occurs when dumping the classes via
  tc class show dev eth0

Fixes: 59cc1f61 ("net: sched: convert qdisc linked list to hashtable")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no reason for preventing the creation and removal
of qmimux network interfaces when the underlying interface
is up.

This makes qmi_wwan mux implementation more similar to the
rmnet one, simplifying userspace management of the same
logical interfaces.

Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Reported-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the blamed patch I managed to introduce a bug while moving code
around: the same logic is applied to the ucast_egress_floods and
bcast_egress_floods variables both on the "if" and the "else" branches.

This is clearly an unintended change compared to how the code used to be
prior to that bugfix, so restore it.

Fixes: 7f7ccdea ("net: dsa: sja1105: fix leakage of flooded frames outside bridging domain")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using MLO_AN_PHY or MLO_AN_FIXED, the MII_BMCR of the SGMII PCS is
read before resetting the switch so it can be reprogrammed afterwards.
This works for the speeds of 1Gbps and 100Mbps, but not for 10Mbps,
because SPEED_10 is actually 0, so AND-ing anything with 0 is false,
therefore that last branch is dead code.

Do what others do (genphy_read_status_fixed, phy_mii_ioctl) and just
remove the check for SPEED_10, let it fall into the default case.

Fixes: ffe10e67 ("net: dsa: sja1105: Add support for the SGMII port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

An attempt is made to warn the user about the fact that VCAP IS1 cannot
offload keys matching on destination IP (at least given the current half
key format), but sadly that warning fails miserably in practice, due to
the fact that it operates on an uninitialized "match" variable. We must
first decode the keys from the flow rule.

Fixes: 75944fda ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
nexthop: Do not flush blackhole nexthops when loopback goes down

Patch #1 prevents blackhole nexthops from being flushed when the
loopback device goes down given that as far as user space is concerned,
these nexthops do not have a nexthop device.

Patch #2 adds a test case.

There are no regressions in fib_nexthops.sh with this change:

 # ./fib_nexthops.sh
 ...
 Tests passed: 165
 Tests failed:   0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Test that blackhole nexthops are not flushed when the loopback device
goes down.

Output without previous patch:

 # ./fib_nexthops.sh -t basic

 Basic functional tests
 ----------------------
 TEST: List with nothing defined                                     [ OK ]
 TEST: Nexthop get on non-existent id                                [ OK ]
 TEST: Nexthop with no device or gateway                             [ OK ]
 TEST: Nexthop with down device                                      [ OK ]
 TEST: Nexthop with device that is linkdown                          [ OK ]
 TEST: Nexthop with device only                                      [ OK ]
 TEST: Nexthop with duplicate id                                     [ OK ]
 TEST: Blackhole nexthop                                             [ OK ]
 TEST: Blackhole nexthop with other attributes                       [ OK ]
 TEST: Blackhole nexthop with loopback device down                   [FAIL]
 TEST: Create group                                                  [ OK ]
 TEST: Create group with blackhole nexthop                           [FAIL]
 TEST: Create multipath group where 1 path is a blackhole            [ OK ]
 TEST: Multipath group can not have a member replaced by blackhole   [ OK ]
 TEST: Create group with non-existent nexthop                        [ OK ]
 TEST: Create group with same nexthop multiple times                 [ OK ]
 TEST: Replace nexthop with nexthop group                            [ OK ]
 TEST: Replace nexthop group with nexthop                            [ OK ]
 TEST: Nexthop group and device                                      [ OK ]
 TEST: Test proto flush                                              [ OK ]
 TEST: Nexthop group and blackhole                                   [ OK ]

 Tests passed:  19
 Tests failed:   2

Output with previous patch:

 # ./fib_nexthops.sh -t basic

 Basic functional tests
 ----------------------
 TEST: List with nothing defined                                     [ OK ]
 TEST: Nexthop get on non-existent id                                [ OK ]
 TEST: Nexthop with no device or gateway                             [ OK ]
 TEST: Nexthop with down device                                      [ OK ]
 TEST: Nexthop with device that is linkdown                          [ OK ]
 TEST: Nexthop with device only                                      [ OK ]
 TEST: Nexthop with duplicate id                                     [ OK ]
 TEST: Blackhole nexthop                                             [ OK ]
 TEST: Blackhole nexthop with other attributes                       [ OK ]
 TEST: Blackhole nexthop with loopback device down                   [ OK ]
 TEST: Create group                                                  [ OK ]
 TEST: Create group with blackhole nexthop                           [ OK ]
 TEST: Create multipath group where 1 path is a blackhole            [ OK ]
 TEST: Multipath group can not have a member replaced by blackhole   [ OK ]
 TEST: Create group with non-existent nexthop                        [ OK ]
 TEST: Create group with same nexthop multiple times                 [ OK ]
 TEST: Replace nexthop with nexthop group                            [ OK ]
 TEST: Replace nexthop group with nexthop                            [ OK ]
 TEST: Nexthop group and device                                      [ OK ]
 TEST: Test proto flush                                              [ OK ]
 TEST: Nexthop group and blackhole                                   [ OK ]

 Tests passed:  21
 Tests failed:   0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As far as user space is concerned, blackhole nexthops do not have a
nexthop device and therefore should not be affected by the
administrative or carrier state of any netdev.

However, when the loopback netdev goes down all the blackhole nexthops
are flushed. This happens because internally the kernel associates
blackhole nexthops with the loopback netdev.

This behavior is both confusing to those not familiar with kernel
internals and also diverges from the legacy API where blackhole IPv4
routes are not flushed when the loopback netdev goes down:

 # ip route add blackhole 198.51.100.0/24
 # ip link set dev lo down
 # ip route show 198.51.100.0/24
 blackhole 198.51.100.0/24

Blackhole IPv6 routes are flushed, but at least user space knows that
they are associated with the loopback netdev:

 # ip -6 route show 2001:db8:1::/64
 blackhole 2001:db8:1::/64 dev lo metric 1024 pref medium

Fix this by only flushing blackhole nexthops when the loopback netdev is
unregistered.

Fixes: ab84be7e ("net: Initial nexthop code")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Donald Sharp <sharpd@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix typo of 'overflow' for comment in sctp_tsnmap_check().
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-03-03

This series contains updates to ixgbe and ixgbevf drivers.

Bartosz Golaszewski does not error on -ENODEV from ixgbe_mii_bus_init()
as this is valid for some devices with a shared bus for ixgbe.

Antony Antony adds a check to fail for non transport mode SA with
offload as this is not supported for ixgbe and ixgbevf.

Dinghao Liu fixes a memory leak on failure to program a perfect filter
for ixgbe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When ixgbe_fdir_write_perfect_filter_82599() fails,
input allocated by kzalloc() has not been freed,
which leads to memleak.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Based on talks and indirect references ixgbe IPsec offlod do not
support IPsec tunnel mode offload. It can only support IPsec transport
mode offload. Now explicitly fail when creating non transport mode SA
with offload to avoid false performance expectations.

Fixes: 63a67fe2 ("ixgbe: add ipsec offload add and remove SA")
Signed-off-by: Antony Antony <antony@phenome.org>
Acked-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>