- 04 Aug, 2009 40 commits
-
-
Luis R. Rodriguez authored
ath9k_hw_attach() was going first through some device id verifier, and then calling some other helper which was doing the real hardware initialization. Lets just do the devid checks within the real worker by calling a helper ath9k_hw_devid_supported(). Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
We do this in case attach and friends try to get back to ah from the softc somehow. Signed-off-by:
-
Luis R. Rodriguez authored
This lets us trim one argument off of hw initializer routines. Signed-off-by:
-
Luis R. Rodriguez authored
This lets us simplify attach code and arguments passed. Signed-off-by:
-
Luis R. Rodriguez authored
We were never propagating hw initialization errors, lets do that now and also use -EOPNOTSUPP when device revision is not supported yet. Signed-off-by:
-
Luis R. Rodriguez authored
This makes adding new hw revisions a one line change here. Signed-off-by:
-
Luis R. Rodriguez authored
We will clean this up next to just use a switch. Signed-off-by:
-
Johannes Berg authored
The SME state machine in cfg80211 uses the SSID stored in struct wireless_dev internally, but fails to clear it in multiple places (when giving up on a connection attempt and when disconnecting). This doesn't matter to the SME state machine, but does matter for IBSS. Thus, in those cases, clear the SSID to avoid messing up the IBSS state machine. Reported-by:
Joerg Albert <jal2@gmx.de> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Zhu Yi authored
UMAC only allows us to set default key for WEP and auth type is not 802.1X or RSNA. This patch fixes iwmc3200wifi for 802.1X with WEP104. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Zhu Yi authored
We should only set the static_key flag for open and legacy authentication types. It should not be set for 802.1X and TKIP. Signed-off-by:
-
Zhu Yi authored
iwm->umac_profile->sec.flags is set by iwm_set_wpa_version and checked by iwm_set_auth_type. The patch changes the order to make the flag used correctly. Signed-off-by:
-
Gábor Stefanik authored
Implement baseband init for rev.0 and rev.1 LP PHYs. Convert boardflags_hi values to defines. Implement b43_phy_copy for easier copying between registers, as needed by LP-PHY init. Signed-off-by: Gábor Stefanik<netrolller.3d@gmail.com> Cc: Michael Buesch<mb@bu3sch.de> Cc: Larry Finger<larry.finger@lwfinger.net> Signed-off-by: -
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Pavel Roskin authored
Unloading rt61pci can leave the device in such state that reloading rt61pci would fail to reinitialize it. Bogus data would be read from the EEPROM and the RF version won't be recognized. It appears that unloading rt61pci with power saving enabled would have such effect. To initialize the device properly, SOFT_RESET_CSR should be set to the same value as rt61pci_config_ps() uses to wake up the device. Signed-off-by:
-
Larry Finger authored
As shown in http://thread.gmane.org/gmane.linux.kernel.wireless.general/36497, mac80211 has a bug that allows a call to the TX routine after the queues have been stopped. This situation will only occur under extreme stress. Although b43legacy does not crash when this condition occurs, it does generate a WARN_ON and also logs a queue overrun message. This patch recognizes b43legacy is not at fault and logs a message only when the most verbose debugging mode is enabled. In the unlikely event that the queue is not stopped when the DMA queue becomes full, then a warning is issued. This patch is based on the one used by b43. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Tomas Winkler authored
Althoug GPS is a technology w/o transmitting radio and thus not a primary candidate for rfkill switch, rfkill gives unified interface point for devices with wireless technology. The input key is not supplied as it is too be deprecated. Cc: johannes@sipsolutions.net Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Maithili Hinge authored
Add code to handle IW_AUTH_PRIVACY_INVOKED and IW_AUTH_RX_UNENCRYPTED_EAPOL cases in lbs_set_auth() function in libertas code. Signed-off-by:
Maithili Hinge <maithili@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Jay Sternberg authored
version info in sysfs had been determined to be unnecessary as it is already provided in syslog info. nvm version is added to syslog version info as a debug level message to provide all info that was in the version sysfs data. Signed-off-by:
Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Remove the support for deprecated devices. These devices are engineering samples and no longer supported by the uCode. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
For 6x00 2x2 NIC, two types of Power Amplifier are available. In order for uCode to apply correct tx power, driver needs to program the CSR_GP_DRIVER_REG register and let uCode know the type of PA. If driver do not program CSR_GP_DRIVER_REG register (default to 0), then it is uCode's decision for tx power 2x2 Hybrid card: use both internal and external PA 2x2 IPA(Internal Power Amplifier) card: internal PA only Signed-off-by:
-
Daniel C Halperin authored
Resolve an issue in which out-dated fields in iwl_cmd_meta could be used for later hardware commands. Signed-off-by:
Daniel C Halperin <daniel.c.halperin@intel.com> Signed-off-by:
-
gregor kowski authored
The tkip hw support uncovered a bug in b43_write_probe_resp_template : it is writing at the wrong shm offset, it is in the B43_SHM_SH_TKIPTSCTTAK zone. This patch comments these writes. Signed-off-by:
Gregor Kowski <gregor.kowski@gmail.com> Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Michael Buesch authored
This fixes unaligned 32bit SHM-shared read/write access. The low and high 16 bits were swapped. It also adds a testcase for this to the chipaccess validation. (Thanks to Albert Herranz for tracking down this bug.) Signed-off-by:
-
Andrey Yurovsky authored
The SPI driver writes to the bus mode register and performs a sanity check by reading back what we wrote, however only the lower four bits of that register are defined. In some cases, the device side seems to set the higher bits, causing us to fail the sanity check unnecessarily. Check only the lower four bits instead. Thanks to John Goyette from Schick Technologies for pointing out the problem. Signed-off-by:
Andrey Yurovsky <andrey@cozybit.com> Signed-off-by:
-
Maxim Levitsky authored
Do a probe request every 30 seconds, and wait for probe response, half a second This should lower the traffic that card sends, thus save power Wainting longer for response makes probe more robust against 'slow' access points Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Acked-by:
-
Maxim Levitsky authored
Retry 5 times (chosen arbitary ), before assuming that station is out of range. Fixes frequent disassociations while connected to weak, and sometimes even strong access points. Signed-off-by:
-
Johannes Berg authored
The default of 500ms is pretty high, and leads to the device being awake at least 50% of the time under such light traffic conditions as a simple 1 second interval ping. Reduce to just 100ms -- it should have a similar effect while providing a better sleep time. Signed-off-by:
Kalle Valo <kalle.valo@iki.fi> Signed-off-by:
-
Luis R. Rodriguez authored
This is a private flag, internal to cfg80211. cfg80211 will set orig_* stuff internally upon wiphy registration, drivers do not need to muck with it. Signed-off-by:
-
Luis R. Rodriguez authored
Since the bss is always set now once we are connected, if the bss has its own information element we refer to it and pass that instead of relying on mac80211's parsing. Now all cfg80211 drivers get country IE support, automatically and we reduce the call overhead that we had on mac80211 which called this upon every beacon and instead now call this only upon a successfull connection by a STA on cfg80211. Acked-by:
-
Luis R. Rodriguez authored
We change regulatory code to be protected by its own regulatory mutex and alleviate cfg80211_mutex to only be used to protect cfg80211_rdev_list, the registered device list. By doing this we will be able to work on regulatory core components without having to have hog up the cfg80211_mutex. An example here is we no longer need to use the cfg80211_mutex during driver specific wiphy_apply_custom_regulatory(). We also no longer need it for the the country IE regulatory hint; by doing so we end up curing this new lockdep warning: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-rc4-wl #12 ------------------------------------------------------- phy1/1709 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<ffffffffa00af852>] regulatory_hint_11d+0x32/0x3f0 [cfg80211] but task is already holding lock: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ifmgd->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa0141bb8>] ieee80211_mgd_auth+0x108/0x1f0 [mac80211] [<ffffffffa0148563>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffa00bc3a1>] __cfg80211_mlme_auth+0x1b1/0x2a0 [cfg80211] [<ffffffffa00bc516>] cfg80211_mlme_auth+0x86/0xc0 [cfg80211] [<ffffffffa00b368d>] nl80211_authenticate+0x21d/0x230 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #2 (&wdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ab304>] cfg80211_netdev_notifier_call+0x1a4/0x390 [cfg80211] [<ffffffff814f3dff>] notifier_call_chain+0x3f/0x80 [<ffffffff81075a91>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813f665a>] dev_open+0x10a/0x120 [<ffffffff813f59bd>] dev_change_flags+0x9d/0x1e0 [<ffffffff8144eb6e>] devinet_ioctl+0x6fe/0x760 [<ffffffff81450204>] inet_ioctl+0x94/0xc0 [<ffffffff813e25fa>] sock_ioctl+0x6a/0x290 [<ffffffff8111e911>] vfs_ioctl+0x31/0xa0 [<ffffffff8111ea9a>] do_vfs_ioctl+0x8a/0x5c0 [<ffffffff8111f069>] sys_ioctl+0x99/0xa0 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #1 (&rdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ac4d0>] cfg80211_get_dev_from_ifindex+0x60/0x90 [cfg80211] [<ffffffffa00b21ff>] get_rdev_dev_by_info_ifindex+0x6f/0xa0 [cfg80211] [<ffffffffa00b51eb>] nl80211_set_interface+0x3b/0x260 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff other info that might help us debug this: 3 locks held by phy1/1709: #0: ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #1: (&ifmgd->work){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] Reported-by: -
Luis R. Rodriguez authored
Simplify the country IE hint code by just bailing out if a previous country IE has been issued. We currently just trust the first AP we connect to on any card. The idea was to perform conflict resolution within this routine but since we can no longer iterate over the registered device list here we leave conflict resolution to be dealt with at a later time on the workqueue. This code has no functional changes other than saving us an interation over the registered device list when a second card is connected, or you unplug and connect the same one, and a country IE is received. This would have been done upon every beacon received. Signed-off-by:
-
Luis R. Rodriguez authored
This has no functional changes. Acked-by:
-
Johannes Berg authored
Some of the recent MLME rework I did broke powersave because the ps_sdata isn't assigned at the right time, and the work item wasn't removed from the list before calling ieee80211_recalc_ps(). To be more specific, this broke the case where you'd enabled PS before associating, either automatically or with iwconfig. Signed-off-by:
-
Jussi Kivilinna authored
Organize key data in private structure better and store WPA keys, so they can be restored as WEP keys. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
Jussi Kivilinna authored
OID_802_11_REMOVE_KEY failed with invalid length error, add missing padding to structure fix this. Signed-off-by:
-
Jussi Kivilinna authored
Add handling for 802.11 specific rndis indications. Signed-off-by:
-
Jussi Kivilinna authored
Allow rndis_wlan to see all indications. Currently rndis_host lets rndis_wlan to know about link state changes only, but there is whole set of other 802.11-specific indications that rndis_wlan should handle properly. So rename link_change() to indication() and convert rndis_wlan to use it. Signed-off-by:
-
Jussi Kivilinna authored
Add better debugging for failed OID queries. Signed-off-by:
-
Jussi Kivilinna authored
Set current packet filter to zero to block receiving data packets from device. Signed-off-by:
-
