- 07 Dec, 2023 15 commits
-
-
Heiko Carstens authored
All addresses printed by checkstack have an extra incorrect 0 appended at the end. This was introduced with commit 677f1410 ("scripts/checkstack.pl: don't display $dre as different entity"): since then the address is taken from the line which contains the function name, instead of the line which contains stack consumption. E.g. on s390: 0000000000100a30 <do_one_initcall>: ... 100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15) So the used regex which matches spaces and hexadecimal numbers to extract an address now matches a different substring. Subsequently replacing spaces with 0 appends a zero at the and, instead of replacing leading spaces. Fix this by using the proper regex, and simplify the code a bit. Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com Fixes: 677f1410 ("scripts/checkstack.pl: don't display $dre as different entity") Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Cc: Maninder Singh <maninder1.s@samsung.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Vaneet Narang <v.narang@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Sumanth Korikkar authored
In add_memory_resource(), creation of memory block devices occurs after successful call to arch_add_memory(). However, creation of memory block devices could fail. In that case, arch_remove_memory() is called to perform necessary cleanup. Currently with or without altmap support, arch_remove_memory() is always passed with altmap set to NULL during error handling. This leads to freeing of struct pages using free_pages(), eventhough the allocation might have been performed with altmap support via altmap_alloc_block_buf(). Fix the error handling by passing altmap in arch_remove_memory(). This ensures the following: * When altmap is disabled, deallocation of the struct pages array occurs via free_pages(). * When altmap is enabled, deallocation occurs via vmem_altmap_free(). Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com Fixes: a08a2ae3 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by:
Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by:
Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by:
David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: kernel test robot <lkp@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by:
-
Sumanth Korikkar authored
From Documentation/core-api/memory-hotplug.rst: When adding/removing/onlining/offlining memory or adding/removing heterogeneous/device memory, we should always hold the mem_hotplug_lock in write mode to serialise memory hotplug (e.g. access to global/zone variables). mhp_(de)init_memmap_on_memory() functions can change zone stats and struct page content, but they are currently called w/o the mem_hotplug_lock. When memory block is being offlined and when kmemleak goes through each populated zone, the following theoretical race conditions could occur: CPU 0: | CPU 1: memory_offline() | -> offline_pages() | -> mem_hotplug_begin() | ... | -> mem_hotplug_done() | | kmemleak_scan() | -> get_online_mems() | ... -> mhp_deinit_memmap_on_memory() | [not protected by mem_hotplug_begin/done()]| Marks memory section as offline, | Retrieves zone_start_pfn poisons vmemmap struct pages and updates | and struct page members. the zone related data | | ... | -> put_online_mems() Fix this by ensuring mem_hotplug_lock is taken before performing mhp_init_memmap_on_memory(). Also ensure that mhp_deinit_memmap_on_memory() holds the lock. online/offline_pages() are currently only called from memory_block_online/offline(), so it is safe to move the locking there. Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com Fixes: a08a2ae3 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by:
-
Chester Lin authored
My company email address is going to be disabled so let's create a mapping that links to my private/community email just in case people might still try to reach me via the old one. Link: https://lkml.kernel.org/r/20231117022807.29461-1-clin@suse.comSigned-off-by:
Chester Lin <clin@suse.com> Cc: Chester Lin <chester62515@gmail.com> Cc: Bjorn Andersson <quic_bjorande@quicinc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Conor Dooley <conor.dooley@microchip.com> Cc: Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
Hugh Dickins authored
syzbot reports oops in lockdep's __lock_acquire(), called from __pte_offset_map_lock() called from filemap_map_pages(); or when I run the repro, the oops comes in pmd_install(), called from filemap_map_pmd() called from filemap_map_pages(), just before the __pte_offset_map_lock(). The problem is that filemap_map_pmd() has been assuming that when it finds pmd_none(), a page table has already been prepared in prealloc_pte; and indeed do_fault_around() has been careful to preallocate one there, when it finds pmd_none(): but what if *pmd became none in between? My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it easy for *pmd to be cleared while servicing a page fault; but even before those, a huge *pmd might be zapped while a fault is serviced. The difference in symptomatic stack traces comes from the "memory model" in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some models that is strict, and will oops on the NULL prealloc_pte; in other models, it will construct a bogus value to be populated into *pmd, then __pte_offset_map_lock() oops when trying to access split ptlock pointer (or some other symptom in normal case of ptlock embedded not pointer). Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/ Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com Fixes: f9ce0be7 ("mm: Cleanup faultaround and finish_fault() codepaths") Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/Reviewed-by:
-
Lizhi Xu authored
When the length passed in is 0, the pagemap_scan_test_walk() caller should bail. This error causes at least a WARN_ON(). Link: https://lkml.kernel.org/r/20231116031352.40853-1-lizhi.xu@windriver.com Reported-by: syzbot+32d3767580a1ea339a81@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/0000000000000526f2060a30a085@google.comSigned-off-by:
Lizhi Xu <lizhi.xu@windriver.com> Reviewed-by:
Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by:
-
Peter Xu authored
__FILE__ is not guaranteed to exist in current dir. Replace that with argv[0] for memory map test. Link: https://lkml.kernel.org/r/20231116201547.536857-4-peterx@redhat.com Fixes: 46fd75d4 ("selftests: mm: add pagemap ioctl tests") Signed-off-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
-
Peter Xu authored
The new pagemap ioctl contains a fast path for wr-protections without looking into category masks. It forgets to check PM_SCAN_WP_MATCHING before applying the wr-protections. It can cause, e.g., pte markers installed on archs that do not even support uffd wr-protect. WARNING: CPU: 0 PID: 5059 at mm/memory.c:1520 zap_pte_range mm/memory.c:1520 [inline] Link: https://lkml.kernel.org/r/20231116201547.536857-3-peterx@redhat.com Fixes: 12f6b01a ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag") Signed-off-by:
Andrei Vagin <avagin@gmail.com> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
-
Peter Xu authored
Patch series "mm/pagemap: A few fixes to the recent PAGEMAP_SCAN". This series should fix two known reports from syzbot on the new PAGEMAP_SCAN ioctl(): https://lore.kernel.org/all/000000000000b0e576060a30ee3b@google.com/ https://lore.kernel.org/all/000000000000773fa7060a31e2cc@google.com/ The 3rd patch is something I found when testing these patches. This patch (of 3): The new ioctl(PAGEMAP_SCAN) relies on vma wr-protect capability provided by userfault, however in the vma test it didn't explicitly require the vma to have wr-protect function enabled, even if PM_SCAN_WP_MATCHING flag is set. It means the pagemap code can now apply uffd-wp bit to a page in the vma even if not registered to userfaultfd at all. Then in whatever way as long as the pte got written and page fault resolved, we'll apply the write bit even if uffd-wp bit is set. We'll see a pte that has both UFFD_WP and WRITE bit set. Anything later that looks up the pte for uffd-wp bit will trigger the warning: WARNING: CPU: 1 PID: 5071 at arch/x86/include/asm/pgtable.h:403 pte_uffd_wp arch/x86/include/asm/pgtable.h:403 [inline] Fix it by doing proper check over the vma attributes when PM_SCAN_WP_MATCHING is specified. Link: https://lkml.kernel.org/r/20231116201547.536857-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20231116201547.536857-2-peterx@redhat.com Fixes: 52526ca7 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs") Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
-
Roman Gushchin authored
Erhard reported that the 6.7-rc1 kernel panics on boot if being built with clang-16. The problem was not reproducible with gcc. [ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI [ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf] [ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 #77 [ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5.977860] Call Trace: [ 5.977860] <TASK> [ 5.977860] ? __die_body+0x16/0x75 [ 5.977860] ? die_addr+0x4a/0x70 [ 5.977860] ? exc_general_protection+0x1c9/0x2d0 [ 5.977860] ? cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __x64_sys_mkdir+0x69/0x80 [ 5.977860] ? asm_exc_general_protection+0x26/0x30 [ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] obj_cgroup_charge+0x114/0x1ab [ 5.977860] pcpu_alloc+0x1a6/0xa65 [ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140 [ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140 [ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0 [ 5.977860] cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10 [ 5.977860] kernfs_iop_mkdir+0x130/0x170 [ 5.977860] vfs_mkdir+0x405/0x530 [ 5.977860] do_mkdirat+0x188/0x1f0 [ 5.977860] __x64_sys_mkdir+0x69/0x80 [ 5.977860] do_syscall_64+0x7d/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 5.977860] RIP: 0033:0x7f297671defb [ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88 [ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053 [ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb [ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0 [ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80 [ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0 [ 5.977860] </TASK> [ 5.977860] Modules linked in: [ 6.014095] ---[ end trace 0000000000000000 ]--- [ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Actually the problem is caused by uninitialized local variable in current_obj_cgroup(). If the root memory cgroup is set as an active memory cgroup for a charging scope (as in the trace, where systemd tries to create the first non-root cgroup, so the parent cgroup is the root cgroup), the "for" loop is skipped and uninitialized objcg is returned, causing a panic down the accounting stack. The fix is trivial: initialize the objcg variable to NULL unconditionally before the "for" loop. [vbabka@suse.cz: remove redundant assignment] Link: https://lkml.kernel.org/r/4bd106d5-c3e3-6731-9a74-cff81e2392de@suse.cz Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev Fixes: e86828e5 ("mm: kmem: scoped objcg protection") Signed-off-by:
Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Erhard Furtner <erhard_f@mailbox.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/1959Tested-by:
Shakeel Butt <shakeelb@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by:
-
Liu Shixin authored
set_track_prepare() will call __alloc_pages() which attempts to acquire zone->lock(spinlocks), so move it outside object->lock(raw_spinlocks) because it's not right to acquire spinlocks while holding raw_spinlocks in RT mode. Link: https://lkml.kernel.org/r/20231115082138.2649870-3-liushixin2@huawei.comSigned-off-by:
Liu Shixin <liushixin2@huawei.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Patrick Wang <patrick.wang.shcn@gmail.com> Signed-off-by:
-
Liu Shixin authored
Patch series "Fix invalid wait context of set_track_prepare()". Geert reported an invalid wait context[1] which is resulted by moving set_track_prepare() inside kmemleak_lock. This is not allowed because in RT mode, the spinlocks can be preempted but raw_spinlocks can not, so it is not allowd to acquire spinlocks while holding raw_spinlocks. The second patch fix same problem in kmemleak_update_trace(). This patch (of 2): Move the initialisation of object back to__alloc_object() because set_track_prepare() attempt to acquire zone->lock(spinlocks) while __link_object is holding kmemleak_lock(raw_spinlocks). This is not right for RT mode. This reverts commit 245245c2 ("mm/kmemleak: move the initialisation of object to __link_object"). Link: https://lkml.kernel.org/r/20231115082138.2649870-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20231115082138.2649870-2-liushixin2@huawei.com Fixes: 245245c2 ("mm/kmemleak: move the initialisation of object to __link_object") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Closes: https://lore.kernel.org/linux-mm/CAMuHMdWj0UzwNaxUvcocTfh481qRJpOWwXxsJCTJfu1oCqvgdA@mail.gmail.com/ [1] Acked-by:
-
Andrew Morton authored
We have a report of this WARN() triggering. Let's print the offending swp_entry_t to help diagnosis. Link: https://lkml.kernel.org/r/000000000000b0e576060a30ee3b@google.com Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
-
Mike Kravetz authored
The routine __vma_private_lock tests for the existence of a reserve map associated with a private hugetlb mapping. A pointer to the reserve map is in vma->vm_private_data. __vma_private_lock was checking the pointer for NULL. However, it is possible that the low bits of the pointer could be used as flags. In such instances, vm_private_data is not NULL and not a valid pointer. This results in the null-ptr-deref reported by syzbot: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88 8cf78c29e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1 0/09/2023 RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004 ... Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5753 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718 down_write+0x93/0x200 kernel/locking/rwsem.c:1573 hugetlb_vma_lock_write mm/hugetlb.c:300 [inline] hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291 __hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447 hugetlb_zap_begin include/linux/hugetlb.h:258 [inline] unmap_vmas+0x2f4/0x470 mm/memory.c:1733 exit_mmap+0x1ad/0xa60 mm/mmap.c:3230 __mmput+0x12a/0x4d0 kernel/fork.c:1349 mmput+0x62/0x70 kernel/fork.c:1371 exit_mm kernel/exit.c:567 [inline] do_exit+0x9ad/0x2a20 kernel/exit.c:861 __do_sys_exit kernel/exit.c:991 [inline] __se_sys_exit kernel/exit.c:989 [inline] __x64_sys_exit+0x42/0x50 kernel/exit.c:989 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Mask off low bit flags before checking for NULL pointer. In addition, the reserve map only 'belongs' to the OWNER (parent in parent/child relationships) so also check for the OWNER flag. Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/ Fixes: bf491692 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Rik van Riel <riel@surriel.com> Cc: Edward Adam Davis <eadavis@qq.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andrew Morton authored
Add myself as the fallthough maintainer for material under lib/. Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
- 24 Nov, 2023 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull AFS fixes from David Howells: - Fix the afs_server_list struct to be cleaned up with RCU - Fix afs to translate a no-data result from a DNS lookup into ENOENT, not EDESTADDRREQ for consistency with OpenAFS - Fix afs to translate a negative DNS lookup result into ENOENT rather than EDESTADDRREQ - Fix file locking on R/O volumes to operate in local mode as the server doesn't handle exclusive locks on such files - Set SB_RDONLY on superblocks for RO and Backup volumes so that the VFS can see that they're read only * tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY afs: Fix file locking on R/O volumes to operate in local mode afs: Return ENOENT if no cell DNS record can be found afs: Make error on cell lookup failure consistent with OpenAFS afs: Fix afs_server_list to be cleaned up with RCU
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfsLinus Torvalds authored
Pull vfs fixes from Christian Brauner: - Avoid calling back into LSMs from vfs_getattr_nosec() calls. IMA used to query inode properties accessing raw inode fields without dedicated helpers. That was finally fixed a few releases ago by forcing IMA to use vfs_getattr_nosec() helpers. The goal of the vfs_getattr_nosec() helper is to query for attributes without calling into the LSM layer which would be quite problematic because incredibly IMA is called from __fput()... __fput() -> ima_file_free() What it does is to call back into the filesystem to update the file's IMA xattr. Querying the inode without using vfs_getattr_nosec() meant that IMA didn't handle stacking filesystems such as overlayfs correctly. So the switch to vfs_getattr_nosec() is quite correct. But the switch to vfs_getattr_nosec() revealed another bug when used on stacking filesystems: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() -> security_inode_getattr() # calls back into LSMs Now, if that __fput() happens from task_work_run() of an exiting task current->fs and various other pointer could already be NULL. So anything in the LSM layer relying on that not being NULL would be quite surprised. Fix that by passing the information that this is a security request through to the stacking filesystem by adding a new internal ATT_GETATTR_NOSEC flag. Now the callchain becomes: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> if (AT_GETATTR_NOSEC) vfs_getattr_nosec() else vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() - Fix a bug introduced with the iov_iter rework from last cycle. This broke /proc/kcore by copying too much and without the correct offset. - Add a missing NULL check when allocating the root inode in autofs_fill_super(). - Fix stable writes for multi-device filesystems (xfs, btrfs etc) and the block device pseudo filesystem. Stable writes used to be a superblock flag only, making it a per filesystem property. Add an additional AS_STABLE_WRITES mapping flag to allow for fine-grained control. - Ensure that offset_iterate_dir() returns 0 after reaching the end of a directory so it adheres to getdents() convention. * tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: libfs: getdents() should return 0 after reaching EOD xfs: respect the stable writes flag on the RT device xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags block: update the stable_writes flag in bdev_add filemap: add a per-mapping stable writes flag autofs: add: new_inode check in autofs_fill_super() iov_iter: fix copy_page_to_iter_nofault() fs: Pass AT_GETATTR_NOSEC flag to getattr interface function -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Back to regular scheduled fixes pull request, mainly a bunch of msm, some i915 and otherwise a few scattered, one memory crasher in the nouveau GSP paths is helping stabilise that work. msm: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup i915: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path panel: - Fixes for innolux and auo,b101uan08.3 panel. - Fix Himax83102-j02 timings. ivpu: - Fix ivpu MMIO reset. ast: - AST fix on connetor disconnection. nouveau: - gsp memory corruption fix rockchip: - color fix" * tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm: nouveau/gsp: allocate enough space for all channel ids. drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP drm/ast: Disconnect BMC if physical connector is connected accel/ivpu/37xx: Fix hangs related to MMIO reset drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full drm/i915: do not clean GT table on error path drm/i915/dp_mst: Fix race between connector registration and setup drm/panel: simple: Fix Innolux G101ICE-L01 timings drm/panel: simple: Fix Innolux G101ICE-L01 bus flags drm/msm: remove unnecessary NULL check drm/panel: auo,b101uan08.3: Fine tune the panel power sequence drm/msm/dp: attach the DP subconnector property drm/msm/dp: don't touch DP subconnector property in eDP case drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog drm/msm: remove exra drm_kms_helper_poll_init() call drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy -
David Howells authored
Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when mounting it. Signed-off-by:David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
-
David Howells authored
AFS doesn't really do locking on R/O volumes as fileservers don't maintain state with each other and thus a lock on a R/O volume file on one fileserver will not be be visible to someone looking at the same file on another fileserver. Further, the server may return an error if you try it. Fix this by doing what other AFS clients do and handle filelocking on R/O volume files entirely within the client and don't touch the server. Fixes: 6c6c1d63 ("afs: Provide mount-time configurable byte-range file locking emulation") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
-
David Howells authored
Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or cellservdb config file record) can be found rather than returning EDESTADDRREQ. Also add cell name lookup info to the cursor dump. Fixes: d5c32c89 ("afs: Fix cell DNS lookup") Reported-by:
Markus Suvanto <markus.suvanto@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: - Add a missing error check in the adapter initialization of the pata_isapnp driver (Chen) * tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_isapnp: Add missing error check for devm_ioport_map()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "A bit bigger than usual at this time, but nothing really earth shattering: - NVMe pull request via Keith: - TCP TLS fixes (Hannes) - Authentifaction fixes (Mark, Hannes) - Properly terminate target names (Christoph) - MD pull request via Song, fixing a raid5 corruption issue - Disentanglement of the dependency mess in nvme introduced with the tls additions. Now it should actually build on all configs (Arnd) - Series of bcache fixes (Coly) - Removal of a dead helper (Damien) - s390 dasd fix (Muhammad, Jan) - lockdep blk-cgroup fixes (Ming)" * tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits) nvme: tcp: fix compile-time checks for TLS mode nvme: target: fix Kconfig select statements nvme: target: fix nvme_keyring_id() references nvme: move nvme_stop_keep_alive() back to original position nbd: pass nbd_sock to nbd_read_reply() instead of index s390/dasd: protect device queue against concurrent access s390/dasd: resolve spelling mistake block/null_blk: Fix double blk_mq_start_request() warning nvmet-tcp: always initialize tls_handshake_tmo_work nvmet: nul-terminate the NQNs passed in the connect command nvme: blank out authentication fabrics options if not configured nvme: catch errors from nvme_configure_metadata() nvme-tcp: only evaluate 'tls' option if TLS is selected nvme-auth: set explanation code for failure2 msgs nvme-auth: unlock mutex in one place only block: Remove blk_set_runtime_active() nbd: fix null-ptr-dereference while accessing 'nbd->config' nbd: factor out a helper to get nbd_config without holding 'config_lock' nbd: fold nbd config initialization into nbd_alloc_config() bcache: avoid NULL checking to c->root in run_cache_set() ... -
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A fix for ensuring that LINKAT always propagates flags correctly, and a fix for an off-by-one in segment skipping for registered buffers. Both heading to stable as well" * tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux: io_uring: fix off-by one bvec index io_uring/fs: consider link->flags when getting path for LINKAT
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - revert of commit that caused regression to many Logitech unifying receiver users (Jiri Kosina) - power management fix for hid-mcp2221 (Hamish Martin) - fix for race condition between HID core and HID debug (Charles Yi) - a couple of assorted device-ID-specific quirks * tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad HID: hid-asus: reset the backlight brightness level on resume HID: hid-asus: add const to read-only outgoing usb buffer Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration" HID: add ALWAYS_POLL quirk for Apple kb HID: glorious: fix Glorious Model I HID report HID: fix HID device resource race between HID core and debugging support HID: apple: add Jamesdonkey and A3R to non-apple keyboards list HID: mcp2221: Allow IO to start during probe HID: mcp2221: Set driver data before I2C adapter add
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2023-11-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.7-rc3: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y1eol98h.fsf@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Fixes for v6.7-rc3: - Panel fixes for innolux and auo,b101uan08.3 panel. - Fix ivpu MMIO reset. - AST fix on connetor disconnection. - nouveau gsp fix. - rockchip color fix. - Fix Himax83102-j02 timings. Signed-off-by:
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
Fixes for v6.7-rc3: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup Signed-off-by:
-
- 23 Nov, 2023 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ... -
Jakub Kicinski authored
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd16 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.orgSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2 ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.orgSigned-off-by:
-
Alex Elder authored
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678e ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.orgSigned-off-by:
-
Jann Horn authored
syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). Fixes: df720d28 ("tls/sw: Use splice_eof() to flush") Cc: stable@vger.kernel.org Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com Signed-off-by:
Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.comSigned-off-by:
-
Samuel Holland authored
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
Samuel Holland <samuel.holland@sifive.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.comSigned-off-by:
-
Arseniy Krasnov authored
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112 ("test/vsock: rework message bounds test") Signed-off-by:
Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by:
Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.comSigned-off-by:
-
Ivan Vecera authored
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc28 ("i40e: Add and delete cloud filter") Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Paolo Abeni authored
Tony Nguyen says: ==================== ice: restore timestamp config after reset Jake Keller says: We recently discovered during internal validation that the ice driver has not been properly restoring Tx timestamp configuration after a device reset, which resulted in application failures after a device reset. After some digging, it turned out this problem is two-fold. Since the introduction of the PTP support the driver has been clobbering the storage of the current timestamp configuration during reset. Thus after a reset, the driver will no longer perform Tx or Rx timestamps, and will report timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued. In addition, the recently merged auxiliary bus support code missed that PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices. Failure to restore this register configuration results in the driver no longer responding to interrupts from other ports. Depending on the traffic pattern, this can either result in increased latency responding to timestamps on the non-owner ports, or it can result in the driver never reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done during initialization. Due to this, the Tx timestamp issue persists even if userspace reconfigures timestamping. This series fixes both issues, as well as removes a redundant Tx ring field since we can rely on the skb flag as the primary detector for a Tx timestamp request. Note that I don't think this series will directly apply to older stable releases (even v6.6) as we recently refactored a lot of the PTP code to support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus implementation. The principle of patch 1/3 and 3/3 could apply as far back as the initial PTP support, but I don't think it will apply cleanly as-is. ==================== Link: https://lore.kernel.org/r/20231121211259.3348630-1-anthony.l.nguyen@intel.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jacob Keller authored
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a78115 ("ice: enable receive hardware timestamping") Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
-
Jacob Keller authored
Commit d938a8cc ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cc ("ice: Auxbus devices & driver for E822 TS") Signed-off-by:
-
Jacob Keller authored
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices") Signed-off-by:
-
