The printk() messages in this function a just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all the PRINT_INFO debug.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the commented out printk() debug.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*attach) of driver calls this function to probe the 'id' of the
hardware to verify that a valid boardinfo has been selected by the
user.

The dev_dbg() messages when the boardinfo is valid is just added
noise. The printk messages when the id does not match the boardinfo
does have some value.

Refactor the function to remove the noise and use a common message
for the "(probed, not recommended)" message.

Convert the printk() messages to dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the printk() message to dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert these printk() messages to dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the printk messages in the (*attach) of this driver. These are
just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All cases of the switch call ni_mseries_get_pll_parameters() with the same
parameters. Move the call out of the switch.

Also, move the printk from ni_mseries_get_pll_parameters() so that it can
be converted into a dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Where possible, convert the printk() messages in this file to dev_err().

Remove a couple commented out printk() messages.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Camel case changes
pDevice -> priv
pUrb -> urb
bBoolInUse -> in_use
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove Next and Ref
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Should point to vnt_tx_buffers
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Camel case change
pDevice -> priv
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Switch and case should be in same indent level
Signed-off-by: Khoa Mai <mdk194@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix C99 comment
Signed-off-by: Khoa Mai <mdk194@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the build errors in the dev_dbg() fixes in a previous patch.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
To: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devm_kasprintf() and devm_kvasprintf() are the managed counterparts
for kasprintf() and kvasprintf().
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following warnings found when running sparse:
.../lproc_echo.c:43:11: warning: Using plain integer as NULL pointer
.../lproc_echo.c:49:11: warning: Using plain integer as NULL pointer
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The controlvm channel is not removable from a guest after the guest starts,
so it makes no sense to constantly check for it. Move the channel address
discovery to visorchipset_init(), and remove all of the checks for the channel
address from the rest of the module, as the module will not load if the
channel pointer is not valid.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no reason to have controlvm_get_channel_address() defined in a
separate file. Move it to visorchipset_main.c, remove the no-op functions
controlvm_init() and controlvm_deinit() from visorchipset_main.c, and remove
the controlvm.h and controlvm_direct.c files from the module.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Dropped some "< 0" and ">= 0" checks on unsigned int values.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80501Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed dump_eth_packet() and helper functions called upon packet tx/rx.
Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 2bb9f503 ("gpu: ion: Remove heapmask from client")
removed the heap_type_mask parameter. Remove the associated
kernel-doc comment too.
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Rebecca Schultz Zavin <rebecca@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch fix - Add missing blank line after variable declaration
Signed-off-by: Kiran Padwal <kiran.padwal21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 4fb6a37c by Andrey Utkin
<andrey.krieger.utkin@gmail.com> and entitled "staging: rtl8192ee:
"Correct bitmask in comparsion" fixed what appeared to be a typo. After
consultation with the Realtek engineers, merely testing for a 2T2R device
is sufficient to ensure that the TX MCS map will equal 0x0c, thus the second
test can be ignored.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These frequencies are already defined in new tables channel.c
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All these functions are in visibility order.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All these macros relate to module parameters already removed
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All these module parameters are dead
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with vnt_tx_buffers using module_param_named and
MODULE_PARM_DESC

Check user doe not set tx_buffer beyond the define limits of driver
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with vnt_rx_buffers using module_param_named and
MODULE_PARM_DESC

Check user doe not set rx_buffer beyond the define limits of driver
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All dead code and nolonger used by driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with dev_dbg
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

replace with dev_err
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>