- 16 May, 2019 12 commits
-
-
Peter Oberparleiter authored
[ Upstream commit 2cc9637c ] The DASD driver incorrectly limits the maximum number of blocks of ECKD DASD volumes to 32 bit numbers. Volumes with a capacity greater than 2^32-1 blocks are incorrectly recognized as smaller volumes. This results in the following volume capacity limits depending on the formatted block size: BLKSIZE MAX_GB MAX_CYL 512 2047 5843492c 1024 4095 8676701 2048 8191 13634816 4096 16383 23860929 The same problem occurs when a volume with more than 17895697 cylinders is accessed in raw-track-access mode. Fix this problem by adding an explicit type cast when calculating the maximum number of blocks. Signed-off-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aditya Pakki authored
[ Upstream commit 486fa92d ] In case kmemdup fails, the fix releases resources and returns to avoid the NULL pointer dereference. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit c01908a1 ] According to HUT 1.12 usage 0xb5 from the generic desktop page is reserved for switching between external and internal display, so let's add the mapping. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 7975a1d6 ] According to HUTRR73 usages 0x79, 0x7a and 0x7c from the consumer page correspond to Brightness Up/Down/Toggle keys, so let's add the mappings. Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 96dd8687 ] According to HUTRR77 usage 0x29f from the consumer page is reserved for the Desktop application to present all running user’s application windows. Linux defines KEY_SCALE to request Compiz Scale (Expose) mode, so let's add the mapping. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 55c1fc0a ] In case kmemdup fails, the fix goes to blk_err to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit 62039b6a ] When cancel_delayed_work() returns, the delayed work may still be running. This means that the core could potentially free the private structure (struct xadc) while the delayed work is still using it. This is a potential use-after-free. Fix by calling cancel_delayed_work_sync(), which waits for any residual work to finish before returning. Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Johan Hovold authored
commit 3f5edd58 upstream. Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle(). First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU. CPU 1 CPU 2 ================ ================ complete() unthrottle() process_urb(); smp_mb__before_atomic(); set_bit(i, free); if (test_and_clear_bit(i, free)) submit_urb(); Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set. CPU 1 CPU 2 ================ ================ complete() unthrottle() set_bit(i, free); throttled = 0; smp_mb__after_atomic(); smp_mb(); if (throttled) if (test_and_clear_bit(i, free)) return; submit_urb(); Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition. Fixes: d83b4053 ("USB: serial: add support for multiple read urbs") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
commit 1cbd7a64 upstream. It seems that the default case should return AE_CTRL_TERMINATE, instead of falling through to case ACPI_RESOURCE_TYPE_END_TAG and returning AE_OK; otherwise the line of code at the end of the function is unreachable and makes no sense: return AE_CTRL_TERMINATE; This fix is based on the following thread of discussion: https://lore.kernel.org/patchwork/patch/959782/ Fixes: 33a04454 ("sony-laptop: Add SNY6001 device handling (sonypi reimplementation)") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Alexei Starovoitov authored
commit 4fe84359 upstream. when all map elements are pre-allocated one cpu can delete and reuse htab_elem while another cpu is still walking the hlist. In such case the lookup may miss the element. Convert hlist to hlist_nulls to avoid such scenario. When bucket lock is taken there is no need to take such precautions, so only convert map_lookup and map_get_next to nulls. The race window is extremely small and only reproducible with explicit udelay() inside lookup_nulls_elem_raw() Similar to hlist add hlist_nulls_for_each_entry_safe() and hlist_nulls_entry_safe() helpers. Fixes: 6c905981 ("bpf: pre-allocate hash map elements") Reported-by:
Jonathan Perry <jonperry@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Chenbo Feng <fengc@google.com> Signed-off-by:
-
Alexei Starovoitov authored
commit 9f691549 upstream. when htab_elem is removed from the bucket list the htab_elem.hash_node.next field should not be overridden too early otherwise we have a tiny race window between lookup and delete. The bug was discovered by manual code analysis and reproducible only with explicit udelay() in lookup_elem_raw(). Fixes: 6c905981 ("bpf: pre-allocate hash map elements") Reported-by:
-
Francesco Ruggeri authored
commit 8d29d16d upstream If a non zero value happens to be in xt[NFPROTO_BRIDGE].cur at init time, the following panic can be caused by running % ebtables -t broute -F BROUTING from a 32-bit user level on a 64-bit kernel. This patch replaces kmalloc_array with kcalloc when allocating xt. [ 474.680846] BUG: unable to handle kernel paging request at 0000000009600920 [ 474.687869] PGD 2037006067 P4D 2037006067 PUD 2038938067 PMD 0 [ 474.693838] Oops: 0000 [#1] SMP [ 474.697055] CPU: 9 PID: 4662 Comm: ebtables Kdump: loaded Not tainted 4.19.17-11302235.AroraKernelnext.fc18.x86_64 #1 [ 474.707721] Hardware name: Supermicro X9DRT/X9DRT, BIOS 3.0 06/28/2013 [ 474.714313] RIP: 0010:xt_compat_calc_jump+0x2f/0x63 [x_tables] [ 474.720201] Code: 40 0f b6 ff 55 31 c0 48 6b ff 70 48 03 3d dc 45 00 00 48 89 e5 8b 4f 6c 4c 8b 47 60 ff c9 39 c8 7f 2f 8d 14 08 d1 fa 48 63 fa <41> 39 34 f8 4c 8d 0c fd 00 00 00 00 73 05 8d 42 01 eb e1 76 05 8d [ 474.739023] RSP: 0018:ffffc9000943fc58 EFLAGS: 00010207 [ 474.744296] RAX: 0000000000000000 RBX: ffffc90006465000 RCX: 0000000002580249 [ 474.751485] RDX: 00000000012c0124 RSI: fffffffff7be17e9 RDI: 00000000012c0124 [ 474.758670] RBP: ffffc9000943fc58 R08: 0000000000000000 R09: ffffffff8117cf8f [ 474.765855] R10: ffffc90006477000 R11: 0000000000000000 R12: 0000000000000001 [ 474.773048] R13: 0000000000000000 R14: ffffc9000943fcb8 R15: ffffc9000943fcb8 [ 474.780234] FS: 0000000000000000(0000) GS:ffff88a03f840000(0063) knlGS:00000000f7ac7700 [ 474.788612] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 474.794632] CR2: 0000000009600920 CR3: 0000002037422006 CR4: 00000000000606e0 [ 474.802052] Call Trace: [ 474.804789] compat_do_replace+0x1fb/0x2a3 [ebtables] [ 474.810105] compat_do_ebt_set_ctl+0x69/0xe6 [ebtables] [ 474.815605] ? try_module_get+0x37/0x42 [ 474.819716] compat_nf_setsockopt+0x4f/0x6d [ 474.824172] compat_ip_setsockopt+0x7e/0x8c [ 474.828641] compat_raw_setsockopt+0x16/0x3a [ 474.833220] compat_sock_common_setsockopt+0x1d/0x24 [ 474.838458] __compat_sys_setsockopt+0x17e/0x1b1 [ 474.843343] ? __check_object_size+0x76/0x19a [ 474.847960] __ia32_compat_sys_socketcall+0x1cb/0x25b [ 474.853276] do_fast_syscall_32+0xaf/0xf6 [ 474.857548] entry_SYSENTER_compat+0x6b/0x7a Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
- 14 May, 2019 28 commits
-
-
Greg Kroah-Hartman authored
-
Andi Kleen authored
commit 1de7edbb upstream. Some of the recently added const tables use __initdata which causes section attribute conflicts. Use __initconst instead. Fixes: fa1202ef ("x86/speculation: Add command line control") Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190330004743.29541-9-andi@firstfloor.orgSigned-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Nicolas Dichtel authored
commit 25dc1d6c upstream. Even if this file was not in an uapi directory, it was exported because it was listed in the Kbuild file. Fixes: b72e7464 ("x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers") Suggested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 95310e34 upstream. Fix a minor typo in the MDS documentation: "eanbled" -> "enabled". Reported-by:
Jeff Bastian <jbastian@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Tyler Hicks authored
commit ea01668f upstream. Adjust the last two rows in the table that display possible values when MDS mitigation is enabled. They both were slightly innacurate. In addition, convert the table of possible values and their descriptions to a list-table. The simple table format uses the top border of equals signs to determine cell width which resulted in the first column being far too wide in comparison to the second column that contained the majority of the text. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
speck for Pawan Gupta authored
commit e672f8bf upstream. Updated the documentation for a new CVE-2019-11091 Microarchitectural Data Sampling Uncacheable Memory (MDSUM) which is a variant of Microarchitectural Data Sampling (MDS). MDS is a family of side channel attacks on internal buffers in Intel CPUs. MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from memory that takes a fault or assist can leave data in a microarchitectural structure that may later be observed using one of the same methods used by MSBDS, MFBDS or MLPDS. There are no new code changes expected for MDSUM. The existing mitigation for MDS applies to MDSUM as well. Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Jon Masters <jcm@redhat.com> [bwh: Backported to 4.9: adjust filename] Signed-off-by:
-
Josh Poimboeuf authored
commit 5c14068f upstream. Add MDS to the new 'mitigations=' cmdline option. Signed-off-by:
-
Josh Poimboeuf authored
commit d68be4c4 upstream. Configure x86 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v2, Speculative Store Bypass, and L1TF. The default behavior is unchanged. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/6616d0ae169308516cfdf5216bedd169f8a8291b.1555085500.git.jpoimboe@redhat.com [bwh: Backported to 4.9: adjust filenames, context] Signed-off-by:
-
Josh Poimboeuf authored
commit 98af8452 upstream. Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit e2c3c947 upstream. This code is only for CPUs which are affected by MSBDS, but are *not* affected by the other two MDS issues. For such CPUs, enabling the mds_idle_clear mitigation is enough to mitigate SMT. However if user boots with 'mds=off' and still has SMT enabled, we should not report that SMT is mitigated: $cat /sys//devices/system/cpu/vulnerabilities/mds Vulnerable; SMT mitigated But rather: Vulnerable; SMT vulnerable Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Boris Ostrovsky authored
commit cae5ec34 upstream. s/L1TF/MDS/ Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 39226ef0 upstream. MDS is vulnerable with SMT. Make that clear with a one-time printk whenever SMT first gets enabled. Signed-off-by:
-
Josh Poimboeuf authored
commit 7c3658b2 upstream. arch_smt_update() now has a dependency on both Spectre v2 and MDS mitigations. Move its initial call to after all the mitigation decisions have been made. Signed-off-by:
-
Josh Poimboeuf authored
commit d71eb0ce upstream. Add the mds=full,nosmt cmdline option. This is like mds=full, but with SMT disabled if the CPU is vulnerable. Signed-off-by:
-
Thomas Gleixner authored
commit 5999bbe7 upstream. Add the initial MDS vulnerability documentation. Signed-off-by:
-
Thomas Gleixner authored
commit 65fd4cb6 upstream. Move L!TF to a separate directory so the MDS stuff can be added at the side. Otherwise the all hardware vulnerabilites have their own top level entry. Should have done that right away. Signed-off-by:
-
Thomas Gleixner authored
commit 22dd8365 upstream. In virtualized environments it can happen that the host has the microcode update which utilizes the VERW instruction to clear CPU buffers, but the hypervisor is not yet updated to expose the X86_FEATURE_MD_CLEAR CPUID bit to guests. Introduce an internal mitigation mode VMWERV which enables the invocation of the CPU buffer clearing even if X86_FEATURE_MD_CLEAR is not set. If the system has no updated microcode this results in a pointless execution of the VERW instruction wasting a few CPU cycles. If the microcode is updated, but not exposed to a guest then the CPU buffers will be cleared. That said: Virtual Machines Will Eventually Receive Vaccine Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Thomas Gleixner authored
commit 8a4b06d3 upstream. Add the sysfs reporting file for MDS. It exposes the vulnerability and mitigation state similar to the existing files for the other speculative hardware vulnerabilities. Signed-off-by:
-
Thomas Gleixner authored
commit bc124170 upstream. Now that the mitigations are in place, add a command line parameter to control the mitigation, a mitigation selector function and a SMT update mechanism. This is the minimal straight forward initial implementation which just provides an always on/off mode. The command line parameter is: mds=[full|off] This is consistent with the existing mitigations for other speculative hardware vulnerabilities. The idle invocation is dynamically updated according to the SMT state of the system similar to the dynamic update of the STIBP mitigation. The idle mitigation is limited to CPUs which are only affected by MSBDS and not any other variant, because the other variants cannot be mitigated on SMT enabled systems. Signed-off-by:
-
Thomas Gleixner authored
commit 07f07f55 upstream. Add a static key which controls the invocation of the CPU buffer clear mechanism on idle entry. This is independent of other MDS mitigations because the idle entry invocation to mitigate the potential leakage due to store buffer repartitioning is only necessary on SMT systems. Add the actual invocations to the different halt/mwait variants which covers all usage sites. mwaitx is not patched as it's not available on Intel CPUs. The buffer clear is only invoked before entering the C-State to prevent that stale data from the idling CPU is spilled to the Hyper-Thread sibling after the Store buffer got repartitioned and all entries are available to the non idle sibling. When coming out of idle the store buffer is partitioned again so each sibling has half of it available. Now CPU which returned from idle could be speculatively exposed to contents of the sibling, but the buffers are flushed either on exit to user space or on VMENTER. When later on conditional buffer clearing is implemented on top of this, then there is no action required either because before returning to user space the context switch will set the condition flag which causes a flush on the return to user path. Note, that the buffer clearing on idle is only sensible on CPUs which are solely affected by MSBDS and not any other variant of MDS because the other MDS variants cannot be mitigated when SMT is enabled, so the buffer clearing on idle would be a window dressing exercise. This intentionally does not handle the case in the acpi/processor_idle driver which uses the legacy IO port interface for C-State transitions for two reasons: - The acpi/processor_idle driver was replaced by the intel_idle driver almost a decade ago. Anything Nehalem upwards supports it and defaults to that new driver. - The legacy IO port interface is likely to be used on older and therefore unaffected CPUs or on systems which do not receive microcode updates anymore, so there is no point in adding that. Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Reviewed-by:
-
Thomas Gleixner authored
commit 650b68a0 upstream. CPUs which are affected by L1TF and MDS mitigate MDS with the L1D Flush on VMENTER when updated microcode is installed. If a CPU is not affected by L1TF or if the L1D Flush is not in use, then MDS mitigation needs to be invoked explicitly. For these cases, follow the host mitigation state and invoke the MDS mitigation before VMENTER. Signed-off-by:
-
Thomas Gleixner authored
commit 04dcbdb8 upstream. Add a static key which controls the invocation of the CPU buffer clear mechanism on exit to user space and add the call into prepare_exit_to_usermode() and do_nmi() right before actually returning. Add documentation which kernel to user space transition this covers and explain why some corner cases are not mitigated. Signed-off-by:
-
Thomas Gleixner authored
commit 6a9e5292 upstream. The Microarchitectural Data Sampling (MDS) vulernabilities are mitigated by clearing the affected CPU buffers. The mechanism for clearing the buffers uses the unused and obsolete VERW instruction in combination with a microcode update which triggers a CPU buffer clear when VERW is executed. Provide a inline function with the assembly magic. The argument of the VERW instruction must be a memory operand as documented: "MD_CLEAR enumerates that the memory-operand variant of VERW (for example, VERW m16) has been extended to also overwrite buffers affected by MDS. This buffer overwriting functionality is not guaranteed for the register operand variant of VERW." Documentation also recommends to use a writable data segment selector: "The buffer overwriting occurs regardless of the result of the VERW permission check, as well as when the selector is null or causes a descriptor load segment violation. However, for lowest latency we recommend using a selector that indicates a valid writable data segment." Add x86 specific documentation about MDS and the internal workings of the mitigation. Signed-off-by:
-
Andi Kleen authored
commit 6c4dbbd1 upstream. X86_FEATURE_MD_CLEAR is a new CPUID bit which is set when microcode provides the mechanism to invoke a flush of various exploitable CPU buffers by invoking the VERW instruction. Hand it through to guests so they can adjust their mitigations. This also requires corresponding qemu changes, which are available separately. [ tglx: Massaged changelog ] Signed-off-by:
-
Thomas Gleixner authored
commit e261f209 upstream. This bug bit is set on CPUs which are only affected by Microarchitectural Store Buffer Data Sampling (MSBDS) and not by any other MDS variant. This is important because the Store Buffers are partitioned between Hyper-Threads so cross thread forwarding is not possible. But if a thread enters or exits a sleep state the store buffer is repartitioned which can expose data from one thread to the other. This transition can be mitigated. That means that for CPUs which are only affected by MSBDS SMT can be enabled, if the CPU is not affected by other SMT sensitive vulnerabilities, e.g. L1TF. The XEON PHI variants fall into that category. Also the Silvermont/Airmont ATOMs, but for them it's not really relevant as they do not support SMT, but mark them for completeness sake. Signed-off-by:
-
Andi Kleen authored
commit ed5194c2 upstream. Microarchitectural Data Sampling (MDS), is a class of side channel attacks on internal buffers in Intel CPUs. The variants are: - Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126) - Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130) - Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127) MSBDS leaks Store Buffer Entries which can be speculatively forwarded to a dependent load (store-to-load forwarding) as an optimization. The forward can also happen to a faulting or assisting load operation for a different memory address, which can be exploited under certain conditions. Store buffers are partitioned between Hyper-Threads so cross thread forwarding is not possible. But if a thread enters or exits a sleep state the store buffer is repartitioned which can expose data from one thread to the other. MFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage L1 miss situations and to hold data which is returned or sent in response to a memory or I/O operation. Fill buffers can forward data to a load operation and also write data to the cache. When the fill buffer is deallocated it can retain the stale data of the preceding operations which can then be forwarded to a faulting or assisting load operation, which can be exploited under certain conditions. Fill buffers are shared between Hyper-Threads so cross thread leakage is possible. MLDPS leaks Load Port Data. Load ports are used to perform load operations from memory or I/O. The received data is then forwarded to the register file or a subsequent operation. In some implementations the Load Port can contain stale data from a previous operation which can be forwarded to faulting or assisting loads under certain conditions, which again can be exploited eventually. Load ports are shared between Hyper-Threads so cross thread leakage is possible. All variants have the same mitigation for single CPU thread case (SMT off), so the kernel can treat them as one MDS issue. Add the basic infrastructure to detect if the current CPU is affected by MDS. [ tglx: Rewrote changelog ] Signed-off-by:
-
Thomas Gleixner authored
commit 36ad3513 upstream. The CPU vulnerability whitelists have some overlap and there are more whitelists coming along. Use the driver_data field in the x86_cpu_id struct to denote the whitelisted vulnerabilities and combine all whitelists into one. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit d8eabc37 upstream. Greg pointed out that speculation related bit defines are using (1 << N) format instead of BIT(N). Aside of that (1 << N) is wrong as it should use 1UL at least. Clean it up. [ Josh Poimboeuf: Fix tools build ] Reported-by:
-
