MTL currently uses gen8_ppgtt_insert_huge when managing huge pages.
This is because MTL reports as not supporting 64K pages, or more
accurately, the system that reports whether a platform has 64K pages
reports false for MTL.  This is only half correct, as the 64K page support
reporting system only cares about 64K page support for LMEM, which MTL
doesn't have.

MTL should be using xehpsdv_ppgtt_insert_huge.  However, simply changing
over to using that manager doesn't resolve the issue because MTL is
expecting the virtual address space for the page table to be flushed after
initialization, so we must also add a flush statement there.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425-hugepage-migrate-v8-2-7868d54eaa27@intel.com

Convert the igt_mock_ppgtt_huge_fill and igt_mock_ppgtt_64K mock selftests
into live selftests as their requirements have recently become
platform-dependent. Additionally, apply necessary platform dependency
checks to these tests.

v8:
- handle properly 64K and 2M pages
v9:
- do not expect 64K pages if 2M are present
- fix hex printing
- obey commit message line limit
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Co-developed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425-hugepage-migrate-v8-1-7868d54eaa27@intel.com

Enable strict RAR to prevent spurious GPU hangs.

v1.1: Rebase
Bspec: 51762
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425183011.865085-1-radhakrishna.sripada@intel.com

Instead of erroring out when GuC reset is in progress, block waiting for
GuC reset to complete which is a more reasonable uapi behavior.

v2: Avoid race between wake_up_all and waiting for wakeup (Rodrigo)
v3: Remove timeout when blocked (Tvrtko)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420164041.1428455-4-ashutosh.dixit@intel.com

On dGfx, the PL1 power limit being enabled and set to a low value results
in a low GPU operating freq. It also negates the freq raise operation which
is done before GuC firmware load. As a result GuC firmware load can time
out. Such timeouts were seen in the GL #8062 bug below (where the PL1 power
limit was enabled and set to a low value). Therefore disable the PL1 power
limit when allowed by HW when loading GuC firmware.

v2:
 - Take mutex (to disallow writes to power1_max) across GuC reset/fw load
 - Add hwm_power_max_restore to error return code path

v3 (Jani N):
 - Add/remove explanatory comments
 - Function renames
 - Type corrections
 - Locking annotation

v4:
 - Don't hold the lock across GuC reset (Rodrigo)
 - New locking scheme (suggested by Rodrigo)
 - Eliminate rpm_get in power_max_disable/restore, not needed (Tvrtko)

v5:
 - Fix uninitialized pl1en variable compile warning reported by kernel
   build robot by creating new err_rps label

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420164041.1428455-3-ashutosh.dixit@intel.com

In preparation for follow-on patches, refactor hwm_power_max_write to take
hwmon_lock and runtime pm wakeref at start of the function and release them
at the end, therefore acquiring these just once each.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420164041.1428455-2-ashutosh.dixit@intel.com

Dan Carpenter pointed out that 'err' was not being set in the case
where the GuC firmware version range check fails. Fix that.

Note that while this is a bug fix for a previous patch (see Fixes tag
below). It is an exceedingly low risk bug. The range check is
asserting that the GuC firmware version is within spec. So it should
not be possible to ever have a firmware file that fails this check. If
larger version numbers are required in the future, that would be a
backwards breaking spec change and thus require a major version bump,
in which case an old i915 driver would not load that new version anyway.

Fixes: 9bbba066 ("drm/i915/guc: Use GuC submission API version number")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421224742.2357198-1-John.C.Harrison@Intel.com

WA 18018781329 is applicable now across all MTL
steppings.

V2:
  - Remove IS_MTL check, code already running for MTL - Matt

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424101749.3719600-1-tejas.upadhyay@intel.com

igt_live_test has pr_err dumped in case of some
GT failures. It will be more informative regarding
GT if we use gt_err instead.

Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424133607.3736825-1-tejas.upadhyay@intel.com

This patch implements Wa_22016122933.

In MTL, memory writes initiated by the Media tile update the whole
cache line, even for partial writes. This creates a coherency
problem for cacheable memory if both CPU and GPU are writing data
to different locations within a single cache line.
This patch circumvents the issue by making CPU/GPU shared memory
uncacheable (WC on CPU side, and PAT index 2 for GPU).  Additionally,
it ensures that CPU writes are visible to the GPU with an
intel_guc_write_barrier().

While fixing the CTB issue, we noticed some random GSC firmware
loading failure because the share buffers are cacheable (WB) on CPU
side but uncached on GPU side. To fix these issues we need to map
such shared buffers as WC on CPU side. Since such allocations are
not all done through GuC allocator, to avoid too many code changes,
the i915_coherent_map_type() is now hard coded to return WC for MTL.

v2: Simplify the commit message(Matt).

BSpec: 45101
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424182902.3663500-3-fei.yang@intel.com

PTE encode functions are platform dependent. This patch implements
PTE functions for MTL, and ensures the correct PTE encode function
is used by calling pte_encode function pointer instead of the
hardcoded gen8 version of PTE encode.

Fixes: b76c0dee ("drm/i915/mtl: Define MOCS and PAT tables for MTL")
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230424182902.3663500-2-fei.yang@intel.com

In the process of renaming all instances of 'dev_priv' to 'i915',
start using 'i915' within the i915_drv.h file.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421190026.294208-3-andi.shyti@linux.intel.com

for_each_engine() loops through engines in the GT, not in
dev_priv.  Because it's misleading, call it "gt__" instead of
"dev_priv__".
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421190026.294208-2-andi.shyti@linux.intel.com

Media GT has a different base for MOCS register, need to apply
gsi_offset to the mmio address if not using the intel_uncore_r/w
functions for register access.

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421182535.292670-3-andi.shyti@linux.intel.com

On MTL, GT can no longer allocate on LLC - only the CPU can.
This, along with programming new register bits that MTL
requires calls for a MOCS/PAT table update.
Also the PAT index registers are multicasted for primary GT,
and there is an address jump from index 7 to 8. This patch
makes sure that these registers are programmed in the proper
way.

BSpec: 44509, 45101, 44235

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230421182535.292670-2-andi.shyti@linux.intel.com

On MTL, LLC is not shared between GT and CPU, set has_llc=0.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420102349.15302-1-nirmoy.das@intel.com

Workaround implementation to clear RDOP clock gating.

Bspec: 66622
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418220446.2205509-5-radhakrishna.sripada@intel.com

Wa_22011802037 was being applied to all graphics_ver 11 & 12. This patch
updates the if statement to apply the W/A to right platforms and extends
it to MTL-M:A step.

v1.1: Fix checkpatch warning.
v2: Change the check to reflect the wa at other places(Lucas)

Bspec: 66622
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418220446.2205509-4-radhakrishna.sripada@intel.com

In order to enable complete multi-GT, loop through all
the GTs, rather than relying on the to_gt(), which only
provides a reference to the primary GT.

Problem appear when it runs on platform like MTL where
different set of engines are possible on different GTs.
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419060036.3422635-4-tejas.upadhyay@intel.com

In order to enable complete multi-GT, use the GT
reference obtained directly from the engine, rather
than relying on the to_gt(), which only provides a
reference to the primary GT.

Problem appear when it runs on platform like MTL
where different set of engines are possible on
different GTs.
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419060036.3422635-3-tejas.upadhyay@intel.com

In order to enable complete multi-GT, use the GT
reference obtained directly from the engine, rather
than relying on the to_gt(), which only provides a
reference to the primary GT.

Problem appear when it runs on platform like MTL
where different set of engines are possible on
different GTs.

Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419060036.3422635-2-tejas.upadhyay@intel.com

In multi-gt systems IRQs need to be reset and enabled per GT.

This might add some redundancy when handling interrupts for
engines that might not exist in every tile, but helps to keep the
code cleaner and more understandable.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417235356.1291060-1-andi.shyti@linux.intel.com

This patch fixes memory leaks on error escapes in function fake_get_pages

Fixes: c3bfba9a ("drm/i915: Check for integer truncation on scatterlist creation")
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414224109.1051922-1-andi.shyti@linux.intel.com

When HuC is loaded by GSC, there is no header definition for the kernel
to look at and firmware is just handed to GSC. However when reading the
version, it should still check the size of the blob to guarantee it's not
incurring into out-of-bounds array access.

If firmware is smaller than expected, the following message is now
printed:

	# echo boom > /lib/firmware/i915/dg2_huc_gsc.bin
	# dmesg | grep -i huc
	[drm] GT0: HuC firmware i915/dg2_huc_gsc.bin: invalid size: 5 < 184
	[drm] *ERROR* GT0: HuC firmware i915/dg2_huc_gsc.bin: fetch failed -ENODATA
	...

Even without this change the size, header and signature are still
checked by GSC when loading, so this only avoids the out-of-bounds array
access.

Fixes: a7b516bd ("drm/i915/huc: Add fetch support for gsc-loaded HuC binary")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200349.3492571-1-lucas.demarchi@intel.com

Stolen memory is not usable for MTL A0 stepping beyond
certain access size and we have no control over userspace
access size of /dev/fb which can be backed by stolen memory.
So disable stolen memory backed fb by setting i915->dsm.usable_size
to zero.

v2: remove hsdes reference and fix commit message(Andi)
v3: use revid as we want to target SOC stepping(Radhakrishna)

Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404181342.23362-1-nirmoy.das@intel.com

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'mediatek-drm-next-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 6.4

1. Add support for 10-bit overlays
2. Add MediaTek SoC DRM (vdosys1) support for mt8195
3. Change mmsys compatible for mt8195 mediatek-drm
4. Only trigger DRM HPD events if bridge is attached
5. Change the aux retries times when receiving AUX_DEFER
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230410233005.2572-1-chunkuang.hu@kernel.org

main pull request for v6.4

Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
  custom thing to calculate the start of next vblank

DP:
==
* interrupts cleanup

DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files

DSI:
===
* rework DSI instance ID detection on obscure platforms

GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
  reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support

Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:

Conflict between the 7fa5047a ("drm: Use of_property_present() for
testing DT property presence") and 9f251f93 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.

From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.comSigned-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge tag 'drm-habanalabs-next-2023-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next

This tag contains additional habanalabs driver changes for v6.4:

- uAPI changes:
  - Add a definition of a new Gaudi2 server type. This is used by userspace
    to know what is the connectivity between the accelerators inside the
    server

- New features and improvements:
  - speedup h/w queues test in Gaudi2 to reduce device initialization times.

- Firmware related fixes:
  - Fixes to the handshake protocol during f/w initialization.
  - Sync f/w events interrupt in hard reset to avoid warning message.
  - Improvements to extraction of the firmware version.

- Misc bug fixes and code cleanups. Notable fixes are:
  - Multiple fixes for interrupt handling in Gaudi2.
  - Unmap mapped memory in case TLB invalidation fails.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230410124637.GA2441888@ogabbay-vm-u20.habana-labs.com

hl_sysfs_fini() is called only if hl_sysfs_init() completes
successfully. Therefore if hl_sysfs_init() fails, need to remove any
sysfs group that was added until that point.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

HW queues testing at driver load and after reset takes a substantial
amount of time.
This commit reduces the queues test time in Gaudi2 devices by running
all the tests in parallel instead of one after the other.
Time measurements on tests duration shows that the new method is almost
x100 faster than the serial approach.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

There is only single eq entry for arc farm sei event which aggregates
events from the four arc farms.
Fix the code to handle this event according to this behavior.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Multi MSI interrupts aren't working in Gaudi1 and because of that,
we are only using a single MSI interrupt. Therefore, let's remove this
dead code in order to avoid confusion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add definition of a new Gaudi2 server type. This represents
the connectivity between the cards in that server type.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Removing redundant asic prop variable as we don't need to expose this
to common code. In addition, fix some typos.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Sending COMMS_GOTO_WFE instructs the FW's CPU to halt (WFE state).
Once sent, FW's CPU isn't expected to continue communicating with LKD.
Therefore, the stage of waiting for COMMS_STS_OK should be skipped or
else waiting for COMMS_STS_OK will simply timeout, which will trigger
unexpected behavior.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Receiving events from FW, while the device is in hard reset, causes
a warning message in Driver log. The message may point to a
problem in the Driver or FW. But It also can appear as a result
of events that have been sent from FW just before the hard reset.
In order to avoid receiving events from FW while the device is in reset
and is already in 'disabled' mode, sync the f/w events interrupt right
before setting the device to 'disabled'.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

During event handling, driver sets relevant reset and user event
notifier flags. Fix few wrong flags settings.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The decoder IRQ status register may have several set bits upon an
abnormal interrupt. Therefore, when setting the events mask, need to
check all bits and not using if-else.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Decoder abnormal interrupts are for errors and not for completion, so
rename the relevant work and work function to not include 'completion'.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>