- 25 Mar, 2021 19 commits
-
-
Argus Lin authored
MT6359 audio codec supports jack detection feature, adds MT6359 accdet driver to support jack plugged detection and key detection. Signed-off-by: Argus Lin <argus.lin@mediatek.com> Link: https://lore.kernel.org/r/1615383186-18500-3-git-send-email-argus.lin@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Argus Lin authored
This patch adds MediaTek MT6359 ASoC accdet jack document. Signed-off-by: Argus Lin <argus.lin@mediatek.com> Link: https://lore.kernel.org/r/1615383186-18500-2-git-send-email-argus.lin@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series "Add audio driver base on rpmsg on i.MX platform" from Shengjiu Wang <shengjiu.wang@nxp.com>: On Asymmetric multiprocessor, there is Cortex-A core and Cortex-M core, Linux is running on A core, RTOS is running on M core. The audio hardware device can be controlled by Cortex-M device, So audio playback/capture can be handled by M core. Rpmsg is the interface for sending and receiving msg to and from M core, that we can create a virtual sound on Cortex-A core side. A core will tell the Cortex-M core sound format/rate/channel, where is the data buffer, what is the period size, when to start, when to stop and when suspend or resume happen, each of this behavior there is defined rpmsg command. Especially we designed the low power audio case, that is to allocate a large buffer and fill the data, then Cortex-A core can go to sleep mode, Cortex-M core continue to play the sound, when the buffer is consumed, Cortex-M core will trigger the Cortex-A core to wakeup to fill data. changes in v5: - remove unneeded property in binding doc and driver - update binding doc according to Rob's comments. - Fix link issue reported by kernel test robot changes in v4: - remove the sound card node, merge the property to cpu dai node according to Rob's comments. - sound card device will be registered by cpu dai driver. - Fix do_div issue reported by kernel test robot changes in v3: - add local refcount for clk enablement in hw_params() - update the document according Rob's comments changes in v2: - update codes and comments according to Mark's comments Shengjiu Wang (6): ASoC: soc-component: Add snd_soc_pcm_component_ack ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg ASoC: dt-bindings: fsl_rpmsg: Add binding doc for rpmsg audio device ASoC: imx-audio-rpmsg: Add rpmsg_driver for audio channel ASoC: imx-pcm-rpmsg: Add platform driver for audio base on rpmsg ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg .../devicetree/bindings/sound/fsl,rpmsg.yaml | 108 +++ include/sound/soc-component.h | 3 + sound/soc/fsl/Kconfig | 30 + sound/soc/fsl/Makefile | 6 + sound/soc/fsl/fsl_rpmsg.c | 279 ++++++ sound/soc/fsl/fsl_rpmsg.h | 35 + sound/soc/fsl/imx-audio-rpmsg.c | 140 +++ sound/soc/fsl/imx-pcm-rpmsg.c | 918 ++++++++++++++++++ sound/soc/fsl/imx-pcm-rpmsg.h | 512 ++++++++++ sound/soc/fsl/imx-rpmsg.c | 150 +++ sound/soc/soc-component.c | 14 + sound/soc/soc-pcm.c | 2 + 12 files changed, 2197 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml create mode 100644 sound/soc/fsl/fsl_rpmsg.c create mode 100644 sound/soc/fsl/fsl_rpmsg.h create mode 100644 sound/soc/fsl/imx-audio-rpmsg.c create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.c create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.h create mode 100644 sound/soc/fsl/imx-rpmsg.c -- 2.27.0
-
Mark Brown authored
Merge series "ASoC: soc.h: small cleanups" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are small cleanups for soc.h Kuninori Morimoto (3): ASoC: soc.h: add asoc_link_to_cpu/codec/platform() macro ASoC: soc.h: fixup return timing for snd_soc_fixup_dai_links_platform_name() ASoC: soc.h: return error if multi platform at snd_soc_fixup_dai_links_platform_name() include/sound/soc.h | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) -- 2.25.1 Thank you for your help !! Best regards --- Kuninori Morimoto
-
Shengjiu Wang authored
The call sequence in wm8960_configure_clocking is ret = wm8960_configure_sysclk(); if (ret >= 0) goto configure_clock; .... ret = wm8960_configure_pll(); configure_clock: ... wm8960_configure_sysclk is called before wm8960_configure_pll, as there is bitclk relax on both functions, so wm8960_configure_sysclk always return success, then wm8960_configure_pll() never be called. With this case: aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll. it can get correct bitclk 2304000. So bitclk relax condition should be removed in wm8960_configure_sysclk, then wm8960_configure_pll can be called, and there is also bitclk relax function in wm8960_configure_pll. Fixes: 3c01b9ee ("ASoC: codec: wm8960: Relax bit clock computation") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
The WM8958 codec is used on i.MX7D val board. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615986303-27959-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
WM8958 codec is used on some i.MX based platform. So add it support in this generic driver. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615986303-27959-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Ryan Lee authored
3 new controls are added. "OVC Autorestart Switch" : controls whether or not the speaker amplifier automatically re-enables after an overcurrent fault condition. "THERM Autorestart Switch" : controls whether or not the device automatically resumes playback when the die temperature recovers from thermal shutdown. "CMON Autorestart Switch" : controls whether or not the device automatically resumes playback when the clock returns after stopping. Above Auto Restart functions are enabled by default. Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20210325033555.29377-3-ryans.lee@maximintegrated.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Jack Yu authored
Add bclk detection and dc detection before playback. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210322055053.31797-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Tian Tao authored
Use the of_device_get_match_data() helper instead of open coding. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1616385476-53327-1-git-send-email-tiantao6@hisilicon.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
snd_soc_fixup_dai_links_platform_name() is assuming it is single platform. return error if multi platforms. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871rc7aoo9.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Current snd_soc_fixup_dai_links_platform_name() creates name first (A), and checks setup target pointer (B), and set it (C). We should check target pointer first IMO. This patch exchange the order to (B) -> (A) -> (C). int snd_soc_fixup_dai_links_platform_name(...) { ... /* set platform name for each dailink */ for_each_card_prelinks(card, i, dai_link) { (A) name = devm_kstrdup(...); if (!name) return -ENOMEM; (B) if (!dai_link->platforms) return -EINVAL; /* only single platform is supported for now */ (C) dai_link->platforms->name = name; } return 0; } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/8735wnaoon.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
We shouldn't use dai_link->cpus/codecs/platforms directly, because these are array now to supporting multi CPU/Codec/Platform. This patch adds asoc_link_to_xxx() macro for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/874kh3aopc.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
The platform device is not registered by device tree or cpu dai driver, it is registered by the rpmsg channel, So add a dedicated machine driver to handle this case. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615516725-4975-7-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
Platform driver based on rpmsg is the interface for sending and receiving rpmsg to and from M core. It will tell the Cortex-M core sound format/rate/channel, where is the data buffer, where is the period size, when to start, when to stop and when suspend or resume happen, each this behavior there is defined rpmsg command. Especially we designed the low power audio case, that is to allocate a large buffer and fill the data, then Cortex-A core can go to sleep mode, Cortex-M core continue to play the sound, when the buffer is consumed, Cortex-M core will trigger the Cortex-A core to wake up. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615516725-4975-6-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
This driver is used to accept the message from rpmsg audio channel, and if this driver is probed, it will help to register the platform driver, the platform driver will use this audio channel to send and receive messages to and from Cortex-M core. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615516725-4975-5-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
fsl_rpmsg is a virtual audio device. Mapping to real hardware devices are SAI, DMA controlled by Cortex M core. What we see from Linux side is a device which provides audio service by rpmsg channel. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615516725-4975-4-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
This is a cpu dai driver for rpmsg audio use case, which is mainly used for getting the user's configuration from devicetree and configure the clocks which is used by Cortex-M core. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615516725-4975-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
Add snd_soc_pcm_component_ack back, which can be used to get an updated buffer pointer in the platform driver. On Asymmetric multiprocessor, this pointer can be sent to Cortex-M core for audio processing. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1615516725-4975-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 24 Mar, 2021 14 commits
-
-
Mark Brown authored
Merge series "MFD/extcon/ASoC: Rework arizona codec jack-detect support" from Hans de Goede <hdegoede@redhat.com>: Hi All, Here is v4 of my series to rework the arizona codec jack-detect support to use the snd_soc_jack helpers instead of direct extcon reporting. As discussed before here is a resend rebased on 5.12-rc2, making sure that all patches this depends on are in place. Lee, can you pick-up patches 1-6 through the MFD tree and then send a pull-req to Mark so that Mark can merge the Asoc parts throught the ASoC tree ? Patches 2-6 touch drivers/extcon, these all have an Ack from Chanwoo Choi for merging these through the MFD tree. Here is some more generic info on this series from the previous cover-letter: This is done by reworking the extcon driver into an arizona-jackdet library and then modifying the codec drivers to use that directly, replacing the old separate extcon child-devices and extcon-driver. This brings the arizona-codec jack-detect handling inline with how all other ASoC codec driver do this. This was developed and tested on a Lenovo Yoga Tablet 1051L with a WM5102 codec. This was also tested by Charles Keepax, one of the Cirrus Codec folks. Regards, Hans Hans de Goede (13): mfd: arizona: Drop arizona-extcon cells extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged extcon: arizona: Fix various races on driver unbind extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol") call extcon: arizona: Always use pm_runtime_get_sync() when we need the device to be awake ASoC/extcon: arizona: Move arizona jack code to sound/soc/codecs/arizona-jack.c ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv ASoC: arizona-jack: Use arizona->dev for runtime-pm ASoC: arizona-jack: convert into a helper library for codec drivers ASoC: arizona-jack: Use snd_soc_jack to report jack events ASoC: arizona-jack: Cleanup logging ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use the new jack library ASoC: Intel: bytcr_wm5102: Add jack detect support MAINTAINERS | 3 +- drivers/extcon/Kconfig | 8 - drivers/extcon/Makefile | 1 - drivers/mfd/arizona-core.c | 20 - sound/soc/codecs/Makefile | 2 +- .../soc/codecs/arizona-jack.c | 577 +++++++----------- sound/soc/codecs/arizona.h | 44 ++ sound/soc/codecs/wm5102.c | 12 +- sound/soc/codecs/wm5110.c | 12 +- sound/soc/codecs/wm8997.c | 14 +- sound/soc/codecs/wm8998.c | 9 + sound/soc/intel/boards/bytcr_wm5102.c | 28 +- 12 files changed, 325 insertions(+), 405 deletions(-) rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (76%) -- 2.30.1
-
Hans de Goede authored
Add jack detect support by creating a jack and calling snd_soc_component_set_jack to register the created jack with the codec. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-14-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Make all arizona codec drivers for which drivers/mfd/arizona-core.c used to instantiate a "arizona-extcon" child-device use the new arizona-jack.c library for jack-detection. This has been tested on a Lenovo Yoga Tablet 2 1051L with a WM5102 codec. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-13-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Cleanup the use of dev_foo functions used for logging: 1. Many of these are unnecessarily split over multiple lines 2. Use dev_err_probe() in cases where we might get a -EPROBE_DEFER return value Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-12-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Use the snd_soc_jack code to report jack events, instead of using extcon for reporting the cable-type + an input_dev for reporting the button presses. The snd_soc_jack code will report the cable-type through both input_dev events and through ALSA controls and the button-presses through input_dev events. Note that this means that when the codec drivers are moved over to use the new arizona-jack.c library code instead of having a separate MFD extcon cell with the extcon-arizona.c driver, we will no longer report extcon events to userspace for cable-type changes. This should not be a problem since "standard" Linux distro userspace does not (and has never) used the extcon class interface for this. Android does have support for the extcon class interface, but that was introduced in the same release as support for input_dev cable-type events, so this should not be a problem for Android either. Note this also reduces ARIZONA_MAX_MICD_RANGE from 8 to 6, this is ok to do since this info is always provided through pdata (or defaults) and cannot be overridden from devicetree. All in-kernel users of the pdata (and the fallback defaults) define 6 or less buttons/ranges. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-11-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Convert the arizona extcon driver into a helper library for direct use from the arizona codec-drivers, rather then being bound to a separate MFD cell. Note the probe (and remove) sequence is split into 2 parts: 1. The arizona_jack_codec_dev_probe() function inits a bunch of jack-detect specific variables in struct arizona_priv and tries to get a number of resources where getting them may fail with -EPROBE_DEFER. 2. Then once the machine driver has create a snd_sock_jack through snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on the codec component, which will call the new arizona_jack_set_jack(), which sets up jack-detection and requests the IRQs. This split is necessary, because the IRQ handlers need access to the arizona->dapm pointer and the snd_sock_jack which are not available when the codec-driver's probe function runs. Note this requires that machine-drivers for codecs which are converted to use the new helper functions from arizona-jack.c are modified to create a snd_soc_jack through snd_soc_card_jack_new() and register this jack with the codec through snd_soc_component_set_jack(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-10-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Drivers for MFD child-devices such as the arizona codec drivers and the arizona-extcon driver can choose to either make runtime_pm_get/_put calls on their own child-device, which will then be propagated to their parent; or they can make them directly on their MFD parent-device. The arizona-extcon code was using runtime_pm_get/_put calls on its own child-device where as the codec drivers are using runtime_pm_get/_put calls on their parent. The arizona-extcon MFD cell/child-device has been removed and this commit is part of refactoring the arizona-extcon code into a library to be used directly from the codec drivers. Specifically this commit moves the code over to make runtime_pm_get/_put calls on the parent device (on arizona->dev) bringing the code inline with how the codec drivers do this. Note this also removes the pm_runtime_enable/_disable calls as pm_runtime support has already been enabled on the parent-device by the arizona MFD driver. This is part of a patch series converting the arizona extcon driver into a helper library for letting the arizona codec-drivers directly report jack state through the standard sound/soc/soc-jack.c functions. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-9-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Move all the jack-detect variables from struct arizona_extcon_info to struct arizona_priv. This is part of a patch series converting the arizona extcon driver into a helper library for letting the arizona codec-drivers directly report jack state through the standard sound/soc/soc-jack.c functions. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210307151807.35201-8-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When there is power domain bind with ipg_clk clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/1616579928-22428-7-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When there is power domain bind with ipg clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1616579928-22428-6-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When there is power domain bind with mem clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1616579928-22428-5-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When there is power domain bind with mem clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1616579928-22428-4-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When there is power domain bind with core clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1616579928-22428-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When there is power domain bind with bus clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk,but explicitly enable clock when it is used. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1616579928-22428-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 23 Mar, 2021 2 commits
-
-
Mark Brown authored
Merge tag 'ib-mfd-extcon-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into asoc-5.13 Immutable branch between MFD and Extcon due for the v5.13 merge window
-
Kai Vehmanen authored
Controller needs to ensure display power is enabled only for HDA controller reset. Drop the display power-up/down calls from D0i3 entry/exit paths. This was previously not possible as codec drivers could not resume the links, and instead controller kept the reference to display power. The state of display power had be maintained in the D0i3 entry/exit code. With commit 87fc20e4 ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management"), this is no longer needed and the code can be cleaned up. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Keyon Jie <yang.jie@intel.com> Link: https://lore.kernel.org/r/20210322143830.3880293-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 22 Mar, 2021 4 commits
-
-
Keyon Jie authored
We should use the topology configured mclk if it existed, which can make sure we are aligned with the FW side about the mclk usage. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210319124950.3853994-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
Add helper sof_dai_ssp_mclk to get the topology configured MCLK from a pcm_runtime, return 0 if it is not available, and error if the dai type is not SSP at the moment. Export the helper for external use, e.g. from machine drivers. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210319124950.3853994-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
When there is power domain bind with bus clock, The call flow: devm_regmap_init_mmio_clk - clk_prepare() - clk_pm_runtime_get() cause the power domain of clock always be enabled after regmap_init(). which impact the power consumption. So use devm_regmap_init_mmio instead of devm_regmap_init_mmio_clk, then explicitly enable clock when using by pm_runtime_get(), if CONFIG_PM=n, then fsl_sai_runtime_resume will be explicitly called. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Link: https://lore.kernel.org/r/1616141203-13344-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Vijendar Mukunda authored
Add support for RT5682 codec in machine driver. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/1616118056-5506-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 19 Mar, 2021 1 commit
-
-
Mark Brown authored
Merge series "ASoC: tidyup error message timing" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark Indicating error message when failed case is very useful for debuging. In many case, it uses below style. int function(...) { ... return ret; } int caller(...) { ... ret = function(...); if (ret < 0) dev_err(...) ... } This is not so bad, but in this style *each caller* needs to indicate duplicate same error message, and some caller is forgetting to do it. And caller can't indicate detail function() error information. I know many people have many opinion, but if function() indicates error message, we can get same and detail information without forgot, and it is better. This patch-set tidyup to do it. int function(...) { ... if (ret < 0) dev_err(...) return ret; } int caller(...) { ... ret = function(...); ... } Kuninori Morimoto (14): ASoC: soc-pcm: indicate error message at soc_pcm_open() ASoC: soc-pcm: indicate error message at soc_pcm_hw_params() ASoC: soc-pcm: indicate error message at soc_pcm_prepare() ASoC: soc-pcm: indicate error message at dpcm_path_get() ASoC: soc-pcm: indicate error message at dpcm_be_dai_trigger() ASoC: soc-pcm: indicate error message at dpcm_apply_symmetry() ASoC: soc-pcm: indicate error message at dpcm_run_update_startup/shutdown() ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_startup() ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_hw_params() ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_prepare() ASoC: soc-pcm: don't indicate error message for soc_pcm_hw_free() ASoC: soc-pcm: don't indicate error message for dpcm_be_dai_hw_free() ASoC: don't indicate error message for snd_soc_[pcm_]dai_xxx() ASoC: don't indicate error message for snd_soc_[pcm_]component_xxx() include/sound/soc-dpcm.h | 2 +- sound/soc/soc-compress.c | 9 +- sound/soc/soc-core.c | 22 +---- sound/soc/soc-dapm.c | 24 ++--- sound/soc/soc-pcm.c | 197 +++++++++++++++++++-------------------- 5 files changed, 108 insertions(+), 146 deletions(-) -- 2.25.1
-