- 08 Apr, 2017 15 commits
-
-
Michel Dänzer authored
commit ce4b4f22 upstream. We were accidentally only overriding the first VRAM placement. For BOs with the RADEON_GEM_NO_CPU_ACCESS flag set, radeon_ttm_placement_from_domain creates a second VRAM placment with fpfn == 0. If VRAM is almost full, the first VRAM placement with fpfn > 0 may not work, but the second one with fpfn == 0 always will (the BO's current location trivially satisfies it). Because "moving" the BO to its current location puts it back on the LRU list, this results in an infinite loop. Fixes: 2a85aedd ("drm/radeon: Try evicting from CPU accessible to inaccessible VRAM first") Reported-by:
Zachary Michaels <zmichaels@oblong.com> Reported-and-Tested-by:
Julien Isorce <jisorce@oblong.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Xu authored
commit df630b8c upstream. When releasing the bus, let's clear the bus pointers to mark it out. If any further device unregister happens on this bus, we know that we're done if we found the bus being released already. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Alan Stern authored
commit 16336820 upstream. Using KASAN, Dmitry found a bug in the rh_call_control() routine: If buffer allocation fails, the routine returns immediately without unlinking its URB from the control endpoint, eventually leading to linked-list corruption. This patch fixes the problem by jumping to the end of the routine (where the URB is unlinked) when an allocation failure occurs. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Nicolas Ferre authored
commit 497e1e16 upstream. A side effect of 89d82324 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") is that the console can be called with TX path disabled. Then the system would hang trying to push charecters out in atmel_console_putchar(). Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 89d82324 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") Signed-off-by:
-
Richard Genoud authored
commit 31ca2c63 upstream. If uart_flush_buffer() is called between atmel_tx_dma() and atmel_complete_tx_dma(), the circular buffer has been cleared, but not atmel_port->tx_len. That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE - atmel_port->tx_len) bytes). Tested-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
-
Joerg Roedel authored
commit 08f63d97 upstream. No platform-device is required for IO(x)APICs, so don't even create them. [ rjw: This fixes a problem with leaking platform device objects after IOAPIC/IOxAPIC hot-removal events.] Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 61b79e16 upstream. Paul Menzel reported a warning: WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0 Bad frame pointer: expected f6919d98, received f6919db0 from func acpi_pm_device_sleep_wake return to c43b6f9d The warning means that function graph tracing is broken for the acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile unconditionally sets the '-Os' gcc flag to optimize for size. That's an issue because mcount-based function graph tracing is incompatible with '-Os' on x86, thanks to the following gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109 I have another patch pending which will ensure that mcount-based function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on x86. But this patch is needed in addition to that one because the ACPI Makefile overrides that config option for no apparent reason. It has had this flag since the beginning of git history, and there's no related comment, so I don't know why it's there. As far as I can tell, there's no reason for it to be there. The appropriate behavior is for it to honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the kernel. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Songjun Wu authored
commit cd3ac9af upstream. Fix the audio clock rate according to the datasheet. Reported-by:
Dushara Jayasinghe <dushara@successful.com.au> Signed-off-by:
Songjun Wu <songjun.wu@microchip.com> Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Hui Wang authored
commit 2f726aec upstream. On this Dell AIO machine, the lineout jack does not work. We found the pin 0x1a is assigned to lineout on this machine, and in the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the heaset-set mic problem for this machine, this fixup will redefine the pin 0x1a to headphone-mic, as a result the lineout doesn't work anymore. After consulting with Dell, they told us this machine doesn't support microphone via headset jack, so we add a new fixup which only defines the pin 0x18 as the headset-mic. [rearranged the fixup insertion position by tiwai in order to make the merge with other branches easier -- tiwai] Fixes: 59ec4b57 ("ALSA: hda - Fix headset mic detection problem for two dell machines") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 2d7d5400 upstream. When a new event is queued while processing to resize the FIFO in snd_seq_fifo_clear(), it may lead to a use-after-free, as the old pool that is being queued gets removed. For avoiding this race, we need to close the pool to be deleted and sync its usage before actually deleting it. The issue was spotted by syzkaller. Reported-by:
-
John Garry authored
commit 9702c67c upstream. The total ata xfer length may not be calculated properly, in that we do not use the proper method to get an sg element dma length. According to the code comment, sg_dma_len() should be used after dma_map_sg() is called. This issue was found by turning on the SMMUv3 in front of the hisi_sas controller in hip07. Multiple sg elements were being combined into a single element, but the original first element length was being use as the total xfer length. Fixes: ff2aeb1e ("libata: convert to chained sg") Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
peter chang authored
commit bf33f87d upstream. The user can control the size of the next command passed along, but the value passed to the ioctl isn't checked against the usable max command size. Signed-off-by:
Peter Chang <dpf@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
James Bottomley authored
commit ffb58456 upstream. mpt3sas has a firmware failure where it can only handle one pass through ATA command at a time. If another comes in, contrary to the SAT standard, it will hang until the first one completes (causing long commands like secure erase to timeout). The original fix was to block the device when an ATA command came in, but this caused a regression with commit 669f0441 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Tue Nov 22 16:17:13 2016 -0800 scsi: srp_transport: Move queuecommand() wait code to SCSI core So fix the original fix of the secure erase timeout by properly returning SAM_STAT_BUSY like the SAT recommends. The original patch also had a concurrency problem since scsih_qcmd is lockless at that point (this is fixed by using atomic bitops to set and test the flag). [mkp: addressed feedback wrt. test_bit and fixed whitespace] Fixes: 18f6084a (mpt3sas: Fix secure erase premature termination) Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Ingo Molnar <mingo@kernel.org> Tested-by:
-
Ross Lagerwall authored
commit 7ecec850 upstream. When relocating the p2m, take special care not to relocate it so that is overlaps with the current location of the p2m/initrd. This is needed since the full extent of the current location is not marked as a reserved region in the e820. This was seen to happen to a dom0 with a large initial p2m and a small reserved region in the middle of the initial p2m. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Ilya Dryomov authored
commit 633ee407 upstream. sock_alloc_inode() allocates socket+inode and socket_wq with GFP_KERNEL, which is not allowed on the writeback path: Workqueue: ceph-msgr con_work [libceph] ffff8810871cb018 0000000000000046 0000000000000000 ffff881085d40000 0000000000012b00 ffff881025cad428 ffff8810871cbfd8 0000000000012b00 ffff880102fc1000 ffff881085d40000 ffff8810871cb038 ffff8810871cb148 Call Trace: [<ffffffff816dd629>] schedule+0x29/0x70 [<ffffffff816e066d>] schedule_timeout+0x1bd/0x200 [<ffffffff81093ffc>] ? ttwu_do_wakeup+0x2c/0x120 [<ffffffff81094266>] ? ttwu_do_activate.constprop.135+0x66/0x70 [<ffffffff816deb5f>] wait_for_completion+0xbf/0x180 [<ffffffff81097cd0>] ? try_to_wake_up+0x390/0x390 [<ffffffff81086335>] flush_work+0x165/0x250 [<ffffffff81082940>] ? worker_detach_from_pool+0xd0/0xd0 [<ffffffffa03b65b1>] xlog_cil_force_lsn+0x81/0x200 [xfs] [<ffffffff816d6b42>] ? __slab_free+0xee/0x234 [<ffffffffa03b4b1d>] _xfs_log_force_lsn+0x4d/0x2c0 [xfs] [<ffffffff811adc1e>] ? lookup_page_cgroup_used+0xe/0x30 [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa03b4dcf>] xfs_log_force_lsn+0x3f/0xf0 [xfs] [<ffffffffa039a723>] ? xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa03a62c6>] xfs_iunpin_wait+0xc6/0x1a0 [xfs] [<ffffffff810aa250>] ? wake_atomic_t_function+0x40/0x40 [<ffffffffa039a723>] xfs_reclaim_inode+0xa3/0x330 [xfs] [<ffffffffa039ac07>] xfs_reclaim_inodes_ag+0x257/0x3d0 [xfs] [<ffffffffa039bb13>] xfs_reclaim_inodes_nr+0x33/0x40 [xfs] [<ffffffffa03ab745>] xfs_fs_free_cached_objects+0x15/0x20 [xfs] [<ffffffff811c0c18>] super_cache_scan+0x178/0x180 [<ffffffff8115912e>] shrink_slab_node+0x14e/0x340 [<ffffffff811afc3b>] ? mem_cgroup_iter+0x16b/0x450 [<ffffffff8115af70>] shrink_slab+0x100/0x140 [<ffffffff8115e425>] do_try_to_free_pages+0x335/0x490 [<ffffffff8115e7f9>] try_to_free_pages+0xb9/0x1f0 [<ffffffff816d56e4>] ? __alloc_pages_direct_compact+0x69/0x1be [<ffffffff81150cba>] __alloc_pages_nodemask+0x69a/0xb40 [<ffffffff8119743e>] alloc_pages_current+0x9e/0x110 [<ffffffff811a0ac5>] new_slab+0x2c5/0x390 [<ffffffff816d71c4>] __slab_alloc+0x33b/0x459 [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0 [<ffffffff8164bda1>] ? inet_sendmsg+0x71/0xc0 [<ffffffff815b906d>] ? sock_alloc_inode+0x2d/0xd0 [<ffffffff811a21f2>] kmem_cache_alloc+0x1a2/0x1b0 [<ffffffff815b906d>] sock_alloc_inode+0x2d/0xd0 [<ffffffff811d8566>] alloc_inode+0x26/0xa0 [<ffffffff811da04a>] new_inode_pseudo+0x1a/0x70 [<ffffffff815b933e>] sock_alloc+0x1e/0x80 [<ffffffff815ba855>] __sock_create+0x95/0x220 [<ffffffff815baa04>] sock_create_kern+0x24/0x30 [<ffffffffa04794d9>] con_work+0xef9/0x2050 [libceph] [<ffffffffa04aa9ec>] ? rbd_img_request_submit+0x4c/0x60 [rbd] [<ffffffff81084c19>] process_one_work+0x159/0x4f0 [<ffffffff8108561b>] worker_thread+0x11b/0x530 [<ffffffff81085500>] ? create_worker+0x1d0/0x1d0 [<ffffffff8108b6f9>] kthread+0xc9/0xe0 [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90 [<ffffffff816e1b98>] ret_from_fork+0x58/0x90 [<ffffffff8108b630>] ? flush_kthread_worker+0x90/0x90 Use memalloc_noio_{save,restore}() to temporarily force GFP_NOIO here. Link: http://tracker.ceph.com/issues/19309Reported-by:
Sergey Jerusalimov <wintchester@gmail.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
- 31 Mar, 2017 15 commits
-
-
Greg Kroah-Hartman authored
-
Sebastian Andrzej Siewior authored
commit 619bd4a7 upstream. Since the change in commit: fd7a4bed ("sched, rt: Convert switched_{from, to}_rt() / prio_changed_rt() to balance callbacks") ... we don't reschedule a task under certain circumstances: Lets say task-A, SCHED_OTHER, is running on CPU0 (and it may run only on CPU0) and holds a PI lock. This task is removed from the CPU because it used up its time slice and another SCHED_OTHER task is running. Task-B on CPU1 runs at RT priority and asks for the lock owned by task-A. This results in a priority boost for task-A. Task-B goes to sleep until the lock has been made available. Task-A is already runnable (but not active), so it receives no wake up. The reality now is that task-A gets on the CPU once the scheduler decides to remove the current task despite the fact that a high priority task is enqueued and waiting. This may take a long time. The desired behaviour is that CPU0 immediately reschedules after the priority boost which made task-A the task with the lowest priority. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Eric Biggers authored
commit 1b53cf98 upstream. Filesystem encryption ostensibly supported revoking a keyring key that had been used to "unlock" encrypted files, causing those files to become "locked" again. This was, however, buggy for several reasons, the most severe of which was that when key revocation happened to be detected for an inode, its fscrypt_info was immediately freed, even while other threads could be using it for encryption or decryption concurrently. This could be exploited to crash the kernel or worse. This patch fixes the use-after-free by removing the code which detects the keyring key having been revoked, invalidated, or expired. Instead, an encrypted inode that is "unlocked" now simply remains unlocked until it is evicted from memory. Note that this is no worse than the case for block device-level encryption, e.g. dm-crypt, and it still remains possible for a privileged user to evict unused pages, inodes, and dentries by running 'sync; echo 3 > /proc/sys/vm/drop_caches', or by simply unmounting the filesystem. In fact, one of those actions was already needed anyway for key revocation to work even somewhat sanely. This change is not expected to break any applications. In the future I'd like to implement a real API for fscrypt key revocation that interacts sanely with ongoing filesystem operations --- waiting for existing operations to complete and blocking new operations, and invalidating and sanitizing key material and plaintext from the VFS caches. But this is a hard problem, and for now this bug must be fixed. This bug affected almost all versions of ext4, f2fs, and ubifs encryption, and it was potentially reachable in any kernel configured with encryption support (CONFIG_EXT4_ENCRYPTION=y, CONFIG_EXT4_FS_ENCRYPTION=y, CONFIG_F2FS_FS_ENCRYPTION=y, or CONFIG_UBIFS_FS_ENCRYPTION=y). Note that older kernels did not use the shared fs/crypto/ code, but due to the potential security implications of this bug, it may still be worthwhile to backport this fix to them. Fixes: b7236e21 ("ext4 crypto: reorganize how we store keys in the inode") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Acked-by:
Michael Halcrow <mhalcrow@google.com> Signed-off-by:
-
Dave Martin authored
commit 7195ee31 upstream. It's not clear what behaviour is sensible when doing partial write of NT_METAG_RPIPE, so just don't bother. This patch assumes that userspace will never rely on a partial SETREGSET in this case, since it's not clear what should happen anyway. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dave Martin authored
commit 5fe81fe9 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill TXSTATUS, a well-defined default value is used, based on the task's current value. Suggested-by:
-
Dave Martin authored
commit a78ce80d upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
-
Dave Martin authored
commit d3805c54 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dave Martin authored
commit d614fd58 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
-
Dave Martin authored
commit 502585c7 upstream. regs_set() and regs_get() are vulnerable to an off-by-1 buffer overrun if CONFIG_CPU_H8S is set, since this adds an extra entry to register_offset[] but not to user_regs_struct. So, iterate over user_regs_struct based on its actual size, not based on the length of register_offset[]. Signed-off-by:
-
Dave Martin authored
commit fb411b83 upstream. gpr_set won't work correctly and can never have been tested, and the correct behaviour is not clear due to the endianness-dependent task layout. So, just remove it. The core code will now return -EOPNOTSUPPORT when trying to set NT_PRSTATUS on this architecture until/unless a correct implementation is supplied. Signed-off-by:
-
Bjorn Andersson authored
commit a6566710 upstream. Clearing the status bit on irq_unmask will discard any pending interrupt that did arrive after the irq_ack, i.e. while the IRQ handler function was executing. Fixes: f365be09 ("pinctrl: Add Qualcomm TLMM driver") Cc: Stephen Boyd <sboyd@codeaurora.org> Reported-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ladi Prosek authored
commit fc865322 upstream. When init_vqs runs, virtio_balloon.stats is either uninitialized or contains stale values. The host updates its state with garbage data because it has no way of knowing that this is just a marker buffer used for signaling. This patch updates the stats before pushing the initial buffer. Alternative fixes: * Push an empty buffer in init_vqs. Not easily done with the current virtio implementation and violates the spec "Driver MUST supply the same subset of statistics in all buffers submitted to the statsq". * Push a buffer with invalid tags in init_vqs. Violates the same spec clause, plus "invalid tag" is not really defined. Note: the spec says: When using the legacy interface, the device SHOULD ignore all values in the first buffer in the statsq supplied by the driver after device initialization. Note: Historically, drivers supplied an uninitialized buffer in the first buffer. Unfortunately QEMU does not seem to implement the recommendation even for the legacy interface. Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Andy Whitcroft authored
commit f843ee6d upstream. Kees Cook has pointed out that xfrm_replay_state_esn_len() is subject to wrapping issues. To ensure we are correctly ensuring that the two ESN structures are the same size compare both the overall size as reported by xfrm_replay_state_esn_len() and the internal length are the same. CVE-2017-7184 Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Andy Whitcroft authored
commit 677e806d upstream. When a new xfrm state is created during an XFRM_MSG_NEWSA call we validate the user supplied replay_esn to ensure that the size is valid and to ensure that the replay_window size is within the allocated buffer. However later it is possible to update this replay_esn via a XFRM_MSG_NEWAE call. There we again validate the size of the supplied buffer matches the existing state and if so inject the contents. We do not at this point check that the replay_window is within the allocated memory. This leads to out-of-bounds reads and writes triggered by netlink packets. This leads to memory corruption and the potential for priviledge escalation. We already attempt to validate the incoming replay information in xfrm_new_ae() via xfrm_replay_verify_len(). This confirms that the user is not trying to change the size of the replay state buffer which includes the replay_esn. It however does not check the replay_window remains within that buffer. Add validation of the contained replay_window. CVE-2017-7184 Signed-off-by:
-
Florian Westphal authored
commit c282222a upstream. Dmitry reports following splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 13059 Comm: syz-executor1 Not tainted 4.10.0-rc7-next-20170207 #1 [..] spin_lock_bh include/linux/spinlock.h:304 [inline] xfrm_policy_flush+0x32/0x470 net/xfrm/xfrm_policy.c:963 xfrm_policy_fini+0xbf/0x560 net/xfrm/xfrm_policy.c:3041 xfrm_net_init+0x79f/0x9e0 net/xfrm/xfrm_policy.c:3091 ops_init+0x10a/0x530 net/core/net_namespace.c:115 setup_net+0x2ed/0x690 net/core/net_namespace.c:291 copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396 create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] Problem is that when we get error during xfrm_net_init we will call xfrm_policy_fini which will acquire xfrm_policy_lock before it was initialized. Just move it around so locks get set up first. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 30 Mar, 2017 10 commits
-
-
Greg Kroah-Hartman authored
-
Jiri Slaby authored
commit 62071194 upstream. With this reproducer: struct sockaddr_alg alg = { .salg_family = 0x26, .salg_type = "hash", .salg_feat = 0xf, .salg_mask = 0x5, .salg_name = "digest_null", }; int sock, sock2; sock = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(sock, (struct sockaddr *)&alg, sizeof(alg)); sock2 = accept(sock, NULL, NULL); setsockopt(sock, SOL_ALG, ALG_SET_KEY, "\x9b\xca", 2); accept(sock2, NULL, NULL); ==== 8< ======== 8< ======== 8< ======== 8< ==== one can immediatelly see an UBSAN warning: UBSAN: Undefined behaviour in crypto/algif_hash.c:187:7 variable length array bound value 0 <= 0 CPU: 0 PID: 15949 Comm: syz-executor Tainted: G E 4.4.30-0-default #1 ... Call Trace: ... [<ffffffff81d598fd>] ? __ubsan_handle_vla_bound_not_positive+0x13d/0x188 [<ffffffff81d597c0>] ? __ubsan_handle_out_of_bounds+0x1bc/0x1bc [<ffffffffa0e2204d>] ? hash_accept+0x5bd/0x7d0 [algif_hash] [<ffffffffa0e2293f>] ? hash_accept_nokey+0x3f/0x51 [algif_hash] [<ffffffffa0e206b0>] ? hash_accept_parent_nokey+0x4a0/0x4a0 [algif_hash] [<ffffffff8235c42b>] ? SyS_accept+0x2b/0x40 It is a correct warning, as hash state is propagated to accept as zero, but creating a zero-length variable array is not allowed in C. Fix this as proposed by Herbert -- do "?: 1" on that site. No sizeof or similar happens in the code there, so we just allocate one byte even though we do not use the array. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> (maintainer:CRYPTO API) Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Takashi Iwai authored
commit 8aac7f34 upstream. fbcon can deal with vc_hi_font_mask (the upper 256 chars) and adjust the vc attrs dynamically when vc_hi_font_mask is changed at fbcon_init(). When the vc_hi_font_mask is set, it remaps the attrs in the existing console buffer with one bit shift up (for 9 bits), while it remaps with one bit shift down (for 8 bits) when the value is cleared. It works fine as long as the font gets updated after fbcon was initialized. However, we hit a bizarre problem when the console is switched to another fb driver (typically from vesafb or efifb to drmfb). At switching to the new fb driver, we temporarily rebind the console to the dummy console, then rebind to the new driver. During the switching, we leave the modified attrs as is. Thus, the new fbcon takes over the old buffer as if it were to contain 8 bits chars (although the attrs are still shifted for 9 bits), and effectively this results in the yellow color texts instead of the original white color, as found in the bugzilla entry below. An easy fix for this is to re-adjust the attrs before leaving the fbcon at con_deinit callback. Since the code to adjust the attrs is already present in the current fbcon code, in this patch, we simply factor out the relevant code, and call it from fbcon_deinit(). Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000619Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sumit Semwal authored
From: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> [ Upstream commit f209fa03 ] During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Sumit Semwal authored
From: Michael Pobega <mpobega@neverware.com> [ Upstream commit 708f5dcc ] The Dell Latitude 3350's ethernet card attempts to use a reserved IRQ (18), resulting in ACPI being unable to enable the ethernet. Adding it to acpi_rev_dmi_table[] helps to work around this problem. Signed-off-by:
Michael Pobega <mpobega@neverware.com> [ rjw: Changelog ] Signed-off-by:
-
Sumit Semwal authored
From: Alex Hung <alex.hung@canonical.com> [ Upstream commit 9523b9bf ] Precision 5520 and 3520 either hang at login and during suspend or reboot. It turns out that that adding them to acpi_rev_dmi_table[] helps to work around those issues. Signed-off-by:
Alex Hung <alex.hung@canonical.com> [ rjw: Changelog ] Signed-off-by:
-
Sumit Semwal authored
From: Henrik Ingo <henrik.ingo@avoinelama.fi> [ Upstream commit e950267a ] Some devices have invalid baSourceID references, causing uvc_scan_chain() to fail, but if we just take the entities we can find and put them together in the most sensible chain we can think of, turns out they do work anyway. Note: This heuristic assumes there is a single chain. At the time of writing, devices known to have such a broken chain are - Acer Integrated Camera (5986:055a) - Realtek rtl157a7 (0bda:57a7) Signed-off-by:
Henrik Ingo <henrik.ingo@avoinelama.fi> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Sumit Semwal authored
From: Harald Freudenberger <freude@linux.vnet.ibm.com> [ Upstream commit b3e8652b ] Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Sumit Semwal authored
From: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> [ Upstream commit 25cdb645 ] The WRITE_SAME commands are not present in the blk_default_cmd_filter write_ok list, and thus are failed with -EPERM when the SG_IO ioctl() is executed without CAP_SYS_RAWIO capability (e.g., unprivileged users). [ sg_io() -> blk_fill_sghdr_rq() > blk_verify_command() -> -EPERM ] The problem can be reproduced with the sg_write_same command # sg_write_same --num 1 --xferlen 512 /dev/sda # # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_same --num 1 --xferlen 512 /dev/sda' Write same: pass through os error: Operation not permitted # For comparison, the WRITE_VERIFY command does not observe this problem, since it is in that list: # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_verify --num 1 --ilen 512 --lba 0 /dev/sda' # So, this patch adds the WRITE_SAME commands to the list, in order for the SG_IO ioctl to finish successfully: # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_same --num 1 --xferlen 512 /dev/sda' # That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices (qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]), which employs the SG_IO ioctl() and runs as an unprivileged user (libvirt-qemu). In that scenario, when a filesystem (e.g., ext4) performs its zero-out calls, which are translated to write-same calls in the guest kernel, and then into SG_IO ioctls to the host kernel, SCSI I/O errors may be observed in the guest: [...] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [...] sd 0:0:0:0: [sda] tag#0 Sense Key : Aborted Command [current] [...] sd 0:0:0:0: [sda] tag#0 Add. Sense: I/O process terminated [...] sd 0:0:0:0: [sda] tag#0 CDB: Write Same(10) 41 00 01 04 e0 78 00 00 08 00 [...] blk_update_request: I/O error, dev sda, sector 17096824 Links: [1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52 [2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device') Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Brahadambal Srinivasan <latha@linux.vnet.ibm.com> Reported-by:
Manjunatha H R <manjuhr1@in.ibm.com> Reviewed-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Sumit Semwal authored
From: Alexey Kardashevskiy <aik@ozlabs.ru> [ Upstream commit 39701e56 ] The iommu_table struct manages a hardware TCE table and a vmalloc'd table with corresponding userspace addresses. Both are allocated when the default DMA window is created and this happens when the very first group is attached to a container. As we are going to allow the userspace to configure container in one memory context and pas container fd to another, we have to postpones such allocations till a container fd is passed to the destination user process so we would account locked memory limit against the actual container user constrainsts. This postpones the it_userspace array allocation till it is used first time for mapping. The unmapping patch already checks if the array is allocated. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Acked-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
