Update error flags with regulation out if regulator is on & power
good status bit is set
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20221117184022.1808508-1-Naresh.Solanki@9elements.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Boards such as
* ProArt B550-CREATOR
* ProArt Z490-CREATOR 10G
* ROG CROSSHAIR VIII EXTREME
* ROG CROSSHAIR VIII HERO (WI-FI)
* TUF GAMING B550M-E
* TUF GAMING B550M-E (WI-FI)
* TUF GAMING B550M-PLUS WIFI II
have got a nct6775 chip, but by default there's no use of it
because of resource conflict with WMI method.

This commit adds such boards to the WMI monitoring list.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Reported-by: yutesdb <mundanedefoliation@gmail.com>
Tested-by: yutesdb <mundanedefoliation@gmail.com>
Link: https://lore.kernel.org/r/20221114214456.3891-1-pauk.denis@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET can be changed at
runtime when the Intel SST-PP (Intel Speed Select Technology -
Performance Profile) level is changed. As a result, the ttarget value
also becomes dyamic.

Improve the code to always get updated ttarget value.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221113153145.32696-4-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET can be changed at
runtime when the Intel SST-PP (Intel Speed Select Technology -
Performance Profile) level is changed.

Improve the code to always use updated tjmax when it can be retrieved
from MSR_IA32_TEMPERATURE_TARGET.

When tjmax can not be retrieved from MSR_IA32_TEMPERATURE_TARGET, still
follow the previous logic and always use a static tjmax value.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221113153145.32696-3-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Rearrange the tjmax handling code so that it can be used directly in
the sysfs attribute callbacks without forward declarations.

No functional change in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221113153145.32696-2-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

<linux/hwmon-vid.h> is not needed for these drivers. Remove the
corresponding #include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/41610f64a69bd0245ebc811fcff10ee54e93ac46.1668330765.git.christophe.jaillet@wanadoo.frSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Checking for the valid bit of IA32_THERM_STATUS is removed in commit
bf6ea084 ("hwmon: (coretemp) Do not return -EAGAIN for low
temperatures"), and temp_data->valid is set and never cleared when the
temperature has been read once.

Remove the obsolete temp_data->valid field.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221108075051.5139-2-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Sensors driver for OXP Handhelds from One-Netbook that expose fan reading
and control via hwmon sysfs.

As far as I could gather all OXP boards have the same DMI strings and
they can be told appart only by the boot cpu vendor (Intel/AMD).
Currently only AMD boards are supported since Intel have different EC
registers and values to read/write.

Fan control is provided via pwm interface in the range [0-255]. AMD
boards have [0-100] as range in the EC, the written value is scaled to
accommodate for that.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20221104140659.593608-1-samsagax@gmail.com
[groeck: Removed misleading comment about module_platform_driver()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Reorganize macro definitions into sections for each supported
device, with additional comments on their purpose. This should
make it easier to follow what report each offset is coming
from. Also, reformat per-device initializations in
aqc_probe() to organize them into sections (fan info,
temp sensors, other parameters and lastly labels).

No functional changes.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20221107142455.655998-1-savicaleksa83@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add in DMI matching table to match various board quirks and settings.
This will be useful for future extentions, but will start with the
existing definition of the Shuttle SN68PT.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20221105232531.1619387-1-frank@crawford.emu.id.auSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The kstrto<something>() functions have been moved from kernel.h to
kstrtox.h.

So, include the latter directly in the appropriate files.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/51688cf50bda44e2731381a31287c62319388783.1667763218.git.christophe.jaillet@wanadoo.frSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Improve documentation grammar and formatting for the
Ampere(R)'s Altra(R) SMpro hwmon driver.

Thanks Bagas for the changes in the link below.

Link: https://lore.kernel.org/lkml/Y1aHiaZ1OpHZIzS9@google.com/T/#mfea2167b99384486a1b75d9304536015116c1821Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20221102062103.3135417-1-quan@os.amperecomputing.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Use BIT() and GENMASK() macros for defining the bitfields inside the
registers. Also use FIELD_GET() and FIELD_PREP() where appropriate. This
makes the coding style within the driver consistent. No functional
changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for LTC7132.
The relevant registers in the LTC7132 are identical to the LTC7880.
So it's just a matter of adding the chip id.
Signed-off-by: Felix Nieuwenhuizen <Felix.Nieuwenhuizen@etas.com>
Link: https://lore.kernel.org/r/20221027145135.31802-1-Felix.Nieuwenhuizen@etas.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Clang warns:

  drivers/hwmon/smpro-hwmon.c:378:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
          default:
          ^
  drivers/hwmon/smpro-hwmon.c:378:2: note: insert 'break;' to avoid fall-through
          default:
          ^
          break;
  1 error generated.

Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return.

Add the missing break to silence the warning. Additionally, adjust the
indentation of a break and add a default case to the inner switch
statement.

Fixes: a87456864cbb ("hwmon: Add Ampere's Altra smpro-hwmon driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1751Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221027231611.3824800-1-nathan@kernel.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add the missing unlock before return from function jc42_write()
in the error handling case.

Fixes: 37dedaee8bc6 ("hwmon: (jc42) Convert register access and caching to regmap/regcache")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221027062931.598247-1-yangyingliang@huawei.comReported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The JC42 compatible thermal sensor on Kingston KSM32ES8/16ME DIMMs
(using Micron E-Die) is an ST Microelectronics STTS2004 (manufacturer
0x104a, device 0x2201). It does not keep the previously programmed
minimum, maximum and critical temperatures after system suspend and
resume (which is a shutdown / startup cycle for the JC42 temperature
sensor). This results in an alarm on system resume because the hardware
default for these values is 0°C (so any environment temperature greater
than 0°C will trigger the alarm).

Example before system suspend:
  jc42-i2c-0-1a
  Adapter: SMBus PIIX4 adapter port 0 at 0b00
  temp1:        +34.8°C  (low  =  +0.0°C)
                         (high = +85.0°C, hyst = +85.0°C)
                         (crit = +95.0°C, hyst = +95.0°C)

Example after system resume (without this change):
  jc42-i2c-0-1a
  Adapter: SMBus PIIX4 adapter port 0 at 0b00
  temp1:        +34.8°C  (low  =  +0.0°C)             ALARM (HIGH, CRIT)
                         (high =  +0.0°C, hyst =  +0.0°C)
                         (crit =  +0.0°C, hyst =  +0.0°C)

Apply the cached values from the JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER, JC42_REG_TEMP_CRITICAL and JC42_REG_SMBUS (where
the SMBUS register is not related to this issue but a side-effect of
using regcache_sync() during system resume with the previously
cached/programmed values. This fixes the alarm due to the hardware
defaults of 0°C because the previously applied limits (set by userspace)
are re-applied on system resume.

Fixes: 175c490c ("hwmon: (jc42) Add support for STTS2004 and AT30TSE004")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-3-martin.blumenstingl@googlemail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Switch the jc42 driver to use an I2C regmap to access the registers.
Also move over to regmap's built-in caching instead of adding a
custom caching implementation. This works for JC42_REG_TEMP_UPPER,
JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never
change except when explicitly written. The cache For JC42_REG_TEMP is
dropped (regmap can't cache it because it's volatile, meaning it can
change at any time) as well for simplicity and consistency with other
drivers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221023213157.11078-2-martin.blumenstingl@googlemail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for reading and writing temperature sensor offsets
on the Aquacomputer D5 Next, Farbwerk 360, Octo and Quadro,
for which the needed offsets are known. Implemented by
Leonard Anderweit [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/22

Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20221024151039.7222-1-savicaleksa83@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Commit c112d758 ("hwmon: OCC drivers are ARM-only") made the OCC
sensor drivers not selectable on powerpc64:

  These drivers are for a BMC inside PowerPC servers. The BMC runs on
  ARM hardware, so only propose the drivers on this architecture, unless
  build-testing.

... but we now have a powerpc64 BMC (still for a powerpc64 host), so
drop the `depends on` that excludes building for this platform.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221024081527.3842565-1-jk@codeconstruct.com.auSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add documentation for the Ampere(R)'s Altra(R) SMpro hwmon driver.
Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220929094321.770125-3-quan@os.amperecomputing.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This commit adds support for Ampere SMpro hwmon driver. This driver
supports accessing various CPU sensors provided by the SMpro co-processor
including temperature, power, voltages, and current.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220929094321.770125-2-quan@os.amperecomputing.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/7773541795f280db31dd981ffc21df8a630b794a.1666357434.git.mazziesaccount@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable().
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/a1fa4364cbb775de25478117dd22dda0742089e3.1666357434.git.mazziesaccount@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.

This is part of an ongoing transition to single-argument i2c probe
functions. Old-style probe functions involve a call to i2c_match_id:
in drivers/i2c/i2c-core-base.c,

         /*
          * When there are no more users of probe(),
          * rename probe_new to probe.
          */
         if (driver->probe_new)
                 status = driver->probe_new(client);
         else if (driver->probe)
                 status = driver->probe(client,
                                        i2c_match_id(driver->id_table, client));
         else
                 status = -EINVAL;

Drivers which don't need the second parameter can be declared using
probe_new instead, avoiding the call to i2c_match_id. Drivers which do
can still be converted to probe_new-style, calling i2c_match_id
themselves (as is done currently for of_match_id).

This change was done using the following Coccinelle script, and fixed
up for whitespace changes:

@ rule1 @
identifier fn;
identifier client, id;
@@

- static int fn(struct i2c_client *client, const struct i2c_device_id *id)
+ static int fn(struct i2c_client *client)
{
...when != id
}

@ rule2 depends on rule1 @
identifier rule1.fn;
identifier driver;
@@

struct i2c_driver driver = {
-       .probe
+       .probe_new
                =
(
                   fn
|
-                  &fn
+                  fn
)
                ,
};
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20221011143309.3141267-1-steve@sk2.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Check there is a chip before using force_id parameter as there
is no value in registering a non-existent chip
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20221004210100.540120-3-ahmad@khalifa.wsSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add parameter to ignore ACPI resource conflicts as an alternate to using
'acpi_enforce_resources=lax'.

Some BIOSes reserve resources and don't use them and the system wide
parameter may result in failures to certain drivers.
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20221004210100.540120-2-ahmad@khalifa.wsSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Don't populate the read-only const arrays names and watchdog_minors
on the stack but instead make them static const. Also makes the
object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221005152752.318493-1-colin.i.king@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This reverts commit f35b5d7d.

It has been reported to cause huge performance regressions on some loads
(will-it-scale.per_process_ops, but also building the kernel with
clang).

The commit did speed up gcc builds by a small amount, so it's not an
unambiguous regression, but until the big regressions are understood,
let's revert it.
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210181535.7144dd15-yujie.liu@intel.comReported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/Y1DNQaoPWxE%2BrGce@dev-arch.thelio-3990X/
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently tpm transactions are executed unconditionally in
tpm_pm_suspend() function, which may lead to races with other tpm
accessors in the system.

Specifically, the hw_random tpm driver makes use of tpm_get_random(),
and this function is called in a loop from a kthread, which means it's
not frozen alongside userspace, and so can race with the work done
during system suspend:

  tpm tpm0: tpm_transmit: tpm_recv: error -52
  tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics
  CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
  Call Trace:
   tpm_tis_status.cold+0x19/0x20
   tpm_transmit+0x13b/0x390
   tpm_transmit_cmd+0x20/0x80
   tpm1_pm_suspend+0xa6/0x110
   tpm_pm_suspend+0x53/0x80
   __pnp_bus_suspend+0x35/0xe0
   __device_suspend+0x10f/0x350

Fix this by calling tpm_try_get_ops(), which itself is a wrapper around
tpm_chip_start(), but takes the appropriate mutex.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/
Cc: stable@vger.kernel.org
Fixes: e891db1a ("tpm: turn on TPM on suspend for TPM 1.x")
[Jason: reworked commit message, added metadata]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fix from Borislav Petkov:

 - Fix a use-after-free case where the perf pending task callback would
   see an already freed event

* tag 'perf_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_pending_task() UaF

Pull timer fix from Borislav Petkov:

 - Revert a fix to RISC-V timers supposed to address an uncertainty
   whether clock events are received during S3 or not which locks up
   other RISC-V platforms. The issue will be fixed differently later.

* tag 'timers_urgent_for_v6.1_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "clocksource/drivers/riscv: Events are stopped during CPU suspend"

Pull powerpc fixes from Michael Ellerman:

 - Fix oops in 32-bit BPF tail call tests

 - Add missing declaration for machine_check_early_boot()

Thanks to Christophe Leroy and Naveen N. Rao.

* tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Add missing declaration for machine_check_early_boot()
  powerpc/bpf/32: Fix Oops on tail call tests

Pull input fix from Dmitry Torokhov:

 - a fix for Raydium touchscreen driver to stop leaking memory when
   sending commands to the chip

* tag 'input-for-v6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()

Pull i2c fixes from Wolfram Sang:
 "A power state fix in the core for ACPI devices, a regression fix
  regarding bus recovery for the cadence driver, a DMA handling fix for
  the imx driver, and two error path fixes (npcm7xx and qcom-geni)"

* tag 'i2c-for-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set
  i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer
  i2c: cadence: Fix regression with bus recovery
  i2c: Restore initial power state if probe fails
  i2c: npcm7xx: Fix error handling in npcm_i2c_init()

Pull dax fixes from Dan Williams:
 "A few bug fixes around the handling of "Soft Reserved" memory and
  memory tiering information.

  Linux is starting to enounter more real world systems that deploy an
  ACPI HMAT to describe different performance classes of memory, as well
  the "special purpose" (Linux "Soft Reserved") designation from EFI.

  These fixes result from that testing.

  It has all appeared in -next for a while with no known issues.

   - Fix duplicate overlapping device-dax instances for HMAT described
     "Soft Reserved" Memory

   - Fix missing node targets in the sysfs representation of memory
     tiers

   - Remove a confusing variable initialization"

* tag 'dax-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: Fix duplicate 'hmem' device registration
  ACPI: HMAT: Fix initiator registration for single-initiator systems
  ACPI: HMAT: remove unnecessary variable initialization

Pull block fixes from Jens Axboe:
 "Just a small NVMe merge for this week, fixing protection of the name
  space list, and a missing clear of a reserved field when unused"

* tag 'block-6.1-2022-12-02' of git://git.kernel.dk/linux:
  nvme: fix SRCU protection of nvme_ns_head list
  nvme-pci: clear the prp2 field when not used

Pull pin control fixes from Linus Walleij:
 "Three driver fixes. The Intel fix looks like the most important.

   - Fix a potential divide by zero in pinctrl-singe (OMAP and
     HiSilicon)

   - Disable IRQs on startup in the Mediatek driver. This is a classic,
     we should be looking out for this more.

   - Save and restore pins in 'direct IRQ' mode in the Intel driver,
     this works around firmware bugs"

* tag 'pinctrl-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: intel: Save and restore pins in "direct IRQ" mode
  pinctrl: meditatek: Startup with the IRQs disabled
  pinctrl: single: Fix potential division by zero

Pull RISC-V fixes from Palmer Dabbelt:

 - build fix for the NR_CPUS Kconfig SBI version dependency

 - fixes to early memory initialization, to fix page permissions in EFI
   and post-initmem-free

 - build fix for the VDSO, to avoid trying to profile the VDSO functions

 - fixes for kexec crash handling, to fix multi-core and interrupt
   related initialization inside the crash kernel

 - fix for a race condition when handling multiple concurrect kernel
   stack overflows

* tag 'riscv-for-linus-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Fixup crash_smp_send_stop without multi cores
  riscv: kexec: Fixup irq controller broken in kexec crash path
  riscv: mm: Proper page permissions after initmem free
  riscv: vdso: fix section overlapping under some conditions
  riscv: fix race when vmap stack overflow
  riscv: Sync efi page table's kernel mappings before switching
  riscv: Fix NR_CPUS range conditions