- 11 Jul, 2015 10 commits
-
-
Suresh Reddy authored
When the adapter is in error state, return error from be_mcc_notify() so that the caller routines need not sleep waiting for a response. Signed-off-by:
Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by:
Sathya Perla <sathya.perla@avagotech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Venkat Duvvuru authored
The "dest" field in the UDP-hdr of a TX skb is in network endian format. Convert it to host endian before accessing it. The os2bmc patch, mentioned below introduced this code. Fixes: 760c295e ("be2net: Support for OS2BMC") Signed-off-by:
Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by:
-
Vasundhara Volam authored
In the commit a6e6ff6e ("be2net: simplify UFI compatibility checking"), a return value of "-1" was incorrectly used in place of "false". This patch fixes it. Fixes: a6e6ff6e ("be2net: simplify UFI compatibility checking") Signed-off-by:
Vasundhara Volam <vasundhara.volam@avagotech.com> Signed-off-by:
-
Kalesh Purayil authored
pci_enable_device() call sets device power state to D0; there is no need doing it again. Signed-off-by:
Kalesh AP <kalesh.purayil@avagotech.com> Signed-off-by:
-
Kalesh Purayil authored
The current code assumes that bridge functionality (EVB) in the adapter is enabled only when SR-IOV is enabled. This is not always true. This patch uses the GET_HSW_CONFIG FW cmd to query this from the FW. Signed-off-by:
-
Kalesh Purayil authored
This change will make be_setup_wol() routine more compact and readable by removing some duplicate code. Signed-off-by:
-
YOSHIFUJI Hideaki/吉藤英明 authored
If outgoing interface is specified and the candidate address is restricted to the outgoing interface, it is enough to iterate over that given interface only. Signed-off-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Acked-by:
Erik Kline <ek@google.com> Signed-off-by:
-
Krzysztof Kozlowski authored
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
David Thomson authored
Support manually setting the polarity to mdi or mdix Signed-off-by:
David Thomson <david.thomson@alliedtelesis.co.nz> Signed-off-by:
-
David Thomson authored
Pass the mdix setting from ethtool down to the phy driver, to allow driver specific implementations of manually setting the polarity. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 10 Jul, 2015 4 commits
-
-
Eric Dumazet authored
After commit 900f65d3 ("tcp: move duplicate code from tcp_v4_init_sock()/tcp_v6_init_sock()"), we no longer need to export tcp_init_xmit_timers() Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Fill also the port group state when sending notifications. Signed-off-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Masatake YAMATO authored
flags local variable in __mkroute_input is not used as a variable. Signed-off-by:
Masatake YAMATO <yamato@redhat.com> Signed-off-by:
-
Tom Herbert authored
Add support to allow non-local binds similar to how this was done for IPv4. Non-local binds are very useful in emulating the Internet in a box, etc. This add the ip_nonlocal_bind sysctl under ipv6. Testing: Set up nonlocal binding and receive routing on a host, e.g.: ip -6 rule add from ::/0 iif eth0 lookup 200 ip -6 route add local 2001:0:0:1::/64 dev lo proto kernel scope host table 200 sysctl -w net.ipv6.ip_nonlocal_bind=1 Set up routing to 2001:0:0:1::/64 on peer to go to first host ping6 -I 2001:0:0:1::1 peer-address -- to verify Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
- 09 Jul, 2015 15 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== inet: timewait cleanups Another round of patches to make tw handling simpler. ==================== Signed-off-by: -
Eric Dumazet authored
inet_twsk_deschedule() calls are followed by inet_twsk_put(). Only particular case is in inet_twsk_purge() but there is no point to defer the inet_twsk_put() after re-enabling BH. Lets rename inet_twsk_deschedule() to inet_twsk_deschedule_put() and move the inet_twsk_put() inside. Signed-off-by:
-
Eric Dumazet authored
timewait sockets have a complex refcounting logic. Once we realize it should be similar to established and syn_recv sockets, we can use sk_nulls_del_node_init_rcu() and remove inet_twsk_unhash() In particular, deferred inet_twsk_put() added in commit 13475a30 ("tcp: connect() race with timewait reuse") looks unecessary : When removing a timewait socket from ehash or bhash, caller must own a reference on the socket anyway. Signed-off-by:
-
Eric Dumazet authored
Kernel will crash the same if one of the pointer is NULL anyway. Signed-off-by:
-
Florian Westphal authored
Hop was always either 0 or sizeof(struct ipv6hdr). Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Aleksey S. Kazantsev authored
MV88E6320 and MV88E6321 are largely compatible to MV886352, but are members of a different chip family. Signed-off-by:
Aleksey S. Kazantsev <ioctl@yandex.ru> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Yuchung Cheng says: ==================== tcp: fixes some congestion control corner cases This patch series fixes corner cases of TCP congestion control. First issue is to avoid continuing slow start when cwnd reaches ssthresh. Second issue is incorrectly processing order of congestion state and cwnd update when entering fast recovery or undoing cwnd. ==================== Signed-off-by: -
Yuchung Cheng authored
The congestion state and cwnd can be updated in the wrong order. For example, upon receiving a dubious ACK, we incorrectly raise the cwnd first (tcp_may_raise_cwnd()/tcp_cong_avoid()) because the state is still Open, then enter recovery state to reduce cwnd. For another example, if the ACK indicates spurious timeout or retransmits, we first revert the cwnd reduction and congestion state back to Open state. But we don't raise the cwnd even though the ACK does not indicate any congestion. To fix this problem we should first call tcp_fastretrans_alert() to process the dubious ACK and update the congestion state, then call tcp_may_raise_cwnd() that raises cwnd based on the current state. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Nandita Dukkipati <nanditad@google.com> Signed-off-by:
-
Yuchung Cheng authored
In the original design slow start is only used to raise cwnd when cwnd is stricly below ssthresh. It makes little sense to slow start when cwnd == ssthresh: especially when hystart has set ssthresh in the initial ramp, or after recovery when cwnd resets to ssthresh. Not doing so will also help reduce the buffer bloat slightly. Signed-off-by:
-
Yuchung Cheng authored
Add a helper to test the slow start condition in various congestion control modules and other places. This is to prepare a slight improvement in policy as to exactly when to slow start. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that the call skb_defer_rx_timestamp will first check for a phydev before going in and manipulating the skb->data and skb->len values. By doing this we can avoid unnecessary work on network devices that don't support phydev. As a result we reduce the total instruction count needed to process this on most devices. Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Jon Maxwell authored
V1 of this patch contains Eric Dumazet's suggestion to move the per dst RTAX_QUICKACK check into tcp_in_quickack_mode(). Thanks Eric. I ran some tests and after setting the "ip route change quickack 1" knob there were still many delayed ACKs sent. This occured because when icsk_ack.quick=0 the !icsk_ack.pingpong value is subsequently ignored as tcp_in_quickack_mode() checks both these values. The condition for a quick ack to trigger requires that both icsk_ack.quick != 0 and icsk_ack.pingpong=0. Currently only icsk_ack.pingpong is controlled by the knob. But the icsk_ack.quick value changes dynamically depending on heuristics. The crux of the matter is that delayed acks still cannot be entirely disabled even with the RTAX_QUICKACK per dst knob enabled. This patch ensures that a quick ack is always sent when the RTAX_QUICKACK per dst knob is turned on. The "ip route change quickack 1" knob was recently added to enable quickacks. It was modeled around the TCP_QUICKACK setsockopt() option. This issue is that even with "ip route change quickack 1" enabled we still see delayed ACKs under some conditions. It would be nice to be able to completely disable delayed ACKs. Here is an example: # netstat -s|grep dela 3 delayed acks sent For all routes enable the knob # ip route change quickack 1 Generate some traffic across a slow link and we still see the delayed acks. # netstat -s|grep dela 106 delayed acks sent 1 delayed acks further delayed because of locked socket The issue is that both the "ip route change quickack 1" knob and the TCP_QUICKACK option set the icsk_ack.pingpong variable to 0. However at the business end in the __tcp_ack_snd_check() routine, tcp_in_quickack_mode() checks that both icsk_ack.quick != 0 and icsk_ack.pingpong=0 in order to trigger a quickack. As icsk_ack.quick is determined by heuristics it can be 0. When that occurs the icsk_ack.pingpong value is ignored and a delayed ACK is sent regardless. This patch moves the RTAX_QUICKACK per dst check into the tcp_in_quickack_mode() routine which ensures that a quickack is always sent when the quickack knob is enabled for that dst. Signed-off-by:Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
-
Scott Feldman authored
Implement ndo_change_mtu: on MTU change, reallocate Rx ring bufs and signal HW of new port MTU value. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Tested-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Vaishali Thakkar authored
Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @A@ identifier f, x; @@ -static f(...) { return pci_register_driver(&x); } @b depends on a@ identifier e, a.x; statement S; @@ -static e(...) { -pci_unregister_driver(&x); -DBG_PRINT(INIT_DBG,"S"); - } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_pci_driver; @@ -module_exit(e); +module_pci_driver(x); Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by:
-
Hariprasad Shenai authored
If we don't have access to the new User GTS (T5+), use the old doorbell mechanism; otherwise use the new BAR2 mechanism. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
- 08 Jul, 2015 11 commits
-
-
Xi Wang authored
Currently "ALU_END_FROM_BE 32" and "ALU_END_FROM_LE 32" do not test if the upper bits of the result are zeros (the arm64 JIT had such bugs). Extend the two tests to catch this. Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Cleanup, T6 changes and register range update This patch series adds the following: Don't use entire L2T table, update register ranges for T6 adapter, read stats for only available channels for T6 and enable cim_la dump for T6 adapter also. This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Updating the driver to read the stats of only available channels. T6 and later has only 2 channels Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
The driver was retrieving the parameters for the bounds of its slice of the L2T from the firmware and then throwing those away and using the entire table. This corrects that problem. Signed-off-by:
-
Vaishali Thakkar authored
Use module_pci_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @A@ identifier f, x; @@ -static f(...) { return pci_register_driver(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { pci_unregister_driver(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_pci_driver; @@ -module_exit(e); +module_pci_driver(x); Signed-off-by:
-
Haiyang Zhang authored
When packet encapsulation is in use, the MTU needs to be reduced for headroom reservation. The existing code takes the updated MTU value only from the host side. But vSwitch extensions, such as Open vSwitch, require the flexibility to change the MTU to different values from within a guest during the lifecycle of a vNIC, when the encapsulation protocol is changed. The patch supports this kind of MTU changes. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Eric Dumazet authored
Add multiqueue capabilities to ifb netdevice. This removes last bottleneck for ingress when mq qdisc can be used to shard load from multiple RX queues on physical device. Tested: # netem based setup, installed at receiver side ETH=eth0 IFB=ifb10 EST="est 1sec 4sec" # Optional rate estimator RTT_HALF=2ms #REORDER=20us #LOSS="loss 1" TXQ=8 ip link add ifb10 numtxqueues $TXQ type ifb ip link set dev $IFB up tc qdisc add dev $ETH ingress 2>/dev/null tc filter add dev $ETH parent ffff: \ protocol ip u32 match u32 0 0 flowid 1:1 \ action mirred egress redirect dev $IFB tc qdisc del dev $IFB root 2>/dev/null tc qdisc add dev $IFB root handle 1: mq for i in `seq 1 $TXQ` do slot=$( printf %x $(( i )) ) tc qd add dev $IFB parent 1:$slot $EST netem \ limit 100000 delay $RTT_HALF $REORDER $LOSS done lpaa24:~# tc -s -d qd sh dev ifb10 qdisc mq 1: root Sent 316544766 bytes 5265927 pkt (dropped 0, overlimits 0 requeues 0) backlog 98880b 1648p requeues 0 qdisc netem 8002: parent 1:1 limit 100000 delay 2.0ms Sent 39601416 bytes 658721 pkt (dropped 0, overlimits 0 requeues 0) rate 38235Kbit 79657pps backlog 12240b 204p requeues 0 qdisc netem 8003: parent 1:2 limit 100000 delay 2.0ms Sent 39472866 bytes 657227 pkt (dropped 0, overlimits 0 requeues 0) rate 38234Kbit 79655pps backlog 10620b 176p requeues 0 qdisc netem 8004: parent 1:3 limit 100000 delay 2.0ms Sent 39703417 bytes 659699 pkt (dropped 0, overlimits 0 requeues 0) rate 38320Kbit 79831pps backlog 12780b 213p requeues 0 qdisc netem 8005: parent 1:4 limit 100000 delay 2.0ms Sent 39565149 bytes 658011 pkt (dropped 0, overlimits 0 requeues 0) rate 38174Kbit 79530pps backlog 11880b 198p requeues 0 qdisc netem 8006: parent 1:5 limit 100000 delay 2.0ms Sent 39506078 bytes 657354 pkt (dropped 0, overlimits 0 requeues 0) rate 38195Kbit 79571pps backlog 12480b 208p requeues 0 qdisc netem 8007: parent 1:6 limit 100000 delay 2.0ms Sent 39675994 bytes 658849 pkt (dropped 0, overlimits 0 requeues 0) rate 38323Kbit 79838pps backlog 12600b 210p requeues 0 qdisc netem 8008: parent 1:7 limit 100000 delay 2.0ms Sent 39532042 bytes 658367 pkt (dropped 0, overlimits 0 requeues 0) rate 38177Kbit 79536pps backlog 13140b 219p requeues 0 qdisc netem 8009: parent 1:8 limit 100000 delay 2.0ms Sent 39488164 bytes 657705 pkt (dropped 0, overlimits 0 requeues 0) rate 38192Kbit 79568pps backlog 13Kb 222p requeues 0 Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Carol Soto authored
Add extra check for total vfs for SRIOV to check if that value is bigger than total vfs in pci SRIOV capabalities. Fix a check and print of the number of maximum vfs that hw can handle. Fix a check and print of the number of maximum vfs per port that driver can handle. Signed-off-by:
Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
-
