- 13 Dec, 2012 38 commits
-
-
David Rientjes authored
To lock the entire system from parallel oom killing, it's possible to pass in a zonelist with all zones rather than using for_each_populated_zone() for the iteration. This obsoletes try_set_system_oom() and clear_system_oom() so that they can be removed. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lai Jiangshan authored
Now, memory management can handle movable node or nodes which don't have any normal memory, so we can dynamic configure and add movable node by: online a ZONE_MOVABLE memory from a previous offline node offline the last normal memory which result a non-normal-memory-node movable-node is very important for power-saving, hardware partitioning and high-available-system(hardware fault management). Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
Wen Congyang <wency@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Lai Jiangshan authored
We need a node which only contains movable memory. This feature is very important for node hotplug. If a node has normal/highmem, the memory may be used by the kernel and can't be offlined. If the node only contains movable memory, we can offline the memory and the node. All are prepared, we can actually introduce N_MEMORY. add CONFIG_MOVABLE_NODE make we can use it for movable-dedicated node [akpm@linux-foundation.org: fix Kconfig text] Signed-off-by:
-
David Rientjes authored
While profiling numa/core v16 with cgroup_disable=memory on the command line, I noticed mem_cgroup_count_vm_event() still showed up as high as 0.60% in perftop. This occurs because the function is called extremely often even when memcg is disabled. To fix this, inline the check for mem_cgroup_disabled() so we avoid the unnecessary function call if memcg is disabled. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Glauber Costa <glommer@parallels.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Andrew Morton authored
Cc: Glauber Costa <glommer@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Joonsoo Kim authored
During reviewing the source code, I found a comment which mention that after f_op->mmap(), vma's start address can be changed. I didn't verify that it is really possible, because there are so many f_op->mmap() implementation. But if there are some mmap() which change vma's start address, it is possible error situation, because we already prepare prev vma, rb_link and rb_parent and these are related to original address. So add WARN_ON_ONCE for finding that this situtation really happens. Signed-off-by:
Joonsoo Kim <js1304@gmail.com> Signed-off-by:
-
Greg Thelen authored
Since commit 628f4235 ("memcg: limit change shrink usage") both res_counter_write() and write_strategy_fn have been unused. This patch deletes them both. Signed-off-by:
Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Tejun Heo <tj@kernel.org> Acked-by:
-
Lai Jiangshan authored
Update nodemasks management for N_MEMORY. [lliubbo@gmail.com: fix build] Signed-off-by:
Bob Liu <lliubbo@gmail.com> Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Since we introduced N_MEMORY, we update the initialization of node_states. Signed-off-by:
Lin Feng <linfeng@cn.fujitsu.com> Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by:
-
Lai Jiangshan authored
We have N_NORMAL_MEMORY for standing for the nodes that have normal memory with zone_type <= ZONE_NORMAL. And we have N_HIGH_MEMORY for standing for the nodes that have normal or high memory. But we don't have any word to stand for the nodes that have *any* memory. And we have N_CPU but without N_MEMORY. Current code reuse the N_HIGH_MEMORY for this purpose because any node which has memory must have high memory or normal memory currently. A) But this reusing is bad for *readability*. Because the name N_HIGH_MEMORY just stands for high or normal: A.example 1) mem_cgroup_nr_lru_pages(): for_each_node_state(nid, N_HIGH_MEMORY) The user will be confused(why this function just counts for high or normal memory node? does it counts for ZONE_MOVABLE's lru pages?) until someone else tell them N_HIGH_MEMORY is reused to stand for nodes that have any memory. A.cont) If we introduce N_MEMORY, we can reduce this confusing AND make the code more clearly: A.example 2) mm/page_cgroup.c use N_HIGH_MEMORY twice: One is in page_cgroup_init(void): for_each_node_state(nid, N_HIGH_MEMORY) { It means if the node have memory, we will allocate page_cgroup map for the node. We should use N_MEMORY instead here to gaim more clearly. The second using is in alloc_page_cgroup(): if (node_state(nid, N_HIGH_MEMORY)) addr = vzalloc_node(size, nid); It means if the node has high or normal memory that can be allocated from kernel. We should keep N_HIGH_MEMORY here, and it will be better if the "any memory" semantic of N_HIGH_MEMORY is removed. B) This reusing is out-dated if we introduce MOVABLE-dedicated node. The MOVABLE-dedicated node should not appear in node_stats[N_HIGH_MEMORY] nor node_stats[N_NORMAL_MEMORY], because MOVABLE-dedicated node has no high or normal memory. In x86_64, N_HIGH_MEMORY=N_NORMAL_MEMORY, if a MOVABLE-dedicated node is in node_stats[N_HIGH_MEMORY], it is also means it is in node_stats[N_NORMAL_MEMORY], it causes SLUB wrong. The slub uses for_each_node_state(nid, N_NORMAL_MEMORY) and creates kmem_cache_node for MOVABLE-dedicated node and cause problem. In one word, we need a N_MEMORY. We just intrude it as an alias to N_HIGH_MEMORY and fix all im-proper usages of N_HIGH_MEMORY in late patches. Signed-off-by: -
Marek Szyprowski authored
__alloc_contig_migrate_range() should use all possible ways to get all the pages migrated from the given memory range, so pruning per-cpu lru lists for all CPUs is required, regadless the cost of such operation. Otherwise some pages which got stuck at per-cpu lru list might get missed by migration procedure causing the contiguous allocation to fail. Reported-by:
SeongHwan Yoon <sunghwan.yun@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Thierry Reding authored
compact_capture_page() is only used if compaction is enabled so it should be moved into the corresponding #ifdef. Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Kirill A. Shutemov authored
pmd value is stable only with mm->page_table_lock taken. After taking the lock we need to check that nobody modified the pmd before changing it. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Rientjes <rientjes@google.com> Reviewed-by:
-
Kirill A. Shutemov authored
By default kernel tries to use huge zero page on read page fault. It's possible to disable huge zero page by writing 0 or enable it back by writing 1: echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/use_zero_page echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/use_zero_page Signed-off-by:
-
Kirill A. Shutemov authored
hzp_alloc is incremented every time a huge zero page is successfully allocated. It includes allocations which where dropped due race with other allocation. Note, it doesn't count every map of the huge zero page, only its allocation. hzp_alloc_failed is incremented if kernel fails to allocate huge zero page and falls back to using small pages. Signed-off-by:
-
Kirill A. Shutemov authored
H. Peter Anvin doesn't like huge zero page which sticks in memory forever after the first allocation. Here's implementation of lockless refcounting for huge zero page. We have two basic primitives: {get,put}_huge_zero_page(). They manipulate reference counter. If counter is 0, get_huge_zero_page() allocates a new huge page and takes two references: one for caller and one for shrinker. We free the page only in shrinker callback if counter is 1 (only shrinker has the reference). put_huge_zero_page() only decrements counter. Counter is never zero in put_huge_zero_page() since shrinker holds on reference. Freeing huge zero page in shrinker callback helps to avoid frequent allocate-free. Refcounting has cost. On 4 socket machine I observe ~1% slowdown on parallel (40 processes) read page faulting comparing to lazy huge page allocation. I think it's pretty reasonable for synthetic benchmark. [lliubbo@gmail.com: fix mismerge] Signed-off-by: -
Kirill A. Shutemov authored
Instead of allocating huge zero page on hugepage_init() we can postpone it until first huge zero page map. It saves memory if THP is not in use. cmpxchg() is used to avoid race on huge_zero_pfn initialization. Signed-off-by:
-
Kirill A. Shutemov authored
All code paths seems covered. Now we can map huge zero page on read page fault. We setup it in do_huge_pmd_anonymous_page() if area around fault address is suitable for THP and we've got read page fault. If we fail to setup huge zero page (ENOMEM) we fallback to handle_pte_fault() as we normally do in THP. Signed-off-by:
-
Kirill A. Shutemov authored
We can't split huge zero page itself (and it's bug if we try), but we can split the pmd which points to it. On splitting the pmd we create a table with all ptes set to normal zero page. [akpm@linux-foundation.org: fix build error] Signed-off-by:
-
Kirill A. Shutemov authored
Pass vma instead of mm and add address parameter. In most cases we already have vma on the stack. We provides split_huge_page_pmd_mm() for few cases when we have mm, but not vma. This change is preparation to huge zero pmd splitting implementation. Signed-off-by:
-
Kirill A. Shutemov authored
mprotect core never tries to make page writable using change_huge_pmd(). Let's add an assert that the assumption is true. It's important to be sure we will not make huge zero page writable. Signed-off-by:
-
Kirill A. Shutemov authored
On write access to huge zero page we alloc a new huge page and clear it. If ENOMEM, graceful fallback: we create a new pmd table and set pte around fault address to newly allocated normal (4k) page. All other ptes in the pmd set to normal zero page. Signed-off-by:
-
Kirill A. Shutemov authored
It's easy to copy huge zero page. Just set destination pmd to huge zero page. It's safe to copy huge zero page since we have none yet :-p [rientjes@google.com: fix comment] Signed-off-by:
-
Kirill A. Shutemov authored
We don't have a mapped page to zap in huge zero page case. Let's just clear pmd and remove it from tlb. Signed-off-by:
-
Kirill A. Shutemov authored
During testing I noticed big (up to 2.5 times) memory consumption overhead on some workloads (e.g. ft.A from NPB) if THP is enabled. The main reason for that big difference is lacking zero page in THP case. We have to allocate a real page on read page fault. A program to demonstrate the issue: #include <assert.h> #include <stdlib.h> #include <unistd.h> #define MB 1024*1024 int main(int argc, char **argv) { char *p; int i; posix_memalign((void **)&p, 2 * MB, 200 * MB); for (i = 0; i < 200 * MB; i+= 4096) assert(p[i] == 0); pause(); return 0; } With thp-never RSS is about 400k, but with thp-always it's 200M. After the patcheset thp-always RSS is 400k too. Design overview. Huge zero page (hzp) is a non-movable huge page (2M on x86-64) filled with zeros. The way how we allocate it changes in the patchset: - [01/10] simplest way: hzp allocated on boot time in hugepage_init(); - [09/10] lazy allocation on first use; - [10/10] lockless refcounting + shrinker-reclaimable hzp; We setup it in do_huge_pmd_anonymous_page() if area around fault address is suitable for THP and we've got read page fault. If we fail to setup hzp (ENOMEM) we fallback to handle_pte_fault() as we normally do in THP. On wp fault to hzp we allocate real memory for the huge page and clear it. If ENOMEM, graceful fallback: we create a new pmd table and set pte around fault address to newly allocated normal (4k) page. All other ptes in the pmd set to normal zero page. We cannot split hzp (and it's bug if we try), but we can split the pmd which points to it. On splitting the pmd we create a table with all ptes set to normal zero page. === By hpa's request I've tried alternative approach for hzp implementation (see Virtual huge zero page patchset): pmd table with all entries set to zero page. This way should be more cache friendly, but it increases TLB pressure. The problem with virtual huge zero page: it requires per-arch enabling. We need a way to mark that pmd table has all ptes set to zero page. Some numbers to compare two implementations (on 4s Westmere-EX): Mirobenchmark1 ============== test: posix_memalign((void **)&p, 2 * MB, 8 * GB); for (i = 0; i < 100; i++) { assert(memcmp(p, p + 4*GB, 4*GB) == 0); asm volatile ("": : :"memory"); } hzp: Performance counter stats for './test_memcmp' (5 runs): 32356.272845 task-clock # 0.998 CPUs utilized ( +- 0.13% ) 40 context-switches # 0.001 K/sec ( +- 0.94% ) 0 CPU-migrations # 0.000 K/sec 4,218 page-faults # 0.130 K/sec ( +- 0.00% ) 76,712,481,765 cycles # 2.371 GHz ( +- 0.13% ) [83.31%] 36,279,577,636 stalled-cycles-frontend # 47.29% frontend cycles idle ( +- 0.28% ) [83.35%] 1,684,049,110 stalled-cycles-backend # 2.20% backend cycles idle ( +- 2.96% ) [66.67%] 134,355,715,816 instructions # 1.75 insns per cycle # 0.27 stalled cycles per insn ( +- 0.10% ) [83.35%] 13,526,169,702 branches # 418.039 M/sec ( +- 0.10% ) [83.31%] 1,058,230 branch-misses # 0.01% of all branches ( +- 0.91% ) [83.36%] 32.413866442 seconds time elapsed ( +- 0.13% ) vhzp: Performance counter stats for './test_memcmp' (5 runs): 30327.183829 task-clock # 0.998 CPUs utilized ( +- 0.13% ) 38 context-switches # 0.001 K/sec ( +- 1.53% ) 0 CPU-migrations # 0.000 K/sec 4,218 page-faults # 0.139 K/sec ( +- 0.01% ) 71,964,773,660 cycles # 2.373 GHz ( +- 0.13% ) [83.35%] 31,191,284,231 stalled-cycles-frontend # 43.34% frontend cycles idle ( +- 0.40% ) [83.32%] 773,484,474 stalled-cycles-backend # 1.07% backend cycles idle ( +- 6.61% ) [66.67%] 134,982,215,437 instructions # 1.88 insns per cycle # 0.23 stalled cycles per insn ( +- 0.11% ) [83.32%] 13,509,150,683 branches # 445.447 M/sec ( +- 0.11% ) [83.34%] 1,017,667 branch-misses # 0.01% of all branches ( +- 1.07% ) [83.32%] 30.381324695 seconds time elapsed ( +- 0.13% ) Mirobenchmark2 ============== test: posix_memalign((void **)&p, 2 * MB, 8 * GB); for (i = 0; i < 1000; i++) { char *_p = p; while (_p < p+4*GB) { assert(*_p == *(_p+4*GB)); _p += 4096; asm volatile ("": : :"memory"); } } hzp: Performance counter stats for 'taskset -c 0 ./test_memcmp2' (5 runs): 3505.727639 task-clock # 0.998 CPUs utilized ( +- 0.26% ) 9 context-switches # 0.003 K/sec ( +- 4.97% ) 4,384 page-faults # 0.001 M/sec ( +- 0.00% ) 8,318,482,466 cycles # 2.373 GHz ( +- 0.26% ) [33.31%] 5,134,318,786 stalled-cycles-frontend # 61.72% frontend cycles idle ( +- 0.42% ) [33.32%] 2,193,266,208 stalled-cycles-backend # 26.37% backend cycles idle ( +- 5.51% ) [33.33%] 9,494,670,537 instructions # 1.14 insns per cycle # 0.54 stalled cycles per insn ( +- 0.13% ) [41.68%] 2,108,522,738 branches # 601.451 M/sec ( +- 0.09% ) [41.68%] 158,746 branch-misses # 0.01% of all branches ( +- 1.60% ) [41.71%] 3,168,102,115 L1-dcache-loads # 903.693 M/sec ( +- 0.11% ) [41.70%] 1,048,710,998 L1-dcache-misses # 33.10% of all L1-dcache hits ( +- 0.11% ) [41.72%] 1,047,699,685 LLC-load # 298.854 M/sec ( +- 0.03% ) [33.38%] 2,287 LLC-misses # 0.00% of all LL-cache hits ( +- 8.27% ) [33.37%] 3,166,187,367 dTLB-loads # 903.147 M/sec ( +- 0.02% ) [33.35%] 4,266,538 dTLB-misses # 0.13% of all dTLB cache hits ( +- 0.03% ) [33.33%] 3.513339813 seconds time elapsed ( +- 0.26% ) vhzp: Performance counter stats for 'taskset -c 0 ./test_memcmp2' (5 runs): 27313.891128 task-clock # 0.998 CPUs utilized ( +- 0.24% ) 62 context-switches # 0.002 K/sec ( +- 0.61% ) 4,384 page-faults # 0.160 K/sec ( +- 0.01% ) 64,747,374,606 cycles # 2.370 GHz ( +- 0.24% ) [33.33%] 61,341,580,278 stalled-cycles-frontend # 94.74% frontend cycles idle ( +- 0.26% ) [33.33%] 56,702,237,511 stalled-cycles-backend # 87.57% backend cycles idle ( +- 0.07% ) [33.33%] 10,033,724,846 instructions # 0.15 insns per cycle # 6.11 stalled cycles per insn ( +- 0.09% ) [41.65%] 2,190,424,932 branches # 80.195 M/sec ( +- 0.12% ) [41.66%] 1,028,630 branch-misses # 0.05% of all branches ( +- 1.50% ) [41.66%] 3,302,006,540 L1-dcache-loads # 120.891 M/sec ( +- 0.11% ) [41.68%] 271,374,358 L1-dcache-misses # 8.22% of all L1-dcache hits ( +- 0.04% ) [41.66%] 20,385,476 LLC-load # 0.746 M/sec ( +- 1.64% ) [33.34%] 76,754 LLC-misses # 0.38% of all LL-cache hits ( +- 2.35% ) [33.34%] 3,309,927,290 dTLB-loads # 121.181 M/sec ( +- 0.03% ) [33.34%] 2,098,967,427 dTLB-misses # 63.41% of all dTLB cache hits ( +- 0.03% ) [33.34%] 27.364448741 seconds time elapsed ( +- 0.24% ) === I personally prefer implementation present in this patchset. It doesn't touch arch-specific code. This patch: Huge zero page (hzp) is a non-movable huge page (2M on x86-64) filled with zeros. For now let's allocate the page on hugepage_init(). We'll switch to lazy allocation later. We are not going to map the huge zero page until we can handle it properly on all code paths. is_huge_zero_{pfn,pmd}() functions will be used by following patches to check whether the pfn/pmd is huge zero page. Signed-off-by: -
Joonsoo Kim authored
The name of this function is not suitable, and removing the function and open-coding it into each call sites makes the code more understandable. Additionally, we shouldn't do an allocation from bootmem when slab_is_available(), so directly return kmalloc()'s return value. Signed-off-by:
-
Joonsoo Kim authored
There is no implementation of bootmem_arch_preferred_node() and a call to this function will cause a compilation error. So remove it. Signed-off-by:
-
- 12 Dec, 2012 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signalLinus Torvalds authored
Pull big execve/kernel_thread/fork unification series from Al Viro: "All architectures are converted to new model. Quite a bit of that stuff is actually shared with architecture trees; in such cases it's literally shared branch pulled by both, not a cherry-pick. A lot of ugliness and black magic is gone (-3KLoC total in this one): - kernel_thread()/kernel_execve()/sys_execve() redesign. We don't do syscalls from kernel anymore for either kernel_thread() or kernel_execve(): kernel_thread() is essentially clone(2) with callback run before we return to userland, the callbacks either never return or do successful do_execve() before returning. kernel_execve() is a wrapper for do_execve() - it doesn't need to do transition to user mode anymore. As a result kernel_thread() and kernel_execve() are arch-independent now - they live in kernel/fork.c and fs/exec.c resp. sys_execve() is also in fs/exec.c and it's completely architecture-independent. - daemonize() is gone, along with its parts in fs/*.c - struct pt_regs * is no longer passed to do_fork/copy_process/ copy_thread/do_execve/search_binary_handler/->load_binary/do_coredump. - sys_fork()/sys_vfork()/sys_clone() unified; some architectures still need wrappers (ones with callee-saved registers not saved in pt_regs on syscall entry), but the main part of those suckers is in kernel/fork.c now." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (113 commits) do_coredump(): get rid of pt_regs argument print_fatal_signal(): get rid of pt_regs argument ptrace_signal(): get rid of unused arguments get rid of ptrace_signal_deliver() arguments new helper: signal_pt_regs() unify default ptrace_signal_deliver flagday: kill pt_regs argument of do_fork() death to idle_regs() don't pass regs to copy_process() flagday: don't pass regs to copy_thread() bfin: switch to generic vfork, get rid of pointless wrappers xtensa: switch to generic clone() openrisc: switch to use of generic fork and clone unicore32: switch to generic clone(2) score: switch to generic fork/vfork/clone c6x: sanitize copy_thread(), get rid of clone(2) wrapper, switch to generic clone() take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.h mn10300: switch to generic fork/vfork/clone h8300: switch to generic fork/vfork/clone tile: switch to generic clone() ... Conflicts: arch/microblaze/include/asm/Kbuild -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC board updates from Olof Johansson: "This branch contains a set of various board updates for ARM platforms. A few shmobile platforms that are stale have been removed, some defconfig updates for various boards selecting new features such as pinctrl subsystem support, and various updates enabling peripherals, etc." Fix up conflicts mostly as per Olof. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore ARM: kirkwood: Add Plat'Home OpenBlocks A6 support ARM: Dove: update defconfig ARM: Kirkwood: update defconfig for new boards arm: orion5x: add DT related options in defconfig arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree arm: orion5x: basic Device Tree support arm: orion5x: mechanical defconfig update ARM: kirkwood: Add support for the MPL CEC4 arm: kirkwood: add support for ZyXEL NSA310 ARM: Kirkwood: new board USI Topkick ARM: kirkwood: use gpio-fan DT binding on lsxl ARM: Kirkwood: add Netspace boards to defconfig ARM: kirkwood: DT board setup for Network Space Mini v2 ARM: kirkwood: DT board setup for Network Space Lite v2 ARM: kirkwood: DT board setup for Network Space v2 and parents leds: leds-ns2: add device tree binding ARM: Kirkwood: Enable the second I2C bus ARM: mmp: select pinctrl driver ...
-
