delete extra space and tab in blank line, there is no functional change.
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Link: https://lore.kernel.org/r/20220727081253.3043941-1-studentxswpy@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth and netfilter, no known blockers for
  the release.

  Current release - regressions:

   - wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop(), fix
     taking the lock before its initialized

   - Bluetooth: mgmt: fix double free on error path

  Current release - new code bugs:

   - eth: ice: fix tunnel checksum offload with fragmented traffic

  Previous releases - regressions:

   - tcp: md5: fix IPv4-mapped support after refactoring, don't take the
     pure v6 path

   - Revert "tcp: change pingpong threshold to 3", improving detection
     of interactive sessions

   - mld: fix netdev refcount leak in mld_{query | report}_work() due to
     a race

   - Bluetooth:
      - always set event mask on suspend, avoid early wake ups
      - L2CAP: fix use-after-free caused by l2cap_chan_put

   - bridge: do not send empty IFLA_AF_SPEC attribute

  Previous releases - always broken:

   - ping6: fix memleak in ipv6_renew_options()

   - sctp: prevent null-deref caused by over-eager error paths

   - virtio-net: fix the race between refill work and close, resulting
     in NAPI scheduled after close and a BUG()

   - macsec:
      - fix three netlink parsing bugs
      - avoid breaking the device state on invalid change requests
      - fix a memleak in another error path

  Misc:

   - dt-bindings: net: ethernet-controller: rework 'fixed-link' schema

   - two more batches of sysctl data race adornment"

* tag 'net-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
  stmmac: dwmac-mediatek: fix resource leak in probe
  ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr
  net: ping6: Fix memleak in ipv6_renew_options().
  net/funeth: Fix fun_xdp_tx() and XDP packet reclaim
  sctp: leave the err path free in sctp_stream_init to sctp_stream_free
  sfc: disable softirqs for ptp TX
  ptp: ocp: Select CRC16 in the Kconfig.
  tcp: md5: fix IPv4-mapped support
  virtio-net: fix the race between refill work and close
  mptcp: Do not return EINPROGRESS when subflow creation succeeds
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
  Bluetooth: Always set event mask on suspend
  Bluetooth: mgmt: Fix double free on error path
  wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()
  ice: do not setup vlan for loopback VSI
  ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
  ice: Fix VSIs unable to share unicast MAC
  ice: Fix tunnel checksum offload with fragmented traffic
  ice: Fix max VLANs available for VF
  netfilter: nft_queue: only allow supported familes and hooks
  ...

If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt()
before returning.  Otherwise it is a resource leak.

Fixes: fa4b3ca6 ("stmmac: dwmac-mediatek: fix clock issue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.

=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263

CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
 dump_backtrace+0x1a8/0x230
 show_stack+0x20/0x70
 dump_stack_lvl+0x68/0x84
 print_report+0xc4/0x120
 kasan_report+0x84/0x120
 __asan_load4+0x94/0xd0
 find_match.part.0+0x70/0x134
 __find_rr_leaf+0x408/0x470
 fib6_table_lookup+0x264/0x540
 ip6_pol_route+0xf4/0x260
 ip6_pol_route_output+0x58/0x70
 fib6_rule_lookup+0x1a8/0x330
 ip6_route_output_flags_noref+0xd8/0x1a0
 ip6_route_output_flags+0x58/0x160
 ip6_dst_lookup_tail+0x5b4/0x85c
 ip6_dst_lookup_flow+0x98/0x120
 rawv6_sendmsg+0x49c/0xc70
 inet_sendmsg+0x68/0x94

Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1

Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done

$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done

It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly,
then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.

	cpu0			cpu1
fib6_table_lookup
__find_rr_leaf
			addrconf_notify [ NETDEV_CHANGEMTU ]
			addrconf_ifdown
			RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown

So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to
fix the null-ptr-deref bug.

Fixes: dcd1f572 ("net/ipv6: Remove fib6_idev")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy().  As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.

    struct ipv6_sr_hdr *hdr;
    char data[24] = {0};
    int fd;

    hdr = (struct ipv6_sr_hdr *)data;
    hdr->hdrlen = 2;
    hdr->type = IPV6_SRCRT_TYPE_4;

    fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
    setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
    close(fd);

To fix memory leaks, let's add a destroy function.

Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range.  The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0).  Thus, the local DoS does
not succeed until we change the default value.  However, at least
Ubuntu/Fedora/RHEL loosen it.

    $ cat /usr/lib/sysctl.d/50-default.conf
    ...
    -net.ipv4.ping_group_range = 0 2147483647

Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.

  setsockopt
      IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
      IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
      IPV6_HOPOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
      IPV6_RTHDR (inet6_sk(sk)->opt)
      IPV6_DSTOPTS (inet6_sk(sk)->opt)
      IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)

  getsockopt
      IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)

For the record, I left a different splat with syzbot's one.

  unreferenced object 0xffff888006270c60 (size 96):
    comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
    hex dump (first 32 bytes):
      01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00  ....D...........
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
      [<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
      [<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
      [<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
      [<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
      [<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
      [<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176

Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a watch is being added to a queue, it needs to guard against
interference from addition of a new watch, manual removal of a watch and
removal of a watch due to some other queue being destroyed.

KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by
holding the key->sem writelocked and by holding refs on both the key and
the queue - but that doesn't prevent interaction from other {key,queue}
pairs.

While add_watch_to_object() does take the spinlock on the event queue,
it doesn't take the lock on the source's watch list.  The assumption was
that the caller would prevent that (say by taking key->sem) - but that
doesn't prevent interference from the destruction of another queue.

Fix this by locking the watcher list in add_watch_to_object().

Fixes: c73be61c ("pipe: Add general notification queue support")
Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: keyrings@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since __post_watch_notification() walks wlist->watchers with only the
RCU read lock held, we need to use RCU methods to add to the list (we
already use RCU methods to remove from the list).

Fix add_watch_to_object() to use hlist_add_head_rcu() instead of
hlist_add_head() for that list.

Fixes: c73be61c ("pipe: Add general notification queue support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet
controller.  The Versal compatible was not released, so it can be
changed.  Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated
form.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/20220726070802.26579-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet
controller.  The Versal compatible was not released, so it can be
changed.  Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated
form.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726070802.26579-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The current implementation of fun_xdp_tx(), used for XPD_TX, is
incorrect in that it takes an address/length pair and later releases it
with page_frag_free(). It is OK for XDP_TX but the same code is used by
ndo_xdp_xmit. In that case it loses the XDP memory type and releases the
packet incorrectly for some of the types. Assorted breakage follows.

Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in
reclaim.

Fixes: db37bc17 ("net/funeth: add the data path")
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Tony Nguyen says:

====================
ice: PPPoE offload support

Marcin Szycik says:

Add support for dissecting PPPoE and PPP-specific fields in flow dissector:
PPPoE session id and PPP protocol type. Add support for those fields in
tc-flower and support offloading PPPoE. Finally, add support for hardware
offload of PPPoE packets in switchdev mode in ice driver.

Example filter:
tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \
    1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR

Changes in iproute2 are required to use the new fields (will be submitted
soon).

ICE COMMS DDP package is required to create a filter in ice.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: Add support for PPPoE hardware offload
  flow_offload: Introduce flow_match_pppoe
  net/sched: flower: Add PPPoE filter
  flow_dissector: Add PPPoE dissectors
====================

Link: https://lore.kernel.org/r/20220726203133.2171332-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Similarly to a recent include/net/ cleanup, this patch adds
missing includes to networking headers under include/linux.
All these problems are currently masked by the existing users
including the missing dependency before the broken header.

Link: https://lore.kernel.org/all/20220723045755.2676857-1-kuba@kernel.org/ v1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220726215652.158167-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This reverts commit 35d099da, reversing
changes made to 58d8bcd4.

I wrongly applied that to the net-next tree instead of the intended
target tree (net). Reverting it on net-next.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 3c783b83 ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.

It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().

As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
and obtain the capabilities driectly.

Fixes: 3c783b83 ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-07-26

This series contains updates to ice driver only.

Przemyslaw corrects accounting for VF VLANs to allow for correct number
of VLANs for untrusted VF. He also correct issue with checksum offload
on VXLAN tunnels.

Ani allows for two VSIs to share the same MAC address.

Maciej corrects checked bits for descriptor completion of loopback

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: do not setup vlan for loopback VSI
  ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
  ice: Fix VSIs unable to share unicast MAC
  ice: Fix tunnel checksum offload with fragmented traffic
  ice: Fix max VLANs available for VF
====================

Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The net_eq() check is already performed inside
devlinks_xa_for_each_registered_get() helper, so remove the redundant
appearance.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220727055912.568391-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Absolute path to other DT schema is preferred over relative one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115650.100726-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change the type of cbq_set_lss to void.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220726030748.243505-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A NULL pointer dereference was reported by Wei Chen:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  RIP: 0010:__list_del_entry_valid+0x26/0x80
  Call Trace:
   <TASK>
   sctp_sched_dequeue_common+0x1c/0x90
   sctp_sched_prio_dequeue+0x67/0x80
   __sctp_outq_teardown+0x299/0x380
   sctp_outq_free+0x15/0x20
   sctp_association_free+0xc3/0x440
   sctp_do_sm+0x1ca7/0x2210
   sctp_assoc_bh_rcv+0x1f6/0x340

This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.

As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.

Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.

Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:

   1) The invoked code is always executed with softirqs disabled for non
      PTP packets.
   2) Better if a ptp packet transmission is not interrupted by softirq
      handling which could lead to high latencies.
   3) netdev_xmit_more used by the TX code requires preemption to be
      disabled.

Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.

Fixes: f79c957a ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The crc16() function is used to check the firmware validity, but
the library was not explicitly selected.

Fixes: 3c3673bd ("ptp: ocp: Add firmware header checks")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Vadim Fedorenko <vadfed@fb.com>
Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After the blamed commit, IPv4 SYN packets handled
by a dual stack IPv6 socket are dropped, even if
perfectly valid.

$ nstat | grep MD5
TcpExtTCPMD5Failure             5                  0.0

For a dual stack listener, an incoming IPv4 SYN packet
would call tcp_inbound_md5_hash() with @family == AF_INET,
while tp->af_specific is pointing to tcp_sock_ipv6_specific.

Only later when an IPv4-mapped child is created, tp->af_specific
is changed to tcp_sock_ipv6_mapped_specific.

Fixes: 7bbb765b ("net/tcp: Merge TCP-MD5 inbound callbacks")
Reported-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/r/20220726115743.2759832-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "Two more bug fixes for asm-generic, one addressing an incorrect
  Kconfig symbol reference and another one fixing a build failure for
  the perf tool on mips and possibly others"

* tag 'asm-generic-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: remove a broken and needless ifdef conditional
  tools: Fixed MIPS builds due to struct flock re-definition

Pull ARM SoC fixes from Arnd Bergmann:
 "One last set of changes for the soc tree:

   - fix clock frequency on lan966x

   - fix incorrect GPIO numbers on some pxa machines

   - update Baolin's email address"

* tag 'soc-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: pxa2xx: Fix GPIO descriptor tables
  mailmap: update Baolin Wang's email
  ARM: dts: lan966x: fix sys_clk frequency

Wenjia Zhang says:

====================
net/smc: updates 2022-07-25

please apply the following patches to netdev's net-next tree.

These patches do some preparation to make ISM available for uses beyond
SMC-D, and a bunch of cleanups.

v2: add "Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, the smc and smc_diag modules were automatically loaded as
dependencies of the ism module whenever an ISM device was present.
With the pending rework of the ISM API, the smc module will no longer
automatically be loaded in presence of an ISM device. Usage of an AF_SMC
socket will still trigger loading of the smc modules, but usage of a
netlink socket will not.
This is addressed by setting the correct module aliases.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the DMBE bits, which are passed on individually in ism_move() as
parameter idx, available to the receiver.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reworked signature of the function to retrieve the system EID: No plausible
reason to use a double pointer. And neither to pass in the device as an
argument, as this identifier is by definition per system, not per device.
Plus some minor consistency edits.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This struct is used in a single place only, and its usage generates
inefficient code. Time to clean up!
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-and-tested-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang < wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].

Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.

[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42

CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x34/0x44
 print_report.cold+0xbb/0x6ac
 ? _printk+0xad/0xde
 ? refill_work+0x43/0xd4
 kasan_report+0xa8/0x130
 ? refill_work+0x43/0xd4
 refill_work+0x43/0xd4
 process_one_work+0x43d/0x780
 worker_thread+0x2a0/0x6f0
 ? process_one_work+0x780/0x780
 kthread+0x167/0x1a0
 ? kthread_exit+0x50/0x50
 ret_from_fork+0x22/0x30
 </TASK>
...

Fixes: b2baed69 ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arun Ramadoss says:

====================
net: dsa: microchip: add support for phylink mac config and link up

This patch series add support common phylink mac config and link up for the ksz
series switches. At present, ksz8795 and ksz9477 doesn't implement the phylink
mac config and link up. It configures the mac interface in the port setup hook.
ksz8830 series switch does not mac link configuration. For lan937x switches, in
the part support patch series has support only for MII and RMII configuration.
Some group of switches have some register address and bit fields common and
others are different. So, this patch aims to have common phylink implementation
which configures the register based on the chip id.

Changes in v2
- combined the modification of duplex, tx_pause and rx_pause into single
  function.

Changes in v1
- Squash the reading rgmii value from dt to patch which apply the rgmii value
- Created the new function ksz_port_set_xmii_speed
- Seperated the namespace values for xmii_ctrl_0 and xmii_ctrl_1 register
- Applied the rgmii delay value based on the rx/tx-internal-delay-ps
====================
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add support for phylink mac config for ksz series of
switches. All the files ksz8795, ksz9477 and lan937x uses the ksz common
xmii function. Instead of calling from the individual files, it is moved
to the ksz common phylink mac config function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the ksz8795 cpu configuration to use the ksz common
xmii set functions.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ksz9477.c file, configuring the xmii register is performed based on
the flag NEW_XMII. The flag is reset for ksz9893 switch and set for
other switch. This patch uses the ksz common xmii set and get function.
The bit values are configured based on the chip id.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch read the rgmii tx and rx delay from device tree and stored it
in the ksz_port.  It applies the rgmii delay to the xmii tune adjust
register based on the interface selected in phylink mac config. There
are two rgmii port in LAN937x and value to be loaded in the register
vary depends on the port selected.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add the common ksz_set_xmii function for ksz series switch
and update the lan937x code phylink mac config. The register address for
the ksz8795 is Port 5 Interface control 6 and for all other switch is
xMII Control 1.
The bit value for selecting the interface is same for
KSZ8795 and KSZ9893 are same. The bit values for KSZ9477 and lan973x are
same. So, this patch add the bit value for each switches in
ksz_chip_data and configure the registers based on the chip id.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add the support for common phylink mac link up for the ksz
series switch. The register address, bit position and values are
configured based on the chip id to the dev->info structure.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add common function for configuring the Full/Half duplex and
transmit/receive flow control. KSZ8795 uses the Global control register
4 for configuring the duplex and flow control, whereas all other KSZ9477
based switch uses the xMII Control 0 register.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the function for configuring the 100/10Mbps speed
selection for the ksz switches. KSZ8795 switch uses Global control 4
register 0x06 bit 4 for choosing 100/10Mpbs. Other switches uses xMII
control 1 0xN300 for it.
For KSZ8795, if the bit is set then 10Mbps is chosen and if bit is
clear then 100Mbps chosen. For all other switches it is other way
around, if the bit is set then 100Mbps is chosen.
So, this patch add the generic function for ksz switch to select the
100/10Mbps speed selection. While configuring, first it disables the
gigabit functionality and then configure the respective speed.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>