- 08 Jun, 2020 1 commit
-
-
Bijan Mottahedeh authored
Account for the number of provided buffers when validating the address range. Signed-off-by:
Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 04 Jun, 2020 5 commits
-
-
Jens Axboe authored
We already have the buffer selected, but we should set the iter list again. Cc: stable@vger.kernel.org # v5.7 Signed-off-by: -
Pavel Begunkov authored
Fail recv/send in case of IORING_SETUP_IOPOLL earlier during prep, so it'd be done only once. Removes duplication as well Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
-
Pavel Begunkov authored
io_openat_prep() and io_openat2_prep() are identical except for how struct open_how is built. Deduplicate it with a helper. Signed-off-by:
-
Pavel Begunkov authored
build_open_how() is just adjusting open_flags/mode. Do it once during prep. It looks better than storing raw values for the future. Signed-off-by:
-
Pavel Begunkov authored
IORING_SETUP_IOPOLL is defined only for read/write, other opcodes should be disallowed, otherwise it'll get an error as below. Also refuse open/close with SQPOLL, as the polling thread wouldn't know which file table to use. RIP: 0010:io_iopoll_getevents+0x111/0x5a0 Call Trace: ? _raw_spin_unlock_irqrestore+0x24/0x40 ? do_send_sig_info+0x64/0x90 io_iopoll_reap_events.part.0+0x5e/0xa0 io_ring_ctx_wait_and_kill+0x132/0x1c0 io_uring_release+0x20/0x30 __fput+0xcd/0x230 ____fput+0xe/0x10 task_work_run+0x67/0xa0 do_exit+0x353/0xb10 ? handle_mm_fault+0xd4/0x200 ? syscall_trace_enter+0x18c/0x2c0 do_group_exit+0x43/0xa0 __x64_sys_exit_group+0x18/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
- 02 Jun, 2020 34 commits
-
-
Jens Axboe authored
A previous commit enabled this functionality, which also enabled O_PATH to work correctly with io_uring. But we can't safely close the ring itself, as the file handle isn't reference counted inside io_uring_enter(). Instead of jumping through hoops to enable ring closure, add a "soft" ->needs_file option, ->needs_file_no_error. This enables O_PATH file descriptors to work, but still catches the case of trying to close the ring itself. Reported-by:
Jann Horn <jannh@google.com> Fixes: 904fbcb1 ("io_uring: remove 'fd is io_uring' from close path") Signed-off-by:
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring updates from Jens Axboe: "A relatively quiet round, mostly just fixes and code improvements. In particular: - Make statx just use the generic statx handler, instead of open coding it. We don't need that anymore, as we always call it async safe (Bijan) - Enable closing of the ring itself. Also fixes O_PATH closure (me) - Properly name completion members (me) - Batch reap of dead file registrations (me) - Allow IORING_OP_POLL with double waitqueues (me) - Add tee(2) support (Pavel) - Remove double off read (Pavel) - Fix overflow cancellations (Pavel) - Improve CQ timeouts (Pavel) - Async defer drain fixes (Pavel) - Add support for enabling/disabling notifications on a registered eventfd (Stefano) - Remove dead state parameter (Xiaoguang) - Disable SQPOLL submit on dying ctx (Xiaoguang) - Various code cleanups" * tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-block: (29 commits) io_uring: fix overflowed reqs cancellation io_uring: off timeouts based only on completions io_uring: move timeouts flushing to a helper statx: hide interfaces no longer used by io_uring io_uring: call statx directly statx: allow system call to be invoked from io_uring io_uring: add io_statx structure io_uring: get rid of manual punting in io_close io_uring: separate DRAIN flushing into a cold path io_uring: don't re-read sqe->off in timeout_prep() io_uring: simplify io_timeout locking io_uring: fix flush req->refs underflow io_uring: don't submit sqes when ctx->refs is dying io_uring: async task poll trigger cleanup io_uring: add tee(2) support splice: export do_tee() io_uring: don't repeat valid flag list io_uring: rename io_file_put() io_uring: remove req->needs_fixed_files io_uring: cleanup io_poll_remove_one() logic ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: "On top of the core changes, here are the block driver changes for this merge window: - NVMe changes: - NVMe over Fibre Channel protocol updates, which also reach over to drivers/scsi/lpfc (James Smart) - namespace revalidation support on the target (Anthony Iliopoulos) - gcc zero length array fix (Arnd Bergmann) - nvmet cleanups (Chaitanya Kulkarni) - misc cleanups and fixes (me, Keith Busch, Sagi Grimberg) - use a SRQ per completion vector (Max Gurtovoy) - fix handling of runtime changes to the queue count (Weiping Zhang) - t10 protection information support for nvme-rdma and nvmet-rdma (Israel Rukshin and Max Gurtovoy) - target side AEN improvements (Chaitanya Kulkarni) - various fixes and minor improvements all over, icluding the nvme part of the lpfc driver" - Floppy code cleanup series (Willy, Denis) - Floppy contention fix (Jiri) - Loop CONFIGURE support (Martijn) - bcache fixes/improvements (Coly, Joe, Colin) - q->queuedata cleanups (Christoph) - Get rid of ioctl_by_bdev (Christoph, Stefan) - md/raid5 allocation fixes (Coly) - zero length array fixes (Gustavo) - swim3 task state fix (Xu)" * tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits) bcache: configure the asynchronous registertion to be experimental bcache: asynchronous devices registration bcache: fix refcount underflow in bcache_device_free() bcache: Convert pr_<level> uses to a more typical style bcache: remove redundant variables i and n lpfc: Fix return value in __lpfc_nvme_ls_abort lpfc: fix axchg pointer reference after free and double frees lpfc: Fix pointer checks and comments in LS receive refactoring nvme: set dma alignment to qword nvmet: cleanups the loop in nvmet_async_events_process nvmet: fix memory leak when removing namespaces and controllers concurrently nvmet-rdma: add metadata/T10-PI support nvmet: add metadata support for block devices nvmet: add metadata/T10-PI support nvme: add Metadata Capabilities enumerations nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len nvmet: rename nvmet_rw_len to nvmet_rw_data_len nvmet: add metadata characteristics for a namespace nvme-rdma: add metadata/T10-PI support nvme-rdma: introduce nvme_rdma_sgl structure ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
-
Hugh Dickins authored
Just finished bisecting mmotm, to find why a test which used to take four minutes now took more than an hour: the __buffer_migrate_page() cleanup left behind a get_page() which attach_page_private() now does. Fixes: cd0f3715 ("mm/migrate.c: call detach_page_private to cleanup code") Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull hmm updates from Jason Gunthorpe: "This series adds a selftest for hmm_range_fault() and several of the DEVICE_PRIVATE migration related actions, and another simplification for hmm_range_fault()'s API. - Simplify hmm_range_fault() with a simpler return code, no HMM_PFN_SPECIAL, and no customizable output PFN format - Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related functionality" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: MAINTAINERS: add HMM selftests mm/hmm/test: add selftests for HMM mm/hmm/test: add selftest driver for HMM mm/hmm: remove the customizable pfn format from hmm_range_fault mm/hmm: remove HMM_PFN_SPECIAL drm/amdgpu: remove dead code after hmm_range_fault() mm/hmm: make hmm_range_fault return 0 or -1 -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull PNP update from Rafael Wysocki: "Replace a zero-length array with a flexible-array (Gustavo A. R. Silva)" * tag 'pnp-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PNPBIOS: Replace zero-length array with flexible-array
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20200430, fix several reference counting errors related to ACPI tables, add _Exx / _Lxx support to the GED driver, add a new acpi_evaluate_reg() helper, add new DPTF battery participant driver and extend the DPFT power participant driver, improve the handling of memory failures in the APEI code, add a blacklist entry to the backlight driver, update the PMIC driver and the processor idle driver, fix two kobject reference count leaks, and make a few janitory changes. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200430: - Move acpi_gbl_next_cmd_num definition (Erik Kaneda). - Ignore AE_ALREADY_EXISTS status in the disassembler when parsing create operators (Erik Kaneda). - Add status checks to the dispatcher (Erik Kaneda). - Fix required parameters for _NIG and _NIH (Erik Kaneda). - Make acpi_protocol_lengths static (Yue Haibing). - Fix ACPI table reference counting errors in several places, mostly in error code paths (Hanjun Guo). - Extend the Generic Event Device (GED) driver to support _Exx and _Lxx handler methods (Ard Biesheuvel). - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug code to use it (Hans de Goede). - Add new DPTF battery participant driver and make the DPFT power participant driver create more sysfs device attributes (Srinivas Pandruvada). - Improve the handling of memory failures in APEI (James Morse). - Add new blacklist entry for Acer TravelMate 5735Z to the backlight driver (Paul Menzel). - Add i2c address for thermal control to the PMIC driver (Mauro Carvalho Chehab). - Allow the ACPI processor idle driver to work on platforms with only one ACPI C-state present (Zhang Rui). - Fix kobject reference count leaks in error code paths in two places (Qiushi Wu). - Delete unused proc filename macros and make some symbols static (Pascal Terjan, Zheng Zengkai, Zou Wei)" * tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe() ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile() ACPI: GED: use correct trigger type field in _Exx / _Lxx handling ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver ACPI: video: Use native backlight on Acer TravelMate 5735Z arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() ACPI / PMIC: Add i2c address for thermal control ACPI: GED: add support for _Exx / _Lxx handler methods ACPI: Delete unused proc filename macros ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper ACPI: utils: Add acpi_evaluate_reg() helper ACPI: debug: Make two functions static ACPI: sleep: Put the FACS table after using it ACPI: scan: Put SPCR and STAO table after using it ACPI: EC: Put the ACPI table after using it ACPI: APEI: Put the HEST table for error path ACPI: APEI: Put the error record serialization table for error path ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These rework the system-wide PM driver flags, make runtime switching of cpuidle governors easier, improve the user space hibernation interface code, add intel-speed-select interface documentation, add more debug messages to the ACPI code handling suspend to idle, update the cpufreq core and drivers, fix a minor issue in the cpuidle core and update two cpuidle drivers, improve the PM-runtime framework, update the Intel RAPL power capping driver, update devfreq core and drivers, and clean up the cpupower utility. Specifics: - Rework the system-wide PM driver flags to make them easier to understand and use and update their documentation (Rafael Wysocki, Alan Stern). - Allow cpuidle governors to be switched at run time regardless of the kernel configuration and update the related documentation accordingly (Hanjun Guo). - Improve the resume device handling in the user space hibernarion interface code (Domenico Andreoli). - Document the intel-speed-select sysfs interface (Srinivas Pandruvada). - Make the ACPI code handing suspend to idle print more debug messages to help diagnose issues with it (Rafael Wysocki). - Fix a helper routine in the cpufreq core and correct a typo in the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang Wenhu). - Update cpufreq drivers: - Make the intel_pstate driver start in the passive mode by default on systems without HWP (Rafael Wysocki). - Add i.MX7ULP support to the imx-cpufreq-dt driver and add i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan). - Convert the qoriq cpufreq driver to a platform one, make the platform code create a suitable device object for it and add platform dependencies to it (Mian Yousaf Kaukab, Geert Uytterhoeven). - Fix wrong compatible binding in the qcom driver (Ansuel Smith). - Build the omap driver by default for ARCH_OMAP2PLUS (Anders Roxell). - Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar). - Update cpuidle core and drivers: - Fix three reference count leaks in error code paths in the cpuidle core (Qiushi Wu). - Convert Qualcomm SPM to a generic cpuidle driver (Stephan Gerhold). - Fix up the execution order when entering a domain idle state in the PSCI driver (Ulf Hansson). - Fix a reference counting issue related to clock management and clean up two oddities in the PM-runtime framework (Rafael Wysocki, Andy Shevchenko). - Add ElkhartLake support to the Intel RAPL power capping driver and remove an unused local MSR definition from it (Jacob Pan, Sumeet Pawnikar). - Update devfreq core and drivers: - Replace strncpy() with strscpy() in the devfreq core and use lockdep asserts instead of manual checks for a locked mutex in it (Dmitry Osipenko, Krzysztof Kozlowski). - Add a generic imx bus scaling driver and make it register an interconnect device (Leonard Crestez, Gustavo A. R. Silva). - Make the cpufreq notifier in the tegra30 driver take boosting into account and delete an unuseful error message from that driver (Dmitry Osipenko, Markus Elfring). - Remove unneeded semicolon from the cpupower code (Zou Wei)" * tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits) cpuidle: Fix three reference count leaks PM: runtime: Replace pm_runtime_callbacks_present() PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: Replace strncpy with strscpy PM / devfreq: imx: Register interconnect device PM / devfreq: Add generic imx bus scaling driver PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe() PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting PM: hibernate: Restrict writes to the resume device PM: runtime: clk: Fix clk_pm_runtime_get() error path cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver ACPI: EC: PM: s2idle: Extend GPE dispatching debug message ACPI: PM: s2idle: Print type of wakeup debug messages powercap: RAPL: remove unused local MSR define PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() Documentation: admin-guide: pm: Document intel-speed-select PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling Documentation: ABI: make current_governer_ro as a candidate for removal ... -
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver updates from Andy Shevchenko: - Add a support of the media keys on the ASUS laptop UX325JA/UX425JA - ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA, T200TA - Big refactoring of Intel SCU driver with Elkhart Lake support has been added - Slim Bootloarder firmware update signaling WMI driver has been added - Thinkpad ACPI driver can handle dual fan configuration on new P and X models - Touchscreen DMI driver has been extended to support - MP-man MPWIN895CL tablet - ONDA V891 v5 tablet - techBite Arc 11.6 - Trekstor Twin 10.1 - Trekstor Yourbook C11B - Vinga J116 - Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet models - Intel Speed Select tools update - Plenty of small cleanups here and there * tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits) platform/x86: dcdbas: Check SMBIOS for protected buffer address platform/x86: asus_wmi: Reserve more space for struct bias_args platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015) platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32() platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns platform/x86: acerhdf: replace space by * in modalias platform/x86: ISST: Increase timeout tools/power/x86/intel-speed-select: Fix invalid core mask tools/power/x86/intel-speed-select: Increase CPU count tools/power/x86/intel-speed-select: Fix json perf-profile output output platform/x86: dell-wmi: Ignore keyboard attached / detached events platform/x86: dell-laptop: don't register micmute LED if there is no token platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint() platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write() platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",") platform/x86: intel-vbtn: Detect switch position before registering the input-device ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Enable erase/discard/trim support for all (e)MMC/SD hosts - Export information through sysfs about enhanced RPMB support (eMMC v5.1+) - Align the initialization commands for SDIO cards - Fix SDIO initialization to prevent memory leaks and NULL pointer errors - Do not export undefined MMC_NAME/MODALIAS for SDIO cards - Export device/vendor field from common CIS for SDIO cards - Move SDIO IDs from functional drivers to the common SDIO header - Introduce the ->request_atomic() host ops MMC host: - Improve support for HW busy signaling for several hosts - Converting some DT bindings to the json-schema - meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller - meson-mx-sdio: Run a soft reset to recover from timeout/CRC error - mmci: Convert to use mmc_regulator_set_vqmmc() - mmci_stm32_sdmmc: Fix a couple of DMA bugs - mmci_stm32_sdmmc: Fix power on issue - renesas,mmcif,sdhci: Document r8a7742 DT bindings - renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions - renesas_sdhi: Improvements to the TAP selection - renesas_sdhi/tmio: Further fixup runtime PM management at ->remove() - sdhci: Introduce ops to dump vendor specific registers - sdhci-cadence: Fix PHY write sequence - sdhci-esdhc-imx: Improve tunings - sdhci-esdhc-imx: Enable GPIO card detect as system wakeup - sdhci-esdhc-imx: Add HS400 support for i.MX6SLL - sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller - m68k: mcf5441x: Add platform data to enable esdhc mmc controller - sdhci-msm: Improve HS400 tuning - sdhci-msm: Dump vendor specific registers at error - sdhci-msm: Add support for DLL/DDR properties provided from DT - sdhci-msm: Add support for the sm8250 variant - sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate() - sdhci-of-arasan: Add support for Intel Keem Bay variant - sdhci-of-arasan: Add support for Xilinx Versal SD variant - sdhci-of-dwcmshc: Add support for system suspend/resume - sdhci-of-dwcmshc: Fix UHS signaling support - sdhci-of-esdhc: Fix tuning for eMMC HS400 mode - sdhci-pci-gli: Add Genesys Logic GL9763E support - sdhci-sprd: Add support for the ->request_atomic() ops - sdhci-tegra: Avoid reading autocal timeout values when not applicable MEMSTICK: - Minor trivial update" * tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits) dt-bindings: mmc: Convert sdhci-pxa to json-schema mmc: sdhci-msm: Clear tuning done flag while hs400 tuning mmc: core: Export device/vendor ids from Common CIS for SDIO cards mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards mmc: sdhci-of-at91: fix CALCR register being rewritten mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning mmc: sdhci-esdhc-imx: fix the mask for tuning start point mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin mmc: mmci_sdmmc: fix DMA API warning max segment size mmc: mmci_sdmmc: fix DMA API warning overlapping mappings mmc: sdhci-of-arasan: Add support for Intel Keem Bay dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay mmc: sdhci-cadence: fix PHY write mmc: sdio: Sort all SDIO IDs in common include file mmc: sdio: Fix Cypress SDIO IDs macros in common include file mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file mmc: sdio: Move SDIO IDs from ath10k driver to common include file mmc: sdio: Move SDIO IDs from ath6kl driver to common include file mmc: sdio: Move SDIO IDs from smssdio driver to common include file mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file ...
-
Linus Torvalds authored
Merge updates from Andrew Morton: "A few little subsystems and a start of a lot of MM patches. Subsystems affected by this patch series: squashfs, ocfs2, parisc, vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup, swap, memcg, pagemap, memory-failure, vmalloc, kasan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) kasan: move kasan_report() into report.c mm/mm_init.c: report kasan-tag information stored in page->flags ubsan: entirely disable alignment checks under UBSAN_TRAP kasan: fix clang compilation warning due to stack protector x86/mm: remove vmalloc faulting mm: remove vmalloc_sync_(un)mappings() x86/mm/32: implement arch_sync_kernel_mappings() x86/mm/64: implement arch_sync_kernel_mappings() mm/ioremap: track which page-table levels were modified mm/vmalloc: track which page-table levels were modified mm: add functions to track page directory modifications s390: use __vmalloc_node in stack_alloc powerpc: use __vmalloc_node in alloc_vm_stack arm64: use __vmalloc_node in arch_alloc_vmap_stack mm: remove vmalloc_user_node_flags mm: switch the test_vmalloc module to use __vmalloc_node mm: remove __vmalloc_node_flags_caller mm: remove both instances of __vmalloc_node_flags mm: remove the prot argument to __vmalloc_node mm: remove the pgprot argument to __vmalloc ...
-
Andrey Konovalov authored
The kasan_report() functions belongs to report.c, as it's a common functions that does error reporting. Reported-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
-
Jing Xia authored
The pageflags_layout_usage shows incorrect message by means of mminit_loglevel when Kasan runs in the mode of software tag-based enabled with CONFIG_KASAN_SW_TAGS. This patch corrects it and reports kasan-tag information. Signed-off-by:
Jing Xia <jing.xia@unisoc.com> Signed-off-by:
-
Kees Cook authored
Commit 8d58f222 ("ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST") tried to fix the pathological results of UBSAN_ALIGNMENT with UBSAN_TRAP (which objtool would rightly scream about), but it made an assumption about how COMPILE_TEST gets set (it is not set for randconfig). As a result, we need a bigger hammer here: just don't allow the alignment checks with the trap mode. Fixes: 8d58f222 ("ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Andrey Konovalov authored
KASAN uses a single cc-option invocation to disable both conserve-stack and stack-protector flags. The former flag is not present in Clang, which causes cc-option to fail, and results in stack-protector being enabled. Fix by using separate cc-option calls for each flag. Also collect all flags in a variable to avoid calling cc-option multiple times for different files. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/c2f0c8e4048852ae014f4a391d96ca42d27e3255.1590779332.git.andreyknvl@google.comSigned-off-by:
-
Joerg Roedel authored
Remove fault handling on vmalloc areas, as the vmalloc code now takes care of synchronizing changes to all page-tables in the system. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lkml.kernel.org/r/20200515140023.25469-8-joro@8bytes.orgSigned-off-by:
-
Joerg Roedel authored
These functions are not needed anymore because the vmalloc and ioremap mappings are now synchronized when they are created or torn down. Remove all callers and function definitions. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
-
Joerg Roedel authored
Implement the function to sync changes in vmalloc and ioremap ranges to all page-tables. Signed-off-by:
-
Joerg Roedel authored
Implement the function to sync changes in vmalloc and ioremap ranges to all page-tables. Signed-off-by:
-
Joerg Roedel authored
Track at which levels in the page-table entries were modified by ioremap_page_range(). After the page-table has been modified, use that information do decide whether the new arch_sync_kernel_mappings() needs to be called. The iounmap path re-uses vunmap(), which has already been taken care of. Signed-off-by:
-
Joerg Roedel authored
Track at which levels in the page-table entries were modified by vmap/vunmap. After the page-table has been modified, use that information do decide whether the new arch_sync_kernel_mappings() needs to be called. [akpm@linux-foundation.org: map_kernel_range_noflush() needs the arch_sync_kernel_mappings() call] Signed-off-by:
-
Joerg Roedel authored
Patch series "mm: Get rid of vmalloc_sync_(un)mappings()", v3. After the recent issue with vmalloc and tracing code[1] on x86 and a long history of previous issues related to the vmalloc_sync_mappings() interface, I thought the time has come to remove it. Please see [2], [3], and [4] for some other issues in the past. The patches add tracking of page-table directory changes to the vmalloc and ioremap code. Depending on which page-table levels changes have been made, a new per-arch function is called: arch_sync_kernel_mappings(). On x86-64 with 4-level paging, this function will not be called more than 64 times in a systems runtime (because vmalloc-space takes 64 PGD entries which are only populated, but never cleared). As a side effect this also allows to get rid of vmalloc faults on x86, making it safe to touch vmalloc'ed memory in the page-fault handler. Note that this potentially includes per-cpu memory. This patch (of 7): Add page-table allocation functions which will keep track of changed directory entries. They are needed for new PGD, P4D, PUD, and PMD entries and will be used in vmalloc and ioremap code to decide whether any changes in the kernel mappings need to be synchronized between page-tables in the system. Signed-off-by:
-
Christoph Hellwig authored
stack_alloc can use a slightly higher level vmalloc function. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
-
Christoph Hellwig authored
alloc_vm_stack can use a slightly higher level vmalloc function. Signed-off-by:
-
Christoph Hellwig authored
arch_alloc_vmap_stack can use a slightly higher level vmalloc function. Signed-off-by:
-
Christoph Hellwig authored
Open code it in __bpf_map_area_alloc, which is the only caller. Also clean up __bpf_map_area_alloc to have a single vmalloc call with slightly different flags instead of the current two different calls. For this to compile for the nommu case add a __vmalloc_node_range stub to nommu.c. [akpm@linux-foundation.org: fix nommu.c build] Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gao Xiang <xiang@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20200414131348.444715-27-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
No need to export the very low-level __vmalloc_node_range when the test module can use a slightly higher level variant. [akpm@linux-foundation.org: add missing `node' arg] [akpm@linux-foundation.org: fix riscv nommu build] Signed-off-by:
-
Christoph Hellwig authored
Just use __vmalloc_node instead which gets and extra argument. To be able to to use __vmalloc_node in all caller make it available outside of vmalloc and implement it in nommu.c. [akpm@linux-foundation.org: fix nommu build] Signed-off-by:
-
Christoph Hellwig authored
The real version just had a few callers that can open code it and remove one layer of indirection. The nommu stub was public but only had a single caller, so remove it and avoid a CONFIG_MMU ifdef in vmalloc.h. Signed-off-by:
-
Christoph Hellwig authored
This is always PAGE_KERNEL now. Signed-off-by:
-
Christoph Hellwig authored
The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it. Signed-off-by:
Wei Liu <wei.liu@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
The non-cached vmalloc mapping was initially added as a hack for the first-gen amigaone platform (6xx/book32s), isn't fully supported upstream, and which used the legacy radeon driver together with non-coherent DMA. However this only ever worked reliably for DRI . Remove the hack as it is the last user of __vmalloc passing a page protection flag other than PAGE_KERNEL and didn't do anything for other platforms with non-coherent DMA. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
