Skip to content

L
linux
Switch branch/tag
  1. 28 Sep, 2020 5 commits
  3. 27 Sep, 2020 4 commits
  5. 26 Sep, 2020 7 commits
  7. 25 Sep, 2020 23 commits
    • Ivan Khoronzhuk's avatar
      net: ethernet: cavium: octeon_mgmt: use phy_start and phy_stop · 4663ff60
      Ivan Khoronzhuk authored 
      To start also "phy state machine", with UP state as it should be,
the phy_start() has to be used, in another case machine even is not
triggered. After this change negotiation is supposed to be triggered
by SM workqueue.

It's not correct usage, but it appears after the following patch,
so add it as a fix.

Fixes: 74a992b3 ("net: phy: add phy_check_link_status")
Signed-off-by: default avatarIvan Khoronzhuk <ikhoronz@cisco.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4663ff60
    • Wong Vee Khee's avatar
      net: stmmac: Fix clock handling on remove path · ac322f86
      Wong Vee Khee authored 
      While unloading the dwmac-intel driver, clk_disable_unprepare() is
being called twice in stmmac_dvr_remove() and
intel_eth_pci_remove(). This causes kernel panic on the second call.

Removing the second call of clk_disable_unprepare() in
intel_eth_pci_remove().

Fixes: 09f012e6 ("stmmac: intel: Fix clock handling on error and remove paths")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: default avatarVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: default avatarWong Vee Khee <vee.khee.wong@intel.com>
Reviewed-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ac322f86
    • Ronak Doshi's avatar
      vmxnet3: fix cksum offload issues for non-udp tunnels · 1dac3b1b
      Ronak Doshi authored 
      Commit dacce2be ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the inner
offload capability is to be restrictued to UDP tunnels.

This patch fixes the issue for non-udp tunnels by adding features
check capability and filtering appropriate features for non-udp tunnels.

Fixes: dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: default avatarRonak Doshi <doshir@vmware.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1dac3b1b
    • David S. Miller's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue · abe2f12d
      David S. Miller authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2020-09-25

This series contains updates to the iavf and ice driver.

Sylwester fixes a crash with iavf resume due to getting the wrong pointers.

Ani fixes a call trace in ice resume by calling pci_save_state().

Jakes fixes memory leaks in case of register_netdev() failure or
ice_cfg_vsi_lan() failure for the ice driver.

v2: Rebased; no other changes
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      abe2f12d
    • David S. Miller's avatar
      Merge tag 'wireless-drivers-2020-09-25' of... · 4e1b469a
      David S. Miller authored 
      Merge tag 'wireless-drivers-2020-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.9

Second, and last, set of fixes for v5.9. Only one important regression
fix for mt76.

mt76

* fix a regression in aggregation which appeared after mac80211 changes
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e1b469a
    • Jacob Keller's avatar
      ice: fix memory leak in ice_vsi_setup · f6a07271
      Jacob Keller authored 
      During ice_vsi_setup, if ice_cfg_vsi_lan fails, it does not properly
release memory associated with the VSI rings. If we had used devres
allocations for the rings, this would be ok. However, we use kzalloc and
kfree_rcu for these ring structures.

Using the correct label to cleanup the rings during ice_vsi_setup
highlights an issue in the ice_vsi_clear_rings function: it can leave
behind stale ring pointers in the q_vectors structure.

When releasing rings, we must also ensure that no q_vector associated
with the VSI will point to this ring again. To resolve this, loop over
all q_vectors and release their ring mapping. Because we are about to
free all rings, no q_vector should remain pointing to any of the rings
in this VSI.

Fixes: 5513b920 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support")
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      f6a07271
    • Jacob Keller's avatar
      ice: fix memory leak if register_netdev_fails · 135f4b9e
      Jacob Keller authored 
      The ice_setup_pf_sw function can cause a memory leak if register_netdev
fails, due to accidentally failing to free the VSI rings. Fix the memory
leak by using ice_vsi_release, ensuring we actually go through the full
teardown process.

This should be safe even if the netdevice is not registered because we
will have set the netdev pointer to NULL, ensuring ice_vsi_release won't
call unregister_netdev.

An alternative fix would be moving management of the PF VSI netdev into
the main VSI setup code. This is complicated and likely requires
significant refactor in how we manage VSIs

Fixes: 3a858ba3 ("ice: Add support for VSI allocation and deallocation")
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      135f4b9e
    • Anirudh Venkataramanan's avatar
      ice: Fix call trace on suspend · 466e4392
      Anirudh Venkataramanan authored 
      It appears that the ice_suspend flow is missing a call to pci_save_state
and this is triggering the message "State of device not saved by
ice_suspend" and a call trace. Fix it.

Fixes: 769c500d ("ice: Add advanced power mgmt for WoL")
Signed-off-by: default avatarAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      466e4392
    • Sylwester Dziedziuch's avatar
      iavf: Fix incorrect adapter get in iavf_resume · 75598a8f
      Sylwester Dziedziuch authored 
      When calling iavf_resume there was a crash because wrong
function was used to get iavf_adapter and net_device pointers.
Changed how iavf_resume is getting iavf_adapter and net_device
pointers from pci_dev.

Fixes: 5eae00c5 ("i40evf: main driver core")
Signed-off-by: default avatarSylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Reviewed-by: default avatarAleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      75598a8f
    • Herbert Xu's avatar
      xfrm: Use correct address family in xfrm_state_find · e94ee171
      Herbert Xu authored 
      The struct flowi must never be interpreted by itself as its size
depends on the address family.  Therefore it must always be grouped
with its original family value.

In this particular instance, the original family value is lost in
the function xfrm_state_find.  Therefore we get a bogus read when
it's coupled with the wrong family which would occur with inter-
family xfrm states.

This patch fixes it by keeping the original family value.

Note that the same bug could potentially occur in LSM through
the xfrm_state_pol_flow_match hook.  I checked the current code
there and it seems to be safe for now as only secid is used which
is part of struct flowi_common.  But that API should be changed
so that so that we don't get new bugs in the future.  We could
do that by replacing fl with just secid or adding a family field.

Reported-by: syzbot+577fbac3145a6eb2e7a5@syzkaller.appspotmail.com
Fixes: 48b8d783 ("[XFRM]: State selection update to use inner...")
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      e94ee171
    • Priyaranjan Jha's avatar
      tcp: skip DSACKs with dubious sequence ranges · ad2b9b0f
      Priyaranjan Jha authored 
      Currently, we use length of DSACKed range to compute number of
delivered packets. And if sequence range in DSACK is corrupted,
we can get bogus dsacked/acked count, and bogus cwnd.

This patch put bounds on DSACKed range to skip update of data
delivery and spurious retransmission information, if the DSACK
is unlikely caused by sender's action:
- DSACKed range shouldn't be greater than maximum advertised rwnd.
- Total no. of DSACKed segments shouldn't be greater than total
  no. of retransmitted segs. Unlike spurious retransmits, network
  duplicates or corrupted DSACKs shouldn't be counted as delivery.
Signed-off-by: default avatarPriyaranjan Jha <priyarjha@google.com>
Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ad2b9b0f
    • Jamie Iles's avatar
      net/fsl: quieten expected MDIO access failures · 1ec8e748
      Jamie Iles authored 
      MDIO reads can happen during PHY probing, and printing an error with
dev_err can result in a large number of error messages during device
probe.  On a platform with a serial console this can result in
excessively long boot times in a way that looks like an infinite loop
when multiple busses are present.  Since 0f183fd1 (net/fsl: enable
extended scanning in xgmac_mdio) we perform more scanning so there are
potentially more failures.

Reduce the logging level to dev_dbg which is consistent with the
Freescale enetc driver.

Cc: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: default avatarJamie Iles <jamie@nuviainc.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1ec8e748
    • Helmut Grohne's avatar
      net: dsa: microchip: really look for phy-mode in port nodes · 912aae27
      Helmut Grohne authored 
      The previous implementation failed to account for the "ports" node. The
actual port nodes are not child nodes of the switch node, but a "ports"
node sits in between.

Fixes: edecfa98 ("net: dsa: microchip: look for phy-mode in port nodes")
Signed-off-by: default avatarHelmut Grohne <helmut.grohne@intenta.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      912aae27
    • Rohit Maheshwari's avatar
      net/tls: race causes kernel panic · 38f7e1c0
      Rohit Maheshwari authored 
      BUG: kernel NULL pointer dereference, address: 00000000000000b8
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 80000008b6fef067 P4D 80000008b6fef067 PUD 8b6fe6067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 12 PID: 23871 Comm: kworker/12:80 Kdump: loaded Tainted: G S
 5.9.0-rc3+ #1
 Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.1 03/29/2018
 Workqueue: events tx_work_handler [tls]
 RIP: 0010:tx_work_handler+0x1b/0x70 [tls]
 Code: dc fe ff ff e8 16 d4 a3 f6 66 0f 1f 44 00 00 0f 1f 44 00 00 55 53 48 8b
 6f 58 48 8b bd a0 04 00 00 48 85 ff 74 1c 48 8b 47 28 <48> 8b 90 b8 00 00 00 83
 e2 02 75 0c f0 48 0f ba b0 b8 00 00 00 00
 RSP: 0018:ffffa44ace61fe88 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: ffff91da9e45cc30 RCX: dead000000000122
 RDX: 0000000000000001 RSI: ffff91da9e45cc38 RDI: ffff91d95efac200
 RBP: ffff91da133fd780 R08: 0000000000000000 R09: 000073746e657665
 R10: 8080808080808080 R11: 0000000000000000 R12: ffff91dad7d30700
 R13: ffff91dab6561080 R14: 0ffff91dad7d3070 R15: ffff91da9e45cc38
 FS:  0000000000000000(0000) GS:ffff91dad7d00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000000b8 CR3: 0000000906478003 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  process_one_work+0x1a7/0x370
  worker_thread+0x30/0x370
  ? process_one_work+0x370/0x370
  kthread+0x114/0x130
  ? kthread_park+0x80/0x80
  ret_from_fork+0x22/0x30

tls_sw_release_resources_tx() waits for encrypt_pending, which
can have race, so we need similar changes as in commit
0cada332 here as well.

Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: default avatarRohit Maheshwari <rohitm@chelsio.com>
Acked-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      38f7e1c0
    • Wang Qing's avatar
      net/ethernet/broadcom: fix spelling typo · 0eb11dfe
      Wang Qing authored 
      Modify the comment typo: "compliment" -> "complement".
Signed-off-by: default avatarWang Qing <wangqing@vivo.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0eb11dfe
    • Xiaoliang Yang's avatar
      net: mscc: ocelot: fix fields offset in SG_CONFIG_REG_3 · 4ab810a4
      Xiaoliang Yang authored 
      INIT_IPS and GATE_ENABLE fields have a wrong offset in SG_CONFIG_REG_3.
This register is used by stream gate control of PSFP, and it has not
been used before, because PSFP is not implemented in ocelot driver.
Signed-off-by: default avatarXiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ab810a4
    • Xiaoliang Yang's avatar
      net: dsa: felix: convert TAS link speed based on phylink speed · dba1e466
      Xiaoliang Yang authored 
      state->speed holds a value of 10, 100, 1000 or 2500, but
QSYS_TAG_CONFIG_LINK_SPEED expects a value of 0, 1, 2, 3. So convert the
speed to a proper value.

Fixes: de143c0e ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload")
Signed-off-by: default avatarXiaoliang Yang <xiaoliang.yang_1@nxp.com>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dba1e466
    • Luo bin's avatar
      hinic: fix wrong return value of mac-set cmd · f68910a8
      Luo bin authored 
      It should also be regarded as an error when hw return status=4 for PF's
setting mac cmd. Only if PF return status=4 to VF should this cmd be
taken special treatment.

Fixes: 7dd29ee1 ("hinic: add sriov feature support")
Signed-off-by: default avatarLuo bin <luobin9@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f68910a8
    • Xie He's avatar
      drivers/net/wan/x25_asy: Correct the ndo_open and ndo_stop functions · ed46cd1d
      Xie He authored 
      1.
Move the lapb_register/lapb_unregister calls into the ndo_open/ndo_stop
functions.
This makes the LAPB protocol start/stop when the network interface
starts/stops. When the network interface is down, the LAPB protocol
shouldn't be running and the LAPB module shoudn't be generating control
frames.

2.
Move netif_start_queue/netif_stop_queue into the ndo_open/ndo_stop
functions.
This makes the TX queue start/stop when the network interface
starts/stops.
(netif_stop_queue was originally in the ndo_stop function. But to make
the code look better, I created a new function to use as ndo_stop, and
made it call the original ndo_stop function. I moved netif_stop_queue
from the original ndo_stop function to the new ndo_stop function.)

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: default avatarXie He <xie.he.0141@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed46cd1d
    • Maciej Żenczykowski's avatar
      net/ipv4: always honour route mtu during forwarding · 02a1b175
      Maciej Żenczykowski authored 
      Documentation/networking/ip-sysctl.txt:46 says:
  ip_forward_use_pmtu - BOOLEAN
    By default we don't trust protocol path MTUs while forwarding
    because they could be easily forged and can lead to unwanted
    fragmentation by the router.
    You only need to enable this if you have user-space software
    which tries to discover path mtus by itself and depends on the
    kernel honoring this information. This is normally not the case.
    Default: 0 (disabled)
    Possible values:
    0 - disabled
    1 - enabled

Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).

Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...

It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.

Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).

This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.

I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.
Signed-off-by: default avatarMaciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Sunmeet Gill (Sunny) <sgill@quicinc.com>
Cc: Vinay Paradkar <vparadka@qti.qualcomm.com>
Cc: Tyler Wear <twear@quicinc.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      02a1b175
    • David S. Miller's avatar
      Merge branch 'net_sched-fix-a-UAF-in-tcf_action_init' · 6d889996
      David S. Miller authored 
      Cong Wang says:

====================
net_sched: fix a UAF in tcf_action_init()

This patchset fixes a use-after-free triggered by syzbot. Please
find more details in each patch description.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d889996
    • Cong Wang's avatar
      net_sched: commit action insertions together · 0fedc63f
      Cong Wang authored 
      syzbot is able to trigger a failure case inside the loop in
tcf_action_init(), and when this happens we clean up with
tcf_action_destroy(). But, as these actions are already inserted
into the global IDR, other parallel process could free them
before tcf_action_destroy(), then we will trigger a use-after-free.

Fix this by deferring the insertions even later, after the loop,
and committing all the insertions in a separate loop, so we will
never fail in the middle of the insertions any more.

One side effect is that the window between alloction and final
insertion becomes larger, now it is more likely that the loop in
tcf_del_walker() sees the placeholder -EBUSY pointer. So we have
to check for error pointer in tcf_del_walker().

Reported-and-tested-by: syzbot+2287853d392e4b42374a@syzkaller.appspotmail.com
Fixes: 0190c1d4 ("net: sched: atomically check-allocate action")
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0fedc63f
    • Cong Wang's avatar
      net_sched: defer tcf_idr_insert() in tcf_action_init_1() · e49d8c22
      Cong Wang authored 
      All TC actions call tcf_idr_insert() for new action at the end
of their ->init(), so we can actually move it to a central place
in tcf_action_init_1().

And once the action is inserted into the global IDR, other parallel
process could free it immediately as its refcnt is still 1, so we can
not fail after this, we need to move it after the goto action
validation to avoid handling the failure case after insertion.

This is found during code review, is not directly triggered by syzbot.
And this prepares for the next patch.

Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e49d8c22
  9. 24 Sep, 2020 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7