This patch fixes some coding style issues. in r8192U_core.c
No logic is changed.
Signed-off-by: Patrik Kårlin <patrik.karlin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These calls are followed by calls to memcpy() on the same memory area, so they
can be safely removed.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is to get the comedi fixes, and resolve the issue in comdi_test.c
and comedi_fops.c that were caused by changes in both branches.

It also allows the fwserial driver changes to be applied, as they
required the fixes that are in staging-linus.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This solves runtime failures while trying to enable WDT3 related
functionality on firmware load, however it does affect other clocks
controlled by the driver. Seen on 3.8-rc1.

CCF provides clk_prepare and clk_unprepare for enable and disable
operations respectively, this needs to be called in the correct
order while handling clocks.

Code path to enable/disable dsp clocks can still be reached from an
atomic context, hence we can't use clk_prepare_enable and
clk_disable_unprepare yet.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit ff4ae5d9 (ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files)
resulted in a build breakage for tidspbridge driver.

   ...
   CC [M]  drivers/staging/tidspbridge/core/tiomap3430.o
   staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’:
   staging/tidspbridge/core/tiomap3430.c:550:24: error: ‘OMAP3430_CM_AUTOIDLE_PLL’
     undeclared (first use in this function)
   make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1
   ...

Fix this by including the appropriate header file.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit adds Kconfig entries for the following:

	1: ANDROID_BINDER_IPC
	2: ASHMEM (additional text)
	3: ANDROID_LOGGER

It also changes "Register" to "Registers" in
ANDROID_LOW_MEMORY_KILLER

Finally, all "help" instances are changed to "---help---",
as recommended by kconfig-language.txt in order to visually
aid developers.
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes two instances of
"static const char * array should probably be static const char * const"

I have seen other commits doing this in other files, so I am
assuming it should be done here as well.

Please tell me if this is wrong :)
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This changes the following:

1: BinderDriverReturnProtocol -> binder_driver_return_protocol
2: BinderDriverCommandProtocol -> binder_driver_return_protocol

These enums are not currently used, but still generate noise in checkpatch.

Well, did. They don't now :)
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch complains about some pointers that are dereferenced before being
checked:

drivers/staging/csr/sme_sys.c:285
CsrWifiRouterCtrlHipReqHandler() warn: variable dereferenced before
check 'priv' (see line 283)
drivers/staging/csr/sme_sys.c:1503
CsrWifiRouterMaPacketReqHandler() warn: variable dereferenced before
check 'priv' (see line 1501)
drivers/staging/csr/sme_sys.c:2062
CsrWifiRouterCtrlPeerDelReqHandler() warn: variable dereferenced before
check 'priv' (see line 2059)
drivers/staging/csr/sme_sys.c:2477
CsrWifiRouterCtrlPeerAddReqHandler() warn: variable dereferenced before
check 'priv' (see line 2474)
drivers/staging/csr/sme_sys.c:3045
CsrWifiRouterCtrlWapiRxPktReqHandler() warn: variable dereferenced
before check 'priv' (see line 3039)

We put the check before the dereferencing and prevent an oops and fix
the warning.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missing angle bracket before and after the URL.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The URL vmelinux.org is not accessible.
Change it to www.vmelinux.org.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In r8711_wx_get_wap(), make sure we do not call memcpy() on a memory area that
has just been zeroed by a call to memset().
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: fix error check in omap_thermal_expose_sensor() and in omap_thermal_register_cpu_cooling().

The omap_bandgap_get_sensor_data() function returns ERR_PTR(), so we need to use
IS_ERR() rather than a NULL check.
Signed-off-by: Cyril Roelandt <tipecaml@gmail.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of using the #ifdef'ery in the comedi_compat32.c and proc.c
files to include/exclude them from the comedi core, modify the Makefile
to include those files automatically when enabled in the .config.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Éric Piel reported a kernel oops in the "comedi_test" module.  It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).

This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command.  In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.

Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the
'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config
needs to also select 'COMEDI_FC'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org> # 3.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl style fixes:
- Broken license text into 80 char lines
- fixed two space before tab issues
- Removed unnecessary braces from if-else
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix lines over 80 characters and line up nearby comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to reduce the indentation in
`waveform_ai_interrupt()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Represent the fake samples as unsigned shorts instead of signed shorts,
as this is the usual Comedi convention.  There is no change to the
actual binary representation, although the `cfc_write_to_buffer()` call
currently expects a signed short for some bizarre reason.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the "comedi_test" module's acquisition timer function
`waveform_ai_interrupt()`, move the code for ending the acquisition
outside the scan loop.  Determine if the number of scans to be done is
sufficient to end the acquisition before entering the scan loop.  On
leaving the scan loop, set the `COMEDI_CB_EOA` event if the acquisition
is ending.  Only reschedule the timer if the acquisition is not ending.

Remove the somewhat useless `timer_running` flag from the private data.
This was intended to stop the timer function adding the timer back on
the timer queue periodically, but the flag setting wasn't synchronized
with the timer and we already use `del_timer_sync()` to synchronize
removal from the queue.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the "comedi_test" module, the timer function
`waveform_ai_interrupt()` doesn't need to remove the timer from the
timer queue as the caller has already removed it from the queue.  Remove
the call to `del_timer()` in this function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Éric Piel reported a kernel oops in the "comedi_test" module.  It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).

This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command.  In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.

Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a camel case issue.
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Store the 'index' for each comedi_subdevice when they are initially
allocated by comedi_alloc_subdevice(). This allows removing the
pointer math in comedi_fops.c which is used to figure out the
index that user space uses to access the individual subdevices.

Fix the ni_mio_common driver so it also uses the 'index' instead
of doing the pointer math.

Also, remove a couple unused macros in the pcmda12, pcmmio, and
pcmuio drivers which also do the pointer math to figure out the
index.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The hardware_device member of comedi_file_info is not set in this
function. Use kzalloc to make sure this pointer does not contain
invalid data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Change the (foo == NULL) tests to simply (!foo).

Use a local variable to hold a pointer to the async->buf_page_list[]
when doing the remap_pfn_range(). This cleans up the ugly line breaks
for the page_to_pfn(virt_to_page(...) operation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Flip the info->device tests so than the return NULL occurs last.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce, and use, a helper to check the subdevice runflags to see if
it is not in error and not running.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce, and use, a helper to check the subdevice runflags to see if
the SRF_ERROR flag is set.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice runflags are protected with a spin_lock. Only the comedi
core should be accessing them directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the helper function comedi_is_subdevice_running() instead of getting
the subdevice runflags and then masking the result.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function that checks the subdevice runflags to
see if the subdevice is running a command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, move this function so its near
comedi_set_subdevice_runflags().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As mentioned in CodingStyle, the prefered form is:

	p = kmalloc(sizeof(*p), ...);
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by the module_{init,exit} functions. For
aesthetic reasons, move it near them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, move the module_{init,exit} functions to the end
of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, move the MODULE_* information to the end of
the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>