Pull support for three new arm SoC types from Arnd Bergmann:

 - The mvebu platform includes Marvell's Armada XP and Armada 370 chips,
   made by the mvebu business unit inside of Marvell.  Since the same
   group also made the older but similar platforms we call "orion5x",
   "kirkwood", "mv78xx0" and "dove", we plan to move all of them into
   the mach-mvebu directory in the future.

 - socfpga is Altera's platform based on Cortex-A9 cores and a lot of
   FPGA space.  This is similar to the Xilinx zynq platform we already
   support.  The code is particularly clean, which is helped by the fact
   that the hardware doesn't do much besides the parts that are expected
   to get added in the FPGA.

 - The OMAP subarchitecture gains support for the latest generation, the
   OMAP5 based on the new Cortex-A15 core.  Support is rather
   rudimentary for now, but will be extended in the future.

* tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  ARM: socfpga: initial support for Altera's SOCFPGA platform
  arm: mvebu: generate DTBs for supported SoCs
  ARM: mvebu: MPIC: read number of interrupts from control register
  arm: mach-mvebu: add entry to MAINTAINERS
  arm: mach-mvebu: add compilation/configuration change
  arm: mach-mvebu: add defconfig
  arm: mach-mvebu: add documentation for new device tree bindings
  arm: mach-mvebu: add support for Armada 370 and Armada XP with DT
  arm: mach-mvebu: add source files
  arm: mach-mvebu: add header
  clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver
  ARM: Kconfig update to support additional GPIOs in OMAP5
  ARM: OMAP5: Add the build support
  arm/dts: OMAP5: Add omap5 dts files
  ARM: OMAP5: board-generic: Add device tree support
  ARM: omap2+: board-generic: clean up the irq data from board file
  ARM: OMAP5: Add SMP support
  ARM: OMAP5: Add the WakeupGen IP updates
  ARM: OMAP5: l3: Add l3 error handler support for omap5
  ARM: OMAP5: gpmc: Update gpmc_init()
  ...

Conflicts:
	Documentation/devicetree/bindings/arm/omap/omap.txt
	arch/arm/mach-omap2/Makefile
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile

Pull arm-soc cleanups, part 2, from Arnd Bergmann:
 "These omap cleanups have dependencies on earlier omap branches that in
  turn depend on other cleanups, so they could not go into the same
  branch."

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: sdrc: Fix the build break for OMAP4 only builds
  ARM: OMAP2+: dmtimer: cleanup fclk usage
  ARM: OMAP2+: Fix mismerge for omap_hwmod_get_main_clk() API
  ARM: OMAP2+: Remove unnecessary ifdef around __omap2_set_globals
  ARM: OMAP2+: am33xx: Change cpu_is_am33xx to soc_is_am33xx
  ARM: OMAP2+: am33xx: Make am33xx as a separate class
  ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c
  ARM: OMAP2+: All OMAP2PLUS uses omap-device.o target so add one entry
  ARM: OMAP: dmtimer: use devm_ API and do some cleanup in probe()
  ARM: OMAP2+: hwmod code: add support to set dmadisable in hwmod framework
  ARM: OMAP2+: PRM/CM: Move the stubbed prm and cm functions to prcm.c file and make them __weak
  ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API
  ARM: OMAP3+: dpll: optimize noncore dpll locking logic
  ARM: OMAP3: control: add definition for CONTROL_CAMERA_PHY_CTRL
  ARM: OMAP2+: powerdomain code: Fix Wake-up power domain power status
  ARM: OMAP4: clockdomain/CM code: Update supported transition modes
  ARM: OMAP3/4: omap_hwmod: Add rstst_offs field to struct omap_hwmod_omap4_prcm
  ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for am33xx

Pull arm-soc timer updates from Arnd Bergmann:
 "This contains two branches dealing with timers, one for the picoxcell
  platform that is now using DT with the platform-independent
  dw_apb_timer driver.  The other change is for the omap-specific
  dmtimer driver."

* tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  clocksource: dw_apb_timer: Add common DTS glue for dw_apb_timer
  ARM: OMAP2+: Simplify dmtimer clock aliases
  ARM: OMAP2+: Move dmtimer clock set function to dmtimer driver
  ARM: OMAP1: Fix dmtimer support
  ARM: OMAP: Add flag to indicate if a timer needs a manual reset
  ARM: OMAP: Remove timer function pointer for context loss counter
  ARM: OMAP: Remove loses_context variable from timer platform data
  ARM: OMAP2+: Fix external clock support for dmtimers
  ARM: OMAP2+: HWMOD: Correct timer device attributes
  ARM: OMAP: Add DMTIMER capability variable to represent timer features
  ARM: OMAP2+: Add dmtimer platform function to reserve systimers
  ARM: OMAP2+: Remove unused max number of timers definition
  ARM: OMAP: Remove unnecessary clk structure

Pull arm-soc spi updates from Arnd Bergmann:
 "These changes conceptually belong into the spi tree, but we decided to
  put them into arm-soc to better deal with interdependencies with other
  platform specific patches that are already there."

* tag 'spi' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  spi/s3c64xx: Expand S3C64XX_SPI_{DE,}ACT macros at call sites
  spi/s3c64xx: Convert to devm_request_and_ioremap()
  spi/s3c64xx: Put the /CS GPIO into output mode
  spi/s3c64xx: Fix handling of errors in gpio_request()

Pull arm-soc device tree description updates from Arnd Bergmann:
 "This branch contains two kinds of updates: Some platforms in the
  process of getting converted to device tree based booting, and the
  platform specific patches necessary for that are included here.

  Other platforms are already converted, so we just need to update the
  actual device tree source files and the binding documents to add
  support for new board and new drivers.

  In the future we will probably separate those into two branches, and
  in the long run, the plan is to move the device tree source files out
  of the kernel repository, but that has to wait until we have completed
  a much larger portion of the binding documents."

Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly
added clkdev registers next to a few removed unnecessary ones.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: LPC32xx: Add PWM to base dts file
  ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5
  ARM: EXYNOS: Add spi clock support for EXYNOS5
  ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms
  ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4
  ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock
  ARM: ux500: Remove PMU platform registration when booting with DT
  ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure
  ARM: ux500: Ensure vendor specific properties have the vendor's identifier
  pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes
  ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled
  ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices
  ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree
  ARM: ux500: Apply ab8500-debug node do the db8500 DT structure
  ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices
  ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm
  ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl
  ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT
  ...

Pull samsung arm-soc dma changes from Arnd Bergmann:
 "Some platforms are not yet converted to use the dmaengine framework,
  including some of the samsung SoCs.  In the meantime, we treat this as
  platform code and merge the patches through the arm-soc tree."

* tag 'dma' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: SAMSUNG: Fix compiler warning in dma-ops.c file
  ASoC: follow the updated samsung DMA common operations
  spi/s3c64xx: Add the use of DMA config operation
  ARM: SAMSUNG: Add config() function in DMA common operations

Pull arm soc-specific updates from Arnd Bergmann:
 "This is stuff that does not fit well into another category and in
  particular is not related to a particular board.  The largest part in
  here is extending the am33xx support in the omap platform."

Fix up trivial conflicts in arch/arm/mach-{imx/mach-mx35_3ds.c, tegra/Makefile}

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
  ARM: LPC32xx: Add PWM support
  ARM: LPC32xx: Add PWM clock
  ARM: LPC32xx: Set system serial based on cpu unique id
  ARM: vexpress: Config option for early printk console
  ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile
  ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses
  ARM: vexpress: Add fixed regulator for SMSC
  ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files
  ARM: vexpress: Initial common clock support
  ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk API
  ARM: EXYNOS: Add missing static storage class specifier in pmu.c file
  ARM: EXYNOS: Make combiner_init function static
  ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12
  ARM: versatile: Make plat-versatile clock optional
  ARM: vexpress: Check master site in daughterboard's sysctl operations
  ARM: vexpress: remove automatic errata workaround selection
  ARM: LPC32xx: Adjust to pl08x DMA interface changes
  ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset
  ARM: imx: fix mx51 ehci setup errors
  ARM: imx: make ehci power/oc polarities configurable
  ...

Pull general arm-soc cleanups from Arnd Bergmann:
 "These are all boring changes, moving stuff around or renaming things
  mostly, and also getting rid of stuff that is duplicate or should not
  be there to start with.  Platform-wise this is all over the place,
  mainly omap, samsung, at91, imx and tegra."

Resolve trivial conflict in arch/arm/mach-omap2/clockdomains3xxx_data.c

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  ARM: clps711x: Remove the setting of the time
  ARM: clps711x: Removed superfluous transform virt_to_bus and related functions
  ARM: clps711x/p720t: Replace __initcall by .init_early call
  ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board
  ARM: S3C24XX: Remove unused GPIO definitions for port J
  ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases
  ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API
  ARM: S3C24XX: Convert the PM code to gpiolib API
  ARM: S3C24XX: Convert QT2410 board file to the gpiolib API
  ARM: S3C24XX: Convert SMDK board file to the gpiolib API
  ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code
  ARM: imx: remove unused pdata from device macros
  ARM: imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX_SSI from MACH_MX25_3DS
  ARM: at91: fix new build errors
  ARM: at91: add AIC5 support
  ARM: at91: remove mach/irqs.h
  ARM: at91: sparse irq support
  ARM: at91: at91 based machines specify their own irq handler at run time
  ARM: at91: remove static irq priorities for sam9x5
  ARM: at91: add of irq priorities support
  ...

Pull non-critical arm-soc bug fixes from Arnd Bergmann:
 "These were submitted as bug fixes before v3.5 but not considered
  important enough to be included in it."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM:vt8500: Convert to use .restart and remove arch_reset()
  ARM: davinci: da8xx: fix interrupt handling
  ARM: OMAP2+: fix CONFIG_CPU_IDLE dependency on CONFIG_PM
  ARM: mxs/tx28: fix odd include
  ARM: OMAP: remove unused cpu detection macros
  ARM: OMAP: fix typos related to OMAP330
  ARM: OMAP7XX:  Remove omap730.h and omap850.h
  ARM: OMAP2+: fix naming collision of variable nr_irqs
  ARM: OMAP: omap2plus_defconfig: Enable EXT4 support
  ARM: OMAP depends on MMU
  arm: omap3: am35x: Set proper powerdomain states
  ARM: OMAP AM35x: clockdomain data: Fix clockdomain dependencies
  ARM: OMAP AM35x: EMAC/MDIO integration: Add Davinci EMAC/MDIO hwmod support
  ARM: OMAP: AM35xx: fix UART4 softreset
  ARM: OMAP AM35xx: clock and hwmod data: fix UART4 data
  ARM: OMAP AM35xx: clock and hwmod data: fix AM35xx HSOTGUSB hwmod
  ARM: OMAP: Fix dts files w/ status property: "disable" -> "disabled"
  ARM: OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED
  ARM: OMAP2: twl-common: Fix compiler warning
  ARM: OMAP: fix the ads7846 init code
  ...

Pull UBI changes from Artem Bityutskiy:
 "Change the default amount of eraseblocks which UBI reserves for bad
  block handling from 1% to 2%, because 1% does not meet most modern
  flash requirements.  1% was good enough in the past for old
  high-quality SLCs, but nowadays 2% is much more appropriate.:

Other changes are clean-ups.

* tag 'upstream-3.6-rc1' of git://git.infradead.org/linux-ubi:
  UBI: harmonize the update of ubi->beb_rsvd_pebs
  UBI: trivial: fix comment of ubi_calculate_reserved function
  UBI: fix spelling of detach in debug output
  UBI: Change the default percentage of reserved PEB

Pull UBIFS updates from Artem Bityutskiy:

 - Added another debugfs knob for forcing UBIFS R/O mode without
   flushing caches or finishing commit or any other I/O operation.  I've
   originally added this knob in order to reproduce the free space fixup
   bug (see commit c6727932: "UBIFS: fix a bug in empty space
   fix-up") on nandsim.

   Without this knob I would have to do real power-cuts, which would
   make debugging much harder.  Then I've decided to keep this knob
   because it is also useful for UBIFS power-cut recovery end
   error-paths testing.

 - Well-spotted fix from Julia.  This bug did not cause real troubles
   for UBIFS, but nevertheless it could cause issues for someone trying
   to modify the orphans handling code.  Kudos to coccinelle!

 - Minor cleanups.

* tag 'upstream-3.6-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: remove invalid reference to list iterator variable
  UBIFS: simplify reply code a bit
  UBIFS: add debugfs knob to switch to R/O mode
  UBIFS: fix compilation warning

The only checks of the long argument passed to fcntl(fd,F_SETLEASE,.)
are done after converting the long to an int.  Thus some illegal values
may be let through and cause problems in later code.

[ They actually *don't* cause problems in mainline, as of Dave Jones's
  commit 8d657eb3 "Remove easily user-triggerable BUG from
  generic_setlease", but we should fix this anyway.  And this patch will
  be necessary to fix real bugs on earlier kernels. ]

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull the big VFS changes from Al Viro:
 "This one is *big* and changes quite a few things around VFS.  What's in there:

   - the first of two really major architecture changes - death to open
     intents.

     The former is finally there; it was very long in making, but with
     Miklos getting through really hard and messy final push in
     fs/namei.c, we finally have it.  Unlike his variant, this one
     doesn't introduce struct opendata; what we have instead is
     ->atomic_open() taking preallocated struct file * and passing
     everything via its fields.

     Instead of returning struct file *, it returns -E...  on error, 0
     on success and 1 in "deal with it yourself" case (e.g.  symlink
     found on server, etc.).

     See comments before fs/namei.c:atomic_open().  That made a lot of
     goodies finally possible and quite a few are in that pile:
     ->lookup(), ->d_revalidate() and ->create() do not get struct
     nameidata * anymore; ->lookup() and ->d_revalidate() get lookup
     flags instead, ->create() gets "do we want it exclusive" flag.

     With the introduction of new helper (kern_path_locked()) we are rid
     of all struct nameidata instances outside of fs/namei.c; it's still
     visible in namei.h, but not for long.  Come the next cycle,
     declaration will move either to fs/internal.h or to fs/namei.c
     itself.  [me, miklos, hch]

   - The second major change: behaviour of final fput().  Now we have
     __fput() done without any locks held by caller *and* not from deep
     in call stack.

     That obviously lifts a lot of constraints on the locking in there.
     Moreover, it's legal now to call fput() from atomic contexts (which
     has immediately simplified life for aio.c).  We also don't need
     anti-recursion logics in __scm_destroy() anymore.

     There is a price, though - the damn thing has become partially
     asynchronous.  For fput() from normal process we are guaranteed
     that pending __fput() will be done before the caller returns to
     userland, exits or gets stopped for ptrace.

     For kernel threads and atomic contexts it's done via
     schedule_work(), so theoretically we might need a way to make sure
     it's finished; so far only one such place had been found, but there
     might be more.

     There's flush_delayed_fput() (do all pending __fput()) and there's
     __fput_sync() (fput() analog doing __fput() immediately).  I hope
     we won't need them often; see warnings in fs/file_table.c for
     details.  [me, based on task_work series from Oleg merged last
     cycle]

   - sync series from Jan

   - large part of "death to sync_supers()" work from Artem; the only
     bits missing here are exofs and ext4 ones.  As far as I understand,
     those are going via the exofs and ext4 trees resp.; once they are
     in, we can put ->write_super() to the rest, along with the thread
     calling it.

   - preparatory bits from unionmount series (from dhowells).

   - assorted cleanups and fixes all over the place, as usual.

  This is not the last pile for this cycle; there's at least jlayton's
  ESTALE work and fsfreeze series (the latter - in dire need of fixes,
  so I'm not sure it'll make the cut this cycle).  I'll probably throw
  symlink/hardlink restrictions stuff from Kees into the next pile, too.
  Plus there's a lot of misc patches I hadn't thrown into that one -
  it's large enough as it is..."

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits)
  ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file()
  btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file()
  switch dentry_open() to struct path, make it grab references itself
  spufs: shift dget/mntget towards dentry_open()
  zoran: don't bother with struct file * in zoran_map
  ecryptfs: don't reinvent the wheels, please - use struct completion
  don't expose I_NEW inodes via dentry->d_inode
  tidy up namei.c a bit
  unobfuscate follow_up() a bit
  ext3: pass custom EOF to generic_file_llseek_size()
  ext4: use core vfs llseek code for dir seeks
  vfs: allow custom EOF in generic_file_llseek code
  vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes
  vfs: Remove unnecessary flushing of block devices
  vfs: Make sys_sync writeout also block device inodes
  vfs: Create function for iterating over block devices
  vfs: Reorder operations during sys_sync
  quota: Move quota syncing to ->sync_fs method
  quota: Split dquot_quota_sync() to writeback and cache flushing part
  vfs: Move noop_backing_dev_info check from sync into writeback
  ...

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.6:

  Core:
   - Rename cd-gpio to slot-gpio and extend it to support more slot GPIO
     functions, such as write-protect.
   - Add a function to get regulators (Vdd and Vccq) for a host.

  Drivers:
   - sdhci-pxav2, sdhci-pxav3: Add device tree support.
   - sdhi: Add device tree support.
   - sh_mmcif: Add support for regulators, device tree, slot-gpio.
   - tmio: Add regulator support, use slot-gpio."

* tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (62 commits)
  mmc: sdhci-dove: Prepare for common clock framework
  mmc: sdhci-dove: Add SDHCI_QUIRK_NO_HISPD_BIT
  mmc: omap_hsmmc: ensure probe returns error upon resource failure
  mmc: mxs-mmc: Add wp-inverted property
  mmc: esdhc: Fix DMA_MASK to not break mx25 DMA access
  mmc: core: reset signal voltage on power up
  mmc: sd: Fix sd current limit setting
  mmc: omap_hsmmc: add clk_prepare and clk_unprepare
  mmc: sdhci: When a UHS switch fails, cycle power if regulator is used
  mmc: atmel-mci: modify CLKDIV displaying in debugfs
  mmc: atmel-mci: fix incorrect setting of host->data to NULL
  mmc: sdhci: poll for card even when card is logically unremovable
  mmc: sdhci: Introduce new flag SDHCI_USING_RETUNING_TIMER
  mmc: sdio: Change pr_warning to pr_warn_ratelimited
  mmc: core: Simplify and fix for SD switch processing
  mmc: sdhci: restore host settings when card is removed
  mmc: sdhci: fix incorrect command used in tuning
  mmc: sdhci-pci: CaFe has broken card detection
  mmc: sdhci: Report failure reasons for all cases in sdhci_add_host()
  mmc: s3cmci: Convert s3cmci driver to gpiolib API
  ...

Pull x86/mce changes from Ingo Molnar:
 "This tree improves the AMD thresholding bank code and includes a
  memory fault signal handling fixlet."

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix siginfo_t->si_addr value for non-recoverable memory faults
  x86, MCE, AMD: Update copyrights and boilerplate
  x86, MCE, AMD: Give proper names to the thresholding banks
  x86, MCE, AMD: Make error_count read only
  x86, MCE, AMD: Cleanup reading of error_count
  x86, MCE, AMD: Print decimal thresholding values
  x86, MCE, AMD: Move shared bank to node descriptor
  x86, MCE, AMD: Remove local_allocate_... wrapper
  x86, MCE, AMD: Remove shared banks sysfs linking
  x86, amd_nb: Export model 0x10 and later PCI id

As mach-dove is moving towards common clock framework prepare
the sdhci driver to grab its clock.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

The sdio controller on dove doesn't have a bit to indicate
high-speed. With the quirk set it fixes accessing high-speed
sdcards.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

If platform_get_resource_by_name() fails, driver probe is aborted an
should return an error so the driver is not bound to the device.

However, in the current error path of platform_get_resource_by_name(),
probe returns zero since the return value (ret) is not properly set.
With a zero return value, the driver core assumes probe was successful
and will bind the driver to the device.

Fix this by ensuring that probe returns an error code in this failure
path.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Acked-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

The write-protect GPIO is inverted on some boards. Handle such case.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

Patch to not set reserved bits in i.MX25 PROCTL register.  DMA stops
working if those bits get set.
Signed-off-by: Wilson Callan <wilson.callan@savantsystems.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

Pull power management updates from Rafael Wysocki:

 - ACPI conversion to PM handling based on struct dev_pm_ops.
 - Conversion of a number of platform drivers to PM handling based on
   struct dev_pm_ops and removal of empty legacy PM callbacks from a
   couple of PCI drivers.
 - Suspend-to-both for in-kernel hibernation from Bojan Smojver.
 - cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti
   Murthy.
 - cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
 - Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross.
 - Generic PM domains framework updates.
 - RTC CMOS wakeup signaling update from Paul Fox.
 - sparse warnings fixes from Sachin Kamat.
 - Build warnings fixes for the generic PM domains framework and PM
   sysfs code.
 - sysfs switch for printing device suspend times from Sameer Nanda.
 - Documentation fix from Oskar Schirmer.

* tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
  cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch
  EXYNOS: bugfix on retrieving old_index from freqs.old
  PM / Sleep: call early resume handlers when suspend_noirq fails
  PM / QoS: Use NULL pointer instead of plain integer in qos.c
  PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
  PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock
  PM / Sleep: Add missing static storage class specifiers in main.c
  cpuilde / ACPI: remove time from acpi_processor_cx structure
  cpuidle / ACPI: remove usage from acpi_processor_cx structure
  cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure
  rtc-cmos: report wakeups from interrupt handler
  PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
  PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
  olpc-xo15-sci: Use struct dev_pm_ops for power management
  PM / Domains: Replace plain integer with NULL pointer in domain.c file
  PM / Domains: Add missing static storage class specifier in domain.c file
  PM / crypto / ux500: Use struct dev_pm_ops for power management
  PM / IPMI: Remove empty legacy PCI PM callbacks
  tpm_nsc: Use struct dev_pm_ops for power management
  tpm_tis: Use struct dev_pm_ops for power management
  ...

Pull target updates from Nicholas Bellinger:
 "There have been lots of work in a number of areas this past round.
  The highlights include:

   - Break out target_core_cdb.c emulation into SPC/SBC ops (hch)
   - Add a parse_cdb method to target backend drivers (hch)
   - Move sync_cache + write_same + unmap into spc_ops (hch)
   - Use target_execute_cmd for WRITEs in iscsi_target + srpt (hch)
   - Offload WRITE I/O backend submission in tcm_qla2xxx + tcm_fc (hch +
     nab)
   - Refactor core_update_device_list_for_node() into enable/disable
     funcs (agrover)
   - Replace the TCM processing thread with a TMR work queue (hch)
   - Fix regression in transport_add_device_to_core_hba from TMR
     conversion (DanC)
   - Remove racy, now-redundant check of sess_tearing_down with qla2xxx
     (roland)
   - Add range checking, fix reading of data len + possible underflow in
     UNMAP (roland)
   - Allow for target_submit_cmd() returning errors + convert fabrics
     (roland + nab)
   - Drop bogus struct file usage for iSCSI/SCTP (viro)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (54 commits)
  iscsi-target: Drop bogus struct file usage for iSCSI/SCTP
  target: NULL dereference on error path
  target: Allow for target_submit_cmd() returning errors
  target: Check number of unmap descriptors against our limit
  target: Fix possible integer underflow in UNMAP emulation
  target: Fix reading of data length fields for UNMAP commands
  target: Add range checking to UNMAP emulation
  target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGE
  target: Make unnecessarily global se_dev_align_max_sectors() static
  target: Remove se_session.sess_wait_list
  qla2xxx: Remove racy, now-redundant check of sess_tearing_down
  target: Check sess_tearing_down in target_get_sess_cmd()
  sbp-target: Consolidate duplicated error path code in sbp_handle_command()
  target: Un-export target_get_sess_cmd()
  qla2xxx: Get rid of redundant qla_tgt_sess.tearing_down
  target: Make core_disable_device_list_for_node use pre-refactoring lock ordering
  target: refactor core_update_device_list_for_node()
  target: Eliminate else using boolean logic
  target: Misc retval cleanups
  target: Remove hba param from core_dev_add_lun
  ...

Pull regulator updates from Mark Brown:
 "Lots and lots of fixes from Axel and some others here, plus some
  framework enhancements which continue the theme of factoring code out
  of the drivers and into the core.

   - Initial framework support for GPIO controlled enable signals,
     saving a bunch of code in drivers.
   - Move fixed regulator enable time and voltage mapping table
     specifications to data.
   - Used some of the recent framework enhancements to make voltage
     change notifications more useful, passing the voltage in as an
     argument to the notification.
   - Fixed the pattern used for finding individual regulators on a
     device to not rely on the node name, supporting the use of multiple
     PMICs of the same type in the system.
   - New drivers for Maxim MAX77686, TI LP872x and LP8788, Samsung
     S2MPS11, and Wolfson Arizona microphone supplies and LDOs."

* tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (176 commits)
  regulator: add new lp8788 regulator driver
  regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulator
  regulator: tps65910: set input_supply on desc unconditionally
  regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps
  regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data()
  regulator: twl: Fix list_voltate for twl6030ldo_ops
  regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_sel
  regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo
  regulator: s5m8767: Properly handle gpio_request failure
  regulator: max8997: Properly handle gpio_request failure
  regulator: tps62360: use devm_* for gpio request
  regulator: tps6586x: add support for input supply
  regulator: tps65217: Add device tree support
  regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator
  regulator: aat2870: Convert to regulator_list_voltage_table
  regulator: da9052: initialize of_node param for regulator register
  regulator: Add REGULATOR_STATUS_UNDEFINED.
  regulator: Fix a typo in regulator_mode_to_status() core function.
  regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask is 0xff
  regulator: s2mps11: Fix wrong setting for config.dev
  ...

Pull regmap updates from Mark Brown:
 "A few fixes plus a few features, the most generally useful thing being
  the register paging support which can be used by quite a few devices:

   - Support for wake IRQs in regmap-irq
   - Support for register paging
   - Support for explicitly specified endianness, mostly for MMIO."

* tag 'regmap-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix incorrect arguments to kzalloc() call
  regmap: Add hook for printk logging for debugging during early init
  regmap: Fix work_buf switching for page update during virtual range access.
  regmap: Add support for register indirect addressing.
  regmap: Move lock out from internal function _regmap_update_bits().
  regmap: mmio: Staticize regmap_mmio_gen_context()
  regmap: Remove warning on stubbed dev_get_regmap()
  regmap: Implement support for wake IRQs
  regmap: Don't try to map non-existant IRQs
  regmap: Constify regmap_irq_chip
  regmap: mmio: request native endian formatting
  regmap: allow busses to request formatting with specific endianness

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

all we need it for is file->private_data, which is assign-once, already
assigned by that point and, incidentally, its value is already in use
by zoran ->mmap() anyway.  So just store that pointer instead...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and keep the sodding requests on stack - they are small enough.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

	d_instantiate(dentry, inode);
	unlock_new_inode(inode);

is a bad idea; do it the other way round...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

locking/unlocking for rcu walk taken to a couple of inline helpers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

really convoluted test in there has grown up during struct mount
introduction; what it checks is that we'd reached the root of
mount tree.

Use the new custom EOF argument to generic_file_llseek_size so
that SEEK_END will go to the max hash value for htree dirs
in ext3 rather than to i_size_read()
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use the new functionality in generic_file_llseek_size() to
accept a custom EOF position, and un-cut-and-paste all the
vfs llseek code from ext4.

Also fix up comments on ext4_llseek() to reflect reality.
Signed-off-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

For ext3/4 htree directories, using the vfs llseek function with
SEEK_END goes to i_size like for any other file, but in reality
we want the maximum possible hash value.  Recent changes
in ext4 have cut & pasted generic_file_llseek() back into fs/ext4/dir.c,
but replicating this core code seems like a bad idea, especially
since the copy has already diverged from the vfs.

This patch updates generic_file_llseek_size to accept
both a custom maximum offset, and a custom EOF position.  With this
in place, ext4_dir_llseek can pass in the appropriate maximum hash
position for both maxsize and eof, and get what it wants.

As far as I know, this does not fix any bugs - nfs in the kernel
doesn't use SEEK_END, and I don't know of any user who does.  But
some ext4 folks seem keen on doing the right thing here, and I can't
really argue.

(Patch also fixes up some comments slightly)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

wakeup_flusher_threads(0) will queue work doing complete writeback for each
flusher thread. Thus there is not much point in submitting another work doing
full inode WB_SYNC_NONE writeback by writeback_inodes_sb().

After this change it does not make sense to call nonblocking ->sync_fs and
block device flush before calling sync_inodes_sb() because
wakeup_flusher_threads() is completely asynchronous and thus these functions
would be called in parallel with inode writeback running which will effectively
void any work they do. So we move sync_inodes_sb() call before these two
functions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

It is not necessary to write block devices twice. The reason why we first did
flush and then proper sync is that
  for_each_bdev() {
    write_bdev()
    wait_for_completion()
  }
is much slower than
  for_each_bdev()
    write_bdev()
  for_each_bdev()
    wait_for_completion()
when there is bigger amount of data. But as is seen in the above, there's no real
need to scan pages and submit them twice. We just need to separate the submission
and waiting part. This patch does that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In case block device does not have filesystem mounted on it, sys_sync will just
ignore it and doesn't writeout its dirty pages. This is because writeback code
avoids writing inodes from superblock without backing device and
blockdev_superblock is such a superblock.  Since it's unexpected that sync
doesn't writeout dirty data for block devices be nice to users and change the
behavior to do so. So now we iterate over all block devices on blockdev_super
instead of iterating over all superblocks when syncing block devices.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>