It looks like cmtp_session has same pattern as the issue reported in
old rfcomm:

	while (1) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (condition)
			break;
		// may call might_sleep here
		schedule();
	}
	__set_current_state(TASK_RUNNING);

Which fixed at:
	dfb2fae7 Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: AL Yu-Chen Cho <acho@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

It looks like bnep_session has same pattern as the issue reported in
old rfcomm:

	while (1) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (condition)
			break;
		// may call might_sleep here
		schedule();
	}
	__set_current_state(TASK_RUNNING);

Which fixed at:
	dfb2fae7 Bluetooth: Fix nested sleeps

So let's fix it at the same way, also follow the suggestion of:
https://lwn.net/Articles/628628/Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: AL Yu-Chen Cho <acho@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The hci_bcm proto is able to operate without bcm platform device linked
to its uart port. In that case, firmware can be applied, but there is
no power operation (no gpio/irq resources mgmt).

However, the current implementation breaks this use case because of
reporting a ENODEV error in the bcm setup procedure if bcm_request_irq
fails (which is the case if no bcm device linked).

Fix this by removing bcm_request_irq error forwarding.
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Reported-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The structure hci_serdev_client_ops does not need to be in global scope
and is not modified, so make it static.

Cleans up sparse warning:
"symbol 'hci_serdev_client_ops' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

very similar to commit dd99e425 ("udp: prefetch
rmem_alloc in udp_queue_rcv_skb()"), this allows saving a cache
miss when the BH is bottle-neck for UDP over ipv6 packet
processing, e.g. for small packets when a single RX NIC ingress
queue is in use.

Performances under flood when multiple NIC RX queues used are
unaffected, but when a single NIC rx queue is in use, this
gives ~8% performance improvement.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Petazzoni says:

====================
net: mvpp2: misc improvements

Here are a few patches making various small improvements/refactoring
in the mvpp2 driver. They are based on today's net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When all a function does is calling another function with the exact same
arguments, in the exact same order, you know it's time to remove said
function. Which is exactly what this commit does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is not used in the driver, remove it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A previous commit modified a number of smp_processor_id() used in
migration-enabled contexts into get_cpu/put_cpu sections. However, a few
smp_processor_id() calls remain in the driver, and this commit adds
comments explaining why they can be kept.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jan Kiszka says:

====================
stmmac: pci: Refactor DMI probing

Some cleanups of the way we probe DMI platforms in the driver. Reduces
a bit of open-coding and makes the logic easier reusable for any
potential DMI platform != Quark.

Tested on IOT2000 and Galileo Gen2.

Changes in v5:
 - fixed a remaining issue in patch 5
 - dropped patch 6 for now
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoids reimplementation of DMI matching in stmmac_pci_find_phy_addr.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No need to carry this reference in stmmac_pci_info - the Quark-specific
setup handler knows that it needs to use the Quark-specific DMI table.
This also allows to drop the stmmac_pci_info reference from the setup
handler parameter list.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the special case for the early Galileo firmware into
quark_default_setup. This allows to use stmmac_pci_find_phy_addr for
non-quark cases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make stmmac_default_data compatible with stmmac_pci_info.setup and use
an info structure for all devices. This allows to make the probing more
regular.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By removing the PCI device reference from the structure and passing it
as parameters to the interested functions, we can make quark_pci_info
const.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the VF NIC is opened, the synthetic NIC's carrier state is set to
off. This tells the host to transitions data path to the VF device. But
if startup script or user manipulates the admin state of the netvsc
device directly for example:
        # ifconfig eth0 down
	# ifconfig eth0 up
Then the carrier state of the synthetic NIC would be on, even though the
data path was still over the VF NIC. This patch sets the carrier state
of synthetic NIC with consideration of the related VF state.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We simply use rndis_device->link_state in the netdev_dbg. The variable,
link_state from struct netvsc_device_info, is not used anywhere else.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tracex5_kern.c build failed with the following error message:
  ../samples/bpf/tracex5_kern.c:12:10: fatal error: 'syscall_nrs.h' file not found
  #include "syscall_nrs.h"
The generated file syscall_nrs.h is put in build/samples/bpf directory,
but this directory is not in include path, hence build failed.

The fix is to add $(obj) into the clang compilation path.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
rds: tcp: fixes

Patch1 is a bug fix for correct reconnect when a connection
is restarted. Patch 2 accelerates cleanup by setting linger
to 1 and sending a RST to the peer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If we are unloading the rds_tcp module, we can set linger to 1
and drop pending packets to accelerate reconnect. The peer will
end up resetting the connection based on new generation numbers
of the new incarnation, so hanging on to unsent TCP packets via
linger is mostly pointless in this case.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: Jenny Xu <jenny.x.xu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RDS handshake ping probe added by commit 5916e2c1
("RDS: TCP: Enable multipath RDS for TCP") is sent from rds_sendmsg()
before the first data packet is sent to a peer. If the conversation
is not bidirectional  (i.e., one side is always passive and never
invokes rds_sendmsg()) and the passive side restarts its rds_tcp
module, a new HS ping probe needs to be sent, so that the number
of paths can be re-established.

This patch achieves that by sending a HS ping probe from
rds_tcp_accept_one() when c_npaths is 0 (i.e., we have not done
a handshake probe with this peer yet).
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: Jenny Xu <jenny.x.xu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The update to ibmvnic_init to allow an EAGAIN return code broke
the calling of ibmvnic_init from ibmvnic_probe. The code now
will return from this point in the probe routine if anything
other than EAGAIN is returned. The check should be to see if rc
is non-zero and not equal to EAGAIN.

Without this fix, the vNIC driver can return 0 (success) from
its probe routine due to ibmvnic_init returning zero, but before
completing the probe process and registering with the netdev layer.

Fixes: 6a2fb0e9 (ibmvnic: driver initialization for kdump/kexec)
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Falcon says:

====================
ibmvnic: Correct long-term-mapped buffer error handling

This patch set fixes the error-handling of long-term-mapped buffers
during adapter initialization and reset. The first patch fixes a bug
in an incorrectly defined descriptor that was keeping the return
codes from the VIO server from being properly checked. The second patch
fixes and cleans up the error-handling implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch stores the return code of the REQUEST_MAP_RSP sub-CRQ command
in the private data structure, where it can be later checked during
device open or a reset.

In the case of a reset, the mapping request to the vNIC Server may fail,
especially in the case of a partition migration. The driver attempts to
handle this by re-allocating the buffer and re-sending the mapping request.

The original error handling implementation was removed. The separate
function handling the REQUEST_MAP response message was also removed,
since it is now simple enough to be handled in the ibmvnic_handle_crq
function.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reserved area should be eight bytes in length instead of four.
As a result, the return codes in the REQUEST_MAP_RSP descriptors
were not being properly handled.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently in both ipv4 and ipv6 code path, the ack packet received when
sk at TCP_NEW_SYN_RECV state is not filtered by socket filter or cgroup
filter since it is handled from tcp_child_process and never reaches the
tcp_filter inside tcp_v4_rcv or tcp_v6_rcv. Adding a tcp_filter hooks
here can make sure all the ingress tcp packet can be correctly filtered.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The memcpy annotation triggers for a fixed-length buffer copy:

In file included from /git/arm-soc/arch/arm64/include/asm/processor.h:30:0,
                 from /git/arm-soc/arch/arm64/include/asm/spinlock.h:21,
                 from /git/arm-soc/include/linux/spinlock.h:87,
                 from /git/arm-soc/include/linux/seqlock.h:35,
                 from /git/arm-soc/include/linux/time.h:5,
                 from /git/arm-soc/include/linux/stat.h:21,
                 from /git/arm-soc/include/linux/module.h:10,
                 from /git/arm-soc/drivers/net/phy/smsc.c:20:
In function 'memcpy',
    inlined from 'smsc_get_strings' at /git/arm-soc/drivers/net/phy/smsc.c:166:3:
/git/arm-soc/include/linux/string.h:309:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter

Using strncpy instead of memcpy should do the right thing here.

Fixes: 030a8902 ("net: phy: smsc: Implement PHY statistics")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use Mellanox device ID definitions in the driver's mlx5 ID table so tools
such as 'grep' and 'cscope' can be used to help find correlated material
(such as INTx Masking quirks: d76d2fe0 PCI: Convert Mellanox broken
INTx quirks to be for listed devices only).

No functional change intended.
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only compile-tested - I don't have the hardware.

>From code inspection, octeon_pci_write_core_mem() appears to be safe wrt
unaligned source. In any case, u8 fbuf[] was not guaranteed to be aligned
anyway.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Felix Manlunas <felix.manlunas@cavium.com>
CC: Prasad Kanneganti <prasad.kanneganti@cavium.com>
CC: Derek Chickles <derek.chickles@cavium.com>
CC: David Miller <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix refcounting wrt timers which hold onto inet6 address objects,
    from Xin Long.

 2) Fix an ancient bug in wireless wext ioctls, from Johannes Berg.

 3) Firmware handling fixes in brcm80211 driver, from Arend Van Spriel.

 4) Several mlx5 driver fixes (firmware readiness, timestamp cap
    reporting, devlink command validity checking, tc offloading, etc.)
    From Eli Cohen, Maor Dickman, Chris Mi, and Or Gerlitz.

 5) Fix dst leak in IP/IP6 tunnels, from Haishuang Yan.

 6) Fix dst refcount bug in decnet, from Wei Wang.

 7) Netdev can be double freed in register_vlan_device(). Fix from Gao
    Feng.

 8) Don't allow object to be destroyed while it is being dumped in SCTP,
    from Xin Long.

 9) Fix dpaa_eth build when modular, from Madalin Bucur.

10) Fix throw route leaks, from Serhey Popovych.

11) IFLA_GROUP missing from if_nlmsg_size() and ifla_policy[] table,
    also from Serhey Popovych.

12) Fix premature TX SKB free in stmmac, from Niklas Cassel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  igmp: add a missing spin_lock_init()
  net: stmmac: free an skb first when there are no longer any descriptors using it
  sfc: remove duplicate up_write on VF filter_sem
  rtnetlink: add IFLA_GROUP to ifla_policy
  ipv6: Do not leak throw route references
  dt-bindings: net: sms911x: Add missing optional VDD regulators
  dpaa_eth: reuse the dma_ops provided by the FMan MAC device
  fsl/fman: propagate dma_ops
  net/core: remove explicit do_softirq() from busy_poll_stop()
  fib_rules: Resolve goto rules target on delete
  sctp: ensure ep is not destroyed before doing the dump
  net/hns:bugfix of ethtool -t phy self_test
  net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
  cxgb4: notify uP to route ctrlq compl to rdma rspq
  ip6_tunnel: Correct tos value in collect_md mode
  decnet: always not take dst->__refcnt when inserting dst into hash table
  ip6_tunnel: fix potential issue in __ip6_tnl_rcv
  ip_tunnel: fix potential issue in ip_tunnel_rcv
  brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()
  net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it
  ...

Michal Kalderon says:

====================
qed*: File split and rename towards iWARP support

This patch series makes a few more infrastructure changes towards adding
iWARP support. Hopefully this is the last infrastructure change
prior to the iWARP RFC.

Patch #1-3 take care of taking all the common iWARP/RoCE code out of
qed_roce.[ch] and placing it in qed_rdma.[ch]
Patch #4 renames the roce interface file as it is common for
RoCE and iWARP. This patch touches qedr as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename the qed_roce_if file to qed_rdma_if as it
represents a common interface for RoCE and iWARP.

this commit affects RDMA/qedr as well.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch places common iWARP / RoCE code in qed_rdma
and roce specific code in qed_roce

There is one new function ( qed_roce_setup ) added, the rest
of the patch removes content from the files and removes some
static definitions.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds files that will contain common code for RoCE/iWARP.
The files are currently identical to qed_roce.c / qed_roce.h and
intentionally not added to the makefile. The next patch in the series
will modify the files so that roce specific code is left in qed_roce
and common roce/iwarp code will be placed in qed_rdma

This patch is the result of a simple
cp qed_rdma.c qed_roce.c
cp qed_rdma.h qed_roce.h
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The next patch in the series will duplicate qed_roce as part
of code preprations for iWARP support. Do some cleanup before
duplicating
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull more pin control fixes from Linus Walleij:
 "Some late arriving fixes. I should have sent earlier, just swamped
  with work as usual. Thomas patch makes AMD systems usable despite
  firmware bugs so it is fairly important.

   - Make the AMD driver use a regular interrupt rather than a chained
     one, so the system does not lock up.

   - Fix a function call error deep inside the STM32 driver"

* tag 'pinctrl-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: Fix bad function call
  pinctrl/amd: Use regular interrupt instead of chained

In order to be able to retrieve the attached programs from cls_bpf
and act_bpf, we need to expose the prog ids via netlink so that
an application can later on get an fd based on the id through the
BPF_PROG_GET_FD_BY_ID command, and dump related prog info via
BPF_OBJ_GET_INFO_BY_FD command for bpf(2).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull HID fixes from Jiri Kosina:

 - revert of a commit to magicmouse driver that regressess certain
   devices, from Daniel Stone

 - quirk for a specific Dell mouse, from Sebastian Parschauer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse"
  HID: Add quirk for Dell PIXART OEM mouse

Pull livepatching fix from Jiri Kosina:
 "Fix the way how livepatches are being stacked with respect to RCU,
  from Petr Mladek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Fix stacking of patches with respect to RCU