- 26 May, 2015 4 commits
-
-
Fu, Zhonghui authored
ACPI will manage WiFi chip's power state during suspend/resume process on some tablet platforms(such as ASUS T100TA). This is not supported by brcmfmac driver now, and the context of WiFi chip will be damaged after resume. This patch informs ACPI not to manage WiFi chip's power state. Signed-off-by:
Zhonghui Fu <zhonghui.fu@linux.intel.com> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Taehee Yoo authored
parameter "infra_mode" of rtl92c_init_beacon_max_error() is not used. so i remove this. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
Initialization routine set REG_BCN_MAX_ERR to 0xFF. also _rtl92cu_set_media_status set REG_BCN_MAX_ERR to same value. so i remove this code. Signed-off-by:
-
Lauri Kenttä authored
Signed-off-by:
Lauri Kenttä <lauri.kentta@gmail.com> Signed-off-by:
-
- 25 May, 2015 22 commits
-
-
Kalle Valo authored
Major changes: ath10k: * qca6174 power consumption improvements, enable ASPM etc (Michal) wil6210: * support Wi-Fi Simple Configuration in STA mode
-
Hariprasad Shenai authored
Add support for flashing 10GBaseT adapter with BCM 84834 PHY and Aquantia AQ1202 PHY. Updating of the PHY firmware must happen before the INITIALIZE_CMD. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add two more eBPF test cases for JITs, i.e. the second one revealed a bug in the x86_64 JIT compiler, where only an int3 filled image from the allocator was emitted and later wrongly set by the compiler as the bpf_func program code since optimization pass boundary was surpassed w/o actually emitting opcodes. Interpreter: [ 45.782892] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:0 11 PASS [ 45.783062] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:0 14705 PASS After x86_64 JIT (fixed): [ 80.495638] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:1 6 PASS [ 80.495957] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:1 17157 PASS Reference: http://thread.gmane.org/gmane.linux.network/364729Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2015-05-22 The following patches are included in this driver update series: - Retrieve and set an additional hardware feature setting - Fix the initial mode/speed determination when auto-negotiation is disabled - Add additional netif_dbg support to the driver This patch series is based on net-next. ==================== Signed-off-by: -
Lendacky, Thomas authored
Change more netdev_dbg statements over to netif_dbg and add some new netif_dbg statements to the driver. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Lendacky, Thomas authored
When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. Signed-off-by:
-
Lendacky, Thomas authored
The device private data structure contains all the defined hardware features for the device. However one of the features is not set. Even though the feature is not currently used, set it to avoid future issues of the feature being checked thinking it has been properly set. Signed-off-by:
-
Florian Westphal authored
Send icmp pmtu error if we find that the largest fragment of df-skb exceeded the output path mtu. The ip output path will still catch this later on but we can avoid the forward/postrouting hook traversal by rejecting right away. This is what ipv6 already does. Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Hannes Frederic Sowa says: ==================== net: af_unix: zerocopy stream bits This series implements zerocopy support for AF_UNIX SOCK_STREAM sockets. Changelog in the specific patches. Thanks to all the reviewers! ==================== Signed-off-by: -
Hannes Frederic Sowa authored
unix_stream_recvmsg is refactored to unix_stream_read_generic in this patch and enhanced to deal with pipe splicing. The refactoring is inneglible, we mostly have to deal with a non-existing struct msghdr argument. Signed-off-by:
-
Hannes Frederic Sowa authored
Prepare skb_splice_bits to be able to deal with AF_UNIX sockets. AF_UNIX sockets don't use lock_sock/release_sock and thus we have to use a callback to make the locking and unlocking configureable. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Frederic Sowa authored
This patch implements sendpage support for AF_UNIX SOCK_STREAM sockets. This is also required for a complete splice implementation. The implementation is a bit tricky because we append to already existing skbs and so have to hold unix_sk->readlock to protect the reading side from either advancing UNIXCB.consumed or freeing the skb at the socket receive tail. Signed-off-by:
-
Hannes Frederic Sowa authored
Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== ath10k: * enable channel 144 on 5 GHz * enable Adaptive Noise Immunity (ANI) by default * add Wake on Wireless LAN (WOW) patterns support * add basic Tunneled Direct Link Setup (TDLS) support * add multi-channel support for QCA6174 * enable IBSS RSN support * enable Bluetooth Coexistance whenever firmware supports it * add more versatile way to set bitrates used by the firmware ath9k: * spectral scan: add support for multiple FFT frames per report iwlwifi: * major rework of the scan code (Luca) * some work on the thermal code (Chaya Rachel) * some work on the firwmare debugging infrastructure brcmfmac: * SDIO suspend and resume fixes * wiphy band info and changes in regulatory settings * add support for BCM4324 SDIO and BCM4358 PCIe * enable support of PCIe devices on router platforms (Hante) ==================== Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4: Enable single ported VFs over IB ports This series further enhances the support for mlx4 single ported VFs introduced in 3.15 to work over IB ports too. Just as quick reminder, the ConnectX3 device family exposes one PCI device which serves both ports. This can be non-optimal under virtualization schemes where the admin would like the VF to expose one interface to the VM, etc. Since all the VF interaction with the firmware passes through the PF driver, we can emulate to the VF they have one port, and further create a set of the VFs which act on port1 of the device and another set which acts on port2. ==================== Signed-off-by: -
Or Gerlitz authored
Remove the limitation that disallows configuring single ported VFs in the presence of IB ports, after addressing the issues that prevented that to work. SMI (QP0) requests/responses are still not supported for single ported IB VFs. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Or Gerlitz authored
It's legal for drivers to provide the QP port through the QPC schedule-queue field on the reset-to-init QP state change. Add adjusting of the schedule queue port in the SRIOV wrapper for that operation too. Signed-off-by:
-
Or Gerlitz authored
Some VF drivers flow set the schedule queue in the QP context but without setting none of OPTPAR_SCHED_QUEUE or OPTPAR_PRIMARY_ADDR_PATH. To allow for such non-modified drivers to function as single ported IB VFs, we must adjust the schedule queue port whenever being set, e.g as currently done for single ported Eth VFs. Signed-off-by:
-
Or Gerlitz authored
As part of enabling single ported VFs over IB ports we need to handle some of the flows for generting EQ events for VFs which don't come into play under Eth ports. This mainly includes port management events derived from changes of the phyiscal port (lid change, client re-register, down/up, etc), VF pkey table changes and VF guid changes initiated by the IB driver. (1) make sure that events are generated only for VFs sitting on the relevant physical port (under the ALL_SLAVES flow). (2) before generating the event, convert from physical (one or two) to VF port (always equals one). Signed-off-by: -
Or Gerlitz authored
When multiplexling a MAD sent from VF, we should convert the port used by the guest to send the packet to the actual physical port which will be used to transmit the packet, before building the relevant address-handle (AH). This is needed under VPI for single ported VFs, since the code that builds the AH (mlx4_ib_query_ah()) makes decisions based on the input port. If we use the port number provided by the guest, it might have different protocol vs. the one this packat has to go from, and hence the result could be wrong. So far, the conversion was done after the AH was built and it worked for single ported Eth VFs which were not enabled under VPI. When adding support for single ported IB VFs and VPI, we hit that. Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
-
Or Gerlitz authored
Single port VFs always provide port = 1 (even if the actual physical port used is port 2). As such, we need to convert the port provided by the VF to the physical port before calling into the firmware. It turns out that the Linux mlx4 VF RoCE driver maintains a copy of the GID table and hence this change became critical only for single ported IB VFs, but it could be needed for other RoCE VF drivers too. Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
- 23 May, 2015 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/cadence/macb.c drivers/net/phy/phy.c include/linux/skbuff.h net/ipv4/tcp.c net/switchdev/switchdev.c Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD} renaming overlapping with net-next changes of various sorts. phy.c was a case of two changes, one adding a local variable to a function whilst the second was removing one. tcp.c overlapped a deadlock fix with the addition of new tcp_info statistic values. macb.c involved the addition of two zyncq device entries. skbuff.h involved adding back ipv4_daddr to nf_bridge_info whilst net-next changes put two other existing members of that struct into a union. Signed-off-by: -
David S. Miller authored
Jesper Dangaard Brouer says: ==================== pktgen: cleanups and introducing new samples/pktgen scripts v3: - Aborted v2 send due it was not generating diff stat (this is a bug in stg-mail, if not in the root directory) v2: address nitpicks from Cong Wang - Remove useless cat's, but keep them for old pgset() - Comment on: Due to pgctrl, cannot use exit code $? from grep - Use arithmetic compare in pktgen_sample03_burst_single_flow.sh This patchset is focused on making pktgen easier to use and better documented. It contains a number of documentation updates and minor changes to pktgen. The major contribution is introduction of common helper function for sample scripts. Instead of the old pgset() function, three new shell functions for configuring the different components of pktgen are introduced: pg_ctrl(), pg_thread() and pg_set(). The new functions correspond to pktgens different components. * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl) * pg_thread() control the kernel threads and binding to devices * pg_set() control setup of individual devices Helpers also provide consistent parameter parsing across the sample scripts. Usage example: ./pktgen_sample01_simple.sh -i eth41 -m 00:12:C0:02:AC:5A -d 192.168.41.2 Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX -i : ($DEV) output interface/device (required) -s : ($PKT_SIZE) packet size -d : ($DEST_IP) destination IP -m : ($DST_MAC) destination MAC-addr -t : ($THREADS) threads to start -c : ($SKB_CLONE) SKB clones send before alloc new SKB -b : ($BURST) HW level bursting of SKBs -v : ($VERBOSE) verbose -x : ($DEBUG) debug These scripts are borrowed from: https://github.com/netoptimizer/network-testing/tree/master/pktgen ==================== Signed-off-by:
-
Jesper Dangaard Brouer authored
This script pktgen_bench_xmit_mode_netif_receive.sh is a benchmark script, which can be used for benchmarking part of the network stack. This can be used for performance improving or catching regression in that area. The script is developed for benchmarking ingress qdisc path, original idea by Alexei Starovoitov. This script don't really need any hardware. This is achieved via the recently introduced stack inject feature "xmit_mode netif_receive". See commit 62f64aed ("pktgen: introduce xmit_mode '<start_xmit|netif_receive>'"). Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Add the pktgen samples script pktgen_sample03_burst_single_flow.sh that demonstrates how to acheive maximum performance. If correctly tuned[1] single CPU 10Gbit/s wirespeed small pkts is possible[2] which is 14.88Mpps. The trick is to take advantage of the "burst" feature introduced in commit 38b2cf29 ("net: pktgen: packet bursting via skb->xmit_more"). [1] http://netoptimizer.blogspot.dk/2014/06/pktgen-for-network-overload-testing.html [2] http://netoptimizer.blogspot.dk/2014/10/unlocked-10gbps-tx-wirespeed-smallest.htmlSigned-off-by:
-
Jesper Dangaard Brouer authored
Add the pktgen samples script pktgen_sample02_multiqueue.sh that demonstrates generating packets on multiqueue NICs. Specifically notice the options "-t" that specifies how many kernel threads to activate. Also notice the flag QUEUE_MAP_CPU, which cause the SKB TX queue to be mapped to the CPU running the kernel thread. For best scalability people are also encourage to map NIC IRQ /proc/irq/*/smp_affinity to CPU number. Usage example with "-t" 4 threads and help: ./pktgen_sample02_multiqueue.sh -i eth4 -m 00:1B:21:3C:9D:F8 -t 4 Usage: ./pktgen_sample02_multiqueue.sh [-vx] -i ethX -i : ($DEV) output interface/device (required) -s : ($PKT_SIZE) packet size -d : ($DEST_IP) destination IP -m : ($DST_MAC) destination MAC-addr -t : ($THREADS) threads to start -c : ($SKB_CLONE) SKB clones send before alloc new SKB -b : ($BURST) HW level bursting of SKBs -v : ($VERBOSE) verbose -x : ($DEBUG) debug Removing pktgen.conf-2-1 and pktgen.conf-2-2 as these examples should be covered now. Signed-off-by:
-
Jesper Dangaard Brouer authored
Add the first basic pktgen samples script pktgen_sample01_simple.sh, which demonstrates the a simple use of the helper functions. Removing pktgen.conf-1-1 as that example should be covered now. The naming scheme pktgen_sampleNN, where NN is a number, should encourage reading the samples in a specific order. Script cause pktgen sending with a single thread and single interface, and introduce flow variation via random UDP source port. Usage example and help: ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2 Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX -i : ($DEV) output interface/device (required) -s : ($PKT_SIZE) packet size -d : ($DEST_IP) destination IP -m : ($DST_MAC) destination MAC-addr -c : ($SKB_CLONE) SKB clones send before alloc new SKB -v : ($VERBOSE) verbose -x : ($DEBUG) debug Signed-off-by:
-
Jesper Dangaard Brouer authored
Preparing for removing existing samples/pktgen/ scripts, and replacing these with easier to use samples. This commit provides two helper shell files, that can be "included" by shell source'ing. Namely "functions.sh" and "parameters.sh". The parameters.sh file support easy and consistant parameter parsing across the sample scripts. Usage example is printed on errors. The functions.sh file provides, three new shell functions for configuring the different components of pktgen: pg_ctrl(), pg_thread() and pg_set(). A slightly improved version of the old pgset() function is also provided for backwards compat. The new functions correspond to pktgens different components. * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl) * pg_thread() control the kernel threads and binding to devices * pg_set() control setup of individual devices These changes are borrowed from: https://github.com/netoptimizer/network-testing/tree/master/pktgenSigned-off-by:
-
Jesper Dangaard Brouer authored
Giving /proc/net/pktgen/pgctrl an invalid command just returns shell success and prints a warning in dmesg. This is not very useful for shell scripting, as it can only detect the error by parsing dmesg. Instead return -EINVAL when the command is unknown, as this provides userspace shell scripting a way of detecting this. Also bump version tag to 2.75, because (1) reading /proc/net/pktgen/pgctrl output this version number which would allow to detect this small semantic change, and (2) because the pktgen version tag have not been updated since 2010. Signed-off-by:
-
Jesper Dangaard Brouer authored
The pktgen.txt documentation still claimed that adding same device to multiple threads were not supported, but it have been since 2008 via commit e6fce5b9 ("pktgen: multiqueue etc."). Document this and describe the naming scheme dev@X, as the procfile name still need to be unique. Fixes: e6fce5b9 ("pktgen: multiqueue etc.") Signed-off-by:
-
Jesper Dangaard Brouer authored
The pktgen.txt documentation over available config options were not complete. Making the list complete by adding the following. Pgcontrol commands: reset Device commands: burst queue_map_min queue_map_max skb_priority tos traffic_class node spi dst6_max dst6_min vlan_cfi vlan_id vlan_p svlan_cfi svlan_id svlan_p Signed-off-by:
-
Jesper Dangaard Brouer authored
Too many spaces were introduced in commit 63adc6fb ("pktgen: cleanup checkpatch warnings"), thus misaligning "src_min:" to other columns. Fixes: 63adc6fb ("pktgen: cleanup checkpatch warnings") Signed-off-by:
-
Jesper Dangaard Brouer authored
And cleanup some whitespaces in pktgen.txt. Signed-off-by:
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Radeon has two displayport fixes, one for a regression. i915 regression flicker fix needed so 4.0 can get fixed. A bunch of msm fixes and a bunch of exynos fixes, these two are probably a bit larger than I'd like, but most of them seems pretty good" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) drm/radeon: fix error flag checking in native aux path drm/radeon: retry dcpd fetch drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova() drm/exynos: dp: Lower level of EDID read success message drm/exynos: cleanup exynos_drm_plane drm/exynos: 'win' is always unsigned drm/exynos: mixer: don't dump registers under spinlock drm/exynos: Consolidate return statements in fimd_bind() drm/exynos: Constify exynos_drm_crtc_ops drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMD drm/exynos: mixer: Constify platform_device_id drm/exynos: mixer: cleanup pixelformat handling drm/exynos: mixer: also allow NV21 for the video processor drm/exynos: mixer: remove buffer count handling in vp_video_buffer() drm/exynos: plane: honor buffer offset for dma_addr drm/exynos: fb: use drm_format_num_planes to get buffer count drm/i915: fix screen flickering drm/msm: fix locking inconsistencies in gpu->destroy() drm/msm/dsi: Simplify the code to get the number of read byte drm/msm: Attach assigned encoder to eDP and DSI connectors ...
-
- 22 May, 2015 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala. 2) Fix neighbour table entry leak in rocker driver, from Ying Xue. 3) Do not emit bonding notifications for unregistered interfaces, from Nicolas Dichtel. 4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent Fourcot. 5) Fix regression in ipv6 multicast filter test, from Henning Rogge. 6) do_replace() in various footables netfilter modules is missing a check for 0 counters in the datastructure provided by the user. Fix from Dave Jones, and found with trinity. 7) Fix RCU bug in packet scheduler classifier module unloads, from Daniel Borkmann. 8) Avoid deadlock in tcp_get_info() by using u64_sync. From Eric Dumzaet. 9) Input packet processing can race with inetdev_destroy() teardown, fix potential OOPS in ip_error() by explicitly testing whether the inetdev is still attached. From Eric W Biederman. 10) MLDv2 parser in bridge multicast code breaks too early while parsing. Fix from Thadeu Lima de Souza Cascardo. 11) Asking for settings on non-zero PHYID doesn't work because we do not import the command structure from the user and use the PHYID provided there. Fix from Arun Parameswaran. 12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich. 13) Missing NF_TABLES depends for TPROXY etc can cause build failures, fix from Florian Westphal. 14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly, from Jesper Dangaard Brouer. 15) If netlink autobind retry fails, we have to reset the sockets portid back to zero. From Herbert Xu. 16) VXLAN netns exit code unregisters using wrong device, from John W Linville. 17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from Dmitry Tunin and Wen-chien Jesse Sung. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge: fix lockdep splat net: core: 'ethtool' issue with querying phy settings bridge: fix parsing of MLDv2 reports ARM: zynq: DT: Use the zynq binding with macb net: macb: Disable half duplex gigabit on Zynq net: macb: Document zynq gem dt binding ipv4: fill in table id when replacing a route cdc_ncm: Fix tx_bytes statistics ipv4: Avoid crashing in ip_error tcp: fix a potential deadlock in tcp_get_info() net: sched: fix call_rcu() race on classifier module unloads net: phy: Make sure phy_start() always re-enables the phy interrupts ipv6: fix ECMP route replacement ipv6: do not delete previously existing ECMP routes if add fails Revert "netfilter: bridge: query conntrack about skb dnat" netfilter: ensure number of counters is >0 in do_replace() netfilter: nfnetlink_{log,queue}: Register pernet in first place tcp: don't over-send F-RTO probes tcp: only undo on partial ACKs in CA_Loss net/ipv6/udp: Fix ipv6 multicast socket filter regression ...
-
