Commit 61abdbe0 ("kvm: x86: make lapic hrtimer pinned") pins the emulated
lapic timer. This patch does the same for the emulated nested preemption
timer to avoid vmexit an unrelated vCPU and the latency of kicking IPI to
another vCPU.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The validity check for the guest line address is inefficient,
check the invalid value instead of enumerating the valid ones.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge IOMMU bits for virtualization of interrupt injection into
virtual machines.

Introduce struct iommu_dev_data.use_vapic flag, which IOMMU driver
uses to determine if it should enable vAPIC support, by setting
the ga_mode bit in the device's interrupt remapping table entry.

Currently, it is enabled for all pass-through device if vAPIC mode
is enabled.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This patch implements irq_set_vcpu_affinity() function to set up interrupt
remapping table entry with vapic mode for pass-through devices.

In case requirements for vapic mode are not met, it falls back to set up
the IRTE in legacy mode.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Introduces a new IOMMU API, amd_iommu_update_ga(), which allows
KVM (SVM) to update existing posted interrupt IOMMU IRTE when
load/unload vcpu.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This patch adds AMD IOMMU guest virtual APIC log (GALOG) handler.
When IOMMU hardware receives an interrupt targeting a blocking vcpu,
it creates an entry in the GALOG, and generates an interrupt to notify
the AMD IOMMU driver.

At this point, the driver processes the log entry, and notify the SVM
driver via the registered iommu_ga_log_notifier function.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This patch adds support to detect and initialize IOMMU Guest vAPIC log
(GALOG). By default, it also enable GALog interrupt to notify IOMMU driver
when GA Log entry is created.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This patch enables support for the new 128-bit IOMMU IRTE format,
which can be used for both legacy and vapic interrupt remapping modes.
It replaces the existing operations on IRTE, which can only support
the older 32-bit IRTE format, with calls to the new struct amd_irt_ops.

It also provides helper functions for setting up, accessing, and
updating interrupt remapping table entries in different mode.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Currently, IOMMU support two interrupt remapping table entry formats,
32-bit (legacy) and 128-bit (GA). The spec also implies that it might
support additional modes/formats in the future.

So, this patch introduces the new struct amd_irte_ops, which allows
the same code to work with different irte formats by providing hooks
for various operations on an interrupt remapping table entry.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Move existing unions and structs for accessing/managing IRTE to a proper
header file. This is mainly to simplify variable declarations in subsequent
patches.

Besides, this patch also introduces new struct irte_ga for the new
128-bit IRTE format.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

This patch introduces a new IOMMU driver parameter, amd_iommu_guest_ir,
which can be used to specify different interrupt remapping mode for
passthrough devices to VM guest:
    * legacy: Legacy interrupt remapping (w/ 32-bit IRTE)
    * vapic : Guest vAPIC interrupt remapping (w/ GA mode 128-bit IRTE)

Note that in vapic mode, it can also supports legacy interrupt remapping
for non-passthrough devices with the 128-bit IRTE.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Expose AVX512DQ, AVX512BW, AVX512VL feature to guest.
Its spec can be found at:
https://software.intel.com/sites/default/files/managed/b4/3a/319433-024.pdfSigned-off-by: Luwei Kang <luwei.kang@intel.com>
[Resolved a trivial conflict with removed F(PCOMMIT).]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

That parameter isn't used in these functions,
it's probably a historical artifact.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

APIC map table is recalculated during reset APIC ID to the initial value
when enabling LAPIC. This patch move the recalculate_apic_map() to the
next branch since we don't need to recalculate apic map twice in current
codes.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When mapping a page into the guest we error check using is_error_pfn(),
however this doesn't detect a value of KVM_PFN_NOSLOT, indicating an
error HVA for the page. This can only happen on MIPS right now due to
unusual memslot management (e.g. being moved / removed / resized), or
with an Enhanced Virtual Memory (EVA) configuration where the default
KVM_HVA_ERR_* and kvm_is_error_hva() definitions are unsuitable (fixed
in a later patch). This case will be treated as a pfn of zero, mapping
the first page of physical memory into the guest.

It would appear the MIPS KVM port wasn't updated prior to being merged
(in v3.10) to take commit 81c52c56 ("KVM: do not treat noslot pfn as
a error pfn") into account (merged v3.8), which converted a bunch of
is_error_pfn() calls to is_error_noslot_pfn(). Switch to using
is_error_noslot_pfn() instead to catch this case properly.

Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.y-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-arm-for-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/ARM Fixes for v4.8-rc3

This tag contains the following fixes on top of v4.8-rc1:
 - ITS init issues
 - ITS error handling issues
 - ITS IRQ leakage fix
 - Plug a couple of ITS race conditions
 - An erratum workaround for timers
 - Some removal of misleading use of errors and comments
 - A fix for GICv3 on 32-bit guests

When the host supported TSC scaling, L2 would use a TSC multiplier of
0, which causes a VM entry failure. Now L2's TSC uses the same
multiplier as L1.
Signed-off-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the
write with vmcs02 as the current VMCS.
This will incorrectly apply modifications intended for vmcs01 to vmcs02
and L2 can use it to gain access to L0's x2APIC registers by disabling
virtualized x2APIC while using msr bitmap that assumes enabled.

Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the
current VMCS.  An alternative solution would temporarily make vmcs01 the
current VMCS, but it requires more care.

Fixes: 8d14695f ("x86, apicv: add virtual x2apic support")
Reported-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

msr bitmap can be used to avoid a VM exit (interception) on guest MSR
accesses.  In some configurations of VMX controls, the guest can even
directly access host's x2APIC MSRs.  See SDM 29.5 VIRTUALIZING MSR-BASED
APIC ACCESSES.

L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI.
To do so, L1 would first trick KVM to disable all possible interceptions
by enabling APICv features and then would turn those features off;
nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would
not intercept previously enabled MSRs even though they were not safe
with the new configuration.

Correctly re-enabling interceptions is not enough as a second bug would
still allow L1+L2 to access host's MSRs: msr bitmap was shared for all
VMCSs, so L1 could trigger a race to get the desired combination of msr
bitmap and VMX controls.

This fix allocates a msr bitmap for every L1 VCPU, allows only safe
x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would
have to intercept everything anyway.

Fixes: 3af18d9c ("KVM: nVMX: Prepare for using hardware MSR bitmap")
Reported-by: Jim Mattson <jmattson@google.com>
Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Pull networking fixes from David Miller:

 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
    Fietkau.

 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.

 3) Fix some tg3 ethtool logic bugs, and one that would cause no
    interrupts to be generated when rx-coalescing is set to 0.  From
    Satish Baddipadige and Siva Reddy Kallam.

 4) QLCNIC mailbox corruption and napi budget handling fix from Manish
    Chopra.

 5) Fix fib_trie logic when walking the trie during /proc/net/route
    output than can access a stale node pointer.  From David Forster.

 6) Several sctp_diag fixes from Phil Sutter.

 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.

 8) Checksum fixup fixes in bpf from Daniel Borkmann.

 9) Memork leaks in nfnetlink, from Liping Zhang.

10) Use after free in rxrpc, from David Howells.

11) Use after free in new skb_array code of macvtap driver, from Jason
    Wang.

12) Calipso resource leak, from Colin Ian King.

13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.

14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.

15) Fix lockdep splats in macsec, from Sabrina Dubroca.

16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
    handling.

17) Various tc-action bug fixes, from CONG Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net_sched: allow flushing tc police actions
  net_sched: unify the init logic for act_police
  net_sched: convert tcf_exts from list to pointer array
  net_sched: move tc offload macros to pkt_cls.h
  net_sched: fix a typo in tc_for_each_action()
  net_sched: remove an unnecessary list_del()
  net_sched: remove the leftover cleanup_a()
  mlxsw: spectrum: Allow packets to be trapped from any PG
  mlxsw: spectrum: Unmap 802.1Q FID before destroying it
  mlxsw: spectrum: Add missing rollbacks in error path
  mlxsw: reg: Fix missing op field fill-up
  mlxsw: spectrum: Trap loop-backed packets
  mlxsw: spectrum: Add missing packet traps
  mlxsw: spectrum: Mark port as active before registering it
  mlxsw: spectrum: Create PVID vPort before registering netdevice
  mlxsw: spectrum: Remove redundant errors from the code
  mlxsw: spectrum: Don't return upon error in removal path
  i40e: check for and deal with non-contiguous TCs
  ixgbe: Re-enable ability to toggle VLAN filtering
  ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
  ...

Cong Wang says:

====================
net_sched: tc action fixes and updates

This patchset fixes a few regressions caused by the previous
code refactor and more. Thanks to Jamal for catching them!

Note, patch 3/7 and 4/7 are not strictly necessary for this patchset,
I just want to carry them together.

---
v4: adjust an indention for Jamal
    add two more patches

v3: avoid list for fast path, suggested by Jamal

v2: replace flex_array with regular dynamic array
    keep tcf_action_stats_update() in act_api.h
    fix macro typos found by Amir
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The act_police uses its own code to walk the
action hashtable, which leads to that we could
not flush standalone tc police actions, so just
switch to tcf_generic_walker() like other actions.

(Joint work from Roman and Cong.)
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jamal reported a crash when we create a police action
with a specific index, this is because the init logic
is not correct, we should always create one for this
case. Just unify the logic with other tc actions.

Fixes: a03e6fe5 ("act_police: fix a crash during removal")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As pointed out by Jamal, an action could be shared by
multiple filters, so we can't use list to chain them
any more after we get rid of the original tc_action.
Instead, we could just save pointers to these actions
in tcf_exts, since they are refcount'ed, so convert
the list to an array of pointers.

The "ugly" part is the action API still accepts list
as a parameter, I just introduce a helper function to
convert the array of pointers to a list, instead of
relying on the C99 feature to iterate the array.

Fixes: a85a970a ("net_sched: move tc_action into tcf_common")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct tcf_exts belongs to filters, should not be visible
to plain tc actions.

Cc: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is harmless because all users pass 'a' to this macro.

Fixes: 00175aec ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef")
Cc: Amir Vadai <amir@vadai.me>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This list_del() for tc action is not needed actually,
because we only use this list to chain bulk operations,
therefore should not be carried for latter operations.

Fixes: ec0595cc ("net_sched: get rid of struct tcf_common")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After refactoring tc_action into tcf_common, we no
longer need to cleanup temporary "actions" in list,
they are permanently stored in the hashtable.

Fixes: a85a970a ("net_sched: move tc_action into tcf_common")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2016-08-16

This series contains fixes to e1000e, igb, ixgbe and i40e.

Kshitiz Gupta provides a fix for igb to resolve the PHY delay compensation
math in several functions.

Jarod Wilson provides a fix for e1000e which had to broken up into 2
patches, first is prepares the driver for expanding the list of NICs
that have occasional ~10 hour clock jumps when being used for PTP.
Second patch actually fixes i218 silicon which has been experiencing
the clock jumps while using PTP.

Alex provides 2 patches for ixgbe now that he is back at Intel.  First
fixes setting VLNCTRL.VFE bit, which was left unchanged in earlier patches
which resulted in disabling VLAN filtering for all the VFs.  Second
corrects the support for disabling the VLAN tag filtering via the
feature bit.

Lastly, David fixes i40e which was causing a kernel panic when
non-contiguous traffic classes or traffic classes not starting with TC0,
were configured on a link partner switch.  To fix this, changed the
logic when determining the total number of TCs enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: IPv4 UC router fixes

Ido says:
Patches 1-3 fix a long standing problem in the driver's init sequence,
which manifests itself quite often when routing daemons try to configure
an IP address on registered netdevs that don't yet have an associated
vPort.

Patches 4-9 add missing packet traps for the router to work properly and
also fix ordering issue following the recent changes to the driver's init
sequence.

The last patch isn't related to the router, but fixes a general problem
in which under certain conditions packets aren't trapped to CPU.

v1->v2:
- Change order of patch 7
- Add patch 6 following Ilan's comment
- Add patchset name and cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When packets enter the device they are classified to a priority group
(PG) buffer based on their PCP value. After their egress port and
traffic class are determined they are moved to the switch's shared
buffer and await transmission, if:

(Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres &&
 Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres)
||
(Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min ||
 Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min)

Packets scheduled to transmission through CPU port (trapped to CPU) use
traffic class 7, which has a zero maximum and minimum quotas. However,
when such packets arrive from PG 0 they are admitted to the shared
buffer as PG 0 has a non-zero minimum quota.

Allow all packets to be trapped to the CPU - regardless of the PG they
were classified to - by assigning a 10KB minimum quota for CPU port and
TC7.

Fixes: 8e8dfe9f ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support")
Reported-by: Tamir Winetroub <tamirw@mellanox.com>
Tested-by: Tamir Winetroub <tamirw@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before destroying the 802.1Q FID we should first remove the VID-to-FID
mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to
mlxsw_sp_fid_create().

Fixes: 14d39461 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While going over the code I noticed we are missing two rollbacks in the
port's creation error path. Add them and adjust the place of one of them
in the port's removal sequence so that both are symmetric.

Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ralue pack function needs to set op, otherwise it is 0 for add always.

Fixes: d5a1c749 ("mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the conditions to generate an ICMP Redirect Message is that "the
packet is being forwarded out the same physical interface that it was
received from" (RFC 1812).

Therefore, we need to be able to trap such packets and let the kernel
decide what to do with them.

For each RIF, enable the loop-back filter, which will raise the LBERROR
trap whenever the ingress RIF equals the egress RIF.

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Reported-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the following traps:

1) MTU Error: Trap packets whose size is bigger than the egress RIF's
MTU. If DF bit isn't set, traffic will continue to be routed in slow
path.

2) TTL Error: Trap packets whose TTL expired. This allows traceroute to
work properly.

3) OSPF packets.

Fixes: 7b27ce7b ("mlxsw: spectrum: Add traps needed for router implementation")
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit bbf2a475 ("mlxsw: spectrum: Initialize ports at the end of
init sequence") moved ports initialization to the end of the init
sequence, which means ports are the first to be removed during fini.

Since the FDB delayed work is still active when ports are removed it's
possible for it to process FDB notifications of inactive ports,
resulting in a warning message.

Fix that by marking ports as inactive only after unregistering them. The
NETDEV_UNREGISTER event will invoke bridge's driver port removal
sequence that will cause the FDB (and FDB notifications) to be flushed.

Fixes: bbf2a475 ("mlxsw: spectrum: Initialize ports at the end of init sequence")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After registering a netdevice it's possible for user space applications
to configure an IP address on it. From the driver's perspective, this
means a router interface (RIF) should be created for the PVID vPort.

Therefore, we must create the PVID vPort before registering the
netdevice.

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, when device configuration fails we emit errors to the kernel
log despite the fact we already get these from the EMAD transaction
layer, so remove them.

In addition to being unnecessary, removing these error messages will
allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort
before registering the netdevice.

Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>