- 06 Oct, 2022 29 commits
-
-
Rodrigo Siqueira authored
Add HDMI ACP bit field definition for DCN32. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Rodrigo Siqueira authored
At some point, we decided to blank HUBP during pixel data blank, and to handle that, we added some OPTC lock checks. Later, we realized that this change caused multiple regression, and we removed it. Nevertheless, we still have some leftovers that might affect some ASIC behavior, and this commit drops those changes to keep the code consistent. Reviewed-by:
-
Rodrigo Siqueira authored
SubVP has some issues related to how we allocate and enable it. This commit fixes this behavior by adding the proper check and configuration to the SubVP code path. Reviewed-by:
-
Rodrigo Siqueira authored
DCN provides a hook to check if we can have a new pipe allocation based on some DC constraints. If the current configuration supports the new pipe request, DC updates its context; otherwise, it will keep the same configuration. This behavior is similar across multiple ASICs, and for this reason, we reused DCN20 on DCN321. However, this DCN32x has some peculiarities which require its function to avoid weird pipe split issues. This commit update this issue by using dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of dcn20_acquire_idle_pipe_for_layer. Reviewed-by:
-
Rodrigo Siqueira authored
Under DCN32/321 we identified some code paths that DC never executes. This commit removes those unused codes to avoid distractions when debugging issues. Reviewed-by:
-
Martin Leung authored
why: when dynamic odm was turned on, there is also logic to halve the pixelclk this still turned on when we avoided odm in the case of odd h_total timings how: block the pixel clk mechanism also in the case of odd h_total timings Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Martin Leung <Martin.Leung@amd.com> Signed-off-by:
-
Aric Cyr authored
[how] Large deltas for periodic interrupts could result in the interrupt not being programmed properly and thus not firing. [why] Add proper wrap-around support for calculating VUPDATE and VLINE positions. Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Wenjing Liu authored
[why] According to specs, it expects us to write all 4 bytes even if current lane count is less than 4. Reviewed-by:
George Shen <George.Shen@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
-
Dillon Varone authored
[WHY?] Clocks are updating based on the incoming context's support, however the new compbuf size is not programmed prior to udpating clocks, which can result in P-State hangs. [HOW?] Increase compbuf size prior to updating clocks. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by:
Dillon Varone <Dillon.Varone@amd.com> Signed-off-by:
-
Lewis Huang authored
[Why] Disable OTG when PSRSU with z10 even if z10 is disable [How] Reverse condition to keep OTG on when Z10 is disable Reviewed-by:
Robin Chen <po-tchen@amd.com> Acked-by:
Lewis Huang <Lewis.Huang@amd.com> Signed-off-by:
-
Dmytro Laktyushkin authored
DCN315 has to always allow pstate change or SMU will hang. This workaround achieves this by applying a low pstate change latency to be used when pstate is calculated to be unsupported. This lower latency only accounts for memory retraining; a previous change handles locking in the highest available pstate allowing us to minimize required latency hiding to only account for memory retraining. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by:
-
Zhikai Zhai authored
[WHY] Now dynamic ODM will now be disabled when MPO is required safe transitions to avoid underflow, but we are triggering the way of minimal transition too often. Commit state of dc with no check will do pipeline setup which may re-initialize the component with no need such as audio. [HOW] Just do the minimal transition when all of pipes are in use, otherwise return true to skip. Reviewed-by:
Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by:
-
Leo Chen authored
[Why & How] Adding log for LTTPR to facilitate debugging. Reviewed-by:
Leo Chen <sancchen@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] - For SubVP pipe split case we need to use a minimial transition when opening MPO video since we are transitioning from 4 pipes to 3 pipes where an OPP for a previous MPCC will change - Also save and restore mall config when doing fast_validate in case there was a shallow copy of the dc->current_state Reviewed-by:
-
Ian Chen authored
We split out ILR config from "global" to "per-panel" config settings. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Ian Chen <ian.chen@amd.com> Signed-off-by:
-
Iswara Nagulendran authored
[HOW&WHY] Fixed check to only avoid PSR entry when panel is disconnected. PSR exit can be permitted to restore the HW to it's non-PSR state. Reviewed-by:
Jayendran Ramani <Jayendran.Ramani@amd.com> Acked-by:
Iswara Nagulendran <Iswara.Nagulendran@amd.com> Signed-off-by:
-
Leo (Hanghong) Ma authored
[Why && How] Remove the unnecessary AUX trace and use one trace for AUX failure. Reviewed-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by:
-
Wenjing Liu authored
[why] Analyzer shows incorrect V freq in MSA for some large timing. [how] Cast an 32 bit integer to uint64_t before multiplication to avoid integer overflow for a very large timing. Reviewed-by:
Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by:
-
Alvin Lee authored
[Description] When enabling phantom pipe on a pipe that was previously using immediate flip, we have to disable GSL or this will prevent the update from taking place right away on the phantom pipe when we enable it in FW Reviewed-by:
-
Charlene Liu authored
[why] limit the vm prefetch check for now, until the feature is fully verified. Reviewed-by:
Hansen Dsouza <Hansen.Dsouza@amd.com> Acked-by:
-
Aric Cyr authored
This reverts commit 796d6a37. 4K144 resolution isn't available on DCN31. Reviewed-by:
Sherry Wang <Yao.Wang1@amd.com> Acked-by:
-
Alvin Lee authored
[Description] - SubVP rotation support is not explicitly implemented, so block SubVP in rotation cases to avoid unexpected behaviors Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
DML does not take the fact that dcn315 does not have enough detile buffer to max all pipes. This change adds a workaround to apply the same logic DC does when calculating detile buffer size in DML. Reviewed-by:
-
Dillon Varone authored
[WHY?] In some cases, DCFCLK hardmin requests are not acknowledged by SMU as the requested clock does not have a compatible ratio with current FCLK, and it cannot be changed as FCLK P-state is not allowed. [HOW?] Allow FCLK p-state change prior to changing DCFCLK hardmin. Reviewed-by:
-
Dillon Varone authored
[Why?] Currently SubVP programming is only done in commit_planes_for_stream, as it was expected only this call would add/remove planes from a display. [How?] Add SubVP programming to dc_commit_state_no_check. Reviewed-by:
-
Li Zhong authored
amdgpu_bo_kmap() returns error when fails to map buffer object. Add the error check and propagate the error. Signed-off-by:
Li Zhong <floridsleeves@gmail.com> Signed-off-by:
-
Yang Yingliang authored
enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now, change it to static. Fixes: c55bf690 ("drm/amd/display: Add explicit FIFO disable for DP blank") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Alvin Lee authored
[Description] We only want to commit the SubVP config to DMCUB after the main and phantom pipe programming has completed. Commiting the state early can cause issues such as P-State being allowed by the HW early which causes the SubVP state machine to go into a bad state Reviewed-by:
Brian Chang <Brian.Chang@amd.com> Signed-off-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Daniel Gomez authored
Removal of DC_FP_* wrappers from dml (9696679b) provokes a mutex lock [2] on the amdgpu driver. Re-arrange the dcn10 code to avoid locking the mutex by placing the DC_FP_* wrappers around the proper functions. This fixes the following WARN/stacktrace: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 227, name: systemd-udevd preempt_count: 1, expected: 0 CPU: 4 PID: 227 Comm: systemd-udevd Not tainted 6.0.0-rc6-qtec-standard #2 Hardware name: Qtechnology A/S QT5222/QT5221, BIOS v1.0.1 06/07/2021 Call Trace: <TASK> dump_stack_lvl+0x33/0x42 __might_resched.cold.172+0xa5/0xb3 mutex_lock+0x1a/0x40 amdgpu_dpm_get_clock_by_type_with_voltage+0x38/0x70 [amdgpu] dm_pp_get_clock_levels_by_type_with_voltage+0x64/0xa0 [amdgpu] dcn_bw_update_from_pplib+0x70/0x340 [amdgpu] dcn10_create_resource_pool+0x8c8/0xd20 [amdgpu] ? __kmalloc+0x1c7/0x4a0 dc_create_resource_pool+0xe7/0x190 [amdgpu] dc_create+0x212/0x5d0 [amdgpu] amdgpu_dm_init+0x246/0x370 [amdgpu] ? schedule_hrtimeout_range_clock+0x93/0x120 ? phm_wait_for_register_unequal.part.1+0x4a/0x80 [amdgpu] dm_hw_init+0xe/0x20 [amdgpu] amdgpu_device_init.cold.56+0x1324/0x1653 [amdgpu] ? pci_bus_read_config_word+0x43/0x80 amdgpu_driver_load_kms+0x15/0x120 [amdgpu] amdgpu_pci_probe+0x116/0x320 [amdgpu] pci_device_probe+0x97/0x110 really_probe+0xdd/0x340 __driver_probe_device+0x80/0x170 driver_probe_device+0x1f/0x90 __driver_attach+0xdc/0x180 ? __device_attach_driver+0x100/0x100 ? __device_attach_driver+0x100/0x100 bus_for_each_dev+0x74/0xc0 bus_add_driver+0x19e/0x210 ? kset_find_obj+0x30/0xa0 ? 0xffffffffa0a5b000 driver_register+0x6b/0xc0 ? 0xffffffffa0a5b000 do_one_initcall+0x4a/0x1f0 ? __vunmap+0x28e/0x2f0 ? __cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x3d/0x440 do_init_module+0x4a/0x1e0 load_module+0x1cba/0x1e10 ? __do_sys_finit_module+0xb7/0x120 __do_sys_finit_module+0xb7/0x120 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ff2b5f5422d Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 ab 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc44ab28e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000555c566a9240 RCX: 00007ff2b5f5422d RDX: 0000000000000000 RSI: 00007ff2b60bb353 RDI: 0000000000000019 RBP: 00007ff2b60bb353 R08: 0000000000000000 R09: 0000555c566a9240 R10: 0000000000000019 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000020000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Fixes: 9696679b ("drm/amd/display: remove DC_FP_* wrapper from dml folder") Reviewed-by:
Daniel Gomez <daniel@qtec.com> Signed-off-by:
-
- 03 Oct, 2022 2 commits
-
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.1-2022-09-30: amdgpu: - RLC FW code cleanup - RLC fixes for GC 11.x - SMU 13.x fixes - CP FW code cleanup - SDMA FW code cleanup - GC 11.x fixes - DCN 3.2.x fixes - DCN 3.1.4 fixes - Misc fixes - RAS fixes - SR-IOV fixes - VCN 4.x fixes amdkfd: - GC 11.x fixes - Xnack fixes - UBSAN warning fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220930162012.5823-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.1: Core Changes: - Add dma_resv_assert_held to vmap/vunmap calls. - Add kunit tests for some format conversion calls. - Don't rewrite link config when setting phy test pattern in DP link training. Driver Changes: - Assorted small fixes in bridge/lt8192b, qxl, virtio-gpu, ast. - Fix corrupted image output in lt8912b. - Fix driver unbind in meson. - Add INX, BOE, AUO, Multi-Inno Technology panels to panel-edp. - Synchronize access to GEM bo's in simpledrm, ssd130x. - Use dev_err_probe in panel-edp and panel-simple. Signed-off-by:
-
- 30 Sep, 2022 5 commits
-
-
Felix Kuehling authored
This was fixed in initialize_cpsch before, but not in initialize_nocpsch. Factor sdma bitmap initialization into a helper function to apply the correct implementation in both cases without duplicating it. v2: Added a range check Reported-by:
Ellis Michael <ellis@ellismichael.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Graham Sider <Graham.Sider@amd.com> Signed-off-by:
-
Philip Yang authored
Unified memory usage with xnack off is tracked to avoid oversubscribe system memory, with xnack on, we don't track unified memory usage to allow memory oversubscribe. When switching xnack mode from off to on, subsequent free ranges allocated with xnack off will not unreserve memory. When switching xnack mode from on to off, subsequent free ranges allocated with xnack on will unreserve memory. Both cases cause memory accounting unbalanced. When switching xnack mode from on to off, need reserve already allocated svm range memory. When switching xnack mode from off to on, need unreserve already allocated svm range memory. v6: Take prange lock to access range child list v5: Handle prange child ranges v4: Handle reservation memory failure v3: Handle switching xnack mode race with svm_range_deferred_list_work v2: Handle both switching xnack from on to off and from off to on cases Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Sonny Jiang authored
Enable sram on vcn_4_0_2 Signed-off-by:
Sonny Jiang <sonny.jiang@amd.com> Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
Sonny Jiang authored
Enable VCN DPG on GC11_0_1 Signed-off-by:
-
Rob Clark authored
9178e3dcb121 ("mm: discard __GFP_ATOMIC") removed __GFP_ATOMIC, replacing it with a check for not __GFP_DIRECT_RECLAIM. Reported-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Rob Clark <robdclark@chromium.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
-
- 29 Sep, 2022 4 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2022-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix release build bug in 'remove GuC log size module parameters' (John Harrison) - Remove ipc_enabled from struct drm_i915_private (Jani Nikula) - Do not cleanup obj with NULL bo->resource (Nirmoy Das) - Fix device info for devices without display (Jani Nikula) - Force DPLL calculation for TC ports after readout (Ville Syrjälä) - Use i915_vm_put on ppgtt_create error paths (Chris Wilson) Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
Yuan Can <yuancan@huawei.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Christoph Niedermaier authored
Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support. Signed-off-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com
-
