- 17 Aug, 2019 5 commits
-
-
Chris Wilson authored
The timestamp and the cb_list are mutually exclusive, the cb_list can only be added to prior to being signaled (and once signaled we drain), while the timestamp is only valid upon being signaled. Both the timestamp and the cb_list are only valid while the fence is alive, and as soon as no references are held can be replaced by the rcu_head. By reusing the union for the timestamp, we squeeze the base dma_fence struct to 64 bytes on x86-64. v2: Sort the union chronologically Suggested-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com>. Link: https://patchwork.freedesktop.org/patch/msgid/20190817153022.5749-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently dma_fence_signal() tries to avoid the spinlock and only takes it if absolutely required to walk the callback list. However, to allow for some users to surreptitiously insert lazy signal callbacks that do not depend on enabling the signaling mechanism around every fence, we always need to notify the callbacks on signaling. As such, we will always need to take the spinlock and dma_fence_signal() effectively becomes a clone of dma_fence_signal_locked(). v2: Update the test_and_set_bit() before entering the spinlock. v3: Drop the test_[and_set]_bit() before the spinlock, it's a caller error so expected to be very unlikely. Signed-off-by:
-
Chris Wilson authored
Before we notify the fence signal callback, we remove the cb from the list. However, since we are processing the entire list from underneath the spinlock, we do not need to individual delete each element, but can simply reset the link and the entire list. Signed-off-by:
-
Chris Wilson authored
Rearrange the couple of 32-bit atomics hidden amongst the field of pointers that unnecessarily caused the compiler to insert some padding, shrinks the size of the base struct dma_fence from 80 to 72 bytes on x86-64. Signed-off-by:
-
Colin Ian King authored
Variable val is initialized to a value in a for-loop that is never read and hence it is redundant. Remove it. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190817122124.29650-1-colin.king@canonical.com
-
- 16 Aug, 2019 3 commits
-
-
Laurent Pinchart authored
drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01, NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the omapdrm-specific drivers. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Laurent Pinchart authored
Standard DRM panel drivers for several panels used by omapfb2 are now available. Their module name clashes with the modules from drivers/video/fbdev/omap2/omapfb/displays, part of the deprecated omapfb2 fbdev driver. As omapfb2 can only be compiled when the omapdrm driver is disabled, and the DRM panel drivers are useless in that case, make the omapfb2 panels depend on the standard DRM panels being disabled to fix the name clash. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: dc2e1e5b ("drm/panel: Add driver for the Toppoly TD043MTEA1 panel") Fixes: 415b8dd0 ("drm/panel: Add driver for the Toppoly TD028TTEC1 panel") Fixes: 1c8fc3f0 ("drm/panel: Add driver for the Sony ACX565AKM panel") Fixes: c9cf4c2a ("drm/panel: Add driver for the Sharp LS037V7DW01 panel") Fixes: df439abe ("drm/panel: Add driver for the NEC NL8048HL11 panel") Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added tags] Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-2-laurent.pinchart@ideasonboard.com
-
Chris Wilson authored
This reverts 67c97fb7 ("dma-buf: add reservation_object_fences helper") dd7a7d1f ("drm/i915: use new reservation_object_fences helper") 0e1d8083 ("dma-buf: further relax reservation_object_add_shared_fence") 5d344f58 ("dma-buf: nuke reservation_object seq number") The scenario that defeats simply grabbing a set of shared/exclusive fences and using them blissfully under RCU is that any of those fences may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this scenario, while keeping the rcu_read_lock we need to establish that no fence was changed in the dma_resv after a read (or full) memory barrier. Signed-off-by:
-
- 14 Aug, 2019 26 commits
-
-
Laurent Pinchart authored
This panel is used on the OMAP3 Pandora. The code is based on the omapdrm-specific panel-tpo-td043mtea1 driver. v2: - fix checkpatch warnings o (lcd == NULL) => (!lcd) (sam) o alignment to open '(' (sam) Signed-off-by: -
Laurent Pinchart authored
This panel is used on the OpenMoko Neo FreeRunner and Neo 1973. The code is based on the omapdrm-specific panel-tpo-td028ttec1 driver. v2: - fix checkpatch warnings: o (lcd == NULL) => (!lcd) (sam) o (1 << X) => BIT(X) (sam) Signed-off-by:
-
Laurent Pinchart authored
This panel is used on the Nokia N900. The code is based on the omapdrm-specific panel-sony-acx565akm driver. The hardware-related logic has been changed as little as possible to avoid regressions as hardware availability is lacking to test the changes. Follow-up patches should address the items listed in the TODO list. v2: - fix checkpatch warning (lcd == NULL) => (!lcd) (sam) Signed-off-by:
-
Laurent Pinchart authored
This panel is used on the TI SDP3430 board. The code is based on the omapdrm-specific panel-sharp-ls037v7dw01 driver. v2: - fix checkpatch warning (lcd == NULL) => (!lcd) (sam) - drop __exit_p() from remove. It caused a build warning. And no other panel drivers needs this (sam) Signed-off-by:
-
Laurent Pinchart authored
This panel is used on the Zoom2/3/3630 SDP boards. The code is based on the omapdrm-specific panel-nec-nl8048hl11 driver v2: - fix checkpatch warning (lcd == NULL) => (!lcd) (sam) Signed-off-by:
-
Laurent Pinchart authored
This panel is used on the Gumstix Overo Palo35. The code is based on the omapdrm-specific panel-lgphilips-lb035q02 driver. Signed-off-by:
-
Laurent Pinchart authored
The NEC NL8048HL11 is a 10.4cm WVGA (800x480) panel with a 24-bit RGB parallel data interface and an SPI control interface. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
The 'toppoly' vendor prefix is in use and refers to TPO, whose DT vendor prefix is already defined as 'tpo'. Add 'toppoly' as an alternative and document it as legacy. Signed-off-by:
-
Laurent Pinchart authored
LG Display is an LCD display manufacturer. Originally formed as a joint venture by LG Electronics and Philips Electronics, it was formerly known as LG.Philips LCD, hence the DT vendor prefix lgphilips (which is already in active use in the kernel). More information is available at https://en.wikipedia.org/wiki/LG_Display. Signed-off-by:
-
Nishka Dasgupta authored
The static structure aspeed_gfx_funcs, of type drm_simple_display_pipe_funcs, is used only as an argument to drm_simple_display_pipe_init(), which does not modify it. Hence make it constant to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190813063355.25549-1-nishkadg.linux@gmail.com
-
Sam Ravnborg authored
Drop use of the deprecated drmP.h header file. While touching the list of include files divide them into blocks and sort within each block. Fix fallout. Signed-off-by:
Thierry Reding <treding@nvidia.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: malidp@foss.arm.com Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-5-sam@ravnborg.org
-
Sam Ravnborg authored
Drop use of the deprecated drmP.h header file. While touching the list of include files group them and sort them. Fix fallout from the header file removal. Signed-off-by:
-
Sam Ravnborg authored
Drop use of the deprecated drmP.h header file. For all touched files divide include files into blocks, and sort them within the blocks. Fix fallout. Signed-off-by:
-
Sam Ravnborg authored
Drop use of the deprecated drmP.h header file. Fix fallout. Signed-off-by:
-
Geert Uytterhoeven authored
If the VGA connector has no DDC channel, an error pointer will be dereferenced, e.g. on Salvator-XS: Unable to handle kernel NULL pointer dereference at virtual address 000000000000017d ... Call trace: sysfs_do_create_link_sd.isra.0+0x40/0x108 sysfs_create_link+0x20/0x40 drm_sysfs_connector_add+0xa8/0xc8 drm_connector_register.part.3+0x54/0xb0 drm_connector_register_all+0xb0/0xd0 drm_modeset_register_all+0x54/0x88 drm_dev_register+0x18c/0x1d8 rcar_du_probe+0xe4/0x150 ... This happens because vga->ddc either contains a valid DDC channel pointer, or -ENODEV, and drm_connector_init_with_ddc() expects a valid DDC channel pointer, or NULL. Fix this by resetting vga->ddc to NULL in case of -ENODEV, and replacing the existing error checks by non-NULL checks. This is similar to what the HDMI connector driver does. Fixes: a4f9087e ("drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directory") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jerome Brunet authored
Provide the eld to the generic hdmi-codec driver. This will let the driver enforce the maximum channel number and set the channel allocation depending on the hdmi sink. Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
-
Jerome Brunet authored
Enable the i2s lanes depending on the number of channel in the stream Reviewed-by:
-
Jerome Brunet authored
When changing the audio hw params, reset the audio fifo to make sure any old remaining data is flushed. The databook mentions that such reset should be followed by a reset of the i2s block to make sure the samples stay aligned Reviewed-by:
-
Jerome Brunet authored
setup the channel allocation provided by the generic hdmi-codec driver Reviewed-by:
-
Jerome Brunet authored
Properly setup the channel count and layout in dw-hdmi i2s driver so we are not limited to 2 channels. Also correct the maximum channel reported by the DAI from 6 to 8 ch Reviewed-by:
-
Jerome Brunet authored
Set the number of channel in the infoframes Reviewed-by:
-
Jerome Brunet authored
Part of the channel count setup done in dw-hdmi ahb should actually be done whatever the interface providing the data. Let's move it to dw-hdmi driver instead. Reviewed-by:
-
Jerome Brunet authored
The dw-hdmi-i2s supports more formats than just regular i2s. Add support for left justified, right justified and dsp modes A and B. Reviewed-by:
-
Neil Armstrong authored
The amlogic,meson-dw-hdmi.txt and amlogic,meson-vpu.txt has been converted to YAML schemas, update MAINTAINERS to match them again. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808085522.21950-4-narmstrong@baylibre.com
-
Neil Armstrong authored
Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Display Controller over to YAML schemas. The original example has a leftover "dmc" memory cell, that has been removed in the yaml rewrite. The port connection table has been dropped in favor of a description of each port. Signed-off-by:
-
Neil Armstrong authored
Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas. The original example and usage of clock-names uses a reversed "isfr" and "iahb" clock-names, the rewritten YAML bindings uses the reversed instead of fixing the device trees order. The #sound-dai-cells optional property has been added to match this node as a sound dai. The port connection table has been dropped in favor of a description of each port. Reviewed-by:
-
- 13 Aug, 2019 3 commits
-
-
Christian König authored
Be more consistent with the naming of the other DMA-buf objects. Signed-off-by:
-
Christian König authored
The only remaining use for this is to protect against setting a new exclusive fence while we grab both exclusive and shared. That can also be archived by looking if the exclusive fence has changed or not after completing the operation. v2: switch setting excl fence to rcu_assign_pointer Signed-off-by:
-
Chris Wilson authored
During release of the syncpt, we remove it from the list of syncpt and the tree, but only if it is not already been removed. However, during signaling, we first remove the syncpt from the list. So, if we concurrently free and signal the syncpt, the free may decide that it is not part of the tree and immediately free itself -- meanwhile the signaler goes on to use the now freed datastructure. In particular, we get struck by commit 0e2f733a ("dma-buf: make dma_fence structure a bit smaller v2") as the cb_list is immediately clobbered by the kfree_rcu. v2: Avoid calling into timeline_fence_release() from under the spinlock Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381 Fixes: d3862e44 ("dma-buf/sw-sync: Fix locking around sync_timeline lists") References: 0e2f733a ("dma-buf: make dma_fence structure a bit smaller v2") Signed-off-by:
-
- 12 Aug, 2019 3 commits
-
-
Rob Herring authored
Increment the driver version to expose the new BO allocation flags. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steven Price <steven.price@arm.com> Acked-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
-
Rob Herring authored
The midgard/bifrost GPUs need to allocate GPU heap memory which is allocated on GPU page faults and not pinned in memory. The vendor driver calls this functionality GROW_ON_GPF. This implementation assumes that BOs allocated with the PANFROST_BO_NOEXEC flag are never mmapped or exported. Both of those may actually work, but I'm unsure if there's some interaction there. It would cause the whole object to be pinned in memory which would defeat the point of this. On faults, we map in 2MB at a time in order to utilize huge pages (if enabled). Currently, once we've mapped pages in, they are only unmapped if the BO is freed. Once we add shrinker support, we can unmap pages with the shrinker. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Acked-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Rob Herring authored
In preparation to handle mapping of page faults, we need the MMU handler to be threaded as code paths take a mutex. As the IRQ may be shared, we can't use the default handler and must disable the MMU interrupts locally. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by:
-
