- 02 Feb, 2017 33 commits
-
-
Chris Wilson authored
Some state is coupled into the device lifetime outside of the load/unload timeframe and requires teardown during final unreference from drm_dev_release(). For example, dmabufs hold both a device and module reference and may live longer than expected (i.e. the current pattern of the driver tearing down its state and then releasing a reference to the drm device) and yet touch driver private state when destroyed. v2: Export drm_dev_fini() and move the responsibility for finalizing the drm_device and freeing it to the release callback. (If no callback is provided, the core will call drm_dev_fini() and kfree(dev) as before.) v3: Remember to add drm_dev_fini() to drm_drv.h v4: Tidy language for kerneldoc v5: Cross reference from drm_dev_init() to note that driver->release() allows for arbitrary embedding. v6: Refer to driver data rather than driver state, as state is now becoming associated with the struct drm_atomic_state and friends. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> [danvet: Use the proper reference for struct members, which is &drm_driver.release.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202093632.31017-1-chris@chris-wilson.co.uk
-
Neil Armstrong authored
The platform driver name is currently "meson" which can lead to some confusion, this patch renames it to "meson-drm" and removes the owner attribute since is always added by __platform_driver_register called by the module_platform_driver() macro. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-3-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
The module is currently named "meson.ko" which can lead to some confusion, this patches renames it "meson-drm.ko" Signed-off-by:
-
Andrzej Hajda authored
Bug in DECON(CRTC) driver prevented interlace modes from proper work. Since DECON is fixed interlace modes can be enabled in MHL. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-26-git-send-email-a.hajda@samsung.com
-
Andrzej Hajda authored
Since all sub-protocols of MHL3 are already supported MHL3 mode can be enabled. With this patch it is possible to use packed pixel modes and clocks up to 300MHz - 1920x1080@60Hz and 4K modes. Signed-off-by:
-
Andrzej Hajda authored
In case of MHL3 HSIC should be initialized. Signed-off-by:
-
Andrzej Hajda authored
The patch adds code to report back feature complete IRQ, and code to read and drop burst writes from peer. Signed-off-by:
-
Andrzej Hajda authored
Device should report to the peer which features are really supported. Signed-off-by:
-
Andrzej Hajda authored
MHL3 protocol requires registry adjustments depending on chosen video mode. Necessary information is gathered in mode_fixup callback. In case of HDMI video modes driver should also send special AVI and MHL3 infoframes. The patch introduces generic helpers for handling MHL3 infoframes, in case of appearance of other users of MHL3 infoframes these function can be moved to common library. Signed-off-by:
-
Andrzej Hajda authored
MHL3 protocol uses vendor specific infoframes to transmit additional information to the sink. This patch adds definitions of structures and constants used to create such frames. Signed-off-by:
-
Andrzej Hajda authored
The patch allows to avoid rare cases when discovery fails. Signed-off-by:
-
Andrzej Hajda authored
MHL3 requires that after reading EDID from the sink source should ask peer for features. To make both protocols happy the patch splits the code accordingly. Signed-off-by:
-
Andrzej Hajda authored
Without delay CBUS sometimes was not reset properly. Signed-off-by:
-
Andrzej Hajda authored
Stopping output causes full re-detection of the sink and slows down the process. Signed-off-by:
-
Andrzej Hajda authored
Write burst should be enabled for MHL_INT_RC_FEAT_REQ and disabled for other commands. The patch moves functions up and adds delay setting for MHL3 burst mode. Signed-off-by:
-
Andrzej Hajda authored
MHL1 and MHL3 have different initialization paths. To make both protocols happy sink detection is put into continuation after link mode enablement. Signed-off-by:
-
Andrzej Hajda authored
MHL2 receiver require disabling transmitter on initialization. Signed-off-by:
-
Andrzej Hajda authored
Messages queue can be cleaned up by message callbacks, to avoid repeated removal of current message it should be removed from the queue before calling these callbacks. Signed-off-by:
-
Andrzej Hajda authored
In case of MHL3 CBUS is bring-up already in sii8620_got_ecbus_speed. Signed-off-by:
-
Andrzej Hajda authored
Peer capabilities should be read differently depending on protocol version. Signed-off-by:
-
Andrzej Hajda authored
MHL3 protocol requires device to respond to feature request from peer. This minimal answer fulfills the requirement and allows to continue negotiation. Signed-off-by:
-
Andrzej Hajda authored
Burst transmissions are used in MHL3 mode negotiation. Signed-off-by:
-
Andrzej Hajda authored
Burst transmissions are required in MHL3 modes. Signed-off-by:
-
Andrzej Hajda authored
The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex bidirectional traffic for three channels: - CBUS data (CBUS1 channel), - High-bandwidth MHL data (eMSC channel), - tunneling data (T-CBUS channel). It is required to fully support MHL3 dongles. Signed-off-by:
-
Andrzej Hajda authored
Due to asynchronous nature of MHL flow of execution is dispersed. Logical continuation of some actions happens after response of peer, i.e in interrupt handler. To simplify coding continuation mechanism has been added - it is now possible to provide continuation callback, which will be called after peer responds to given action. Signed-off-by:
-
Andrzej Hajda authored
This functionality is necessary to implement MHL3 modes. Signed-off-by:
-
Andrzej Hajda authored
MHL3 modes differs significantly from MHL1 mode, this helper will be used frequently to clearly distinguish them. Signed-off-by:
-
Andrzej Hajda authored
It is not necessary to set REG_COC_CTL0, REG_MHL_COC_CTL1 registers. Signed-off-by:
-
Gabriel Krisman Bertazi authored
This is the recommended way to create the drm_device structure, according to DRM documentation. Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-4-krisman@collabora.co.ukSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Gabriel Krisman Bertazi authored
qxl_device duplicates the pointer to struct pci_dev, which is not needed since we already have it in the drm_device structure. Clean it up. Signed-off-by:
-
Gabriel Krisman Bertazi authored
qxl_device duplicates a pointer to struct device, which is not needed since we already have it in the drm_device structure. Clean it up. Signed-off-by:
-
Gabriel Krisman Bertazi authored
No longer true since commit 07f8d9bd ("drm/qxl: add support for > 1 output"). qxl_num_crtc defaults to 4 and is configurable as a module parameter. Signed-off-by:
-
Max Staudt authored
Up until now, the bochsdrm driver didn't handle the nomodeset option at boot, and didn't provide a "modeset" module option either. This patch implements both. The new parameter can be used by specifying bochs-drm.modeset=0 at boot time. Signed-off-by:
Max Staudt <mstaudt@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/1484763012-17783-1-git-send-email-mstaudt@suse.de Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 01 Feb, 2017 6 commits
-
-
Eric Anholt authored
The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. Some registers move around, and the featureset is slightly different, as DSI1 (the 4-lane DSI) is a later version of the hardware block. This driver doesn't yet enable DSI0, since we don't have any hardware to test against, but it does put a lot of the register definitions and code in place. v2: Use the clk_hw interfaces, don't set CLK_IS_BASIC (from review by Stephen Boyd) Signed-off-by:Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/20170131192912.11316-1-eric@anholt.net
-
Eric Anholt authored
These are part of the vc4 display pipeline. Signed-off-by:
Rob Herring <robh@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161214194621.16499-7-eric@anholt.net
-
Eric Anholt authored
We have to set a different pixel format, which tells the hardware to use the pix_width field that's fed in sideband from the DSI encoder to divide the "pixel" clock. Signed-off-by:
-
Eric Anholt authored
We want the HVS on, obviously, and we also want DSP3 (PV1's source) to be muxed from HVS channel 2 like we expect in vc4_crtc.c. The firmware wasn't setting the DSP3 mux up when both the LCD and HDMI were disabled. Signed-off-by:
-
Takashi Iwai authored
This is just a cleanup, no functional change. The fixup code for 1366x768 in drm_mode_create_from_cmdline_mode() is basically a copy of the existing code in drm_edid.c. Make the latter code public so that it can be called from the former function. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170117164329.10551-1-tiwai@suse.deReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: include drm_crtc_internal.h to make sparse happy] Signed-off-by:
-
Daniel Vetter authored
Backmerge to resync and also so that Ville can apply a cleanup patch from Takashi. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
- 31 Jan, 2017 1 commit
-
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next adding runtime PM support to MIC driver, and including some cleanups - especially using atomic helper functions instead of specific ones - and fixups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: g2d: prevent integer overflow in drm/exynos: fix a timeout loop drm/exynos: use atomic helper commit drm/exynos: remove unnecessary codes drm/exynos: mic: Add runtime PM support drm/exynos: Stop using drm_framebuffer_unregister_private drm/exynos: mic: Fix parse_dt function drm/exynos: mic: Add mode_set callback function
-
