- 13 Feb, 2014 24 commits
-
-
Li Zefan authored
commit 8afb1474 upstream. /sys/kernel/slab/:t-0000048 # cat cpu_slabs 231 N0=16 N1=215 /sys/kernel/slab/:t-0000048 # cat slabs 145 N0=36 N1=109 See, the number of slabs is smaller than that of cpu slabs. The bug was introduced by commit 49e22585 ("slub: per cpu cache for partial pages"). We should use page->pages instead of page->pobjects when calculating the number of cpu partial slabs. This also fixes the mapping of slabs and nodes. As there's no variable storing the number of total/active objects in cpu partial slabs, and we don't have user interfaces requiring those statistics, I just add WARN_ON for those cases. Acked-by:
Christoph Lameter <cl@linux.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gregory CLEMENT authored
commit dc4910d9 upstream. When pci_base is accessed whereas it has not been properly mapped by of_iomap() the kernel hang. The check of this pointer made an improper use of IS_ERR() instead of comparing to NULL. This patch fix this issue. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Reported-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Fixes: 930ab3d4 (i2c: mv64xxx: Add I2C Transaction Generator support) Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Sebastian Hesselbarth authored
commit f28d7de6 upstream. DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip driver. As expected for irqchip drivers, it uses a C-style interrupt handler and therefore selects MULTI_IRQ_HANDLER. Now, compiling a kernel with both non-DT and DT support enabled, selecting MULTI_IRQ_HANDLER will break ASM irq handler used by non-DT boards. Therefore, we provide a C-style irq handler even for non-DT boards, if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler in orion_irq_init this is transparent to all non-DT board files. While the regression report was filed on Marvell Kirkwood, also Marvell Dove non-DT boards are affected and fixed by this patch. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by:
Ian Campbell <ijc@hellion.org.uk> Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Wolfram Sang authored
commit 9288cac0 upstream. This reverts and updates commit 77776fd0 ("mmc: sd: fix the maximum au_size for SD3.0"). The au_size for SD3.0 cannot be achieved by a simple bit shift, so this needs to be implemented differently. Also, don't print the warning in case of 0 since 'not defined' is different from 'invalid'. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
Chris Ball <chris@printf.net> Signed-off-by:
-
Ludovic Desroches authored
commit 66b512ed upstream. With some SDIO devices, timeout errors can happen when reading data. To solve this issue, the DMA transfer has to be activated before sending the command to the device. This order is incorrect in PDC mode. So we have to take care if we are using DMA or PDC to know when to send the MMC command. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Ray Jui authored
commit f662ae48 upstream. Under function mmc_blk_issue_rq, after an MMC discard operation, the MMC request data structure may be freed in memory. Later in the same function, the check of req->cmd_flags & MMC_REQ_SPECIAL_MASK is dangerous and invalid. It causes the MMC host not to be released when it should. This patch fixes the issue by marking the special request down before the discard/flush operation. Reported by: Harold (SoonYeal) Yang <haroldsy@broadcom.com> Signed-off-by:
Ray Jui <rjui@broadcom.com> Reviewed-by:
Seungwon Jeon <tgih.jun@samsung.com> Acked-by:
-
Andrey Vagin authored
commit 24f91eba upstream. The SOFT_DIRTY bit shows that the content of memory was changed after a defined point in the past. mprotect() doesn't change the content of memory, so it must not change the SOFT_DIRTY bit. This bug causes a malfunction: on the first iteration all pages are dumped. On other iterations only pages with the SOFT_DIRTY bit are dumped. So if the SOFT_DIRTY bit is cleared from a page by mistake, the page is not dumped and its content will be restored incorrectly. This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify() is called only for present pages. Fixes commit 0f8975ec ("mm: soft-dirty bits for user memory changes tracking"). Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Borislav Petkov <bp@suse.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Cyrill Gorcunov authored
commit 34228d47 upstream. The VM_SOFTDIRTY bit affects vma merge routine: if two VMAs has all bits in vm_flags matched except dirty bit the kernel can't longer merge them and this forces the kernel to generate new VMAs instead. It finally may lead to the situation when userspace application reaches vm.max_map_count limit and get crashed in worse case | (gimp:11768): GLib-ERROR **: gmem.c:110: failed to allocate 4096 bytes | | (file-tiff-load:12038): LibGimpBase-WARNING **: file-tiff-load: gimp_wire_read(): error | xinit: connection to X server lost | | waiting for X server to shut down | /usr/lib64/gimp/2.0/plug-ins/file-tiff-load terminated: Hangup | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup https://bugzilla.kernel.org/show_bug.cgi?id=67651 https://bugzilla.gnome.org/show_bug.cgi?id=719619#c0 Initial problem came from missed VM_SOFTDIRTY in do_brk() routine but even if we would set up VM_SOFTDIRTY here, there is still a way to prevent VMAs from merging: one can call | echo 4 > /proc/$PID/clear_refs and clear all VM_SOFTDIRTY over all VMAs presented in memory map, then new do_brk() will try to extend old VMA and finds that dirty bit doesn't match thus new VMA will be generated. As discussed with Pavel, the right approach should be to ignore VM_SOFTDIRTY bit when we're trying to merge VMAs and if merge successed we mark extended VMA with dirty bit where needed. Signed-off-by:
Bastian Hougaard <gnome@rvzt.net> Reported-by:
Mel Gorman <mgorman@suse.de> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Michal Hocko authored
commit 0eef6156 upstream. Commit 19f39402 ("memcg: simplify mem_cgroup_iter") has reorganized mem_cgroup_iter code in order to simplify it. A part of that change was dropping an optimization which didn't call css_tryget on the root of the walked tree. The patch however didn't change the css_put part in mem_cgroup_iter which excludes root. This wasn't an issue at the time because __mem_cgroup_iter_next bailed out for root early without taking a reference as cgroup iterators (css_next_descendant_pre) didn't visit root themselves. Nevertheless cgroup iterators have been reworked to visit root by commit bd8815a6 ("cgroup: make css_for_each_descendant() and friends include the origin css in the iteration") when the root bypass have been dropped in __mem_cgroup_iter_next. This means that css_put is not called for root and so css along with mem_cgroup and other cgroup internal object tied by css lifetime are never freed. Fix the issue by reintroducing root check in __mem_cgroup_iter_next and do not take css reference for it. This reference counting magic protects us also from another issue, an endless loop reported by Hugh Dickins when reclaim races with root removal and css_tryget called by iterator internally would fail. There would be no other nodes to visit so __mem_cgroup_iter_next would return NULL and mem_cgroup_iter would interpret it as "start looping from root again" and so mem_cgroup_iter would loop forever internally. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Hugh Dickins <hughd@google.com> Tested-by:
-
Michal Hocko authored
commit ecc736fc upstream. Hugh has reported an endless loop when the hardlimit reclaim sees the same group all the time. This might happen when the reclaim races with the memcg removal. shrink_zone [rmdir root] mem_cgroup_iter(root, NULL, reclaim) // prev = NULL rcu_read_lock() mem_cgroup_iter_load last_visited = iter->last_visited // gets root || NULL css_tryget(last_visited) // failed last_visited = NULL [1] memcg = root = __mem_cgroup_iter_next(root, NULL) mem_cgroup_iter_update iter->last_visited = root; reclaim->generation = iter->generation mem_cgroup_iter(root, root, reclaim) // prev = root rcu_read_lock mem_cgroup_iter_load last_visited = iter->last_visited // gets root css_tryget(last_visited) // failed [1] The issue seemed to be introduced by commit 5f578161 ("memcg: relax memcg iter caching") which has replaced unconditional css_get/css_put by css_tryget/css_put for the cached iterator. This patch fixes the issue by skipping css_tryget on the root of the tree walk in mem_cgroup_iter_load and symmetrically doesn't release it in mem_cgroup_iter_update. Signed-off-by:
-
Johannes Weiner authored
commit a1c3bfb2 upstream. The VM is currently heavily tuned to avoid swapping. Whether that is good or bad is a separate discussion, but as long as the VM won't swap to make room for dirty cache, we can not consider anonymous pages when calculating the amount of dirtyable memory, the baseline to which dirty_background_ratio and dirty_ratio are applied. A simple workload that occupies a significant size (40+%, depending on memory layout, storage speeds etc.) of memory with anon/tmpfs pages and uses the remainder for a streaming writer demonstrates this problem. In that case, the actual cache pages are a small fraction of what is considered dirtyable overall, which results in an relatively large portion of the cache pages to be dirtied. As kswapd starts rotating these, random tasks enter direct reclaim and stall on IO. Only consider free pages and file pages dirtyable. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Tejun Heo <tj@kernel.org> Tested-by:
Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by:
-
Johannes Weiner authored
commit a804552b upstream. Tejun reported stuttering and latency spikes on a system where random tasks would enter direct reclaim and get stuck on dirty pages. Around 50% of memory was occupied by tmpfs backed by an SSD, and another disk (rotating) was reading and writing at max speed to shrink a partition. : The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k : rpm harddrive and I could reliably reproduce constant stuttering every : several seconds for as long as buffered IO was going on on the hard drive : either with tmpfs occupying somewhere above 4gig or a test program which : allocates about the same amount of anon memory. Although swap usage was : zero, turning off swap also made the problem go away too. : : The trigger conditions seem quite plausible - high anon memory usage w/ : heavy buffered IO and swap configured - and it's highly likely that this : is happening in the wild too. (this can happen with copying large files : to usb sticks too, right?) This patch (of 2): The dirty_balance_reserve is an approximation of the fraction of free pages that the page allocator does not make available for page cache allocations. As a result, it has to be taken into account when calculating the amount of "dirtyable memory", the baseline to which dirty_background_ratio and dirty_ratio are applied. However, currently the reserve is subtracted from the sum of free and reclaimable pages, which is non-sensical and leads to erroneous results when the system is dominated by unreclaimable pages and the dirty_balance_reserve is bigger than free+reclaimable. In that case, at least the already allocated cache should be considered dirtyable. Fix the calculation by subtracting the reserve from the amount of free pages, then adding the reclaimable pages on top. [akpm@linux-foundation.org: fix CONFIG_HIGHMEM build] Signed-off-by:
-
Hugh Dickins authored
commit d8ad3055 upstream. It is surprising that the mem_cgroup iterator can return memcgs which have not yet been fully initialized. By accident (or trial and error?) this appears not to present an actual problem; but it may be better to prevent such surprises, by skipping memcgs not yet online. Signed-off-by:
-
Naoya Horiguchi authored
commit 54b9dd14 upstream. After thp split in hwpoison_user_mappings(), we hold page lock on the raw error page only between try_to_unmap, hence we are in danger of race condition. I found in the RHEL7 MCE-relay testing that we have "bad page" error when a memory error happens on a thp tail page used by qemu-kvm: Triggering MCE exception on CPU 10 mce: [Hardware Error]: Machine check events logged MCE exception done on CPU 10 MCE 0x38c535: Killing qemu-kvm:8418 due to hardware memory corruption MCE 0x38c535: dirty LRU page recovery: Recovered qemu-kvm[8418]: segfault at 20 ip 00007ffb0f0f229a sp 00007fffd6bc5240 error 4 in qemu-kvm[7ffb0ef14000+420000] BUG: Bad page state in process qemu-kvm pfn:38c400 page:ffffea000e310000 count:0 mapcount:0 mapping: (null) index:0x7ffae3c00 page flags: 0x2fffff0008001d(locked|referenced|uptodate|dirty|swapbacked) Modules linked in: hwpoison_inject mce_inject vhost_net macvtap macvlan ... CPU: 0 PID: 8418 Comm: qemu-kvm Tainted: G M -------------- 3.10.0-54.0.1.el7.mce_test_fixed.x86_64 #1 Hardware name: NEC NEC Express5800/R120b-1 [N8100-1719F]/MS-91E7-001, BIOS 4.6.3C19 02/10/2011 Call Trace: dump_stack+0x19/0x1b bad_page.part.59+0xcf/0xe8 free_pages_prepare+0x148/0x160 free_hot_cold_page+0x31/0x140 free_hot_cold_page_list+0x46/0xa0 release_pages+0x1c1/0x200 free_pages_and_swap_cache+0xad/0xd0 tlb_flush_mmu.part.46+0x4c/0x90 tlb_finish_mmu+0x55/0x60 exit_mmap+0xcb/0x170 mmput+0x67/0xf0 vhost_dev_cleanup+0x231/0x260 [vhost_net] vhost_net_release+0x3f/0x90 [vhost_net] __fput+0xe9/0x270 ____fput+0xe/0x10 task_work_run+0xc4/0xe0 do_exit+0x2bb/0xa40 do_group_exit+0x3f/0xa0 get_signal_to_deliver+0x1d0/0x6e0 do_signal+0x48/0x5e0 do_notify_resume+0x71/0xc0 retint_signal+0x48/0x8c The reason of this bug is that a page fault happens before unlocking the head page at the end of memory_failure(). This strange page fault is trying to access to address 0x20 and I'm not sure why qemu-kvm does this, but anyway as a result the SIGSEGV makes qemu-kvm exit and on the way we catch the bad page bug/warning because we try to free a locked page (which was the former head page.) To fix this, this patch suggests to shift page lock from head page to tail page just after thp split. SIGSEGV still happens, but it affects only error affected VMs, not a whole system. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 51c71a3b upstream. The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by:
Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by:
Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] Signed-off-by:
-
AKASHI Takahiro authored
commit 06bdadd7 upstream. audit_syscall_exit() saves a result of regs_return_value() in intermediate "int" variable and passes it to __audit_syscall_exit(), which expects its second argument as a "long" value. This will result in truncating the value returned by a system call and making a wrong audit record. I don't know why gcc compiler doesn't complain about this, but anyway it causes a problem at runtime on arm64 (and probably most 64-bit archs). Signed-off-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Richard Guy Briggs authored
commit e789e561 upstream. When the audit queue overflows and times out (audit_backlog_wait_time), the audit queue overflow timeout is set to zero. Once the audit queue overflow timeout condition recovers, the timeout should be reset to the original value. See also: https://lkml.org/lkml/2013/9/2/473Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
Dan Duval <dan.duval@oracle.com> Signed-off-by:
Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 28a625cb upstream. Having this struct in module memory could Oops when if the module is unloaded while the buffer still persists in a pipe. Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal merge them into nosteal_pipe_buf_ops (this is the same as default_pipe_buf_ops except stealing the page from the buffer is not allowed). Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Bjorn Helgaas authored
commit 765ee51f upstream. This reverts commit 26abfeed. In the eisa_probe() force_probe path, if we were unable to request slot resources (e.g., [io 0x800-0x8ff]), we skipped the slot with "Cannot allocate resource for EISA slot %d" before reading the EISA signature in eisa_init_device(). Commit 26abfeed moved eisa_init_device() earlier, so we tried to read the EISA signature before requesting the slot resources, and this caused hangs during boot. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1251816Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Alex Williamson authored
commit 08336fd2 upstream. dma_pte_free_level() has an off-by-one error when checking whether a pte is completely covered by a range. Take for example the case of attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first 2M superpage. The level_size() is 0x200 and we test: static void dma_pte_free_level(... ... if (!(0 > 0 || 0x1ff < 0 + 0x200)) { ... } Clearly the 2nd test is true, which means we fail to take the branch to clear and free the pagetable entry. As a result, we're leaking pagetables and failing to install new pages over the range. This was found with a PCI device assigned to a QEMU guest using vfio-pci without a VGA device present. The first 1M of guest address space is mapped with various combinations of 4K pages, but eventually the range is entirely freed and replaced with a 2M contiguous mapping. intel-iommu errors out with something like: ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083) In this case 5c2b8003 is the pointer to the previous leaf page that was neither freed nor cleared and 849c00083 is the superpage entry that we're trying to replace it with. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Wanlong Gao authored
commit 53a52f17 upstream. arch/sh/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs': arch/sh/kernel/kgdb.c:225:32: error: implicit declaration of function 'task_stack_page' [-Werror=implicit-function-declaration] arch/sh/kernel/kgdb.c:242:23: error: dereferencing pointer to incomplete type arch/sh/kernel/kgdb.c:243:22: error: dereferencing pointer to incomplete type arch/sh/kernel/kgdb.c: In function 'singlestep_trap_handler': arch/sh/kernel/kgdb.c:310:27: error: 'SIGTRAP' undeclared (first use in this function) arch/sh/kernel/kgdb.c:310:27: note: each undeclared identifier is reported only once for each function it appears in This was introduced by commit 16559ae4 ("kgdb: remove #include <linux/serial_8250.h> from kgdb.h"). [geert@linux-m68k.org: reworded and reformatted] Signed-off-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@linux-m68k.org> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
-
Steven Rostedt (Red Hat) authored
commit 3132e107 upstream. If trace_puts() is used very early in boot up, it can crash the machine if it is called before the ring buffer is allocated. If a trace_printk() is used with no arguments, then it will be converted into a trace_puts() and suffer the same fate. Fixes: 09ae7234 "tracing: Add trace_puts() for even faster trace_printk() tracing" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit dced341b upstream. The trace buffer has a descriptor pointer that goes back to the trace array. But it was never assigned. Luckily, nothing uses it (yet), but it will in the future. Although nothing currently uses this, if any of the new features get backported to older kernels, and because this is such a simple change, I'm marking it for stable too. Fixes: 12883efb "tracing: Consolidate max_tr into main trace_array structure" Signed-off-by:
-
Tetsuo Handa authored
commit 8ed81460 upstream. Hello. I got below leak with linux-3.10.0-54.0.1.el7.x86_64 . [ 681.903890] kmemleak: 5538 new suspected memory leaks (see /sys/kernel/debug/kmemleak) Below is a patch, but I don't know whether we need special handing for undoing ebitmap_set_bit() call. ---------- >>From fe97527a90fe95e2239dfbaa7558f0ed559c0992 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Date: Mon, 6 Jan 2014 16:30:21 +0900 Subject: SELinux: Fix memory leak upon loading policy Commit 2463c26d "SELinux: put name based create rules in a hashtable" did not check return value from hashtab_insert() in filename_trans_read(). It leaks memory if hashtab_insert() returns error. unreferenced object 0xffff88005c9160d0 (size 8): comm "systemd", pid 1, jiffies 4294688674 (age 235.265s) hex dump (first 8 bytes): 57 0b 00 00 6b 6b 6b a5 W...kkk. backtrace: [<ffffffff816604ae>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811cba5e>] kmem_cache_alloc_trace+0x12e/0x360 [<ffffffff812aec5d>] policydb_read+0xd1d/0xf70 [<ffffffff812b345c>] security_load_policy+0x6c/0x500 [<ffffffff812a623c>] sel_write_load+0xac/0x750 [<ffffffff811eb680>] vfs_write+0xc0/0x1f0 [<ffffffff811ec08c>] SyS_write+0x4c/0xa0 [<ffffffff81690419>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff However, we should not return EEXIST error to the caller, or the systemd will show below message and the boot sequence freezes. systemd[1]: Failed to load SELinux policy. Freezing. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
- 06 Feb, 2014 16 commits
-
-
Greg Kroah-Hartman authored
-
Borislav Petkov authored
commit 3b564968 upstream. This adds the workaround for erratum 793 as a precaution in case not every BIOS implements it. This addresses CVE-2013-6885. Erratum text: [Revision Guide for AMD Family 16h Models 00h-0Fh Processors, document 51810 Rev. 3.04 November 2013] 793 Specific Combination of Writes to Write Combined Memory Types and Locked Instructions May Cause Core Hang Description Under a highly specific and detailed set of internal timing conditions, a locked instruction may trigger a timing sequence whereby the write to a write combined memory type is not flushed, causing the locked instruction to stall indefinitely. Potential Effect on System Processor core hang. Suggested Workaround BIOS should set MSR C001_1020[15] = 1b. Fix Planned No fix planned [ hpa: updated description, fixed typo in MSR name ] Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20140114230711.GS29865@pd.tnicTested-by:
Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Paul Mackerras authored
commit 91b973f9 upstream. The code in remove_cache_dir() is supposed to remove the "cache" subdirectory from the sysfs directory for a CPU when that CPU is being offlined. It tries to do this by calling kobject_put() on the kobject for the subdirectory. However, the subdirectory only gets removed once the last reference goes away, and the reference being put here may well not be the last reference. That means that the "cache" subdirectory may still exist when the offlining operation has finished. If the same CPU subsequently gets onlined, the code tries to add a new "cache" subdirectory. If the old subdirectory has not yet been removed, we get a WARN_ON in the sysfs code, with stack trace, and an error message printed on the console. Further, we ultimately end up with an online cpu with no "cache" subdirectory. This fixes it by doing an explicit kobject_del() at the point where we want the subdirectory to go away. kobject_del() removes the sysfs directory even though the object still exists in memory. The object will get freed at some point in the future. A subsequent onlining operation can create a new sysfs directory, even if the old object still exists in memory, without causing any problems. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Srivatsa S. Bhat authored
commit d4edc5b6 upstream. On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6a (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
David Sterba authored
commit d0242061 upstream. Currently, any user can snapshot any subvolume if the path is accessible and thus indirectly create and keep files he does not own under his direcotries. This is not possible with traditional directories. In security context, a user can snapshot root filesystem and pin any potentially buggy binaries, even if the updates are applied. All the snapshots are visible to the administrator, so it's possible to verify if there are suspicious snapshots. Another more practical problem is that any user can pin the space used by eg. root and cause ENOSPC. Original report: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/484786Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Wang Shilong authored
commit 90515e7f upstream. We may return early in btrfs_drop_snapshot(), we shouldn't call btrfs_std_err() for this case, fix it. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Andy Grover authored
commit ee291e63 upstream. When creating network portals rapidly, such as when restoring a configuration, LIO's code to reuse existing portals can return a false negative if the thread hasn't run yet and set np_thread_state to ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack when attempting to bind to the same address/port. This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list, so even if the thread hasn't run yet, iscsit_get_np will return the existing np. Also, convert np_lock -> np_mutex + hold across adding new net portal to g_np_list to prevent a race where two threads may attempt to create the same network portal, resulting in one of them failing. (nab: Add missing mutex_unlocks in iscsit_add_np failure paths) (DanC: Fix incorrect spin_unlock -> spin_unlock_bh) Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 4a4caa29 upstream. This patch addresses an traditional iscsi-target fabric ack starvation issue where iscsit_allocate_cmd() -> percpu_ida_alloc_state() ends up hitting slow path percpu-ida code, because iscsit_ack_from_expstatsn() is expected to free ack'ed tags after tag allocation. This is done to take into account the tags waiting to be acknowledged and released in iscsit_ack_from_expstatsn(), but who's number are not directly limited by the CmdSN Window queue_depth being enforced by the target. So that said, this patch bumps up the pre-allocated number of per session tags to: (max(queue_depth, ISCSIT_MIN_TAGS) * 2) + ISCSIT_EXTRA_TAGS for good measure to avoid the percpu_ida_alloc_state() slow path. Signed-off-by:
-
Asias He authored
commit f466f753 upstream. vqs are freed in virtscsi_freeze but the hotcpu_notifier is not unregistered. We will have a use-after-free usage when the notifier callback is called after virtscsi_freeze. Fixes: 285e71ea ("virtio-scsi: reset virtqueue affinity when doing cpu hotplug") Signed-off-by:
Asias He <asias.hejun@gmail.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Vijaya Mohan Guvva authored
commit dcaf9aed upstream. Bfa driver crash is observed while pushing the firmware on to chinook quad port card due to uninitialized bfi_image_ct2 access which gets initialized only for CT2 ASIC based cards after request_firmware(). For quard port chinook (CT2 ASIC based), bfi_image_ct2 is not getting initialized as there is no check for chinook PCI device ID before request_firmware and instead bfi_image_cb is initialized as it is the default case for card type check. This patch includes changes to read the right firmware for quad port chinook. Signed-off-by:
Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Thomas Pugliese authored
commit 83e83ecb upstream. There is no need to skip querying the config and string descriptors for unauthorized WUSB devices when usb_new_device is called. It is allowed by WUSB spec. The only action that needs to be delayed until authorization time is the set config. This change allows user mode tools to see the config and string descriptors earlier in enumeration which is needed for some WUSB devices to function properly on Android systems. It also reduces the amount of divergent code paths needed for WUSB devices. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 2cbe5c76 upstream. Previously, hpfs scanned all bitmaps each time the user asked for free space using statfs. This patch changes it so that hpfs scans the bitmaps only once, remembes the free space and on next invocation of statfs it returns the value instantly. New versions of wine are hammering on the statfs syscall very heavily, making some games unplayable when they're stored on hpfs, with load times in minutes. This should be backported to the stable kernels because it fixes user-visible problem (excessive level load times in wine). Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by:
-
Stephen Warren authored
(This is upstream 75fae117 "ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled", backported to stable 3.10 through 3.12. 3.13 and later can take the original patch.) Commit 384a48d7 "ALSA: hda: HDMI: Support codecs with fewer cvts than pins" dynamically enabled each pin widget's PIN_OUT only when the pin was actively in use. This was required on certain NVIDIA CODECs for correct operation. Specifically, if multiple pin widgets each had their mux input select the same audio converter widget and each pin widget had PIN_OUT enabled, then only one of the pin widgets would actually receive the audio, and often not the one the user wanted! However, this apparently broke some Intel systems, and commit 6169b673 "ALSA: hda - Always turn on pins for HDMI/DP" reverted the dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA CODECs. This change supports either dynamic or static handling of PIN_OUT, selected by a flag set up during CODEC initialization. This flag is enabled for all recent NVIDIA GPUs. Reported-by:
Uosis <uosisl@gmail.com> Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Anssi Hannula authored
(This is a backport of *part* of upstream 611885bc "ALSA: hda - hdmi: Disallow unsupported 2ch remapping on NVIDIA codecs" to stable 3.10 through 3.12. Later stable already contain all of the original patch.) Mainline commit 611885bc "ALSA: hda - hdmi: Disallow unsupported 2ch remapping on NVIDIA codecs" introduces function patch_nvhdmi(). That function is edited by 75fae117 "ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled". In order to backport the PIN_OUT patch, I am first back-porting just the addition of function patch_nvhdmi(), so that the conflicts applying the PIN_OUT patch are simplified. Ideally, one might backport all of 611885bc. However, that commit doesn't apply to stable kernels, since it relies on a chain of other patches which implement new features. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [swarren, extracted just a small part of the original patch] Signed-off-by:
-
Takashi Iwai authored
commit cbd209f4 upstream. Some old AD codecs don't like the independent HP handling, either it contains a single DAC (AD1981) or it mandates the mixer routing (AD1986A). This patch removes the indep_hp flag for such codecs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68081Signed-off-by:
-
Mihai Caraman authored
commit 70713fe3 upstream. Use gva_t instead of unsigned int for eaddr in deliver_tlb_miss(). Signed-off-by:
Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
