- 16 Feb, 2018 40 commits
-
-
Eric Biggers authored
commit eff84b37 upstream. The SHA-512 multibuffer code keeps track of the number of blocks pending in each lane. The minimum of these values is used to identify the next lane that will be completed. Unused lanes are set to a large number (0xFFFFFFFF) so that they don't affect this calculation. However, it was forgotten to set the lengths to this value in the initial state, where all lanes are unused. As a result it was possible for sha512_mb_mgr_get_comp_job_avx2() to select an unused lane, causing a NULL pointer dereference. Specifically this could happen in the case where ->update() was passed fewer than SHA512_BLOCK_SIZE bytes of data, so it then called sha_complete_job() without having actually submitted any blocks to the multi-buffer code. This hit a NULL pointer dereference if another task happened to have submitted blocks concurrently to the same CPU and the flush timer had not yet expired. Fix this by initializing sha512_mb_mgr->lens correctly. As usual, this bug was found by syzkaller. Fixes: 45691e2d ("crypto: sha512-mb - submit/flush routines for AVX2") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Horia Geantă authored
commit 225ece3e upstream. In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails with -ENODEV, caam_probe() enters an endless loop: run_descriptor_deco0 ret -ENODEV -> instantiate_rng -ENODEV, overwritten by -EAGAIN ret -EAGAIN -> caam_probe -EAGAIN results in endless loop It turns out the error path in instantiate_rng() is incorrect, the checks are done in the wrong order. Fixes: 1005bccd ("crypto: caam - enable instantiation of all RNG4 state handles") Reported-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by:
Auer Lukas <lukas.auer@aisec.fraunhofer.de> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Hans Verkuil authored
commit 273caa26 upstream. If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition. All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here. Fixes: b8c601e8 ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer") Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Daniel Mentz authored
commit a1dfb4c4 upstream. The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space(). However, due to how that function is implemented, it can only be called a single time for every syscall invocation. Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space(). Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access. The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted. An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel: if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT; Notes from hans.verkuil@cisco.com: This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7 Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago. This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function. Fixes: 6b5a9492 ("v4l: introduce string control support.") Signed-off-by:
Daniel Mentz <danielmentz@google.com> Co-developed-by:
-
Hans Verkuil authored
commit d83a8243 upstream. Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases. Signed-off-by:
-
Hans Verkuil authored
commit 169f24ca upstream. There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this. Signed-off-by:
-
Hans Verkuil authored
commit a751be5b upstream. put_v4l2_window32() didn't copy back the clip list to userspace. Drivers can update the clip rectangles, so this should be done. Signed-off-by:
-
Hans Verkuil authored
commit b8c601e8 upstream. ctrl_is_pointer just hardcoded two known string controls, but that caused problems when using e.g. custom controls that use a pointer for the payload. Reimplement this function: it now finds the v4l2_ctrl (if the driver uses the control framework) or it calls vidioc_query_ext_ctrl (if the driver implements that directly). In both cases it can now check if the control is a pointer control or not. Signed-off-by:
-
Hans Verkuil authored
commit 8ed5a59d upstream. The struct v4l2_plane32 should set m.userptr as well. The same happens in v4l2_buffer32 and v4l2-compliance tests for this. Signed-off-by:
-
Hans Verkuil authored
commit 333b1e9f upstream. Instead of doing sizeof(struct foo) use sizeof(*up). There even were cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved), which is very dangerous when the size of the reserved array changes. Signed-off-by:
-
Hans Verkuil authored
commit 486c5215 upstream. These helper functions do not really help. Move the code to the __get/put_v4l2_format32 functions. Signed-off-by:
-
Hans Verkuil authored
commit b7b957d4 upstream. The indentation of this source is all over the place. Fix this. This patch only changes whitespace. Signed-off-by:
-
Hans Verkuil authored
commit 3ee6d040 upstream. The result of the VIDIOC_PREPARE_BUF ioctl was never copied back to userspace since it was missing in the switch. Signed-off-by:
-
Hans Verkuil authored
commit 181a4a2d upstream. If the ioctl returned -ENOTTY, then don't bother copying back the result as there is no point. Signed-off-by:
-
Hans Verkuil authored
commit b2469c81 upstream. Don't duplicate the buffer type checks in enum/g/s/try_fmt. The check_fmt function does that already. It is hard to keep the checks in sync for all these functions and in fact the check for VBI was wrong in the _fmt functions as it allowed SDR types as well. This caused a v4l2-compliance failure for /dev/swradio0 using vivid. This simplifies the code and keeps the check in one place and fixes the SDR/VBI bug. Signed-off-by:
-
Eric Biggers authored
commit 9fa68f62 upstream. Currently, almost none of the keyed hash algorithms check whether a key has been set before proceeding. Some algorithms are okay with this and will effectively just use a key of all 0's or some other bogus default. However, others will severely break, as demonstrated using "hmac(sha3-512-generic)", the unkeyed use of which causes a kernel crash via a (potentially exploitable) stack buffer overflow. A while ago, this problem was solved for AF_ALG by pairing each hash transform with a 'has_key' bool. However, there are still other places in the kernel where userspace can specify an arbitrary hash algorithm by name, and the kernel uses it as unkeyed hash without checking whether it is really unkeyed. Examples of this include: - KEYCTL_DH_COMPUTE, via the KDF extension - dm-verity - dm-crypt, via the ESSIV support - dm-integrity, via the "internal hash" mode with no key given - drbd (Distributed Replicated Block Device) This bug is especially bad for KEYCTL_DH_COMPUTE as that requires no privileges to call. Fix the bug for all users by adding a flag CRYPTO_TFM_NEED_KEY to the ->crt_flags of each hash transform that indicates whether the transform still needs to be keyed or not. Then, make the hash init, import, and digest functions return -ENOKEY if the key is still needed. The new flag also replaces the 'has_key' bool which algif_hash was previously using, thereby simplifying the algif_hash implementation. Reported-by:
-
Eric Biggers authored
commit a208fa8f upstream. We need to consistently enforce that keyed hashes cannot be used without setting the key. To do this we need a reliable way to determine whether a given hash algorithm is keyed or not. AF_ALG currently does this by checking for the presence of a ->setkey() method. However, this is actually slightly broken because the CRC-32 algorithms implement ->setkey() but can also be used without a key. (The CRC-32 "key" is not actually a cryptographic key but rather represents the initial state. If not overridden, then a default initial state is used.) Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which indicates that the algorithm has a ->setkey() method, but it is not required to be called. Then set it on all the CRC-32 algorithms. The same also applies to the Adler-32 implementation in Lustre. Also, the cryptd and mcryptd templates have to pass through the flag from their underlying algorithm. Signed-off-by:
-
Eric Biggers authored
commit a16e772e upstream. Since Poly1305 requires a nonce per invocation, the Linux kernel implementations of Poly1305 don't use the crypto API's keying mechanism and instead expect the key and nonce as the first 32 bytes of the data. But ->setkey() is still defined as a stub returning an error code. This prevents Poly1305 from being used through AF_ALG and will also break it completely once we start enforcing that all crypto API users (not just AF_ALG) call ->setkey() if present. Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL. Signed-off-by:
-
Eric Biggers authored
commit fa59b92d upstream. When the mcryptd template is used to wrap an unkeyed hash algorithm, don't install a ->setkey() method to the mcryptd instance. This change is necessary for mcryptd to keep working with unkeyed hash algorithms once we start enforcing that ->setkey() is called when present. Signed-off-by:
-
Eric Biggers authored
commit 841a3ff3 upstream. When the cryptd template is used to wrap an unkeyed hash algorithm, don't install a ->setkey() method to the cryptd instance. This change is necessary for cryptd to keep working with unkeyed hash algorithms once we start enforcing that ->setkey() is called when present. Signed-off-by:
-
Eric Biggers authored
commit cd6ed77a upstream. Templates that use an shash spawn can use crypto_shash_alg_has_setkey() to determine whether the underlying algorithm requires a key or not. But there was no corresponding function for ahash spawns. Add it. Note that the new function actually has to support both shash and ahash algorithms, since the ahash API can be used with either. Signed-off-by:
-
Mika Westerberg authored
commit f919dde0 upstream. Add Intel Cannon Lake PCH-H PCI ID to the list of supported controllers. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 998008b7 upstream. Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI SATA controllers. This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit ca1b4974 upstream. Intel uses different SATA PCI ids for the Desktop and Mobile SKUs of their chipsets. For older models the comment describing which chipset the PCI id is for, aksi indicates when we're dealing with a mobile SKU. Extend the comments for recent chipsets to also indicate mobile SKUs. The information this commit adds comes from Intel's chipset datasheets. This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets. Signed-off-by:
-
Ivan Vecera authored
commit ba87977a upstream. Commit b7ce40cf ("kernfs: cache atomic_write_len in kernfs_open_file") changes type of local variable 'len' from ssize_t to size_t. This change caused that the *ppos value is updated also when the previous write callback failed. Mentioned snippet: ... len = ops->write(...); <- return value can be negative ... if (len > 0) <- true here in this case *ppos += len; ... Fixes: b7ce40cf ("kernfs: cache atomic_write_len in kernfs_open_file") Acked-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Trond Myklebust authored
commit e231c687 upstream. When locking the file in order to do O_DIRECT on it, we must unmap any mmapped ranges on the pagecache so that we can flush out the dirty data. Fixes: a5864c99 ("NFS: Do not serialise O_DIRECT reads and writes") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Eric Biggers authored
commit 49686cbb upstream. nfs_idmap_legacy_upcall() is supposed to be called with 'aux' pointing to a 'struct idmap', via the call to request_key_with_auxdata() in nfs_idmap_request_key(). However it can also be reached via the request_key() system call in which case 'aux' will be NULL, causing a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall(), assuming that the key description is valid enough to get that far. Fix this by making nfs_idmap_legacy_upcall() negate the key if no auxdata is provided. As usual, this bug was found by syzkaller. A simple reproducer using the command-line keyctl program is: keyctl request2 id_legacy uid:0 '' @s Fixes: 57e62324 ("NFS: Store the legacy idmapper result in the keyring") Reported-by: syzbot+5dfdbcf7b3eb5912abbb@syzkaller.appspotmail.com Signed-off-by:
Trond Myklebust <trondmy@gmail.com> Signed-off-by:
-
J. Bruce Fields authored
commit 1b8d97b0 upstream. If some of the WRITE calls making up an O_DIRECT write syscall fail, we neglect to commit, even if some of the WRITEs succeed. We also depend on the commit code to free the reference count on the nfs_page taken in the "if (request_commit)" case at the end of nfs_direct_write_completion(). The problem was originally noticed because ENOSPC's encountered partway through a write would result in a closed file being sillyrenamed when it should have been unlinked. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 8634ef5e upstream. The LOOKUPP operation was inserted into the nfs4_procedures array rather than being appended, which put /proc/net/rpc/nfs out of whack, and broke the nfsstat utility. Fix by moving the LOOKUPP operation to the end of the array, and by ensuring that it keeps the same length whether or not NFSV4.1 and NFSv4.2 are compiled in. Fixes: 5b5faaf6 ("nfs4: add NFSv4 LOOKUPP handlers") Signed-off-by:
-
Trond Myklebust authored
commit 7f1bda44 upstream. The commit list can get very large, and so we need a cond_resched() in nfs_commit_release_pages() in order to ensure we don't hog the CPU for excessive periods of time. Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Tigran Mkrtchyan authored
commit 7ff4cff6 upstream. A pNFS server may return LAYOUTUNAVAILABLE error on LAYOUTGET for files which don't have any layout. In this situation pnfs_update_layout currently returns NULL. As this NULL is converted into ENOMEM, IO requests fails instead of falling back to MDS. Do not return ENOMEM on LAYOUTUNAVAILABLE and let client retry through MDS. Fixes 8d40b0f1. I will suggest to backport this fix to affected stable branches. Signed-off-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> [trondmy: Use IS_ERR_OR_NULL()] Fixes: 8d40b0f1 ("NFS filelayout:call GETDEVICEINFO after...") Signed-off-by:
-
Scott Mayhew authored
commit ba4a76f7 upstream. Currently when falling back to doing I/O through the MDS (via pnfs_{read|write}_through_mds), the client frees the nfs_pgio_header without releasing the reference taken on the dreq via pnfs_generic_pg_{read|write}pages -> nfs_pgheader_init -> nfs_direct_pgio_init. It then takes another reference on the dreq via nfs_generic_pg_pgios -> nfs_pgheader_init -> nfs_direct_pgio_init and as a result the requester will become stuck in inode_dio_wait. Once that happens, other processes accessing the inode will become stuck as well. Ensure that pnfs_read_through_mds() and pnfs_write_through_mds() clean up correctly by calling hdr->completion_ops->completion() instead of calling hdr->release() directly. This can be reproduced (sometimes) by performing "storage failover takeover" commands on NetApp filer while doing direct I/O from a client. This can also be reproduced using SystemTap to simulate a failure while doing direct I/O from a client (from Dave Wysochanski <dwysocha@redhat.com>): stap -v -g -e 'probe module("nfs_layout_nfsv41_files").function("nfs4_fl_prepare_ds").return { $return=NULL; exit(); }' Suggested-by:
Scott Mayhew <smayhew@redhat.com> Fixes: 1ca018d2 ("pNFS: Fix a memory leak when attempted pnfs fails") Signed-off-by:
-
Eric Biggers authored
commit 6b46d444 upstream. ubifs_symlink() forgot to free the kmalloc()'ed buffer holding the encrypted symlink target, creating a memory leak. Fix it. (UBIFS could actually encrypt directly into ui->data, removing the temporary buffer, but that is left for the patch that switches to use the symlink helper functions.) Fixes: ca7f85be ("ubifs: Add support for encrypted symlinks") Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Bradley Bolen authored
commit 7f29ae9f upstream. This fixes a race with idr_alloc where gd->first_minor can be set to the same value for two simultaneous calls to ubiblock_create. Each instance calls device_add_disk with the same first_minor. device_add_disk calls bdi_register_owner which generates several warnings. WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2' WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240 kobject_add_internal+0x1ec/0x2f8 kobject_add_internal failed for 252:2 with -EEXIST, don't try to register things with the same name in the same directory WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/dev/block/252:2' However, device_add_disk does not error out when bdi_register_owner returns an error. Control continues until reaching blk_register_queue. It then BUGs. kernel BUG at kernel-source/fs/sysfs/group.c:113! [<c01e26cc>] (internal_create_group) from [<c01e2950>] (sysfs_create_group+0x20/0x24) [<c01e2950>] (sysfs_create_group) from [<c00e3d38>] (blk_trace_init_sysfs+0x18/0x20) [<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>] (blk_register_queue+0xd8/0x154) [<c02bdfbc>] (blk_register_queue) from [<c02cec84>] (device_add_disk+0x194/0x44c) [<c02cec84>] (device_add_disk) from [<c0436ec8>] (ubiblock_create+0x284/0x2e0) [<c0436ec8>] (ubiblock_create) from [<c0427bb8>] (vol_cdev_ioctl+0x450/0x554) [<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44) [<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790) [<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68) [<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34) Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor unique. Fixes: 2bf50d42 ("UBI: block: Dynamically allocate minor numbers") Signed-off-by:
Bradley Bolen <bradleybolen@gmail.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Sascha Hauer authored
commit f78e5623 upstream. The fastmap update code might erase the current fastmap anchor PEB in case it doesn't find any new free PEB. When a power cut happens in this situation we must not have any outdated fastmap anchor PEB on the device, because that would be used to attach during next boot. The easiest way to make that sure is to erase all outdated fastmap anchor PEBs synchronously during attach. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
-
Clay McClure authored
commit a51a0c8d upstream. Similar to commit 714fb87e ("ubi: Fix race condition between ubi device creation and udev"), we should make the volume active before registering it. Signed-off-by:
Clay McClure <clay@daemons.net> Signed-off-by:
-
Miquel Raynal authored
commit f4c6cd1a upstream. When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'. For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine. Fixes: 1fef62c1 ("mtd: nand: add sunxi NAND flash controller support") Suggested-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by:
-
Miquel Raynal authored
commit 87e89ce8 upstream. Starting from commit 041e4575 ("mtd: nand: handle ECC errors in OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a negative error, and the MTD layer expected it. However, the trend for the NAND layer is now to return an error or a positive number of bitflips. Deciding which status to return to the user belongs to the MTD layer. Commit e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") brought this logic to the mtd_read_oob() function while the return value coming from nand_do_read_oob() (called by the ->_read_oob() hook) was left unchanged. Fixes: e47f6858 ("mtd: check for max_bitflips in mtd_read_oob()") Signed-off-by:
-
Kamal Dasu authored
commit f953f0f8 upstream. Brcm nand controller prefetch feature needs to be disabled by default. Enabling affects performance on random reads as well as dma reads. Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 9e343e87 upstream. The map_word_() functions, dating back to linux-2.6.8, try to perform bitwise operations on a 'map_word' structure. This may have worked with compilers that were current then (gcc-3.4 or earlier), but end up being rather inefficient on any version I could try now (gcc-4.4 or higher). Specifically we hit a problem analyzed in gcc PR81715 where we fail to reuse the stack space for local variables. This can be seen immediately in the stack consumption for cfi_staa_erase_varsize() and other functions that (with CONFIG_KASAN) can be up to 2200 bytes. Changing the inline functions into macros brings this down to 1280 bytes. Without KASAN, the same problem exists, but the stack consumption is lower to start with, my patch shrinks it from 920 to 496 bytes on with arm-linux-gnueabi-gcc-5.4, and saves around 1KB in .text size for cfi_cmdset_0020.c, as it avoids copying map_word structures for each call to one of these helpers. With the latest gcc-8 snapshot, the problem is fixed in upstream gcc, but nobody uses that yet, so we should still work around it in mainline kernels and probably backport the workaround to stable kernels as well. We had a couple of other functions that suffered from the same gcc bug, and all of those had a simpler workaround involving dummy variables in the inline function. Unfortunately that did not work here, the macro hack was the best I could come up with. It would also be helpful to have someone to a little performance testing on the patch, to see how much it helps in terms of CPU utilitzation. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
