- 17 Jan, 2012 5 commits
-
-
Eugeni Dodonov authored
Fix function name in comments, a left-over from when i965_reset was renamed to i915_reset. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
This cleans up the mode set path a little further, making it easier to extend for future platforms. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: shut up stupid gcc warning about potential use of un-initlized fp2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jesse Barnes authored
Makes the mode set routine a little cleaner and easier to extend. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
This is needed to run the simulator. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: added a comment in case people wonder what it's for.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Eugeni Dodonov authored
After checking the specs and discussing with Jesse, turns out CxSR is not available on Ironlake and gen5, and its advertisement on the device description is misleading. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 16 Jan, 2012 2 commits
-
-
Sean Paul authored
This patch enforces that the downclock clock source is the same as the preferred clock source for LVDS. This fixes a bug where the driver chooses a downclock clock source with a different P than the preferred mode clock source. This happened even if the preferred clock source implemented an acceptable rate for the downclock. The result of this bug is that downclock is disabled. Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Adam Jackson authored
<@ajax> mjg59: how concerned should i be about [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions ? <@mjg59> ajax: Entirely unconcerned Signed-off-by: Adam Jackson <ajax@redhat.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 10 Jan, 2012 3 commits
-
-
Dave Airlie authored
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
Add a cast here to silence a Gcc warning. drivers/gpu/drm/gma500/mid_bios.c:214:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
The "if (!p && !p->dev)" condition isn't right because || was intended instead of &&. But actually, "p" is the list cursor and so it's always non-NULL and we can just remove that bit. We can remove the another similar check as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 09 Jan, 2012 5 commits
-
-
Dan Carpenter authored
The second lock should be an unlock or it causes a deadlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
"bo_va" is dereferenced in the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Daniel Vetter authored
Fallout from my "kill drm_sman" refactor. Unfortunately gcc seems to have failed me and not warned about this. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> (on via) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Add a VM manager enabled field and use it to check if vm is enabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: jglisse@redhat.com Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 06 Jan, 2012 9 commits
-
-
Dave Airlie authored
So we have a few places where the drm drivers would like to sleep to be nice to the system, mainly in the modesetting paths, but we also have two cases were atomic modesetting must take place, panic writing and kernel debugger. So provide a central inline to determine if a sleep or delay should be used and use this in the intel and radeon drivers. v2: drop intel_drv.h MSLEEP macro, nobody uses it. Based on patch from Michel Dänzer <michel.daenzer@amd.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43941Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Michel Dänzer authored
It would previously write basically random bits to PCI configuration space... Not very surprising that the GPU tended to stop responding completely. The resulting MCE even froze the whole machine sometimes. Now resetting the GPU after a lockup has at least a fighting chance of succeeding. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
ttm tt rework modified the way we allocate and populate the ttm_tt structure, the AGP side was missing some bit to properly work. Fix those and fix radeon and nouveau AGP support. Tested on radeon only so far. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Tormod Volden authored
Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Reviewed-by: Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Konrad Rzeszutek Wilk authored
drm/ttm/dma: Fix accounting error when calling ttm_mem_global_free_page and don't try to free freed pages. The code to figure out how many pages to shrink the pool ends up capping the 'count' at _manager->options.max_size - which is OK. Except that the 'count' is also used when accounting for how many pages are recycled - which we end up with the invalid values. This fixes it by using a different value for the amount of pages to shrink. On top of that we would free the cached page pool - which is nonsense as they are deleted from the pool - so there are no free pages in that pool.. Also we also missed the opportunity to batch the amount of pages to free (similar to how ttm_page_alloc.c does it). This reintroduces the code that was lost during rebasing. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Konrad Rzeszutek Wilk authored
Otherwise we are doing redundant work. Especially since the 'unbind' and 'unpopulate' have been merged and nouveau driver ends up calling it quite excessivly. On a GeForce 8600 GT with Gnome Shell (GNOME 3) we end up spending about 54% CPU time in __change_page_attr_set_clr checking the page flags. The callgraph (annotated) looks as so before this patch: 53.29% gnome-shell [kernel.kallsyms] [k] static_protections | --- static_protections | |--91.80%-- __change_page_attr_set_clr | change_page_attr_set_clr | set_pages_array_wb | | | |--96.55%-- ttm_dma_unpopulate | | nouveau_ttm_tt_unpopulate | | ttm_tt_destroy | | ttm_bo_cleanup_memtype_use | | ttm_bo_release | | kref_put | | ttm_bo_unref | | nouveau_gem_object_del | | drm_gem_object_free | | kref_put | | drm_gem_object_unreference_unlocked | | drm_gem_object_handle_unreference_unlocked.part.1 | | drm_gem_handle_delete | | drm_gem_close_ioctl | | drm_ioctl | | do_vfs_ioctl | | sys_ioctl | | system_call_fastpath | | __GI___ioctl | | | --3.45%-- ttm_dma_pages_put | ttm_dma_page_pool_free | ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --8.20%-- change_page_attr_set_clr set_pages_array_wb | |--93.76%-- ttm_dma_unpopulate | nouveau_ttm_tt_unpopulate | ttm_tt_destroy | ttm_bo_cleanup_memtype_use | ttm_bo_release | kref_put | ttm_bo_unref | nouveau_gem_object_del | drm_gem_object_free | kref_put | drm_gem_object_unreference_unlocked | drm_gem_object_handle_unreference_unlocked.part.1 | drm_gem_handle_delete | drm_gem_close_ioctl | drm_ioctl | do_vfs_ioctl | sys_ioctl | system_call_fastpath | __GI___ioctl | --6.24%-- ttm_dma_pages_put ttm_dma_page_pool_free ttm_dma_unpopulate nouveau_ttm_tt_unpopulate ttm_tt_destroy ttm_bo_cleanup_memtype_use ttm_bo_release kref_put ttm_bo_unref nouveau_gem_object_del drm_gem_object_free kref_put drm_gem_object_unreference_unlocked drm_gem_object_handle_unreference_unlocked.part.1 drm_gem_handle_delete drm_gem_close_ioctl drm_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath __GI___ioctl and after this patch all of that disappears. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
We need to synchronize across rings when doing a bo move to make sure we the buffer is idle if it's in use by a different ring than the ring doing the move. v2: fix fence setup for bo moves v3: add missing ring lock/unlock Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Christian König authored
Use semaphores to sync buffers across rings in the CS ioctl. Add a reloc flag to allow userspace to skip sync for buffers. agd5f: port to latest CS ioctl changes. v2: add ring lock/unlock to make sure changes hit the ring. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
Virtual address space are per drm client (opener of /dev/drm). Client are in charge of virtual address space, they need to map bo into it by calling DRM_RADEON_GEM_VA ioctl. First 16M of virtual address space is reserved by the kernel. Once using 2 level page table we should be able to have a small vram memory footprint for each pt (there would be one pt for all gart, one for all vram and then one first level for each virtual address space). Plan include using the sub allocator for a common vm page table area and using memcpy to copy vm page table in & out. Or use a gart object and copy things in & out using dma. v2: agd5f fixes: - Add vram base offset for vram pages. The GPU physical address of a vram page is FB_OFFSET + page offset. FB_OFFSET is 0 on discrete cards and the physical bus address of the stolen memory on integrated chips. - VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR covers all vmid's >= 1 v3: agd5f: - integrate with the semaphore/multi-ring stuff v4: - rebase on top ttm dma & multi-ring stuff - userspace is now in charge of the address space - no more specific cs vm ioctl, instead cs ioctl has a new chunk v5: - properly handle mem == NULL case from move_notify callback - fix the vm cleanup path v6: - fix update of page table to only happen on valid mem placement v7: - add tlb flush for each vm context - add flags to define mapping property (readable, writeable, snooped) - make ring id implicit from ib->fence->ring, up to each asic callback to then do ring specific scheduling if vm ib scheduling function v8: - add query for ib limit and kernel reserved virtual space - rename vm->size to max_pfn (maximum number of page) - update gem_va ioctl to also allow unmap operation - bump kernel version to allow userspace to query for vm support v9: - rebuild page table only when bind and incrementaly depending on bo referenced by cs and that have been moved - allow virtual address space to grow - use sa allocator for vram page table - return invalid when querying vm limit on non cayman GPU - dump vm fault register on lockup v10: agd5f: - Move the vm schedule_ib callback to a standalone function, remove the callback and use the existing ib_execute callback for VM IBs. v11: - rebase on top of lastest Linus v12: agd5f: - remove spurious backslash - set IB vm_id to 0 in radeon_ib_get() v13: agd5f: - fix handling of RADEON_CHUNK_ID_FLAGS v14: - fix va destruction - fix suspend resume - forbid bo to have several different va in same vm v15: - rebase v16: - cleanup left over of vm init/fini v17: agd5f: - cs checker v18: agd5f: - reworks the CS ioctl to better support multiple rings and VM. Rather than adding a new chunk id for VM, just re-use the IB chunk id and add a new flags for VM mode. Also define additional dwords for the flags chunk id to define the what ring we want to use (gfx, compute, uvd, etc.) and the priority. v19: - fix cs fini in weird case of no ib - semi working flush fix for ni - rebase on top of sa allocator changes v20: agd5f: - further CS ioctl cleanups from Christian's comments v21: agd5f: - integrate CS checker improvements v22: agd5f: - final cleanups for release, only allow VM CS on cayman Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 05 Jan, 2012 9 commits
-
-
Ilija Hadzic authored
drm_getclient, drm_getstats and drm_getmap (with a few minor adjustments) do not need global mutex, so fix that and make the said ioctls DRM_UNLOCKED. Details: drm_getclient: the only thing that should be protected here is dev->filelist and that is already protected everywhere with dev->struct_mutex. drm_getstats: there is no need for any mutex here because the loop runs through quasi-static (set at load time only) data, and the actual count access is done with atomic_read() drm_getmap already uses dev->struct_mutex to protect dev->maplist, which also used to protect the same structure everywhere else except at three places: * drm_getsarea, which doesn't grab *any* mutex before touching dev->maplist (so no drm_global_mutex doesn't help here either; different issue for a different patch). However, drivers seem to call it only at initialization time so it probably doesn't matter * drm_master_destroy, which is called from drm_master_put, which in turn is protected with dev->struct_mutex everywhere else in drm module, so we are good here too. * drm_getsareactx, which releases the dev->struct_mutex too early, but this patch includes the fix for that. v2: * incorporate comments received from Daniel Vetter * include the (long) explanation above to make it clear what we are doing (and why), also at Daniel Vetter's request * tighten up mutex grab/release locations to only encompass real critical sections, rather than some random code around them Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Ilija Hadzic authored
drm_getcap and drm_version ioctls only reads static data, there is no need to protect them with drm_global_mutex, so make them DRM_UNLOCKED Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chen Jie authored
Sweep common_modes array should start with index 0. Signed-off-by: Chen Jie <chenj@lemote.com> Reviewed-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
We often end up missing fences on older asics with writeback enabled which leads to delays in the userspace accel code, so just disable it by default on those asics. Reported-by: Helge Deller <deller@gmx.de> Reported-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
This allow to share the ib pool with semaphore and avoid having more bo around. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
This avoid to waste ib pool size and avoid a bunch of wait for previous ib to finish. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Rob Clark authored
In cases where the scanout hw is sufficiently similar between "overlay" and traditional crtc layers, it might be convenient to allow the driver to create internal drm_plane helper objects used by the drm_crtc implementation, rather than duplicate code between the plane and crtc. A private plane is not exposed to userspace. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Rob Clark authored
Since plane->fb and plane->crtc are set in drm_mode_setplane() after update_plane(), They should be cleared after disable(). Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 03 Jan, 2012 7 commits
-
-
Jesse Barnes authored
If it failed, leave it in the "off" state. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
-
Jesse Barnes authored
If a PCH pipe PLL is being used by transcoder C, don't disable it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
-
Daniel Vetter authored
In the pre-gem days with non-existing hangcheck and gpu reset code, this timeout of 3 seconds was pretty important to avoid stuck processes. But now we have the hangcheck code in gem that goes to great length to ensure that the gpu is really dead before declaring it wedged. So there's no need for this timeout anymore. Actually it's even harmful because we can bail out too early (e.g. with xscreensaver slip) when running giant batchbuffers. And our code isn't robust enough to properly unroll any state-changes, we pretty much rely on the gpu reset code cleaning up the mess (like cache tracking, fencing state, active list/request tracking, ...). With this change intel_begin_ring can only fail when the gpu is wedged, and it will return -EAGAIN (like wait_request in case the gpu reset is still outstanding). v2: Chris Wilson noted that on resume timers aren't running and hence we won't ever get kicked out of this loop by the hangcheck code. Use an insanely large timeout instead for the HAS_GEM case to prevent resume bugs from totally hanging the machine. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
-
Daniel Vetter authored
If our semaphore logic gets confused and we have a ring stuck waiting for one, there's a decent chance it'll just execute garbage when being kicked. Also, kicking the ring obscures the place where the error first occured, making error_state decoding much harder. So drop this an let gpu reset handle this mess in a clean fashion. In contrast, kicking rings stuck on MI_WAIT is rather harmless, at worst there'll be a bit of screen-flickering. There's also old broken userspace out there which needs this as a work-around. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@hchris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
-
Eric Anholt authored
These registers are automatically incremented by the hardware during transform feedback to track where the next streamed vertex output should go. Unlike the previous generation, which had a packet for setting the corresponding registers to a defined value, gen7 only has MI_LOAD_REGISTER_IMM to do so. That's a secure packet (since it loads an arbitrary register), so we need to do it from the kernel, and it needs to be settable atomically with the batchbuffer execution so that two clients doing transform feedback don't stomp on each others' state. Instead of building a more complicated interface involcing setting the registers to a specific value, just set them to 0 when asked and userland can tweak its pointers accordingly. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
-
Eric Anholt authored
The waits we do here are generally so short that sleeping is a bad idea unless we have an IRQ to wake us up. Improves regression test performance from 18 minutes to 3.5 minutes on gen7, which is now consistent with the previous generation. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
-
Eric Anholt authored
Previous to this commit, testing easily reproduced a failure where the seqno would apparently arrive after the IRQ associated with it, with test programs as simple as: for (;;) { glCopyPixels(0, 0, 1, 1); glFinish(); } Various workarounds we've seen for previous generations didn't work to fix this issue, so until new information comes in, replace the IRQ waits on the BLT ring with polling. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
-