- 28 May, 2020 5 commits
-
-
Anson Huang authored
Convert the i.MX6SL clock binding to DT schema format using json-schema. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Rob Herring <robh@kernel.org>
-
Anson Huang authored
Convert the i.MX6SX clock binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX6Q clock binding to DT schema format using json-schema. Signed-off-by:
-
Sandeep Maheswaram authored
Add compatible for SC7180 in usb dwc3 bindings. Signed-off-by:
Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Sandeep Maheswaram authored
Convert USB DWC3 bindings to DT schema format using json-schema. Signed-off-by:
-
- 19 May, 2020 3 commits
-
-
Etienne Carriere authored
Introduce boolean property st,non-secure-otp for OTP data located in a factory programmed area that only secure firmware can access by default and that shall be reachable from the non-secure world. This change also allows additional properties for NVMEM nodes that were forbidden prior this change. Signed-off-by:
Etienne Carriere <etienne.carriere@st.com> Signed-off-by:
-
Geert Uytterhoeven authored
"258" is an odd power-of-two ;-) Obviously this is a typo, and the intended value is "256". Fixes: 7f3bf420 ("dt-bindings: at24: convert the binding document to yaml") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
chenqiwu authored
Currently, there are some descriptions of function not consistent with function name, fixing them will make the code more readable. Signed-off-by:
chenqiwu <chenqiwu@xiaomi.com> Signed-off-by:
-
- 18 May, 2020 2 commits
-
-
Kangmin Park authored
This is a trivial patch to fix node id to match the reg in example. Signed-off-by:
Kangmin Park <l4stpr0gr4m@gmail.com> Signed-off-by:
-
Oleksij Rempel authored
Convert the Qualcomm Atheros AR9330 High-Speed UART Device Tree binding documentation to json-schema. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
- 15 May, 2020 4 commits
-
-
Andre Przywara authored
A OHCI/EHCI controller could be behind an IOMMU, in which case an iommus property assigns the stream ID for this device. Allow that property in the DT bindings to fix a complaint about the Arm Juno board's DTS file. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Andre Przywara authored
Add the boolean dma-coherent property to the list of allowed properties, since some boards (Arm Juno) integrate the GPU this way. Signed-off-by:
-
Andre Przywara authored
The arm,gic-400 compatible is probably the best matching string for the GIC in most modern SoCs, but was only introduced later into the kernel. For historic reasons and to keep compatibility, some SoC DTs were thus using a combination of this name and one of the older strings, which currently the binding denies. Add a stanza to the DT binding to allow "arm,gic-400", followed by either "arm,cortex-a15-gic" or "arm,cortex-a7-gic". This fixes binding compliance for quite some SoC .dtsi files in the kernel tree. Signed-off-by:
-
Yoshihiro Kaneko authored
Convert the Renesas Interrupt Controller (INTC) for external pins Device Tree binding documentation to json-schema. Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Co-developed-by:
-
- 14 May, 2020 11 commits
-
-
Rob Herring authored
The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to for 1 cell address and size. In some cases with child devices having 2 cells, that doesn't make sense so a bus node is needed. Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Reviewed-by:
-
Rob Herring authored
The ti,j721e-ufs schema is missing an 'additionalProperties: false'. Add that and and the missing assigned-clock properties. Acked-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Rob Herring authored
The ti,j721e-ufs schema and example have a couple of problems related to address properties. First, the default #size-cells and #address-cells are 1 for examples, so they need to be overriden with a bus node. Second, address translation for the child ufs node is broken because 'ranges', '#address-cells', and '#size-cells' are missing from the schema. Acked-by:
-
Rob Herring authored
The 'ibm,usb-ehci-440epx' compatible has a 2nd 'reg' region, but the schema says there is only 1 region. Fix this. Cc: linux-usb@vger.kernel.org Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Rob Herring authored
The 'reg' description and example have a 2nd register region for memory mapped flash, but the schema says there is only 1 region. Fix this. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: linux-spi@vger.kernel.org Cc: linux-riscv@lists.infradead.org Acked-by:
Mark Brown <broonie@kernel.org> Acked-by:
Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by:
-
Lad Prabhakar authored
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible HSCIF ports, so document the SoC specific bindings. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible SCIFB ports, so document the SoC specific bindings. Signed-off-by:
-
Lad Prabhakar authored
RZ/G1H (R8A7742) SoC also has the R-Car gen2 compatible SCIF ports, so document the SoC specific bindings. Signed-off-by:
-
Lad Prabhakar authored
Document SoC specific bindings for RZ/G1H (r8a7742) SoC. Signed-off-by:
-
Serge Semin authored
Add "BAIKAL ELECTRONICS, JSC" to the list of devicetree vendor prefixes as "baikal". Website: http://www.baikalelectronics.comSigned-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@vger.kernel.org Cc: linux-pm@vger.kernel.org Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Vesa Jääskeläinen authored
Vaisala Oyj is a company based in Finland and also has subsidiaries in other countries. Vaisala develops, manufactures and markets innovative products and services for environmental and industrial measurement. https://www.vaisala.com/Signed-off-by:
Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by:
-
- 12 May, 2020 8 commits
-
-
Michal Simek authored
List U-Boot project in vendor prefixes. For more information take a look at: https://en.wikipedia.org/wiki/Das_U-Boot Source code is available here: https://gitlab.denx.de/u-boot/u-bootSigned-off-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Kunihiko Hayashi authored
Convert the UniPhier thermal monitor binding to DT schema format. Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Kunihiko Hayashi authored
Convert the UniPhier USB3-PHY controller for SS/HS to DT schema format. Signed-off-by:
-
Kunihiko Hayashi authored
Convert the UniPhier USB2-PHY conroller to DT schema format. Signed-off-by:
-
Kunihiko Hayashi authored
Convert the UniPhier PCIe-PHY controller to DT schema format. Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Renesas OS Timer (OSTM) Device Tree binding documentation to json-schema. Document missing properties. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Renesas Watchdog Timer (WDT) Controller Device Tree binding documentation to json-schema. Add missing "renesas,r8a77980-wdt" compatible value. Document missing properties. Update the example to match reality. Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Renesas General-Purpose Input/Output Ports (GPIO) Device Tree binding documentation to json-schema. Drop the deprecated "renesas,gpio-rcar" compatible value. Document missing properties. Drop the first example, as it doesn't add much value. Signed-off-by:
-
- 11 May, 2020 7 commits
-
-
Paul Cercueil authored
Convert the ingenic,uart.txt to a new ingenic,uart.yaml file. A few things were changed in the process: - the dmas and dma-names properties are now required. - the ingenic,jz4770-uart and ingenic,jz4775-uart compatible strings now require the ingenic,jz4760-uart string to be used as fallback, since the hardware is compatible. - the ingenic,jz4725b-uart compatible string was added, with a fallback to ingenic,jz4740-uart. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
Paul Cercueil authored
Convert the i2c-jz4780.txt file to ingenic,i2c.yaml. Two things were changed in the process: - the clock-frequency property can now only be set to the two values that can be set by the hardware; - the dmas and dma-names properties are now required. Signed-off-by:
-
Paul Cercueil authored
Convert the ingenic,intc.txt doc file to ingenic,intc.yaml. Some compatible strings now require a fallback, as the controller generally works the same across the SoCs families. Signed-off-by:
-
Paul Cercueil authored
Convert the ingenic,cgu.txt doc file to ingenic,cgu.yaml. The binding documentation has been updated as well. The node can have a child node that corresponds to the USB PHY, which happens to be present in the middle of the CGU registers. Signed-off-by:
-
Samuel Holland authored
This arch_timer property was added in commit c950ca8c ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability") but I omitted the device tree binding documentation. Now `make dtbs_check` prints the following warning for all A64 boards: timer: 'allwinner,erratum-unknown1' does not match any of the regexes: 'pinctrl-[0-9]+' Resolve this by documenting the erratum property. Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
Johan Jonker authored
A test with the command below gives this error: arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' With the conversion to yaml it also filters things in a node that are used by other drivers like 'power-domains' for Rockchip px30 usb nodes, so add them to 'dwc2.yaml'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Signed-off-by:
-
Johan Jonker authored
A test with the command below gives this error: arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: gpu@ff400000: '#cooling-cells', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' With the conversion to yaml it also filters things in a node that are used by other drivers like '#cooling-cells' and 'power-domains' for Rockchip px30 gpu nodes, so add them to 'arm,mali-bifrost.yaml'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-bifrost.yaml Signed-off-by:
-
