- 30 Nov, 2015 40 commits
-
-
Christophe JAILLET authored
commit eb8ed1eb upstream. Reference to the 'np' node is dropped before dereferencing the 'sizep' and 'basep' pointers, which could by then point to junk if the node has been freed. Refactor code to call 'of_node_put' later. Fixes: c5df3926 ("drivers/char/tpm: Add securityfs support for event log") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Peter Huewe <PeterHuewe@gmx.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Eric Dumazet authored
commit 1d6119ba upstream. This patch fixes following problems : 1) percpu_counter_init() can return an error, therefore init_frag_mem_limit() must propagate this error so that inet_frags_init_net() can do the same up to its callers. 2) If ip[46]_frags_ns_ctl_register() fail, we must unwind properly and free the percpu_counter. Without this fix, we leave freed object in percpu_counters global list (if CONFIG_HOTPLUG_CPU) leading to crashes. This bug was detected by KASAN and syzkaller tool (http://github.com/google/syzkaller) Fixes: 6d7b857d ("net: use lib/percpu_counter API for fragmentation mem accounting") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> [ kamal: backport to 3.19-stable: rename reassembly.c ] Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Yuchung Cheng authored
commit 9e45a3e3 upstream. Currently ca_seq_rtt_us does not use Kern's check. Fix that by checking if any packet acked is a retransmit, for both RTT used for RTT estimation and congestion control. Fixes: 5b08e47c ("tcp: prefer packet timing to TS-ECR for RTT") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Eric Dumazet authored
commit 161642e2 upstream. Recent TCP listener patches exposed a prior af_packet bug : match_fanout_group() blindly assumes it is always safe to cast sk to a packet socket to compare fanout with af_packet_priv But SYNACK packets can be sent while attached to request_sock, which are smaller than a "struct sock". We can read non existent memory and crash. Fixes: c0de08d0 ("af_packet: don't emit packet on orig fanout group") Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Johannes Berg authored
commit 8ec6d978 upstream. The ifmgd->ave_beacon_signal value cannot be taken as is for comparisons, it must be divided by since it's represented like that for better accuracy of the EWMA calculations. This would lead to invalid driver RSSI events. Fix the used value. Fixes: 615f7b9b ("mac80211: add driver RSSI threshold events") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tero Kristo authored
commit 62c8c20a upstream. mcp794xx alarm registers must be written in BCD format. However, the alarm programming logic neglected this by adding one to the value after bin2bcd conversion has been already done, writing bad values to month register in case the alarm being set is in October. In this case, the alarm month value becomes 0x0a instead of the expected 0x10. Fix by moving the +1 addition within the bin2bcd call also. Fixes: 1d1945d2 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips") Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Jay Vosburgh authored
commit 40baec22 upstream. Since commit 7d5cd2ce529b, when bond_enslave fails on devices that are not ARPHRD_ETHER, if needed, it resets the bonding device back to ARPHRD_ETHER by calling ether_setup. Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP if the bond device is up, leaving it in a quasi-down state without having actually gone through dev_close. For bonding, if any periodic work queue items are active (miimon, arp_interval, etc), those will remain running, as they are stopped by bond_close. At this point, if the bonding module is unloaded or the bond is deleted, the system will panic when the work function is called. This panic is resolved by calling dev_close on the bond itself prior to calling ether_setup. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 7d5cd2ce ("bonding: correctly handle bonding type change on enslave failure") Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Peter Feiner authored
commit 956959f6 upstream. The -i flag was incorrectly listed as a short flag for --no-inherit. It should have only been listed as a short flag for --input. This documentation error has existed since the --input flag was introduced in 6810fc91 (perf trace: Add option to analyze events in a file versus live). Signed-off-by: Peter Feiner <pfeiner@google.com> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1446657706-14518-1-git-send-email-pfeiner@google.com Fixes: 6810fc91 ("perf trace: Add option to analyze events in a file versus live") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Michal Kubeček authored
commit ebac62fe upstream. Both tunnel6_protocol and tunnel46_protocol share the same error handler, tunnel6_err(), which traverses through tunnel6_handlers list. For ipip6 tunnels, we need to traverse tunnel46_handlers as we do e.g. in tunnel46_rcv(). Current code can generate an ICMPv6 error message with an IPv4 packet embedded in it. Fixes: 73d605d1 ("[IPSEC]: changing API of xfrm6_tunnel_register") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Mathieu Desnoyers authored
commit a15920be upstream. The documentation on top of __DECLARE_TRACE() does not match its implementation since the condition check has been added to the RCU lockdep checks. Update the documentation to match its implementation. Link: http://lkml.kernel.org/r/1446504164-21563-1-git-send-email-mathieu.desnoyers@efficios.com CC: Dave Hansen <dave@sr71.net> Fixes: a05d59a5 "tracing: Add condition check to RCU lockdep checks" Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Arnd Bergmann authored
commit 777d738a upstream. create_request_message() computes the maximum length of a message, but uses the wrong type for the time stamp: sizeof(struct timespec) may be 8 or 16 depending on the architecture, while sizeof(struct ceph_timespec) is always 8, and that is what gets put into the message. Found while auditing the uses of timespec for y2038 problems. Fixes: b8e69066 ("ceph: include time stamp in every MDS request") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Chuck Lever authored
commit 7b3d770c upstream. ib_req_notify_cq(IB_CQ_REPORT_MISSED_EVENTS) returns a positive value if WCs were added to a CQ after the last completion upcall but before the CQ has been re-armed. Commit 7f23f6f6 ("xprtrmda: Reduce lock contention in completion handlers") assumed that when ib_req_notify_cq() returned a positive RC, the CQ had also been successfully re-armed, making it safe to return control to the provider without losing any completion signals. That is an invalid assumption. Change both completion handlers to continue polling while ib_req_notify_cq() returns a positive value. Fixes: 7f23f6f6 ("xprtrmda: Reduce lock contention in ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com> Tested-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Yinghai Lu authored
commit af86fa40 upstream. David reported that a T5-8 sparc system failed to boot with: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci 0000:00:01.0: can't claim BAR 15 [mem 0x100000000-0x4afffffff pref]: no compatible bridge window Note that we don't know about a host bridge aperture that contains BAR 15. OF does report a MEM64 aperture, but before this patch, pci_determine_mem_io_space() ignored it. Add support for host bridge apertures with 64-bit PCI addresses. Also set IORESOURCE_MEM_64 for PCI device and bridge resources in PCI 64-bit memory space. Sparc doesn't actually print the device and bridge resources, but after this patch, we should have the equivalent of this: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci_bus 0000:00: root bus resource [mem 0x800100000000-0x8007ffffffff] (bus address [0x100000000-0x7ffffffff]) pci 0000:00:01.0: bridge window [mem 0x800100000000-0x8004afffffff 64bit pref] [bhelgaas: changelog, URL to David's report] Fixes: d63e2e1f ("sparc/PCI: Clip bridge windows to fit in upstream windows") Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.comReported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Tested-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Florian Westphal authored
commit dbc3617f upstream. nfnetlink_bind request_module()s all the time as nfnetlink_get_subsys() shifts the argument by 8 to obtain the subsys id. So using type instead of type << 8 always returns NULL. Fixes: 03292745 ("netlink: add nlk->netlink_bind hook for module auto-loading") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Masahiro Yamada authored
commit 3f5ceec9 upstream. fdt_translate_address() returns OF_BAD_ADDR on error. It is defined as a u64 value, so the variable "addr" should be defined as u64 as well. Fixes: fb11ffe7 ("of/fdt: add FDT serial scanning for earlycon") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Munehisa Kamata authored
commit 94f9cd81 upstream. Commit 8b13eddf ("netfilter: refactor NAT redirect IPv4 to use it from nf_tables") has introduced a trivial logic change which can result in the following crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffffa033002d>] nf_nat_redirect_ipv4+0x2d/0xa0 [nf_nat_redirect] PGD 3ba662067 PUD 3ba661067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: ipv6(E) xt_REDIRECT(E) nf_nat_redirect(E) xt_tcpudp(E) iptable_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) nf_nat(E) nf_conntrack(E) ip_tables(E) x_tables(E) binfmt_misc(E) xfs(E) libcrc32c(E) evbug(E) evdev(E) psmouse(E) i2c_piix4(E) i2c_core(E) acpi_cpufreq(E) button(E) ext4(E) crc16(E) jbd2(E) mbcache(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) CPU: 0 PID: 2536 Comm: ip Tainted: G E 4.1.7-15.23.amzn1.x86_64 #1 Hardware name: Xen HVM domU, BIOS 4.2.amazon 05/06/2015 task: ffff8800eb438000 ti: ffff8803ba664000 task.ti: ffff8803ba664000 [...] Call Trace: <IRQ> [<ffffffffa0334065>] redirect_tg4+0x15/0x20 [xt_REDIRECT] [<ffffffffa02e2e99>] ipt_do_table+0x2b9/0x5e1 [ip_tables] [<ffffffffa0328045>] iptable_nat_do_chain+0x25/0x30 [iptable_nat] [<ffffffffa031777d>] nf_nat_ipv4_fn+0x13d/0x1f0 [nf_nat_ipv4] [<ffffffffa0328020>] ? iptable_nat_ipv4_fn+0x20/0x20 [iptable_nat] [<ffffffffa031785e>] nf_nat_ipv4_in+0x2e/0x90 [nf_nat_ipv4] [<ffffffffa03280a5>] iptable_nat_ipv4_in+0x15/0x20 [iptable_nat] [<ffffffff81449137>] nf_iterate+0x57/0x80 [<ffffffff814491f7>] nf_hook_slow+0x97/0x100 [<ffffffff814504d4>] ip_rcv+0x314/0x400 unsigned int nf_nat_redirect_ipv4(struct sk_buff *skb, ... { ... rcu_read_lock(); indev = __in_dev_get_rcu(skb->dev); if (indev != NULL) { ifa = indev->ifa_list; newdst = ifa->ifa_local; <--- } rcu_read_unlock(); ... } Before the commit, 'ifa' had been always checked before access. After the commit, however, it could be accessed even if it's NULL. Interestingly, this was once fixed in 2003. http://marc.info/?l=netfilter-devel&m=106668497403047&w=2 In addition to the original one, we have seen the crash when packets that need to be redirected somehow arrive on an interface which hasn't been yet fully configured. This change just reverts the logic to the old behavior to avoid the crash. Fixes: 8b13eddf ("netfilter: refactor NAT redirect IPv4 to use it from nf_tables") Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Sergei Shtylyov authored
commit 76d63c2b upstream. The "compatible" property text contradicts even the example given in the MMCIF binding document itself; moreover, the Renesas MMCIF driver only matches on the generic "compatible" string and doesn't look for the SoC specific strings at all. Thus describe "renesas,sh-mmcif" as a fallback value. Fixes: b4c27763 ("mmc: sh_mmcif: Document DT bindings") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Tony Lindgren authored
commit 75c08f17 upstream. Commit 68bab866 ("mfd: twl6040: Optional clk32k clock handling") added clock handling for the 32k clock from palmas-clk. However, that patch did not consider a typical situation where twl6040 is built-in, and palmas-clk is a loadable module like we have in omap2plus_defconfig. If palmas-clk is not loaded before twl6040 probes, we will get a "clk32k is not handled" warning during booting. This means that any drivers relying on this clock will mysteriously fail, including omap5-uevm WLAN and audio. Note that for WLAN, we probably should also eventually get the clk32kgaudio for MMC3 directly as that's shared between audio and WLAN SDIO at least for omap5-uevm. It seems the WLAN chip cannot get it as otherwise MMC3 won't get properly probed. Fixes: 68bab866 ("mfd: twl6040: Optional clk32k clock handling") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Ralf Baechle authored
commit f25319d2 upstream. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Fixes: f24219b4 (cherry picked from commit f0a232cde7be18a207fd057dd79bbac8a0a45dec) Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Linus Walleij authored
commit 7bdccef3 upstream. A static code checker found a memory leak in the Versatile ICST code. Fix it. Fixes: a183da63 "clk: versatile: respect parent rate in ICST clock" Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Arnd Bergmann authored
commit cc6a7aab upstream. The gss_key_timeout() function causes a harmless warning in some configurations, e.g. ARM imx_v6_v7_defconfig with gcc-5.2, if the compiler cannot figure out the state of the 'expire' variable across an rcu_read_unlock(): net/sunrpc/auth_gss/auth_gss.c: In function 'gss_key_timeout': net/sunrpc/auth_gss/auth_gss.c:1422:211: warning: 'expire' may be used uninitialized in this function [-Wmaybe-uninitialized] To avoid this warning without adding a bogus initialization, this rewrites the function so the comparison is done inside of the critical section. As a side-effect, it also becomes slightly easier to understand because the implementation now more closely resembles the comment above it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c5e6aecd ("sunrpc: fix RCU handling of gc_ctx field") Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Sakamoto authored
commit fef586d5 upstream. In former commit, metering is supported for BeBoB based models customized by M-Audio. The data in transaction is aligned to big-endianness, while in the driver code u16 typed variable is assigned to the data. This causes sparse warnings. bebob_maudio.c:651:31: warning: cast to restricted __be16 bebob_maudio.c:651:31: warning: cast to restricted __be16 bebob_maudio.c:651:31: warning: cast to restricted __be16 bebob_maudio.c:651:31: warning: cast to restricted __be16 This commit fixes this bug by using __be16 variable for the data. Fixes: 3149ac48('ALSA: bebob: Add support for M-Audio special Firewire series') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Sakamoto authored
commit 463543ac upstream. In former commit, snd_efw_command_get_phys_meters() was added to handle metering data. The given buffer is used to save transaction result and to convert between endianness. But this causes sparse warnings. fireworks_command.c:269:25: warning: incorrect type in argument 1 (different base types) fireworks_command.c:269:25: expected unsigned int [usertype] *p fireworks_command.c:269:25: got restricted __be32 [usertype] * This commit fixes this bug. Fixes: bde8a8f2('ALSA: fireworks: Add transaction and some commands') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Sakamoto authored
commit cbc6f280 upstream. In former commit, u32 data was assigned to __be32 variable instead of an int variable. This is not enough solution because it still causes sparse warnings. dice.c:80:23: warning: incorrect type in assignment (different base types) dice.c:80:23: expected restricted __be32 [usertype] value dice.c:80:23: got unsigned int dice.c:81:21: warning: restricted __be32 degrades to integer dice.c:81:46: warning: restricted __be32 degrades to integer This commit fixes this bug. Fixes: 7c2d4c0c('ALSA: dice: Split transaction functionality into a file') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Sakamoto authored
commit 3e93d42a upstream. Some local variables in some functions are typed as unsigned int, while __be32 value is assigned to them. This causes sparse warnings. dice-stream.c:50:17: warning: incorrect type in assignment (different base types) dice-stream.c:50:17: expected unsigned int [unsigned] channel dice-stream.c:50:17: got restricted __be32 [usertype] <noident> dice-stream.c:74:17: warning: incorrect type in assignment (different base types) dice-stream.c:74:17: expected unsigned int [unsigned] channel dice-stream.c:74:17: got restricted __be32 [usertype] <noident> This commit fixes this bug. Fixes: 288a8d0c('ALSA: dice: Change the way to start stream') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Lukas Wunner authored
commit 3c67d839 upstream. In its original version, drm_framebuffer_init() returned a negative int if drm_mode_object_get() failed (f453ba04, "DRM: add mode setting support"). This was accidentally disabled by commit 4b096ac1 ("drm: revamp locking around fb creation/destruction"). Thus, drm_framebuffer_init() pretends success if drm_mode_object_get() failed. Reinstate the original behaviour. Also fix erroneous kernel-doc of drm_mode_object_get(). Fixes: 4b096ac1 ("drm: revamp locking around fb creation/ destruction") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Takashi Sakamoto authored
commit df483388 upstream. When committed to upstream, these four modules had wrong entries for Makefile. This forces them to be loadable modules even if they're set as built-in. This commit fixes this bug. Fixes: b5b04336('ALSA: fireworks: Add skelton for Fireworks based devices') Fixes: fd6f4b0d('ALSA: bebob: Add skelton for BeBoB based devices') Fixes: 1a4e39c2('ALSA: oxfw: Move to its own directory') Fixes: 14ff6a09('ALSA: dice: Move file to its own directory') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Arnd Bergmann authored
commit 54c09889 upstream. The z2 machine calls pxa27x_set_pwrmode() in order to power off the machine, but this function gets discarded early at boot because it is marked __init, as pointed out by kbuild: WARNING: vmlinux.o(.text+0x145c4): Section mismatch in reference from the function z2_power_off() to the function .init.text:pxa27x_set_pwrmode() The function z2_power_off() references the function __init pxa27x_set_pwrmode(). This is often because z2_power_off lacks a __init annotation or the annotation of pxa27x_set_pwrmode is wrong. This removes the __init section modifier to fix rebooting and the build error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ba4a90a6 ("ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Charles Keepax authored
commit ce938001 upstream. The LDO1 driver is using the arizona_of_get_named_gpio helper function which will return 0 if an error was encountered whilst parsing the GPIO, as under the pdata scheme 0 was not being treated as a valid GPIO. However, since the regulator framework was expanded to allow the use of GPIO 0 this causes us to attempt to register GPIO 0 when we encountered an error parsing the device tree. This patch uses of_get_named_gpio directly and sets the ena_gpio_initialized flag based on the return value. Fixes: 1de3821a ("regulator: Set ena_gpio_initialized in regulator drivers") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Roger Quadros authored
commit e74eba04 upstream. The error handling path is broken as cawake_gpio was defined as unsigned integer causing the following warnings on boards that don't use SSI port and so don't have cawake_gpio defined. e.g. beagleboard C4. [ 30.094635] WARNING: CPU: 0 PID: 322 at drivers/gpio/gpiolib.c:86 gpio_to_desc+0xa4/0xb8() [ 30.103363] invalid GPIO -2 [ 30.106292] Modules linked in: omap_ssi_port(+) cpufreq_dt cfbfillrect cfbimgblt leds_gpio cfbcopyarea thermal_sys led_class hwmon gpio_keys encoder_tfp410 connector_analog_tv connector_dvi omap_hdq snd phy_i [ 30.145477] CPU: 0 PID: 322 Comm: modprobe Not tainted 4.3.0-rc4-00030-gca978c0-dirty #335 [ 30.154174] Hardware name: Generic OMAP3-GP (Flattened Device Tree) [ 30.160827] [<c0016ef4>] (unwind_backtrace) from [<c00131f4>] (show_stack+0x10/0x14) [ 30.168975] [<c00131f4>] (show_stack) from [<c033cf08>] (dump_stack+0x80/0x9c) [ 30.176635] [<c033cf08>] (dump_stack) from [<c003e920>] (warn_slowpath_common+0x7c/0xb8) [ 30.185180] [<c003e920>] (warn_slowpath_common) from [<c003e9f0>] (warn_slowpath_fmt+0x30/0x40) [ 30.194366] [<c003e9f0>] (warn_slowpath_fmt) from [<c0376314>] (gpio_to_desc+0xa4/0xb8) [ 30.202819] [<c0376314>] (gpio_to_desc) from [<c0376ac8>] (gpio_request_one+0x14/0x11c) [ 30.211273] [<c0376ac8>] (gpio_request_one) from [<c037370c>] (devm_gpio_request_one+0x3c/0x78) [ 30.220458] [<c037370c>] (devm_gpio_request_one) from [<bf184210>] (ssi_port_probe+0x118/0x504 [omap_ssi_port]) [ 30.231170] [<bf184210>] (ssi_port_probe [omap_ssi_port]) from [<c03d4cfc>] (platform_drv_probe+0x48/0xa4) [ 30.241424] [<c03d4cfc>] (platform_drv_probe) from [<c03d3678>] (driver_probe_device+0x1dc/0x2a0) [ 30.250793] [<c03d3678>] (driver_probe_device) from [<c03d37d0>] (__driver_attach+0x94/0x98) [ 30.259643] [<c03d37d0>] (__driver_attach) from [<c03d1d60>] (bus_for_each_dev+0x54/0x88) [ 30.268249] [<c03d1d60>] (bus_for_each_dev) from [<c03d2d50>] (bus_add_driver+0xe8/0x1f8) [ 30.276916] [<c03d2d50>] (bus_add_driver) from [<c03d4118>] (driver_register+0x78/0xf4) [ 30.285369] [<c03d4118>] (driver_register) from [<c03d5380>] (__platform_driver_probe+0x34/0xd8) [ 30.294647] [<c03d5380>] (__platform_driver_probe) from [<c00097e4>] (do_one_initcall+0x80/0x1d8) [ 30.303985] [<c00097e4>] (do_one_initcall) from [<c011617c>] (do_init_module+0x5c/0x1cc) [ 30.312561] [<c011617c>] (do_init_module) from [<c00c7a68>] (load_module+0x18c8/0x1f0c) [ 30.320983] [<c00c7a68>] (load_module) from [<c00c8188>] (SyS_init_module+0xdc/0x150) [ 30.329223] [<c00c8188>] (SyS_init_module) from [<c000f7e0>] (ret_fast_syscall+0x0/0x1c) Fixes: b209e047 ("HSI: Introduce OMAP SSI driver") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Geliang Tang authored
commit f098a045 upstream. When device_register() fails, kfree() is called in hsi_client_release(), hence there is no need to call kfree in err3 again. Fixes: a2aa2473 ("HSI: Add common DT binding for HSI client devices") Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Sifan Naeem authored
commit 58b0497d upstream. The requested bit rate can be outside the range supported by the driver. The maximum bit rate this driver supports at the moment is 400Khz. If the requested bit rate is larger than the maximum supported by the driver, set the bitrate to the maximum supported before bitrate_khz is calculated. Maximum speed supported by the driver can be increased to 1Mhz by adding support for "fast plus mode" in the future. Fixes: commit 27bce457 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Sifan Naeem authored
commit 1ed6faed upstream. Clear line status and all generated interrupts from the interrupt status register before starting a transfer, as we may have unserviced interrupts from previous transfers that might be handled in the context of the new transfer. Fixes: commit 27bce457 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Sifan Naeem authored
commit 987008db upstream. Currently, after determining the minimum value for the High period (TCKH) the remainder of the internal clock pulses is set as the Low period (TCKL). This causes the i2c clock duty cycle to be much less than 50%. Modify the starting position to TCKH and TCKL at 50% of the internal clock, and adjusts the TCKH and TCKL values from there should the minimum value for TCKL not be met. This results in duty cycles closer to 50%. Fixes: commit 27bce457 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Sifan Naeem authored
commit 5728d95f upstream. Using % can be slow depending on the architecture. Using DIV_ROUND_UP is nicer and more efficient way to do it. Fixes: commit 27bce457 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Sifan Naeem authored
commit 2aefb1bd upstream. Move scb_wr_rd_fence to before reading from fifo and writing to fifo to make sure the the first read/write is done after the required number of cycles. Fixes: commit 27bce457 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Sifan Naeem authored
commit 0e59378b upstream. The code to read from the master read fifo, and write to the master write fifo, checks a bit in an SCB register before every byte to ensure that the fifo is not full (write fifo) or empty (read fifo). Due to clock domain crossing inside the SCB block the updated value of this bit is only visible after 2 cycles. The scb_wr_rd_fence() function does 2 dummy writes (to the read-only revision register), and it's called before reading from or writing to the fifos to ensure that subsequent reads of the fifo status bits do not read stale values. As the 2 dummy writes are required in all versions of the ip, the version check is dropped. Fixes: commit 27bce457 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver") Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Eric W. Biederman authored
commit 850dcc4d upstream. After a packet has been encapsulated by a tunnel we should use the tunnel sockets local multicast loopback flag to control if the encapsulated packet should be locally loopback back. Pass sk into ip_local_out_sk so that in the rare case we are dealing with a tunneled packet whose tunnel destination address is a multicast address the kernel properly decides to loopback this packet. In practice I don't think this matters as ip_queue_xmit is used by tcp, l2tp and sctp none of which I am aware of uses ip level multicasting as they are all point to point communications protocols. Let's fix this before someone uses ip_queue_xmit for a tunnel protocol that does use multicast. Fixes: aad88724 ("ipv4: add a sock pointer to dst->output() path.") Fixes: b0270e91 ("ipv4: add a sock pointer to ip_queue_xmit()") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Flavio Leitner authored
commit 0647e708 upstream. Remove __nf_conntrack_find() from headers. Fixes: dcd93ed4 ("netfilter: nf_conntrack: remove dead code") Signed-off-by: Flavio Leitner <fbl@sysclose.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-
Dan Carpenter authored
commit 1f35d04a upstream. The iomap[] array has PCIM_IOMAP_MAX (6) elements and not DEVICE_COUNT_RESOURCE (16). This bug was found using a static checker. It may be that the "if (!(mask & (1 << i)))" check means we never actually go past the end of the array in real life. Fixes: ec04b075 ('iomap: implement pcim_iounmap_regions()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
-