- 17 Apr, 2024 14 commits
-
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. The vmcore ELF program headers describe virtual memory regions of a crashed kernel. User level tools use that information for the kernel text and data analysis (e.g vmcore-dmesg extracts the kernel log). Currently the kernel image is covered by program headers describing the identity mapping regions. But in the future the kernel image will be mapped into separate region outside of the identity mapping. Create the additional ELF program header that covers kernel image only, so that vmcore tools could locate kernel text and data. Further, the identity mapping in crashed and capture kernels will have different base address. Due to that __va() macro can not be used in the capture kernel. Instead, read crashed kernel identity mapping base address from os_info and use it for PT_LOAD type program headers creation. Acked-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com>
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. The virtual memory layout is needed for address translation by crash tool when /proc/kcore device is used as the memory image. Acked-by:
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. The virtual memory layout will be read out by makedumpfile, crash and other user tools for virtual address translation. Acked-by:
-
Alexander Gordeev authored
Introduce entries that do not reference any data in memory, but rather provide values. Set the size of such entries to zero and do not compute checksum for them, since there is no data which integrity needs to be checked. The integrity of the value entries itself is still covered by the os_info checksum. Reserve the lowest unused entry index OS_INFO_RESERVED for future use - presumably for the number of entries present. That could later be used by user level tools. The existing tools would not notice any difference. Acked-by:
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. Introduce .amode31 section address range AMODE31_START and AMODE31_END macros for later use. Acked-by:
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. Currently the identity mapping base address is implicit and is always set to zero. Make it explicit by putting into __identity_base persistent boot variable and use it in proper context - which is the value of PAGE_OFFSET. Acked-by:
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. Currently __kaslr_offset is the kernel offset in both physical memory on boot and in virtual memory after DAT mode is enabled. Uncouple these offsets and rename the physical address space variant to __kaslr_offset_phys while keep the name __kaslr_offset for the offset in virtual address space. Do not use __kaslr_offset_phys after DAT mode is enabled just yet, but still make it a persistent boot variable for later use. Use __kaslr_offset and __kaslr_offset_phys offsets in proper contexts and alter handle_relocs() function to distinguish between the two. Acked-by:
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. Put virtual memory layout information into a structure to improve code generation when accessing the structure members, which are currently only ident_map_size and __kaslr_offset. Acked-by:
-
Alexander Gordeev authored
Move everyting KASLR related to <asm/page.h>, similarly to many other architectures. Acked-by:
-
Alexander Gordeev authored
This is a preparatory rework to allow uncoupling virtual and physical addresses spaces. Currently the order of virtual memory areas is (the lowcore and .amode31 section are skipped, as it is irrelevant): identity mapping (the kernel is contained within) vmemmap vmalloc modules Absolute Lowcore Real Memory Copy In the future the kernel will be mapped separately and placed to the end of the virtual address space, so the layout would turn like this: identity mapping vmemmap vmalloc modules Absolute Lowcore Real Memory Copy kernel However, the distance between kernel and modules needs to be as little as possible, ideally - none. Thus, the Absolute Lowcore and Real Memory Copy areas would stay in the way and therefore need to be moved as well: identity mapping vmemmap Absolute Lowcore Real Memory Copy vmalloc modules kernel To facilitate such layout swap the vmalloc and Absolute Lowcore together with Real Memory Copy areas. As result, the current layout turns into: identity mapping (the kernel is contained within) vmemmap Absolute Lowcore Real Memory Copy vmalloc modules This will allow to locate the kernel directly next to the modules once it gets mapped separately. Acked-by:
-
Alexander Gordeev authored
In case vmemmap array could overlap with vmalloc area on virtual memory layout setup, the size of vmalloc area is decreased. That could result in less memory than user requested with vmalloc= kernel command line parameter. Instead, reduce the size of identity mapping (and the size of vmemmap array as result) to avoid such overlap. Further, currently the virtual memmory allocation "rolls" from top to bottom and it is only VMALLOC_START that could get increased due to the overlap. Change that to decrease- only, which makes the whole allocation algorithm more easy to comprehend. Acked-by:
-
Alexander Gordeev authored
The maximum mappable physical address (as returned by arch_get_mappable_range() callback) is limited by the value of (1UL << MAX_PHYSMEM_BITS). The maximum physical address available to a DCSS segment is 512GB. In case the available online or offline memory size is less than the DCSS limit arch_get_mappable_range() would include never used [512GB..(1UL << MAX_PHYSMEM_BITS)] range. Acked-by:
-
Alexander Gordeev authored
vmemmap is forcefully set to start at MAX_PHYSMEM_BITS at most. That could be needed in the past to limit ident_map_size to MAX_PHYSMEM_BITS. However since commit 75eba6ec0de1 ("s390: unify identity mapping limits handling") ident_map_size is limited in setup_ident_map_size() function, which is called earlier. Another reason to limit vmemmap start to MAX_PHYSMEM_BITS is because it was returned by arch_get_mappable_range() as the maximum mappable physical address. Since commit f641679dfe55 ("s390/mm: rework arch_get_mappable_range() callback") that is not required anymore. As result, there is no neccessity to limit vmemmap starting address with MAX_PHYSMEM_BITS. Reviewed-by: -
Nina Schoetterl-Glausch authored
In order for SIE to interpretively execute STFLE, it requires the real or absolute address of a facility-list control block. Before writing the location into the shadow SIE control block, convert it from a virtual address. We currently do not run into this bug because the lower 31 bits are the same for virtual and physical addresses. Signed-off-by:
Nina Schoetterl-Glausch <nsg@linux.ibm.com> Link: https://lore.kernel.org/r/20240319164420.4053380-3-nsg@linux.ibm.comSigned-off-by:
Janosch Frank <frankja@linux.ibm.com> Message-Id: <20240319164420.4053380-3-nsg@linux.ibm.com> Signed-off-by:
-
- 12 Apr, 2024 6 commits
-
-
Peter Oberparleiter authored
The subchannel-type field "st" of s390_cio_stsch and s390_cio_msch tracepoints is incorrectly filled with the subchannel-enabled SCHIB value "ena". Fix this by assigning the correct value. Fixes: d1de8633 ("s390 cio: Rewrite trace point class s390_class_schib") Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
Peter Oberparleiter authored
Add a per-CHPID sysfs attribute named "speed_bps" that provides the operating speed of the associated channel path in bits per second, or 0 if the operating speed is not available. Example: $ cat /sys/devices/css0/chp0.32/speed_bps 32G Reviewed-by:
Vineeth Vijayan <vneethv@linux.ibm.com> Acked-by:
-
Peter Oberparleiter authored
A channel-path's channel-measurement-group value (CMG) determines the format of associated measurement data and characteristics blocks. Both blocks are of fixed size and contain a generic and CMG-dependent part. Currently CIO exports these data blocks via sysfs only for a specific list of CMGs even though the kernel itself does not interpret CMG-dependent data. Change CIO to export measurement data and characteristics for all CMGs. This enables supporting new CMG data formats in userspace without the need for kernel changes. Reviewed-by:
-
Peter Oberparleiter authored
Add a per-CHPID binary sysfs attribute named "ext_measurement" that provides access to extended channel-path-measurement data for the associated channel path. Note that while not all channel-paths provide extended measurement data this attribute is created unconditionally for all channel paths because channel-path measurement capabilities might change during run-time. Reading from the attribute will only return data for channel-paths that support extended measurement data. Example: $ echo 1 > /sys/devices/css0/cm_enable $ xxd /sys/devices/css0/chp0.32/ext_measurement 00000000: 53e0 8002 0000 0095 0000 0000 59cc e034 S...........Y..4 00000010: 38b8 cc45 0000 0000 0000 0000 3e24 fe94 8..E........>$.. 00000020: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 00000030: 0000 0000 0000 0000 0000 0000 0000 0000 ................ Reviewed-by:
-
Peter Oberparleiter authored
Use attribute groups to simplify registration, removal and extension of measurement related sysfs attributes. Reviewed-by:
-
Peter Oberparleiter authored
Convert channel-utilization-block (CUB) address variables from separate named fields to arrays of addresses. Also simplify error handling and introduce named constants. This is done in preparation of introducing additional CUBs. Note: With this change the __packed annotation of secm_area is required to prevent an alignment hole that would otherwise occur due to the switch from u32 to dma64_t. Reviewed-by:
-
- 09 Apr, 2024 12 commits
-
-
Matthew Wilcox (Oracle) authored
Remove uses of deprecated page APIs, and move the check for large folios to here to avoid taking the folio lock if the folio is too large. We could do better here by attempting to split the large folio, but I'll leave that improvement for someone who can test it. Acked-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20240322161149.2327518-3-willy@infradead.orgSigned-off-by:
-
Matthew Wilcox (Oracle) authored
These page APIs are deprecated, so convert the incoming page to a folio and use the folio APIs instead. The ultravisor API cannot handle large folios, so return -EINVAL if one has slipped through. Acked-by:
-
Thomas Richter authored
The CPU Measurement facility crypto counter set functionality is defined by the Second Counter Version Number. This number varies between machine types, but is upward compatible. Lessen the checks to reflect this behavior. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Acked-by:
Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Common pattern in non-verbose build output for quiet commands is that the shorthand of a command including whitespace contains at least eight characters. Adjust this for the RELOCS command, which comes only with seven characters. Before: SORTTAB vmlinux CC arch/s390/boot/version.o RELOCS arch/s390/boot/relocs.S OBJCOPY arch/s390/boot/info.bin After: SORTTAB vmlinux CC arch/s390/boot/version.o RELOCS arch/s390/boot/relocs.S OBJCOPY arch/s390/boot/info.bin Signed-off-by:
-
Li Zhijian authored
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended. Cc: Vineeth Vijayan <vneethv@linux.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
Li Zhijian <lizhijian@fujitsu.com> Link: https://lore.kernel.org/r/20240314095209.1325229-1-lizhijian@fujitsu.comSigned-off-by:
-
Holger Dengler authored
The configuration option ZCRYPT_DEBUG is used only in ap queue code, so rename it to AP_DEBUG. It also no longer depends on ZCRYPT but on AP. While at it, also update the help text. Signed-off-by:
Holger Dengler <dengler@linux.ibm.com> Reviewed-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
-
Holger Dengler authored
There is no hard requirement to have the ap bus statically in the kernel, so add an option to compile it as module. Cc: Tony Krowiak <akrowiak@linux.ibm.com> Cc: Halil Pasic <pasic@linux.ibm.com> Signed-off-by:
Anthony Krowiak <akrowiak@linux.ibm.com> Signed-off-by:
-
Holger Dengler authored
The direct dependency of chsc and the AP bus prevents the modularization of ap bus. Introduce a notifier interface for AP changes, which decouples the producer of the change events (chsc) from the consumer (ap_bus). Remove the ap_cfg_chg() interface and replace it with the notifier invocation. The ap bus module registers a notification handler, which triggers the AP bus scan. Cc: Vineeth Vijayan <vneethv@linux.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
Holger Dengler authored
The inline function is_prot_virt_guest() in asm/uv.h makes use of the prot_virt_guest symbol. As this inline function can be called by other parts of the kernel (modules and built-in), the symbol should be exported, similar to the prot_virt_host symbol. One consumer of is_prot_virt_guest() will be the ap bus code. Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by:
-
Holger Dengler authored
The IRQ handler may rely on the bus or the root device. Register the adapter IRQ after setting up the bus and the root device to avoid any race conditions. Signed-off-by:
-
Holger Dengler authored
Rework the ap initialization and add missing cleanups to the error path. Errors during the registration of IRQ handler is now also detected. Suggested-by:
-
Holger Dengler authored
Since qci is available on most of the current machines, move away from the dynamic buffers for qci information and store it instead in a statically defined buffer. The new flags member in struct ap_config_info is now used as an indicator, if qci is available in the system (at least one of these bits is set). Suggested-by:
-
- 31 Mar, 2024 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Deduplicate Kconfig entries for CONFIG_CXL_PMU - Fix unselectable choice entry in MIPS Kconfig, and forbid this structure - Remove unused include/asm-generic/export.h - Fix a NULL pointer dereference bug in modpost - Enable -Woverride-init warning consistently with W=1 - Drop KCSAN flags from *.mod.c files * tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Fix typo HEIGTH to HEIGHT Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries kbuild: make -Woverride-init warnings more consistent modpost: do not make find_tosym() return NULL export.h: remove include/asm-generic/export.h kconfig: do not reparent the menu inside a choice block MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Fix more issues in the AMD FMPM driver * tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: RAS: Avoid build errors when CONFIG_DEBUG_FS=n RAS/AMD/FMPM: Safely handle saved records of various sizes RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Fix an unused function warning on irqchip/irq-armada-370-xp - Fix the IRQ sharing with pinctrl-amd and ACPI OSL * tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-370-xp: Suppress unused-function warning genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fixes from Borislav Petkov: - Define the correct set of default hw events on AMD Zen4 - Use the correct stalled cycles PMCs on AMD Zen2 and newer - Fix detection of the LBR freeze feature on AMD * tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later perf/x86/amd/lbr: Use freeze based on availability x86/cpufeatures: Add new word for scattered features
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timers update from Borislav Petkov: - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that tglx can relax more :-P * tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add co-maintainers for time[rs]
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: - Fix a format specifier build error in objtool during an x32 build * tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix compile failure when using the x32 compiler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Make sure single object builds in arch/x86/virt/ ala make ... arch/x86/virt/vmx/tdx/seamcall.o work again - Do not do ROM range scans and memory validation when the kernel is running as a SEV-SNP guest as those can get problematic and, before that, are not really needed in such a guest - Exclude the build-time generated vdso-image-x32.o object from objtool validation and in particular the return sites in there due to a warning which fires when an unpatched return thunk is being used - Improve the NMI CPUs stall message to show additional information about the state of each CPU wrt the NMI handler - Enable gcc named address spaces support only on !KCSAN configs due to compiler options incompatibility - Revert a change which was trying to use GB pages for mapping regions only when the regions would be large enough but that change lead to kexec failing - A documentation fixlet * tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Use obj-y to descend into arch/x86/virt/ x86/sev: Skip ROM range scans and validation for SEV-SNP guests x86/vdso: Fix rethunk patching for vdso-image-x32.o too x86/nmi: Upgrade NMI backtrace stall checks & messages x86/percpu: Disable named address spaces for KCSAN Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped." Documentation/x86: Fix title underline length
-
