An error occurred fetching the project authors.
- 21 Sep, 2022 13 commits
-
-
Daniel Miess authored
[Why] DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE shift and mask being missing [How] Add in shift and mask for ICH_RESET_AT_END_OF_LINE Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Daniel Miess <Daniel.Miess@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
[Why & How] Update after new measurment came in Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
-
Cruise Hung authored
[Why] When USB4 DP link training failed and fell back to lower link rate, the time slot calculation uses the verified_link_cap. And the verified_link_cap was not updated to the new one. It caused the wrong VC payload time-slot was allocated. [How] Updated verified_link_cap with the new one from cur_link_settings after the LT completes successfully. Reviewed-by:
Cruise Hung <Cruise.Hung@amd.com> Tested-by:
-
Meenakshikumar Somasundaram authored
[Why] During hot plug of specific 5K tiled display, sometimes both the tiles are not synchronized resulting in distortion. The reason is that otgs of both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa) is applied for bandwidth optimization. The otg workaround reenables otg but otg synchronization context is not reset and hence dc_trigger_sync() does not resynchronize otg again. [How] Implement reset_sync_context_for_pipe() to reset the otg synchronization context for the disabled pipe and its slave pipes when otg workaround is applied. Reviewed-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by:
-
George Shen authored
[Why] Current DCN3.2 logic for finding the dummy P-state index uses the DCN3.0 DML validation function instead of DCN3.2 DML. This can result in either unexpected DML VBA values, or unexpected dummy P-state index to be used. [How] Update the dummy P-state logic to use DCN3.2 DML validation function. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
George Shen <george.shen@amd.com> Tested-by:
-
zhikzhai authored
[why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
zhikzhai <zhikai.zhai@amd.com> Tested-by:
-
Hugo Hu authored
[Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by:
Hugo Hu <hugo.hu@amd.com> Tested-by:
-
Michael Strauss authored
[WHY] LTTPRs can in very rare instsances fail to increment DPCD LTTPR count. This results in aux-i LTTPR requests to be sent to the wrong DPCD address, which causes link training failure. [HOW] Override internal repeater count if fixed_vs flag is set for a given link Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Dmytro Laktyushkin authored
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by:
-
Leo Li authored
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Tested-by:
-
Alvin Lee authored
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
Chris Park authored
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by:
Chris Park <chris.park@amd.com> Tested-by:
-
Mukul Joshi authored
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
-
- 14 Sep, 2022 4 commits
-
-
Yifan Zhang authored
there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd engine exists and map/unmap SDMA queues to the non-existent engine. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Tim Huang <Tim.Huang@amd.com> Signed-off-by:
-
Alex Deucher authored
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
- 13 Sep, 2022 23 commits
-
-
Nathan Chancellor authored
This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f7 ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by:"Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by:
Maíra Canal <mairacanal@riseup.net> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Nathan Chancellor authored
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Nathan Chancellor authored
Several of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with LLVM 16 (1936 -> 1728), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Nathan Chancellor authored
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer created at the top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with LLVM 16 (2152 -> 1936), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Alvin Lee authored
Refactor calculation to remove floating point operations from dmub_srv. To ensure that 32-bit compilation works well, we use the div64 family of macros to do integer division for SubVP-related timing parameters. Cc: Maíra Canal <mairacanal@riseup.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Magali Lemes <magalilemes00@gmail.com> Tested-by:
Samson Tam <Samson.Tam@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Yao Wang1 authored
[Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by:
Yao Wang1 <Yao.Wang1@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] Kernel does not have a means to tell the userspace to use software cursor. Due to lack of this functionality, reducing the max cursor size is the only way to ensure that power savings of Subview port feature is utilized for asics that support it. The workaround could be removed after cursor caching is fixed while a subviewport config is active. Tested-by:
-
Alvin Lee authored
[Description] Leverage SW cursor fall back for SubVP when the cursor is too big. We want to take advantage of being able to fallback to SW cursor when possible because it's not worth it to disable MCLK switching because the cursor is slightly too big. Tested-by:
-
Taimur Hassan authored
[Why & How] When calculating cursor size for MALL allocation, the cursor width should be the actual width rounded up to 64 alignment. Additionally, the bit depth should vary depending on color format. Tested-by:
Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by:
-
Duncan Ma authored
[Why] The interpretation of the number of memory channels differ by memory type, and this affects channel width for the DML input. [How] Set dram channel width according to memory type for dcn314. Tested-by:
Duncan Ma <duncan.ma@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] HW can support the display swizzle modes for video, and those are preferable over standard or linear for decode use. [How] Remove the check for DCN314. Tested-by:
-
Nicholas Kazlauskas authored
[Why & How] Add support for the DML314 functions and hook up DCN314 to use them. This has some necessary additions for calculating Max VSTARTUP for future features, but there's also some changes that we have to make for pixel format/swizzle support. That will come in a following patch to make this transition easier to bisect. Tested-by:
-
Rodrigo Siqueira authored
We were not using the VBA and DLG files for DCN314, but the next sequence of changes for DCN314 will require those files. This commit adds the necessary files to the Makefile. Cc: Roman Li <roman.li@amd.com> Tested-by:
-
Rodrigo Siqueira authored
We have some compilation errors in some DML files from DCN314 that we never noticed because we were not compiling some of the DML files. This commit fixes those syntax errors before we enable the compilation. Cc: Roman Li <roman.li@amd.com> Tested-by:
-
Aric Cyr authored
[why] Incorrectly using MicroTileWidth instead of MacroTileWidth for calculations. [how] Remove all unused references to MicroTile and change them to MacroTile. Tested-by:
-
Leo Chen authored
[Why & How] DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software. Removed all instances of resetting the register to 0 Tested-by:
Leo Chen <sancchen@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] Update MBLK calculation according to hardware doc. For DCC case we were not allocation enough MALL due to an inaccurate MBLK calculation. Tested-by:
-
Aurabindo Pillai authored
This reverts commit a4f1b042 since returning false in case of SubVP results in no cursor being visible on desktop as there is no sw cursor fallback path on all platforms. Tested-by:
-
Candice Li authored
No need to reset error status since only umc ras supported on psp v13_0_0. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
Was missing before and would have resulted in a write to a non-existant register. Normally APUs don't use HDP, but other asics could use this code and APUs do use the HDP when used in passthrough. Reviewed-by:
-
Yang Wang authored
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by:
Yang Wang <KevinYang.Wang@amd.com> Reviewed-by:
-
Candice Li authored
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by:
-
