- 01 Jul, 2020 7 commits
-
-
Sam Ravnborg authored
Replace all uses of the legacy drm_bus_flags with their relevant _SAMPLE_ variant. This is a 1:1 replacement, no effort was made to validate the actual bus flags for the panels. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-6-sam@ravnborg.org
-
Sam Ravnborg authored
Drop use of the legacy drm_bus_flags member and use the more descriptive _SAMPLE_ variant. No functional change. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE Signed-off-by:
-
Sam Ravnborg authored
Use the non-legacy drm_bus_flag _SAMPLE_ member. No functional change. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE Signed-off-by:
-
Sam Ravnborg authored
Replace the legacy member with the more descriptive _DRIVE_ variant. No functional change. Signed-off-by:
-
Sam Ravnborg authored
Use the more descriptive _DRIVE_ variants thus avoiding the legacy drm_bus_flags values. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
-
Dmitry Osipenko authored
When graph isn't defined in a device-tree, the of_graph_get_remote_node() prints a noisy error message, telling that port node is not found. This is undesirable behaviour in our case because absence of a panel/bridge graph is a valid case. Let's check the graph's presence in a device-tree before proceeding with parsing of the graph. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
In some cases it's very useful to silently check whether port node exists at all in a device-tree before proceeding with parsing the graph. The DRM bridges code is one example of such case where absence of a graph in a device-tree is a legit condition. This patch adds of_graph_is_present() which returns true if given device-tree node contains OF graph port. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 30 Jun, 2020 9 commits
-
-
Laurent Pinchart authored
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus formats are valid for LVDS panels. Warn at probe time to catch the common mistake of using an incorrect format, as well as discrepancies between the bus format and the reported bpc. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The DRM bus flags reporting on which clock edge the pixel data and sync signals are sampled or driven don't make sense for LVDS panels, as the bus then uses sub-clock timings to send data. Drop those flags and add a warning in the probe function to make sure the mistake won't be repeated. Signed-off-by:
-
Laurent Pinchart authored
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Laurent Pinchart authored
The Starry KR070PE2T panel is a DPI panel, not and LVDS panel. Fix its connector type. Signed-off-by:
Pascal Roeleven <dev@pascalroeleven.nl> Signed-off-by:
-
Stanislav Lisovskiy authored
Added epoch counter checking to intel_encoder_hotplug in order to be able process all the connector changes, besides connection status. Also now any change in connector would result in epoch counter change, so no multiple checks are needed. v2: Renamed change counter to epoch counter. Fixed type name. v3: Fixed rebase conflict v4: Remove duplicate drm_edid_equal checks from hdmi and dp, lets use only once edid property is getting updated and increment epoch counter from there. Also lets now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v5: Fixed const modifiers, removed blank line v6: Removed drm specific part from this patch, leaving only i915 specific changes here. Signed-off-by:Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.comAcked-by:
Jani Nikula <jani.nikula@intel.com>
-
Stanislav Lisovskiy authored
This counter will be used by drm_helper_probe_detect caller to determine if anything had changed(including edid, connection status and etc). Hardware specific driver detect hooks are responsible for updating this counter when some change is detected to notify the drm part, which can trigger for example hotplug event. Also now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v2: Added documentation for the new counter. Rename change_counter to epoch_counter. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540Signed-off-by: -
Stanislav Lisovskiy authored
Many drivers would benefit from using drm helper to compare edid, rather than bothering with own implementation. v2: Added documentation for this function. Signed-off-by:
-
Maxime Ripard authored
The example used in the DPI binding before the conversion to YAML had a simple-panel example that got carried over to the YAML binding. However, that example doesn't match the simple-panel binding and results in validation errors. Since it's only marginally helpful, let's remove that part of the example entirely. Fixes: 09453600 ("dt-bindings: display: Convert VC4 bindings to schemas") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
-
Laurent Pinchart authored
Convert the Renesas R-Car LVDS encoder text binding to YAML. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
-
- 29 Jun, 2020 11 commits
-
-
Linus Walleij authored
The PL111 DRM driver is now the sole user of the external CLCD registers header file, so let's absorb that into the pl111_drm.h file and save the external include. Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-3-linus.walleij@linaro.org
-
Linus Walleij authored
All the functionality in this driver has been reimplemented in the new DRM driver in drivers/gpu/drm/pl111/* and all the boards using it have been migrated to use the DRM driver with all configuration coming from the device tree. I started the work to migrate the CLCD driver to DRM in april 2017 and it took a little more than 3 years to do this properly without leaving any platforms behind. Reviewed-by:
-
Linus Walleij authored
This moves over some of the credit for the development of this driver from the old fbdev driver that I used as reference when getting this in place. Reviewed-by:
-
Christian König authored
We only need the page array when the BO is about to be accessed. So not only populate, but also create it on demand. v2: move NULL check into ttm_tt_create() v3: fix the occurrence in ttm_bo_kmap_ttm as well Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/373182/
-
Christian König authored
Instead of signaling failure by setting the node pointer to NULL do so by returning -ENOSPC. v2: add memset() to make sure that mem is always initialized. v3: drop memset() only set mm_node = NULL, move mm_node init in amdgpu Signed-off-by:
-
Maarten Lankhorst authored
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8. Signed-off-by: -
Antonio Borneo authored
Some of these comments are part of the Linux GPU Driver Developer's Guide. Fix some minor typo in the comments and remove a repeated 'the'. Signed-off-by:
Antonio Borneo <antonio.borneo@st.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200626204252.44565-1-antonio.borneo@st.com
-
Emil Velikov authored
The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently using the generic write. This does not look right. Perhaps some platforms don't distinguish between the two writers? Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Fixes: e8395081 ("drm/dsi: Implement set tear scanline") Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Emil Velikov authored
A few of the new panels create a local macro wrapping around mipi_dsi_dcs_write. At the same time, they don't really care about the command/payload split. mipi_dsi_dcs_write does a kmalloc/memcpy/kfree for payload > 7 bytes. Avoid that all together by using the _buffer function. Aside: panel-xinpeng-xpp055c272.c calls its wrapper "generic" although it should be "dcs". But that for another day/patch. Cc: Heiko Stuebner <heiko@sntech.de> Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Emil Velikov authored
Currently the function heap allocates when we have any payload. Where in many case the payload is 1 byte - ouch. >From casual observation, vast majority of the payloads are smaller than 8 bytes - so use a stack array tx[8] to avoid the senseless kmalloc and kfree dance. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/gpu/drm/zte/zx_vga.c:158:2-3: Unneeded semicolon drivers/gpu/drm/zte/zx_vga.c:171:2-3: Unneeded semicolon drivers/gpu/drm/zte/zx_vga.c:179:2-3: Unneeded semicolon Signed-off-by:
Jason Yan <yanaijie@huawei.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
- 27 Jun, 2020 2 commits
-
-
Dmitry Osipenko authored
This patch adds missing BUS fields to the display panel descriptions of the panels which are found on NVIDIA Tegra devices: 1. AUO B101AW03 2. Chunghwa CLAA070WP03XG 3. Chunghwa CLAA101WA01A 4. Chunghwa CLAA101WB01 5. Innolux N156BGE L21 6. Samsung LTN101NT05 Suggested-by:
-
Dmitry Osipenko authored
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch corrects the panel's description. Reported-by:
-
- 26 Jun, 2020 5 commits
-
-
Nirmoy Das authored
GPU address handling is device specific and should be handle by its device driver. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Nirmoy Das authored
This patch uses score to select a new drm scheduler for better loadbalance between multiple drm schedulers instead of num_jobs. Below are test results after running amdgpu_test for ~10 times. Before this patch: sched_name num of many times it got schedule ========= ================================== sdma0 1463 sdma1 198 comp_1.0.1 280 After this patch: sched_name num of many times it got schedule ========= ================================== sdma0 925 sdma1 928 comp_1.0.1 177 comp_1.1.1 44 comp_1.2.1 43 comp_1.3.1 44 Signed-off-by:
-
Nirmoy Das authored
Store ttm bo->offset in struct nouveau_bo instead. Signed-off-by:
-
Nirmoy Das authored
Calculate GPU offset within vmwgfx driver itself without depending on bo->offset. Signed-off-by:
-
Harigovindan P authored
ti-sn65dsi86 bridge is enumerated as a runtime device. When suspend is triggered, PM core adds a refcount on all the devices and calls device suspend, since usage count is already incremented, runtime suspend will not be called and it kept the bridge regulators and gpios ON which resulted in platform not entering into XO shutdown. Add changes to force suspend on the runtime device during pm sleep. Signed-off-by:
Harigovindan P <harigovi@codeaurora.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200609120455.20458-1-harigovi@codeaurora.org
-
- 25 Jun, 2020 6 commits
-
-
Bhanuprakash Modem authored
[Why] It's useful to know the min and max vrr range for IGT testing. [How] Expose the min and max vfreq for the connector via a debugfs file on the connector, "vrr_range". Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range v2: * Fix the typo in max_vfreq (Manasi) * Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi) * Change the VRR capable to display Yes or No (Manasi) * Fix indentation checkpatch errors (Manasi) v3: * Remove the unnecessary debug print (Manasi) v4: * Rebase v5: * Rename to vrr_range to match AMD debugfs v6: * Rebase (manasi) v7: * Fix cmpilation due to rebase v8: * Move debugfs node creation logic to DRM (Emil) * Remove AMD specific logic (Emil) v9: * Separate patch for removal of AMD specific logic (Manasi) Signed-off-by:
Bhanuprakash Modem <bhanuprakash.modem@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> CC: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by:
-
Nirmoy Das authored
Switch over to GEM VRAM's implementation to retrieve bo->offset. Signed-off-by:
-
Nirmoy Das authored
Calculate GEM VRAM bo's offset within vram-helper without depending on bo->offset. Signed-off-by:
-
Nirmoy Das authored
This patch removes slot->gpu_offset which is not required as VRAM and PRIV slot are in separate PCI bar. This patch also removes unused qxl_bo_gpu_offset() Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Nirmoy Das authored
Calculate GPU offset in radeon_bo_gpu_offset without depending on bo->offset. Signed-off-by:
-
Nirmoy Das authored
GPU address should belong to driver not in memory management. This patch moves ttm bo.offset and gpu_offset calculation to amdgpu driver. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
