We support only one virtio_console device at a time. If multiple are
found, error out if one is already initialized.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This is nicer for modern R/O protection.  And noone needs it non-const, so
constify the callers as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
To: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linuxppc-dev@ozlabs.org

That way, we can make it const as is good kernel style.  We use a separate
indirection for the early console, rather than mugging ops.put_chars.

We rename it hv_ops, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Remove old lguest-style comments.

[Amit: - wingify comments acc. to kernel style
       - indent comments ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

vq operations depend on vq->data[i] being NULL to figure out if the vq
entry is in use (since the previous patch).

We have to initialize them to NULL to ensure we don't work with junk
data and trigger false BUG_ONs.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shirley Ma <xma@us.ibm.com>

There's currently no way for a virtio driver to ask for unused
buffers, so it has to keep a list itself to reclaim them at shutdown.
This is redundant, since virtio_ring stores that information.  So
add a new hook to do this.
Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Allow reading various alignment values from the config page.  This
allows the guest to much better align I/O requests depending on the
storage topology.

Note that the formats for the config values appear a bit messed up,
but we follow the formats used by ATA and SCSI so they are expected in
the storage world.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

virtio is communicating with a virtual "device" that actually runs on
another host processor. Thus SMP barriers can be used to control
memory access ordering.

Where possible, we should use SMP barriers which are more lightweight than
mandatory barriers, because mandatory barriers also control MMIO effects on
accesses through relaxed memory I/O windows (which virtio does not use)
(compare specifically smp_rmb and rmb on x86_64).

We can't just use smp_mb and friends though, because
we must force memory ordering even if guest is UP since host could be
running on another CPU, but SMP barriers are defined to barrier() in
that configuration. So, for UP fall back to mandatory barriers instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

With DEBUG defined, we add an ->in_use flag to detect if the caller
invokes two virtio methods in parallel.  The barriers attempt to ensure
timely update of the ->in_use flag.

But they're voodoo: if we need these barriers it implies that the
calling code doesn't have sufficient synchronization to ensure the
code paths aren't invoked at the same time anyway, and we want to
detect it.

Also, adding barriers changes timing, so turning on debug has more
chance of hiding real problems.

Thanks to MST for drawing my attention to this code...

CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Two years ago 5bbf89fc removed the horrible bzImage unpacking code.
Now it's time to remove the unneeded zlib.h include, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

When running under qemu-kvm-0.11.0:

	BUG: unable to handle kernel paging request at 56e58955
	...
	Process vballoon (pid: 1297, ti=c7976000 task=c70a6ca0 task.ti=c7
	...
	Call Trace:
	 [<c88253a3>] ? balloon+0x1b3/0x440 [virtio_balloon]
	 [<c041c2d7>] ? schedule+0x327/0x9d0
	 [<c88251f0>] ? balloon+0x0/0x440 [virtio_balloon]
	 [<c014a2d4>] ? kthread+0x74/0x80
	 [<c014a260>] ? kthread+0x0/0x80
	 [<c0103b36>] ? kernel_thread_helper+0x6/0x30

need_stats_update should be zero-initialized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Adam Litke <agl@us.ibm.com>

This is a fix for my earlier patch: "virtio: Add memory statistics reporting to
the balloon driver (V4)".

I discovered that all_vm_events() can sleep and therefore stats collection
cannot be done in interrupt context.  One solution is to handle the interrupt
by noting that stats need to be collected and waking the existing vballoon
kthread which will complete the work via stats_handle_request().  Rusty, is
this a saner way of doing business?

There is one issue that I would like a broader opinion on.  In stats_request, I
update vb->need_stats_update and then wake up the kthread.  The kthread uses
vb->need_stats_update as a condition variable.  Do I need a memory barrier
between the update and wake_up to ensure that my kthread sees the correct
value?  My testing suggests that it is not needed but I would like some
confirmation from the experts.
Signed-off-by: Adam Litke <agl@us.ibm.com>
To: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Changes since V3:
 - Do not do endian conversions as they will be done in the host
 - Report stats that reference a quantity of memory in bytes
 - Minor coding style updates

Changes since V2:
 - Increase stat field size to 64 bits
 - Report all sizes in kb (not pages)
 - Drop anon_pages stat and fix endianness conversion

Changes since V1:
 - Use a virtqueue instead of the device config space

When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests.  The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval.  The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure.  This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host.  A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.

This patch enables the guest-side support by adding stats collection and
reporting to the virtio balloon driver.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)

This is needed to compile with CONFIG_VIRTIO_PCI=y,
because virtio_pci_remove is marked __devexit.
Signed-off-by: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: BCM47xx: Fix 128MB RAM support
  MIPS: Highmem: Fix build error

Merge branch 'parisc/tracehook' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland

* 'parisc/tracehook' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  Revert "parisc: HAVE_ARCH_TRACEHOOK"

803bf5ec ("fs/exec.c: restrict initial
stack space expansion to rlimit") attempts to limit the initial stack to
20*PAGE_SIZE.  Unfortunately, in attempting ensure the stack is not
reduced in size, we ended up not changing the stack at all.

This size reduction check is not necessary as the expand_stack call does
this already.

This caused a regression in UML resulting in most guest processes being
killed.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jouni Malinen <j@w1.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 4410f391 ("fbdev: add support for
handoff from firmware to hw framebuffers") didn't add fb_destroy
operation to efifb.  Fix it and change aperture_size to match size
passed to request_mem_region.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15151Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reported-by: Alex Zhavnerchik <alex.vizor@gmail.com>
Tested-by: Alex Zhavnerchik <alex.vizor@gmail.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

geode-mfgpt: restore previous behavior for selecting IRQ

The MFGPT IRQ used to be, in order of decreasing priority,
 * IRQ supplied by the user as a boot-time parameter,
 * IRQ previously set by the BIOS or another driver,
 * default IRQ given at compile time.

Return to this behavior, which got broken when splitting the
MFGPT/clocksource driver for 2.6.33-rc1.
Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is retry of reverted 859ddf09
("idr: fix a critical misallocation bug") which contained two bugs.

* pa[idp->layers] should be cleared even if it's not used by
  sub_alloc() because it's used by mark idr_mark_full().

* The original condition check also assigned pa[l] to p which the new
  code didn't do thus leaving p pointing at the wrong layer.

Both problems have been fixed and the idr code has received good amount
testing using userland testing setup where simple bitmap allocator is
run parallel to verify the result of idr allocation.

The bug this patch fixes is caused by sub_alloc() optimization path
bypassing out-of-room condition check and restarting allocation loop
with starting value higher than maximum allowed value.  For detailed
description, please read commit message of 859ddf09.
Signed-off-by: Tejun Heo <tj@kernel.org>
Based-on-patch-from: Eric Paris <eparis@redhat.com>
Reported-by: Eric Paris <eparis@redhat.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

find_task_by_vpid() is not safe without rcu_read_lock().  2.6.33-rc7 got
RCU protection for sys_setpriority() but missed it for sys_getpriority().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Presently the oom-killer is memcg aware and it finds the worst process
from processes under memcg(s) in oom.  Then, it kills victim's child
first.

It may kill a child in another cgroup and may not be any help for
recovery.  And it will break the assumption users have.

This patch fixes it.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ignoring the last page when ddr size is 128M. Cached accesses to last page
is causing the processor to prefetch using address above 128M stepping out
of the DDR address space.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/981/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/mm/highmem.c: In function 'kmap_init':
arch/mips/mm/highmem.c:130: error: 'init_mm' undeclared (first use in this function)
arch/mips/mm/highmem.c:130: error: (Each undeclared identifier is reported only once
arch/mips/mm/highmem.c:130: error: for each function it appears in.)
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/980/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This reverts commit 81bf550d.

HAVE_ARCH_TRACEHOOK requires defining the user_regset interfaces,
including task_user_regset_view().  parisc doesn't do that yet,
so don't lie about it.
Signed-off-by: Roland McGrath <roland@redhat.com>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Init struct probe_point and set counter correctly
  hw-breakpoint: Keep track of dr7 local enable bits
  hw-breakpoints: Accept breakpoints on NULL address
  perf_events: Fix FORK events

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: usbtouchscreen - extend coordinate range for Generaltouch devices
  Input: polldev can cause crash in case when polling disabled

Commit 84b79f8d (drm/i915: Fix crash
while aborting hibernation) attempted to fix a regression introduced
by commit cbda12d7 (drm/i915:
implement new pm ops for i915), but it went too far trying to split
the freeze/suspend and resume/thaw parts of the code.  As a result,
it introduced another regression, which only is visible on some systems.

Fix the problem by merging i915_drm_suspend() with
i915_drm_freeze() and moving some code from i915_resume()
into i915_drm_thaw(), so that intel_opregion_free() and
intel_opregion_init() are also executed in the freeze and thaw code
paths, respectively.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Pedro Ribeiro <pedrib@gmail.com>
Tested-by: Tino Keitel <tino.keitel@tikei.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clear struct probe_point before using it in
show_perf_probe_events(), and set pp->found counter correctly in
synthesize_perf_probe_point(). Without this initialization,
clear_probe_point() will free random addresses.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100218181652.26547.57790.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Generaltouch protocol allows for coordinates in [0, 0xffff] range and
there are devices reporting coordinates as high as 0x7fff so let's update
the driver to reflect that.
Signed-off-by: Roy Yin <yhch@generaltouch.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fix struct stat uid/gid types.

Commit 085219f7
("sparc32: use proper types in struct stat")

Accidently changed the struct stat uid/gid members
to uid_t and gid_t, but those get set to
__kernel_uid32_t and __kernel_gid32_t respectively.
Those are of type 'int' but the structure is meant
to have 'short'.  So use uid16_t and gid16_t to
correct this.
Reported-by: Rob Landley <rob@landley.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] bfin: fix max timeout calculation

Relying on overflow/wrap around isn't exact because if you wrap far
enough, you get back to "valid" values.
Reported-by: Thorsten Pohlmann <pohlmann@tetronik.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>

x86-32 has had a static test for copy_on_user() overflow for a while.
This test currently fails in mm/migrate.c resulting in an
allyesconfig/allmodconfig build failure on x86-32:

In function ‘copy_from_user’,
    inlined from ‘do_pages_stat’ at
    /home/hpa/kernel/git/mm/migrate.c:1012:
/home/hpa/kernel/git/arch/x86/include/asm/uaccess_32.h:212: error:
    call to ‘copy_from_user_overflow’ declared

Make the logic more explicit and therefore easier for gcc to
understand.

v2: rewrite the loop entirely using a more normal structure for a
    chunked-data loop (Linus Torvalds)
Reported-by: Len Brown <lenb@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-and-Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Arjan van de Ven <arjan@linux.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  CacheFiles: Fix a race in cachefiles_delete_object() vs rename
  vfs: don't call ima_file_check() unconditionally in nfsd_open()
  fs: inode - remove 8 bytes of padding on 64bits allowing 1 more objects/slab under slub
  Switch proc/self to nd_set_link()
  fix LOOKUP_FOLLOW on automount "symlinks"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB: bttv: Move I2C IR initialization
  V4L/DVB: Video : pwc : Fix regression in pwc_set_shutter_speed caused by bad 	constant => sizeof conversion.
  soc-camera: mt9t112: modify exiting conditions from standby mode
  V4L/DVB: cxusb: Select all required frontend and tuner modules
  V4L/DVB: dvb: l64781.ko broken with gcc 4.5

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: Remove DEBUG_FS dependency for mux name checking

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: allow alignment fault mode to be configured at kernel boot
  ARM: Update mach-types
  ARM: 5951/1: ARM: fix documentation of the PrimeCell bus
  ARM: 5950/1: ARM: Fix build error for arm1026ej-s processor
  MAINTAINERS: fix my e-mail and status for Gemini and FA526
  Gemini: wrong registers used to set reg_level in gpio_set_irq_type()
  ARM: 5944/1: scsi: fix timer setup in fas216.c
  ARM: 5938/1: ARM: L2: export outer_cache_fns

Some glibc versions intentionally create lots of alignment faults in
their gconv code, which if not fixed up, results in segfaults during
boot.  This can prevent systems booting properly.

There is no clear hard-configurable default for this; the desired
default depends on the nature of the userspace which is going to be
booted.

So, provide a way for the alignment fault handler to be configured via
the kernel command line.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>