- 08 May, 2013 1 commit
-
-
Dave Jones authored
[ 624.286653] vringh: module license 'unspecified' taints kernel. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
- 07 May, 2013 38 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteprocLinus Torvalds authored
Pull remoteproc update from Ohad Ben-Cohen: - Some refactoring, cleanups and small improvements from Sjur Brændeland. The improvements are mainly about better supporting varios virtio properties (such as virtio's config space, status and features). I now see that I messed up while commiting one of Sjur's patches and erroneously put myself as the author, as well as letting a nasty typo sneak in. I will not fix this in order to avoid rebasing the patches. Sjur - sorry! - A new remoteproc driver for OMAP-L13x (technically a DaVinci platform) from Robert Tivy. - Extend OMAP support to OMAP5 as well, from Vincent Stehlé. - Fix Kconfig VIRTUALIZATION dependency, from Suman Anna (a non-critical fix which arrived late during the rc cycle). * tag 'remoteproc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc: fix kconfig dependencies for VIRTIO remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP remoteproc: support default firmware name in rproc_alloc() remoteproc/omap: support OMAP5 too remoteproc: set vring addresses in resource table remoteproc: support virtio config space. remoteproc: perserve resource table data remoteproc: calculate max_notifyid by counting vrings remoteproc: code cleanup of resource parsing remoteproc: parse STE-firmware and find resource table address remoteproc: add find_loaded_rsc_table firmware ops remoteproc: refactor rproc_elf_find_rsc_table()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsgLinus Torvalds authored
Pull rpmsg changes from Ohad Ben-Cohen: "A small pull request consisting of: - Make rpmsg process all pending messages instead of just one, from Robert Tivy - Fix Kconfig dependency on VIRTUALIZATION, from Suman. Note: this was submitted late during the 3.9 rc cycle and it seemed appropriate to wait with it for the merge window. - Belated addition of an rpmsg entry to the MAINTAINERS file. People seem to look for this" * tag 'rpmsg-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg: rpmsg: fix kconfig dependencies for VIRTIO MAINTAINERS: add rpmsg entry rpmsg: process _all_ pending messages in rpmsg_recv_done
-
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlockLinus Torvalds authored
Pullhwspinlock update from Ohad Ben-Cohen: "A single patch from Vincent extending OMAP's hwspinlock support to OMAP5" * tag 'hwspinlock-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock: hwspinlock/omap: support OMAP5 as well
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata maintainership change from Tejun Heo. Tejun is taking over from Jeff, after many many years. Thanks Jeff. * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: change maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull late ARM Exynos multiplatform changes from Arnd Bergmann: "These continue the multiplatform support for exynos, adding support for building most of the essential drivers (clocksource, clk, irqchip) when combined with other platforms. As a result, it should become really easy to add full multiplatform exynos support in 3.11, although we don't yet enable it for 3.10. The changes were not included in the earlier multiplatform series in order to avoid clashes with the other Exynos updates. This also includes work from Tomasz Figa to fix the pwm clocksource code on Exynos, which is not strictly required for multiplatform, but related to the other patches in this set and needed as a bug fix for at least one board." * tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: dts: exynops4210: really add universal_c210 dts ARM: dts: exynos4210: Add basic dts file for universal_c210 board ARM: dts: exynos4: Add node for PWM device ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core clocksource: samsung_pwm_timer: Correct programming of clock events clocksource: samsung_pwm_timer: Use proper clockevents max_delta clocksource: samsung_pwm_timer: Add support for non-DT platforms clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct clocksource: samsung_pwm_timer: Keep all driver data in a structure clocksource: samsung_pwm_timer: Make PWM spinlock global clocksource: samsung_pwm_timer: Let platforms select the driver Documentation: Add device tree bindings for Samsung PWM timers clocksource: add samsung pwm timer driver irqchip: exynos: look up irq using irq_find_mapping irqchip: exynos: pass irq_base from platform irqchip: exynos: localize irq lookup for ATAGS irqchip: exynos: allocate combiner_data dynamically irqchip: exynos: pass max combiner number to combiner_init ARM: exynos: add missing properties for combiner IRQs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates (part 2) from Arnd Bergmann: "These patches are all for Renesas shmobile, and depend on the earlier pinctrl updates. Remarkably, this adds support for three new SoCs: r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is for pinctrl (using the new subsystem) and for clocks (not yet using the common clock subsystem). The latter will have to get converted in one of the upcoming releases, but shmobile is not ready for that yet. The series also contains Renesas shmobile board changes, adding one board file for each of the three new SoCs. These boards are using a mix of classic and device-tree based probing, as there is still a lot of infrastructure in shmobile that has not been converted to DT yet. Once those are resolved to the degree that no board specific setup code is needed, they can get folded into the respective SoC setup files." * tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: shmobile: use r8a7790 timer setup code on Lager ARM: shmobile: force enable of r8a7790 arch timer ARM: shmobile: Add second I/O range for r8a7790 PFC ARM: shmobile: bockw: enable network settings on bootargs ARM: shmobile: bockw: add SMSC ethernet support ARM: shmobile: R8A7778: add Ether support ARM: shmobile: bockw: enable SMSC ethernet on defconfig ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin() ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO() ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection ARM: shmobile: mackerel: add interrupt names for SDHI0 ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio ARM: shmobile: mackerel: remove OCR masks, where regulators are used ARM: shmobile: mackerel: SDHI resources do not have to be numbered ARM: shmobile: Initial r8a7790 Lager board support ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support ARM: shmobile: APE6EVM base support ARM: shmobile: kzm9g-reference: add ethernet support ARM: shmobile: add R-Car M1A Bock-W platform support ...
-
Tejun Heo authored
Jeff is leaving for something more interesting and I'm inheriting the maintainership of libata. Thanks a lot for the good work and have fun, Jeff! v2: The original path forgot to update git tree URL. Updated. Spotted by Sergei. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull more vhost fixes from Michael Tsirkin: "This fixes some minor issues in the patches that have been merged. We also finally drop the workaround disabling event_idx for scsi: it was always questionable, and now we know it's not needed. There's also a memory leak fix" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-scsi: Enable VIRTIO_RING_F_EVENT_IDX vhost: drop virtio_net.h dependency vhost-net: Cleanup vhost_ubuf and vhost_zcopy vhost: Remove vhost_enable_zcopy in vhost.h vhost: Remove comments for hdr in vhost.h vhost: Move VHOST_NET_FEATURES to net.c vhost-net: Free ubuf when vhost_dev_set_owner fails vhost: Export vhost_dev_set_owner
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi: "This contains two patchsets from Maxim Patlasov. The first reworks the request throttling so that only async requests are throttled. Wakeup of waiting async requests is also optimized. The second series adds support for async processing of direct IO which optimizes direct IO and enables the use of the AIO userspace interface." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add flag to turn on async direct IO fuse: truncate file if async dio failed fuse: optimize short direct reads fuse: enable asynchronous processing direct IO fuse: make fuse_direct_io() aware about AIO fuse: add support of async IO fuse: move fuse_release_user_pages() up fuse: optimize wake_up fuse: implement exclusive wakeup for blocked_waitq fuse: skip blocking on allocations of synchronous requests fuse: add flag fc->initialized fuse: make request allocations for background processing explicit
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc updates from Benjamin Herrenschmidt: "Here are a few more powerpc bits that I would like in 3.10. Mostly remaining bolts & screw tightening of power8 support such as actually exposing the new features via the previously added AT_HWCAP2, and a few fixes, some of them for problems exposed recently like irqdomain warnings or sysfs access permission issues, some exposed by power8 hardware. The only change outside of arch/powerpc is a small one to irqdomain.c to allow silent failure to fix a problem on Cell where we get a dozen WARN_ON's tripping at boot for what is basically a normal case." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Make hard_irq_disable() do the right thing vs. irq tracing powerpc/topology: Fix spurr attribute permission powerpc/pci: Support per-aperture memory offset powerpc/cell/iommu: Improve error message for missing node powerpc/cell/spufs: Fix status attribute permission irqdomain: Allow quiet failure mode powerpc/pnv: Fix "compatible" property for P8 PHB powerpc/pci: Don't add bogus empty resources to PHBs powerpc/powerpnv: Properly handle failure starting CPUs powerpc/cputable: Advertise support for ISEL/HTM/DSCR/TAR on POWER8 powerpc/cputable: Advertise ISEL support on appropriate embedded processors powerpc/cputable: Advertise DSCR support on P7/P7+ powerpc/cputable: Reserve bits in HWCAP2 for new features powerpc/pseries: Perform proper max_bus_speed detection powerpc/pseries: Force 32 bit MSIs for devices that require it powerpc/tm: Fix null pointer deference in flush_hash_page powerpc/powernv: Defer OPAL exception handler registration powerpc: Emulate non privileged DSCR read and write
-
Linus Torvalds authored
Merge rwsem optimizations from Michel Lespinasse: "These patches extend Alex Shi's work (which added write lock stealing on the rwsem slow path) in order to provide rwsem write lock stealing on the fast path (that is, without taking the rwsem's wait_lock). I have unfortunately been unable to push this through -next before due to Ingo Molnar / David Howells / Peter Zijlstra being busy with other things. However, this has gotten some attention from Rik van Riel and Davidlohr Bueso who both commented that they felt this was ready for v3.10, and Ingo Molnar has said that he was OK with me pushing directly to you. So, here goes :) Davidlohr got the following test results from pgbench running on a quad-core laptop: | db_size | clients | tps-vanilla | tps-rwsem | +---------+----------+----------------+--------------+ | 160 MB | 1 | 5803 | 6906 | + 19.0% | 160 MB | 2 | 13092 | 15931 | | 160 MB | 4 | 29412 | 33021 | | 160 MB | 8 | 32448 | 34626 | | 160 MB | 16 | 32758 | 33098 | | 160 MB | 20 | 26940 | 31343 | + 16.3% | 160 MB | 30 | 25147 | 28961 | | 160 MB | 40 | 25484 | 26902 | | 160 MB | 50 | 24528 | 25760 | ------------------------------------------------------ | 1.6 GB | 1 | 5733 | 7729 | + 34.8% | 1.6 GB | 2 | 9411 | 19009 | + 101.9% | 1.6 GB | 4 | 31818 | 33185 | | 1.6 GB | 8 | 33700 | 34550 | | 1.6 GB | 16 | 32751 | 33079 | | 1.6 GB | 20 | 30919 | 31494 | | 1.6 GB | 30 | 28540 | 28535 | | 1.6 GB | 40 | 26380 | 27054 | | 1.6 GB | 50 | 25241 | 25591 | ------------------------------------------------------ | 7.6 GB | 1 | 5779 | 6224 | | 7.6 GB | 2 | 10897 | 13611 | + 24.9% | 7.6 GB | 4 | 32683 | 33108 | | 7.6 GB | 8 | 33968 | 34712 | | 7.6 GB | 16 | 32287 | 32895 | | 7.6 GB | 20 | 27770 | 31689 | + 14.1% | 7.6 GB | 30 | 26739 | 29003 | | 7.6 GB | 40 | 24901 | 26683 | | 7.6 GB | 50 | 17115 | 25925 | + 51.5% ------------------------------------------------------ (Davidlohr also has one additional patch which further improves throughput, though I will ask him to send it directly to you as I have suggested some minor changes)." * emailed patches from Michel Lespinasse <walken@google.com>: rwsem: no need for explicit signed longs x86 rwsem: avoid taking slow path when stealing write lock rwsem: do not block readers at head of queue if other readers are active rwsem: implement support for write lock stealing on the fastpath rwsem: simplify __rwsem_do_wake rwsem: skip initial trylock in rwsem_down_write_failed rwsem: avoid taking wait_lock in rwsem_down_write_failed rwsem: use cmpxchg for trying to steal write lock rwsem: more agressive lock stealing in rwsem_down_write_failed rwsem: simplify rwsem_down_write_failed rwsem: simplify rwsem_down_read_failed rwsem: move rwsem_down_failed_common code into rwsem_down_{read,write}_failed rwsem: shorter spinlocked section in rwsem_down_failed_common() rwsem: make the waiter type an enumeration rather than a bitmask
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull slab changes from Pekka Enberg: "The bulk of the changes are more slab unification from Christoph. There's also few fixes from Aaron, Glauber, and Joonsoo thrown into the mix." * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (24 commits) mm, slab_common: Fix bootstrap creation of kmalloc caches slab: Return NULL for oversized allocations mm: slab: Verify the nodeid passed to ____cache_alloc_node slub: tid must be retrieved from the percpu area of the current processor slub: Do not dereference NULL pointer in node_match slub: add 'likely' macro to inc_slabs_node() slub: correct to calculate num of acquired objects in get_partial_node() slub: correctly bootstrap boot caches mm/sl[au]b: correct allocation type check in kmalloc_slab() slab: Fixup CONFIG_PAGE_ALLOC/DEBUG_SLAB_LEAK sections slab: Handle ARCH_DMA_MINALIGN correctly slab: Common definition for kmem_cache_node slab: Rename list3/l3 to node slab: Common Kmalloc cache determination stat: Use size_t for sizes instead of unsigned slab: Common function to create the kmalloc array slab: Common definition for the array of kmalloc caches slab: Common constants for kmalloc boundaries slab: Rename nodelists to node slab: Common name for the per node structures ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild updates from Michal Marek: "Non-critical kbuild changes: - make coccicheck improvements, but no new semantic patches this time - make rpm improvements - make tar-pkg change to include the architecture in the filename. This is a deliberate incompatibility, but nobody has complained so far and it is useful if you build for different architectures. It also matches what the deb-pkg and rpm-pkg targets produce. - kbuild documentation fix" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: rpm-pkg: Remove pointless set -e statements rpm-pkg: Always regenerate the specfile rpm-pkg: Do not write to the parent directory rpm-pkg: Do not package the whole source directory buildtar: Add ARCH to the archive name Coccinelle: Fix patch output when coccicheck is used with M= and C= Coccinelle: Add support to the SPFLAGS variable Coccinelle: Cleanup the setting of the FLAGS and OPTIONS variables Coccinelle: Restore coccicheck verbosity in ONLINE mode (C=1 or C=2) scripts/package/Makefile: compare objtree with srctree instead of test KBUILD_OUTPUT doc: change example to existing Makefile fragment scripts/tags.sh: Add magic for OFFSET and DEFINE
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kconfig updates from Michal Marek: - use pkg-config to detect curses libraries - clean up the way curses headers are searched - Some randconfig fixes, of which one had to be reverted - KCONFIG_SEED for randconfig debugging - memuconfig memory leak plugged - menuconfig > breadcrumbs > navigation - xconfig compilation fix - Other minor fixes * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: fix lists definition for C++ Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" kconfig: implement KCONFIG_PROBABILITY for randconfig kconfig: allow specifying the seed for randconfig kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG kconfig: do not override symbols already set kconfig: fix randconfig tristate detection kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.h menuconfig: Add "breadcrumbs" navigation aid menuconfig: Fix memory leak introduced by jump keys feature merge_config.sh: Avoid creating unnessary source softlinks kconfig: optionally use pkg-config to detect ncurses libs menuconfig: optionally use pkg-config to detect ncurses libs
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild changes from Michal Marek: "Kbuild commits for v3.10-rc1: - Fix make mrproper after mod/file2alias rework - Fix ld-option Makefile function - Rewrite headers_install to shell to drop Perl dependency. There are some more patches I have to look at, so I might send another pull request later. Or just queue them for 3.11." * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Fix cleaning in scripts/mod headers_install.pl: convert to headers_install.sh kbuild: fix ld-option function
-
Li Zefan authored
Searching for PPC_EFIKA results in a segmentation fault, and it's because get_symbol_prop() returns NULL. In this case CONFIG_PPC_EFIKA is defined in arch/powerpc/platforms/ 52xx/Kconfig, so it won't be parsed if ARCH!=PPC, but menuconfig knows this symbol when it parses sound/soc/fsl/Kconfig: config SND_MPC52xx_SOC_EFIKA tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" depends on PPC_EFIKA This bug was introduced by commit bcdedcc1 ("menuconfig: print more info for symbol without prompts"). Reported-and-tested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Li Zefan <lizefan@huawei.com> Tested-by:
Libo Chen <libo.chen@huawei.com> Reviewed-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bruce Allan authored
A scheduling while atomic bug was introduced recently (by commit ce43a216: "e1000e: cleanup USLEEP_RANGE checkpatch checks"). Revert the particular instance of usleep_range() which causes the bug. Reported-by:
Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
Change explicit "signed long" declarations into plain "long" as suggested by Peter Hurley. Signed-off-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Reviewed-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
modify __down_write[_nested] and __down_write_trylock to grab the write lock whenever the active count is 0, even if there are queued waiters (they must be writers pending wakeup, since the active count is 0). Note that this is an optimization only; architectures without this optimization will still work fine: - __down_write() would take the slow path which would take the wait_lock and then try stealing the lock (as in the spinlocked rwsem implementation) - __down_write_trylock() would fail, but callers must be ready to deal with that - since there are some writers pending wakeup, they could have raced with us and obtained the lock before we steal it. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
This change fixes a race condition where a reader might determine it needs to block, but by the time it acquires the wait_lock the rwsem has active readers and no queued waiters. In this situation the reader can run in parallel with the existing active readers; it does not need to block until the active readers complete. Thanks to Peter Hurley for noticing this possible race. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
When we decide to wake up readers, we must first grant them as many read locks as necessary, and then actually wake up all these readers. But in order to know how many read shares to grant, we must first count the readers at the head of the queue. This might take a while if there are many readers, and we want to be protected against a writer stealing the lock while we're counting. To that end, we grant the first reader lock before counting how many more readers are queued. We also require some adjustments to the wake_type semantics. RWSEM_WAKE_NO_ACTIVE used to mean that we had found the count to be RWSEM_WAITING_BIAS, in which case the rwsem was known to be free as nobody could steal it while we hold the wait_lock. This doesn't make sense once we implement fastpath write lock stealing, so we now use RWSEM_WAKE_ANY in that case. Similarly, when rwsem_down_write_failed found that a read lock was active, it would use RWSEM_WAKE_READ_OWNED which signalled that new readers could be woken without checking first that the rwsem was available. We can't do that anymore since the existing readers might release their read locks, and a writer could steal the lock before we wake up additional readers. So, we have to use a new RWSEM_WAKE_READERS value to indicate we only want to wake readers, but we don't currently hold any read lock. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
This is mostly for cleanup value: - We don't need several gotos to handle the case where the first waiter is a writer. Two simple tests will do (and generate very similar code). - In the remainder of the function, we know the first waiter is a reader, so we don't have to double check that. We can use do..while loops to iterate over the readers to wake (generates slightly better code). Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
We can skip the initial trylock in rwsem_down_write_failed() if there are known active lockers already, thus saving one likely-to-fail cmpxchg. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
In rwsem_down_write_failed(), if there are active locks after we wake up (i.e. the lock got stolen from us), skip taking the wait_lock and go back to sleep immediately. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
Using rwsem_atomic_update to try stealing the write lock forced us to undo the adjustment in the failure path. We can have simpler and faster code by using cmpxchg instead. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
Some small code simplifications can be achieved by doing more agressive lock stealing: - When rwsem_down_write_failed() notices that there are no active locks (and thus no thread to wake us if we decided to sleep), it used to wake the first queued process. However, stealing the lock is also sufficient to deal with this case, so we don't need this check anymore. - In try_get_writer_sem(), we can steal the lock even when the first waiter is a reader. This is correct because the code path that wakes readers is protected by the wait_lock. As to the performance effects of this change, they are expected to be minimal: readers are still granted the lock (rather than having to acquire it themselves) when they reach the front of the wait queue, so we have essentially the same behavior as in rwsem-spinlock. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
When waking writers, we never grant them the lock - instead, they have to acquire it themselves when they run, and remove themselves from the wait_list when they succeed. As a result, we can do a few simplifications in rwsem_down_write_failed(): - We don't need to check for !waiter.task since __rwsem_do_wake() doesn't remove writers from the wait_list - There is no point releaseing the wait_lock before entering the wait loop, as we will need to reacquire it immediately. We can change the loop so that the lock is always held at the start of each loop iteration. - We don't need to get a reference on the task structure, since the task is responsible for removing itself from the wait_list. There is no risk, like in the rwsem_down_read_failed() case, that a task would wake up and exit (thus destroying its task structure) while __rwsem_do_wake() is still running - wait_lock protects against that. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
When trying to acquire a read lock, the RWSEM_ACTIVE_READ_BIAS adjustment doesn't cause other readers to block, so we never have to worry about waking them back after canceling this adjustment in rwsem_down_read_failed(). We also never want to steal the lock in rwsem_down_read_failed(), so we don't have to grab the wait_lock either. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
Remove the rwsem_down_failed_common function and replace it with two identical copies of its code in rwsem_down_{read,write}_failed. This is because we want to make different optimizations in rwsem_down_{read,write}_failed; we are adding this pure-duplication step as a separate commit in order to make it easier to check the following steps. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
This change reduces the size of the spinlocked and TASK_UNINTERRUPTIBLE sections in rwsem_down_failed_common(): - We only need the sem->wait_lock to insert ourselves on the wait_list; the waiter node can be prepared outside of the wait_lock. - The task state only needs to be set to TASK_UNINTERRUPTIBLE immediately before checking if we actually need to sleep; it doesn't need to protect the entire function. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michel Lespinasse authored
We are not planning to add some new waiter flags, so we can convert the waiter type into an enumeration. Background: David Howells suggested I do this back when I tried adding a new waiter type for unfair readers. However, I believe the cleanup applies regardless of that use case. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
Merge tag 'omap-for-v3.10/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/cleanup From Tony Lindgren <tony@atomide.com>: An urgent fix for a timer mismerge for and a regression fix for musb device naming change. * tag 'omap-for-v3.10/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686aSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Asias He authored
It was disabled as a workaround. Now userspace bits work fine with it. The broken version was not ever committed to QEMU, I guess the same is true for nlkt. So, let's enable it. Signed-off-by:
Asias He <asias@redhat.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Benjamin Herrenschmidt authored
If hard_irq_disable() is called while interrupts are already soft-disabled (which is the most common case) all is already well. However you can (and in some cases want) to call it while everything is enabled (to make sure you don't get a lazy even, for example before entry into KVM guests) and in this case we need to inform the irq tracer that the irqs are going off. We have to change the inline into a macro to avoid an include circular dependency hell hole. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Pekka Enberg authored
-
- 06 May, 2013 1 commit
-
-
Kishon Vijay Abraham I authored
After the device names are created using PLATFORM_DEVID_AUTO, the old device names given in usb_bind_phy are no longer valid causing the musb controller not to get the phy reference. Updated the usb_bind_phy with the new device names to get MUSB functional in omap4 panda. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-