- 21 Aug, 2023 19 commits
-
-
Zong-Zhe Yang authored
Sync Realtek Regulatory R43 and Realtek Channel Plan R64. 1. add entry for XK (Kosovo) 2. change TH (Thailand) to Realtek regd world-wide 3. configures Realtek 6 GHz regd for below countries * AR, MX, HT -> FCC * LB, ZA, BF, LA, MN -> ETSI Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230815120253.9901-1-pkshih@realtek.com
-
Dan Carpenter authored
The "buf" is skb->data that comes from the firmware. We want to print "len" number of bytes. But there is a missing period so the "len" variable is used for formatting (width) instead of limiting the output (precision). Fixes: cad2bd8a ("wifi: rtw89: support firmware log with formatted text") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/0700c7b9-bfd3-4aa6-82bf-5bf3c74644e1@moroto.mountain
-
Shiji Yang authored
For MAC_SYS_CTRL register, Bit[2] controls MAC_TX_EN and Bit[3] controls MAC_RX_EN (Bit index starts from 0). Therefore, 0x08 is the correct mask for RX. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB03150B571B67B896A504AC34BC0EA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
-
Yang Yingliang authored
Use eth_broadcast_addr() to assign broadcast address instead of memcpy(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230804090120.1332091-1-yangyingliang@huawei.com
-
Kuan-Chung Chen authored
Time Averaged SAR (TAS) tracks the amount of transmit power over a period of time and adjusts the power accordingly. Two thresholds are used to determine when to increase or reduce transmit power: Dynamic Power Reduction (DPR) on/off. Compared to Static SAR, which has a constant transmit power, TAS can improve the user experience or range extension. TAS can be enabled through BIOS, and the driver will evaluate Realtek ACPI DSM with RTW89_ACPI_DSM_FUNC_TAS_EN to determine whether TAS should be enabled. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230804053458.31492-1-pkshih@realtek.com
-
Ping-Ke Shih authored
A few samples get bad performance on 2GHz band, so use proper IQK command code and select another group to have wider range of calibration value. Fixes: f2abe804 ("wifi: rtw89: 8852b: rfk: add IQK") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803110150.8457-1-pkshih@realtek.com
-
Justin Stitt authored
The current implementation seems to reinvent what `kstrtoul` already does in terms of functionality and error handling. Remove uses of `simple_strtoul()` in favor of `kstrtoul()`. There is the following note at `lib/vsprintf.c:simple_strtoull()` which further backs this change: | * This function has caveats. Please use kstrtoull (or kstrtoul) instead. And here, simple_str* are explicitly deprecated [3]. This patch also removes an instance of the deprecated `strncpy` which helps [2]. Compile tested only. Link: https://lore.kernel.org/all/202308011602.3CC1C0244C@keescook/ [1] Link: https://github.com/KSPP/linux/issues/90 [2] Link: https://docs.kernel.org/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull [3] Cc: linux-hardening@vger.kernel.org Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230802-wifi-ipw2x00-refactor-v2-1-d33f765e9cd5@google.com
-
Dmitry Antipov authored
Fix comment typos around ' mwifiex_deaggr_sdio_pkt()' and 'mwifiex_host_to_card_mp_aggr()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230814142101.60308-2-dmantipov@yandex.ru
-
Dmitry Antipov authored
Remove unused and set but unused 'dfs_workqueue', 'dfs_work', and 'scan_channels' members of 'struct mwifiex_adapter', adjust users. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230814142101.60308-1-dmantipov@yandex.ru
-
Polaris Pi authored
Add missed return in mwifiex_uap_queue_bridged_pkt() and mwifiex_process_rx_packet(). Fixes: 11958528 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets") Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com> Reported-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230810083911.3725248-1-pinkperfect2021@gmail.com
-
Ruan Jinjie authored
Use is_zero_ether_addr() instead of ether_addr_equal() to check if the ethernet address is all zeros. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230808081023.2303423-1-ruanjinjie@huawei.com
-
Dmitry Antipov authored
In 'mwifiex_process_sta_txpd()' and 'mwifiex_process_uap_txpd()', replace 'BUG_ON()' with runtime check, and move all these checks to 'mwifiex_process_tx()'. This way, both callees may be converted to 'void', and the caller may be simplified as well. Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230802160726.85545-5-dmantipov@yandex.ru
-
Dmitry Antipov authored
Return -1 on possible 'mwifiex_write_reg()' errors in 'mwifiex_init_sdio_ioport()', do not ignore the value returned by the latter in 'mwifiex_init_sdio()' and 'mwifiex_sdio_up_dev()' as well. Found by Linux Verification Center (linuxtesting.org) with SVACE. Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230802160726.85545-4-dmantipov@yandex.ru
-
Dmitry Antipov authored
Return -EINVAL on possible 'sscanf()' errors in 'mwifiex_regrdwr_write()' and 'mwifiex_rdeeprom_write()'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230802160726.85545-3-dmantipov@yandex.ru
-
Dmitry Antipov authored
Drop unused fields 'status_code' of 'struct mwifiex_txinfo', 'dfs_chan_switch_timer', 'sleep_params' (including related data type 'struct mwifiex_sleep_params') of 'struct mwifiex_adapter', adjust related code. Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230802160726.85545-2-dmantipov@yandex.ru
-
Dmitry Antipov authored
Always free the zeroed page on return from 'mwifiex_histogram_read()'. Fixes: cbf6e055 ("mwifiex: add rx histogram statistics support") Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230802160726.85545-1-dmantipov@yandex.ru
-
Yang Li authored
Fix some kernel-doc comments to silence the warnings: drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Function parameter or member 'pf' not described in 'pds_client_register' drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Excess function parameter 'pf_pdev' description in 'pds_client_register' drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Function parameter or member 'pf' not described in 'pds_client_unregister' drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Excess function parameter 'pf_pdev' description in 'pds_client_unregister' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
sk_getsockopt() runs locklessly. This means sk->sk_lingertime can be read while other threads are changing its value. Other reads also happen without socket lock being held, and must be annotated. Remove preprocessor logic using BITS_PER_LONG, compilers are smart enough to figure this by themselves. v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning (Jakub) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
Add extack info for IPv4 address add/delete, which would be useful for users to understand the problem without having to read kernel code. No extack message for the ifa_local checking in __inet_insert_ifa() as it has been checked in find_matching_ifa(). Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Aug, 2023 12 commits
-
-
Furong Xu authored
1. XGMAC Core does not have hash_filter definition, it uses vlhash(VLAN Hash Filtering) instead, skip hash_filter when XGMAC. 2. Show exact size of Hash Table instead of raw register value. 3. Show full description of safety features defined by Synopsys Databook. 4. When safety feature is configured with no parity, or ECC only, keep FSM Parity Checking disabled. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hangbin Liu says: ==================== ipv6: update route when delete source address Currently, when remove an address, the IPv6 route will not remove the prefer source address when the address is bond to other device. Fix this issue and add related tests as Ido and David suggested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
Add a test case for IPv6 source address delete. As David suggested, add tests: - Single device using src address - Two devices with the same source address - VRF with single device using src address - VRF with two devices using src address As Ido points out, in IPv6, the preferred source address is looked up in the same VRF as the first nexthop device. This will give us similar results to IPv4 if the route is installed in the same VRF as the nexthop device, but not when the nexthop device is enslaved to a different VRF. So add tests: - src address and nexthop dev in same VR - src address and nexthop device in different VRF The link local address delete logic is different from the global address. It should only affect the associate device it bonds to. So add tests cases for link local address testing. Here is the test result: IPv6 delete address route tests Single device using src address TEST: Prefsrc removed when src address removed on other device [ OK ] Two devices with the same source address TEST: Prefsrc not removed when src address exist on other device [ OK ] TEST: Prefsrc removed when src address removed on all devices [ OK ] VRF with single device using src address TEST: Prefsrc removed when src address removed on other device [ OK ] VRF with two devices using src address TEST: Prefsrc not removed when src address exist on other device [ OK ] TEST: Prefsrc removed when src address removed on all devices [ OK ] src address and nexthop dev in same VRF TEST: Prefsrc removed from VRF when source address deleted [ OK ] TEST: Prefsrc in default VRF not removed [ OK ] TEST: Prefsrc not removed from VRF when source address exist [ OK ] TEST: Prefsrc in default VRF removed [ OK ] src address and nexthop device in different VRF TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ] TEST: Prefsrc not removed in default VRF [ OK ] TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ] TEST: Prefsrc removed in default VRF [ OK ] Table ID 0 TEST: Prefsrc removed from default VRF when source address deleted [ OK ] Link local source route TEST: Prefsrc not removed when delete ll addr from other dev [ OK ] TEST: Prefsrc removed when delete ll addr [ OK ] TEST: Prefsrc not removed when delete ll addr from other dev [ OK ] TEST: Prefsrc removed even ll addr still exist on other dev [ OK ] Tests passed: 19 Tests failed: 0 Suggested-by: Ido Schimmel <idosch@idosch.org> Suggested-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
After deleting an IPv6 address on an interface and cleaning up the related preferred source entries, it is important to ensure that all routes associated with the deleted address are properly cleared. The current implementation of rt6_remove_prefsrc() only checks the preferred source addresses bound to the current device. However, there may be routes that are bound to other devices but still utilize the same preferred source address. To address this issue, it is necessary to also delete entries that are bound to other interfaces but share the same source address with the current device. Failure to delete these entries would leave routes that are bound to the deleted address unclear. Here is an example reproducer (I have omitted unrelated routes): + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 1:2:3:4::5/64 dev dummy1 + ip route add 7:7:7:0::1 dev dummy1 src 1:2:3:4::5 + ip route add 7:7:7:0::2 dev dummy2 src 1:2:3:4::5 + ip -6 route show 1:2:3:4::/64 dev dummy1 proto kernel metric 256 pref medium 7:7:7::1 dev dummy1 src 1:2:3:4::5 metric 1024 pref medium 7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium + ip addr del 1:2:3:4::5/64 dev dummy1 + ip -6 route show 7:7:7::1 dev dummy1 metric 1024 pref medium 7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium As Ido reminds, in IPv6, the preferred source address is looked up in the same VRF as the first nexthop device, which is different with IPv4. So, while removing the device checking, we also need to add an ipv6_chk_addr() check to make sure the address does not exist on the other devices of the rt nexthop device's VRF. After fix: + ip addr del 1:2:3:4::5/64 dev dummy1 + ip -6 route show 7:7:7::1 dev dummy1 metric 1024 pref medium 7:7:7::2 dev dummy2 metric 1024 pref medium Reported-by: Thomas Haller <thaller@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2170513Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
As the initial commit 1a017276 ("selftests: Add VRF route leaking tests") said, the IPv6 MTU test fails as source address selection picking ::1. Every time we run the selftest this one report failed. There seems not much meaning to keep reporting a failure for 3 years that no one plan to fix/update. Let't just skip this one first. We can add it back when the issue fixed. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Rohr authored
addrconf_prefix_rcv returned early without releasing the inet6_dev pointer when the PIO lifetime is less than accept_ra_min_lft. Fixes: 5027d54a ("net: change accept_ra_min_rtr_lft to affect all RA lifetimes") Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Patrick Rohr <prohr@google.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Setting IP_RECVERR and IPV6_RECVERR options to zero currently purges the socket error queue, which was probably not expected for zerocopy and tx_timestamp users. I discovered this issue while preparing commit 6b5f43ea ("inet: move inet->recverr to inet->inet_flags"), I presume this change does not need to be backported to stable kernels. Add skb_errqueue_purge() helper to purge error messages only. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ruan Jinjie says: ==================== net: Return PTR_ERR() for fixed_phy_register() fixed_phy_register() returns not only -EIO or -ENODEV, but also -EPROBE_DEFER, -EINVAL and -EBUSY. The Best practice is to return these error codes with PTR_ERR(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ruan Jinjie authored
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -EIO. The Best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ruan Jinjie authored
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -ENODEV. The Best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ruan Jinjie authored
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -ENODEV. The best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
The user ports use RSGMII, but we don't have that, and DT doesn't specify a phy interface mode, so phylib defaults to GMII. These support 1G, 100M and 10M with flow control. It is unknown whether asymetric pause is supported at all speeds. The CPU port uses MII/GMII/RGMII/REVMII by hardware pin strapping, and support speeds specific to each, with full duplex only supported in some modes. Flow control may be supported again by hardware pin strapping, and theoretically is readable through a register but no information is given in the datasheet for that. So, we do a best efforts - and be lenient. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Aug, 2023 9 commits
-
-
David S. Miller authored
Ruan Jinjie says: ==================== net: Update and fix return value check for vcap_get_rule() As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), which would be more cleaner. So se IS_ERR() to update the return value and fix the issue in lan966x_ptp_add_trap(). Changes in v2: - Update vcap_get_rule() to always return an ERR_PTR(). - Update the return value fix in lan966x_ptp_add_trap(). - Update the return value check in sparx5_tc_free_rule_resources(). ==================== Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ruan Jinjie authored
As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), so use IS_ERR() to check the return value. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ruan Jinjie authored
As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), so use IS_ERR() to fix the return value issue. Fixes: 72df3489 ("net: lan966x: Add ptp trap rules") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ruan Jinjie authored
As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), which would be more cleaner in this case. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
xgene_mdio_status is declared static, and is only written once by the driver. It appears to have been this way since the driver was first added to the kernel tree. No other users can be found, so let's remove it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently any error during render leads to output an empty file. That is quite annoying when using tools/net/ynl/ynl-regen.sh which git greps files with content of "YNL-GEN.." and therefore ignores empty files. So once you fail to regen, you have to checkout the file. Avoid that by rendering to a temporary file first, only at the end copy the content to the actual destination. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kurt Kanzenbach authored
All captured timestamps should be corrected by PHY, MAC and CDC introduced latency/errors. The CDC correction is already used. Enable MAC propagation delay correction as well which is available since commit 26cfb838 ("net: stmmac: correct MAC propagation delay"). Before: |ptp4l[390.458]: rms 7 max 21 freq +177 +/- 14 delay 357 +/- 1 After: |ptp4l[620.012]: rms 7 max 20 freq +195 +/- 14 delay 345 +/- 1 Tested on Intel Elkhart Lake. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Johannes Zink <j.zink@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
skb_queue_purge() and __skb_queue_purge() become wrappers around the new generic functions. New SKB_DROP_REASON_QUEUE_PURGE drop reason is added, but users can start adding more specific reasons. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Guangguan Wang says: ==================== net/smc: several features's implementation for smc v2.1 This patch set implement several new features in SMC v2.1(https:// www.ibm.com/support/pages/node/7009315), including vendor unique experimental options, max connections per lgr negotiation, max links per lgr negotiation. v1 - v2: - rename field fce_v20 to fce_v2_base in struct smc_clc_first_contact_ext_v2x - use smc_get_clc_first_contact_ext in smc_connect _rdma_v2_prepare - adding comment about field vendor_oui in struct smc_clc_msg_smcd - remove comment about SMC_CONN_PER_LGR_MAX in smc_ clc_srv_v2x_features_validate - rename smc_clc_clnt_v2x_features_validate RFC v2 - v1: - more description in commit message - modify SMC_CONN_PER_LGR_xxx and SMC_LINKS_ADD_LNK_xxx macro defination and usage - rename field release_ver to release_nr - remove redundant release version check in client - explicitly set the rc value in smc_llc_cli/srv_add_link RFC v1 - RFC v2: - Remove ini pointer NULL check and fix code style in smc_clc_send_confirm_accept. - Optimize the max_conns check in smc_clc_xxx_v2x_features_validate. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-