- 13 Apr, 2022 17 commits
-
-
Kathiravan T authored
Sleep clock frequency should be 32768Hz. Lets fix it. Cc: stable@vger.kernel.org Fixes: 41dac73e ("arm64: dts: Add ipq8074 SoC and HK01 board support") Link: https://lore.kernel.org/all/e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.org/Signed-off-by:
Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1644581655-11568-1-git-send-email-quic_kathirav@quicinc.com
-
Dmitry Baryshkov authored
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Fixes: 7c1dffd4 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
-
Dmitry Baryshkov authored
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by:
-
Dmitry Baryshkov authored
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by:
-
Dmitry Baryshkov authored
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by:
-
Dmitry Baryshkov authored
The number of interrupt cells for the mdss interrupt controller is 1, meaning there should only be one cell for the interrupt number, not two. Drop the second cell containing (unused) irq flags. Reviewed-by:
-
Dmitry Baryshkov authored
Add device tree nodes for PCIe0/PCIe1 controllers and corresponding PHYs. Signed-off-by:
-
Dmitry Baryshkov authored
Enable PCIe0 host on SM8450 QRD device. Signed-off-by:
-
Dmitry Baryshkov authored
Enable PCIe0 PHY on the SM8450 QRD device. Signed-off-by:
-
Dmitry Baryshkov authored
Add device tree node for the second PCIe host found on the Qualcomm SM8450 platform. Signed-off-by:
-
Dmitry Baryshkov authored
Add device tree node for the second PCIe PHY device found on the Qualcomm SM8450 platform. Signed-off-by:
-
Dmitry Baryshkov authored
Add device tree node for the first PCIe host found on the Qualcomm SM8450 platform. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
Dmitry Baryshkov authored
Add device tree node for the first PCIe PHY device found on the Qualcomm SM8450 platform. Signed-off-by:
-
Taniya Das authored
Add the low pass audio clock controller device nodes. Signed-off-by:
Taniya Das <tdas@codeaurora.org> Reviewed-by:
-
Bjorn Andersson authored
-
Taniya Das authored
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic properties that are needed in a device tree. Also add clock ids for LPASS core clocks and audio clock IDs for LPASS client to request for the clocks. Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Kuldeep Singh authored
Qcom BAM DT spec expects generic DMA controller node name as "dma-controller" to enable validations. Signed-off-by:
Kuldeep Singh <singh.kuldeep87k@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- 12 Apr, 2022 23 commits
-
-
Stephan Gerhold authored
The huawei-g7 uses the msm8916-wcd-digital/analog audio codecs similar to apq8016-sbc, so we can mostly copy paste it from there to make audio work correctly. The main difference is the hphl-jack-type-normally-open property, which is needed to avoid inverted audio jack detection. Note that at least on my device the jack detection is not fully reliable: sometimes headphones are detected as headsets (with microphone). However, this is not a big problem for typical usage. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Stephan Gerhold authored
The comment with installation instructions in the huawei-g7 device tree is a bit misleading and does not describe the recommended installation steps very well. The bootloader is actually not patched; to avoid all trouble with the vendor bootloader it is easier to bypass it completely by jumping to a custom bootloader (e.g. based on the open-source LK released by Qualcomm). To avoid confusion, simplify the comment to state only the problem and then refer to the wiki article which contains detailed suggested installation instructions. This will also make it easier to keep it up to date with new developments in the future. Fixes: 55056b22 ("arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7") Signed-off-by:
-
Konrad Dybcio authored
Add nodes for dual Cirrus Logic CS35L41 audio amps connected via I2C. Signed-off-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
-
Shaik Sajida Bhanu authored
Add gcc hardware reset entries for eMMC and SD card. Signed-off-by:
Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Signed-off-by:
-
Douglas Anderson authored
The L2C rail on herobrine boards is intended to go to the audio codec. Let's override the 1.62V specified in the qcard.dtsi file to be 1.8V. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Bhupesh Sharma authored
Fix the following 'make dtbs_check' warning(s) by using phy@ instead of lanes@ and by moving '#clock-cells' to sub-node: arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: ssphy@78000: 'lane@78200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by:
Shawn Guo <shawn.guo@linaro.org> [bjorn: s/clock-names/clock-cells/ per Shawn's feedback] Signed-off-by:
-
Bhupesh Sharma authored
Fix the 'make dtbs_check' warning: arch/arm64/boot/dts/qcom/sm8450-qrd.dt.yaml: phy@1d87000: 'lanes@1d87400' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
Bhupesh Sharma authored
Fix the 'make dtbs_check' warning: arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml: phy@1c0e000: 'lanes@1c0e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
Bhupesh Sharma authored
The following properties are not supported and causing dtbs_check warnings. - vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml: phy@627000: 'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' Drop them from QMP PHY nodes for 'msm8996-xiaomi' dts. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: -
Stephan Gerhold authored
The BAM Data Multiplexer provides access to the network data channels of modems integrated into many older Qualcomm SoCs, including MSM8916. Add the nodes for the BAM DMA engine and BAM-DMUX to enable using WWAN on smartphones/tablets based on MSM8916. This should work out of the box with open-source WWAN userspace such as ModemManager. The nodes are disabled by default to avoid loading unnecessary drivers on devices that cannot use BAM-DMUX (e.g. DragonBoard 410c). However, strictly speaking the nodes could be enabled by default since both the bam_dma and bam_dmux driver will simply do nothing if the modem does not announce any BAM-DMUX channels. Signed-off-by:
-
Dmitry Baryshkov authored
Add PM8450 PMIC device tree include file. It is going to be used by SM8450-based devices. Signed-off-by:
-
Dmitry Baryshkov authored
Most of SoC device trees do not provide the thermal_zones label. Thus stop depending on it and use the full path to the thermal zones nodes. Fixes: 7a3544e5 ("arm64: dts: qcom: pmr735a: Add temp-alarm support") Signed-off-by:
-
Dmitry Baryshkov authored
Most of SoC device trees do not provide the thermal_zones label. Thus stop depending on it and use the full path to the thermal zones nodes. Fixes: 3795fe7d ("arm64: dts: qcom: pm8350c: Add temp-alarm support") Signed-off-by:
-
Dmitry Baryshkov authored
Add temp-alarm device tree node and a default configuration for the corresponding thermal zone for this PMIC. Temperatures are based on downstream values. Signed-off-by:
-
Dmitry Baryshkov authored
Add temp-alarm device tree node and a default configuration for the corresponding thermal zone for this PMIC. Temperatures are based on downstream values. Signed-off-by:
-
Dmitry Baryshkov authored
Add temp-alarm device tree node and a default configuration for the corresponding thermal zone for this PMIC. Temperatures are based on downstream values. Signed-off-by:
-
Baruch Siach authored
The IPQ60xx has the same MDIO bug block as IPQ4019. Add IO range and clock resources description. Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
Baruch Siach <baruch.siach@siklu.com> Signed-off-by:
-
Jami Kettunen authored
The OnePlus 5/5T both have an NXP PN553 which is supported by the nxp-nci-i2c driver in mainline. It detects/reads NFC tags using "nfctool" and with the NearD test scripts data can also be written to be received by another device. Signed-off-by:
Jami Kettunen <jami.kettunen@somainline.org> Reviewed-by:
Caleb Connolly <caleb@connolly.tech> Signed-off-by:
-
Sankeerth Billakanti authored
Rename the edp_out label in the sc7280 platform to mdss_edp_out so that the nodes related to mdss are all grouped together in the board specific files. Signed-off-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by:
-
Vinod Koul authored
Enable the ethernet node, add the phy node and pinctrl for ethernet. [bhsharma: Correct ethernet/rgmii related pinmuxs, specify multi-queues and plug in the PHY interrupt for WOL] Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Vinod Koul authored
SM8150 SoC supports ethqos ethernet controller so add the node for it Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Luca Weiss authored
Configure and enable the nodes for UFS that are used for internal storage on FP4. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
Luca Weiss authored
Add the necessary nodes for UFS and its PHY. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
