Add architectural preparation for CPUFreq driver, including: Kconfig,
register definition and platform device registration.

Some of LoongArch processors support DVFS, their IOCSR.FEATURES has
IOCSRF_FREQSCALE set. And they has a micro-core in the package called
SMC (System Management Controller) to scale frequency, voltage, etc.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.

DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.

BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add ARCH_HAS_DEBUG_VM_PGTABLE selection in Kconfig, in order to make
corresponding vm debug features usable on LoongArch. Also update the
corresponding arch-support.txt document.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs.  Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add support of kernel stack offset randomization while handling syscall,
the offset is defaultly limited by KSTACK_OFFSET_MAX().

In order to avoid triggering stack canaries (due to __builtin_alloca())
and slowing down the entry path, use __no_stack_protector attribute to
disable stack protector for do_syscall() at function level.

With this patch, the REPORT_STACK test show that:

	`loongarch64 bits of stack entropy: 7`
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add irq_work support for LoongArch via self IPIs. This make it possible
to run works in hardware interrupt context, which is a prerequisite for
NOHZ_FULL.

Implement:
 - arch_irq_work_raise()
 - arch_irq_work_has_interrupt()
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Some drivers want to use cpu_logical_map(), early_cpu_to_node() and some
other CPU mapping APIs, even if we use "nr_cpus=1" to hard limit the CPU
number. This is strongly required for the multi-bridges machines.

Currently, we stop parsing the MADT if the nr_cpus limit is reached, but
to achieve the above goal we should always enumerate the MADT table and
setup logical-physical CPU mapping whether there is a nr_cpus limit.

Rework the MADT enumeration:

1. Define a flag "cpu_enumerated" to distinguish the first enumeration
   (cpu_enumerated=0) and the physical hotplug case (cpu_enumerated=1)
   for set_processor_mask().

2. If cpu_enumerated=0, stop parsing only when NR_CPUS limit is reached,
   so we can setup logical-physical CPU mapping; if cpu_enumerated=1,
   stop parsing when nr_cpu_ids limit is reached, so we can avoid some
   runtime bugs. Once logical-physical CPU mapping is setup, we will let
   cpu_enumerated=1.

3. Use find_first_zero_bit() instead of cpumask_next_zero() to find the
   next zero bit (free logical CPU id) in the cpu_present_mask, because
   cpumask_next_zero() will stop at nr_cpu_ids.

4. Only touch cpu_possible_mask if cpu_enumerated=0, this is in order to
   avoid some potential crashes, because cpu_possible_mask is marked as
   __ro_after_init.

5. In prefill_possible_map(), clear cpu_present_mask bits greater than
   nr_cpu_ids, in order to avoid a CPU be "present" but not "possible".
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Chromium sandbox apparently wants to deny statx [1] so it could properly
inspect arguments after the sandboxed process later falls back to fstat.
Because there's currently not a "fd-only" version of statx, so that the
sandbox has no way to ensure the path argument is empty without being
able to peek into the sandboxed process's memory. For architectures able
to do newfstatat though, glibc falls back to newfstatat after getting
-ENOSYS for statx, then the respective SIGSYS handler [2] takes care of
inspecting the path argument, transforming allowed newfstatat's into
fstat instead which is allowed and has the same type of return value.

But, as LoongArch is the first architecture to not have fstat nor
newfstatat, the LoongArch glibc does not attempt falling back at all
when it gets -ENOSYS for statx -- and you see the problem there!

Actually, back when the LoongArch port was under review, people were
aware of the same problem with sandboxing clone3 [3], so clone was
eventually kept. Unfortunately it seemed at that time no one had noticed
statx, so besides restoring fstat/newfstatat to LoongArch uapi (and
postponing the problem further), it seems inevitable that we would need
to tackle seccomp deep argument inspection.

However, this is obviously a decision that shouldn't be taken lightly,
so we just restore fstat/newfstatat by defining __ARCH_WANT_NEW_STAT
in unistd.h. This is the simplest solution for now, and so we hope the
community will tackle the long-standing problem of seccomp deep argument
inspection in the future [4][5].

Also add "newstat" to syscall_abis_64 in Makefile.syscalls due to
upstream asm-generic changes.

More infomation please reading this thread [6].

[1] https://chromium-review.googlesource.com/c/chromium/src/+/2823150
[2] https://chromium.googlesource.com/chromium/src/sandbox/+/c085b51940bd/linux/seccomp-bpf-helpers/sigsys_handlers.cc#355
[3] https://lore.kernel.org/linux-arch/20220511211231.GG7074@brightrain.aerifal.cx/
[4] https://lwn.net/Articles/799557/
[5] https://lpc.events/event/4/contributions/560/attachments/397/640/deep-arg-inspection.pdf
[6] https://lore.kernel.org/loongarch/20240226-granit-seilschaft-eccc2433014d@brauner/T/#t

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch architecture changes for 6.11 depend on the asm-generic
changes to avoid confliction, so merge them to create a base.

Merge tag 'kbuild-fixes-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Make scripts/ld-version.sh robust against the latest LLD

 - Fix warnings in rpm-pkg with device tree support

 - Fix warnings in fortify tests with KASAN

* tag 'kbuild-fixes-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  fortify: fix warnings in fortify tests with KASAN
  kbuild: rpm-pkg: avoid the warnings with dtb's listed twice
  kbuild: Make ld-version.sh more robust against version string changes

When a software KASAN mode is enabled, the fortify tests emit warnings
on some architectures.

For example, for ARCH=arm, the combination of CONFIG_FORTIFY_SOURCE=y
and CONFIG_KASAN=y produces the following warnings:

    TEST    lib/test_fortify/read_overflow-memchr.log
  warning: unsafe memchr() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memchr.c
    TEST    lib/test_fortify/read_overflow-memchr_inv.log
  warning: unsafe memchr_inv() usage lacked '__read_overflow' symbol in lib/test_fortify/read_overflow-memchr_inv.c
    TEST    lib/test_fortify/read_overflow-memcmp.log
  warning: unsafe memcmp() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memcmp.c
    TEST    lib/test_fortify/read_overflow-memscan.log
  warning: unsafe memscan() usage lacked '__read_overflow' symbol in lib/test_fortify/read_overflow-memscan.c
    TEST    lib/test_fortify/read_overflow2-memcmp.log
  warning: unsafe memcmp() usage lacked '__read_overflow2' warning in lib/test_fortify/read_overflow2-memcmp.c
     [ more and more similar warnings... ]

Commit 9c2d1328 ("kbuild: provide reasonable defaults for tool
coverage") removed KASAN flags from non-kernel objects by default.
It was an intended behavior because lib/test_fortify/*.c are unit
tests that are not linked to the kernel.

As it turns out, some architectures require -fsanitize=kernel-(hw)address
to define __SANITIZE_ADDRESS__ for the fortify tests.

Without __SANITIZE_ADDRESS__ defined, arch/arm/include/asm/string.h
defines __NO_FORTIFY, thus excluding <linux/fortify-string.h>.

This issue does not occur on x86 thanks to commit 4ec4190b
("kasan, x86: don't rename memintrinsics in uninstrumented files"),
but there are still some architectures that define __NO_FORTIFY
in such a situation.

Set KASAN_SANITIZE=y explicitly to the fortify tests.

Fixes: 9c2d1328 ("kbuild: provide reasonable defaults for tool coverage")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/all/0e8dee26-41cc-41ae-9493-10cd1a8e3268@app.fastmail.com/Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

After 8d1001f7 (kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n),
the following warning "warning: File listed twice: *.dtb" is appearing for
every dtb file that is included.
The reason is that the commented commit already adds the folder
/lib/modules/%{KERNELRELEASE} in kernel.list file so the folder
/lib/modules/%{KERNELRELEASE}/dtb is no longer necessary, just remove it.

Fixes: 8d1001f7 ("kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

After [1] in upstream LLVM, ld.lld's version output became slightly
different when the cmake configuration option LLVM_APPEND_VC_REV is
disabled.

Before:

  Debian LLD 19.0.0 (compatible with GNU linkers)

After:

  Debian LLD 19.0.0, compatible with GNU linkers

This results in ld-version.sh failing with

  scripts/ld-version.sh: 18: arithmetic expression: expecting EOF: "10000 * 19 + 100 * 0 + 0,"

because the trailing comma is included in the patch level part of the
expression. While [1] has been partially reverted in [2] to avoid this
breakage (as it impacts the configuration stage and it is present in all
LTS branches), it would be good to make ld-version.sh more robust
against such miniscule changes like this one.

Use POSIX shell parameter expansion [3] to remove the largest suffix
after just numbers and periods, replacing of the current removal of
everything after a hyphen. ld-version.sh continues to work for a number
of distributions (Arch Linux, Debian, and Fedora) and the kernel.org
toolchains and no longer errors on a version of ld.lld with [1].

Fixes: 02aff859 ("kbuild: check the minimum linker version in Kconfig")
Link: https://github.com/llvm/llvm-project/commit/0f9fbbb63cfcd2069441aa2ebef622c9716f8dbb [1]
Link: https://github.com/llvm/llvm-project/commit/649cdfc4b6781a350dfc87d9b2a4b5a4c3395909 [2]
Link: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html [3]
Suggested-by: Fangrui Song <maskray@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull scheduler fixes from Borislav Petkov:

 - Fix a performance regression when measuring the CPU time of a thread
   (clock_gettime(CLOCK_THREAD_CPUTIME_ID,...)) due to the addition of
   PSI IRQ time accounting in the hotpath

 - Fix a task_struct leak due to missing to decrement the refcount when
   the task is enqueued before the timer which is supposed to do that,
   expires

 - Revert an attempt to expedite detaching of movable tasks, as finding
   those could become very costly. Turns out the original issue wasn't
   even hit by anyone

* tag 'sched_urgent_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Move psi_account_irqtime() out of update_rq_clock_task() hotpath
  sched/deadline: Fix task_struct reference leak
  Revert "sched/fair: Make sure to try to detach at least one movable task"

Pull x86 fix from Borislav Petkov:

 - Make sure TF is cleared before calling other functions (BHI
   mitigation in this case) in the SYSENTER compat handler, as
   otherwise it will warn about being in single-step mode

* tag 'x86_urgent_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bhi: Avoid warning in #DB handler due to BHI mitigation

Pull i2c fixes from Wolfram Sang:
 "Fixes for the I2C testunit, the Renesas R-Car driver and some
  MAINTAINERS corrections"

* tag 'i2c-for-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: testunit: avoid re-issued work after read message
  i2c: rcar: ensure Gen3+ reset does not disturb local targets
  i2c: mark HostNotify target address as used
  i2c: testunit: correct Kconfig description
  MAINTAINERS: VIRTIO I2C loses a maintainer, gains a reviewer
  MAINTAINERS: delete entries for Thor Thayer
  i2c: rcar: clear NO_RXDMA flag after resetting
  i2c: rcar: bring hardware to known state when probing

Pull smb client fix from Steve French:
 "Small fix, also for stable"

* tag '6.10-rc7-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix setting SecurityFlags to true

If you try to set /proc/fs/cifs/SecurityFlags to 1 it
will set them to CIFSSEC_MUST_NTLMV2 which no longer is
relevant (the less secure ones like lanman have been removed
from cifs.ko) and is also missing some flags (like for
signing and encryption) and can even cause mount to fail,
so change this to set it to Kerberos in this case.

Also change the description of the SecurityFlags to remove mention
of flags which are no longer supported.

Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'i2c-host-fixes-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

This tag includes three fixes for the Renesas R-Car driver:

 1. Ensures the device is in a known state after probing.
 2. Allows clearing the NO_RXDMA flag after a reset.
 3. Forces a reset before any transfer on Gen3+ platforms to
    prevent disruption of the configuration during parallel
    transfers.

Pull more networking fixes from Jakub Kicinski:
 "A quick follow up to yesterday's pull. We got a regressions report for
  the bnxt patch as soon as it got to your tree. The ethtool fix is also
  good to have, although it's an older regression.

  Current release - regressions:

   - eth: bnxt_en: fix crash in bnxt_get_max_rss_ctx_ring() on older HW
     when user tries to decrease the ring count

  Previous releases - regressions:

   - ethtool: fix RSS setting, accept "no change" setting if the driver
     doesn't support the new features

   - eth: i40e: remove needless retries of NVM update, don't wait 20min
     when we know the firmware update won't succeed"

* tag 'net-6.10-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
  bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()
  octeontx2-af: fix issue with IPv4 match for RSS
  octeontx2-af: fix issue with IPv6 ext match for RSS
  octeontx2-af: fix detection of IP layer
  octeontx2-af: fix a issue with cpt_lf_alloc mailbox
  octeontx2-af: replace cpt slot with lf id on reg write
  i40e: fix: remove needless retries of NVM update
  net: ethtool: Fix RSS setting

On older chips not supporting multiple RSS contexts, reducing
ethtool channels will crash:

BUG: kernel NULL pointer dereference, address: 00000000000000b8
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 7032 Comm: ethtool Tainted: G S                 6.10.0-rc4 #1
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
Code: c3 d3 eb 4c 8b 83 38 01 00 00 48 8d bb 38 01 00 00 4c 39 c7 74 42 41 8d 54 24 ff 31 c0 0f b7 d2 4c 8d 4c 12 02 66 85 ed 74 1d <49> 8b 90 b8 00 00 00 49 8d 34 11 0f b7 0a 66 39 c8 0f 42 c1 48 83
RSP: 0018:ffffaaa501d23ba8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8efdf600c940 RCX: 0000000000000000
RDX: 000000000000007f RSI: ffffffffacf429c4 RDI: ffff8efdf600ca78
RBP: 0000000000000080 R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000001 R11: ffffaaa501d238c0 R12: 0000000000000080
R13: 0000000000000000 R14: ffff8efdf600c000 R15: 0000000000000006
FS:  00007f977a7d2740(0000) GS:ffff8f041f840000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 00000002320aa004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x15/0x60
? page_fault_oops+0x157/0x440
? do_user_addr_fault+0x60/0x770
? _raw_spin_lock_irqsave+0x12/0x40
? exc_page_fault+0x61/0x120
? asm_exc_page_fault+0x22/0x30
? bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
? bnxt_get_max_rss_ctx_ring+0x25/0x90 [bnxt_en]
bnxt_set_channels+0x9d/0x340 [bnxt_en]
ethtool_set_channels+0x14b/0x210
__dev_ethtool+0xdf8/0x2890
? preempt_count_add+0x6a/0xa0
? percpu_counter_add_batch+0x23/0x90
? filemap_map_pages+0x417/0x4a0
? avc_has_extended_perms+0x185/0x420
? __pfx_udp_ioctl+0x10/0x10
? sk_ioctl+0x55/0xf0
? kmalloc_trace_noprof+0xe0/0x210
? dev_ethtool+0x54/0x170
dev_ethtool+0xa2/0x170
dev_ioctl+0xbe/0x530
sock_do_ioctl+0xa3/0xf0
sock_ioctl+0x20d/0x2e0

bp->rss_ctx_list is not initialized if the chip or firmware does not
support multiple RSS contexts.  Fix it by adding a check in
bnxt_get_max_rss_ctx_ring() before proceeding to reference
bp->rss_ctx_list.

Fixes: 0d1b7d6c ("bnxt: fix crashes when reducing ring count with active RSS contexts")
Reported-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/netdev/ZpFEJeNpwxW1aW9k@gmail.com/Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240712175318.166811-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fixes from David Sterba:
 "Fix a regression in extent map shrinker behaviour.

  In the past weeks we got reports from users that there are huge
  latency spikes or freezes. This was bisected to newly added shrinker
  of extent maps (it was added to fix a build up of the structures in
  memory).

  I'm assuming that the freezes would happen to many users after release
  so I'd like to get it merged now so it's in 6.10. Although the diff
  size is not small the changes are relatively straightforward, the
  reporters verified the fixes and we did testing on our side.

  The fixes:

   - adjust behaviour under memory pressure and check lock or scheduling
     conditions, bail out if needed

   - synchronize tracking of the scanning progress so inode ranges are
     not skipped or work duplicated

   - do a delayed iput when scanning a root so evicting an inode does
     not slow things down in case of lots of dirty data, also fix
     lockdep warning, a deadlock could happen when writing the dirty
     data would need to start a transaction"

* tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: avoid races when tracking progress for extent map shrinking
  btrfs: stop extent map shrinker if reschedule is needed
  btrfs: use delayed iput during extent map shrinking

Pull ceph fixes from Ilya Dryomov:
 "A fix for a possible use-after-free following "rbd unmap" or "umount"
  marked for stable and two kernel-doc fixups"

* tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-client:
  libceph: fix crush_choose_firstn() kernel-doc warnings
  libceph: suppress crush_choose_indep() kernel-doc warnings
  libceph: fix race between delayed_work() and ceph_monc_stop()

Pull pmdomain fix from Ulf Hansson:

 - qcom: Skip retention level for rpmhpd's

* tag 'pmdomain-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: qcom: rpmhpd: Skip retention level for Power Domains

Pull MMC host fixes from Ulf Hansson:

 - davinci_mmc: Prevent transmitted data size from exceeding sgm's
   length

 - sdhci: Fix max_seg_size for 64KiB PAGE_SIZE

* tag 'mmc-v6.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length
  mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of these changes are Qualcomm SoC specific and came in just after
  I sent out the last set of fixes. This includes two regression fixes
  for SoC drivers, a defconfig change to ensure the Lenovo X13s is
  usable and 11 changes to DT files to fix regressions and minor
  platform specific issues.

  Tony and Chunyan step back from their respective maintainership roles
  on the omap and unisoc platforms, and Christophe in turn takes over
  maintaining some of the Freescale SoC drivers that he has been taking
  care of in practice already.

  Lastly, there are two trivial fixes for the davinci and sunxi
  platforms"

* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
  MAINTAINERS: Add more maintainers for omaps
  ARM: davinci: Convert comma to semicolon
  MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
  Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
  arm64: dts: qcom: qdu1000: Fix LLCC reg property
  arm64: dts: qcom: sm6115: add iommu for sdhc_1
  arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
  arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
  soc: qcom: pmic_glink: disable UCSI on sc8280xp
  arm64: defconfig: enable Elan i2c-hid driver
  arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
  arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
  arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
  arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
  arm64: dts: allwinner: Fix PMIC interrupt number
  arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
  arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
  arm64: dts: qcom: sc8180x: Fix LLCC reg property again

Pull char / misc driver fixes from Greg KH:
 "Here are some small remaining driver fixes for 6.10-final that have
  all been in linux-next for a while and resolve reported issues.
  Included in here are:

   - mei driver fixes (and a spelling fix at the end just to be clean)

   - iio driver fixes for reported problems

   - fastrpc bugfixes

   - nvmem small fixes"

* tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: vsc: Fix spelling error
  mei: vsc: Enhance SPI transfer of IVSC ROM
  mei: vsc: Utilize the appropriate byte order swap function
  mei: vsc: Prevent timeout error with added delay post-firmware download
  mei: vsc: Enhance IVSC chipset stability during warm reboot
  nvmem: core: limit cell sysfs permissions to main attribute ones
  nvmem: core: only change name to fram for current attribute
  nvmem: meson-efuse: Fix return value of nvmem callbacks
  nvmem: rmem: Fix return value of rmem_read()
  misc: microchip: pci1xxxx: Fix return value of nvmem callbacks
  hpet: Support 32-bit userspace
  misc: fastrpc: Restrict untrusted app to attach to privileged PD
  misc: fastrpc: Fix ownership reassignment of remote heap
  misc: fastrpc: Fix memory leak in audio daemon attach operation
  misc: fastrpc: Avoid updating PD type for capability request
  misc: fastrpc: Copy the complete capability structure to user
  misc: fastrpc: Fix DSP capabilities request
  iio: light: apds9306: Fix error handing
  iio: trigger: Fix condition for own trigger

Pull tty / serial fixes from Greg KH:
 "Here are some small serial driver fixes for 6.10-final. Included in
  here are:

   - qcom-geni fixes for a much much much discussed issue and everyone
     now seems to be agreed that this is the proper way forward to
     resolve the reported lockups

   - imx serial driver bugfixes

   - 8250_omap errata fix

   - ma35d1 serial driver bugfix

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: qcom-geni: do not kill the machine on fifo underrun
  serial: qcom-geni: fix hard lockup on buffer flush
  serial: qcom-geni: fix soft lockup on sw flow control and suspend
  serial: imx: ensure RTS signal is not left active after shutdown
  tty: serial: ma35d1: Add a NULL check for of_node
  serial: 8250_omap: Fix Errata i2310 with RX FIFO level check
  serial: imx: only set receiver level if it is zero

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for
  6.10-final. Included in here are:

   - new usb-serial device ids for reported devices

   - syzbot-triggered duplicate endpoint bugfix

   - gadget bugfix for configfs memory overwrite

   - xhci resume bugfix

   - new device quirk added

   - usb core error path bugfix

  All of these have been in linux-next (most for a while) with no
  reported issues"

* tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: mos7840: fix crash on resume
  USB: serial: option: add Rolling RW350-GL variants
  USB: serial: option: add support for Foxconn T99W651
  USB: serial: option: add Netprisma LCUK54 series modules
  usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
  usb: dwc3: pci: add support for the Intel Panther Lake
  usb: core: add missing of_node_put() in usb_of_has_devices_or_graph
  USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
  USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
  xhci: always resume roothubs if xHC was reset during resume
  USB: serial: option: add Telit generic core-dump composition
  USB: serial: option: add Fibocom FM350-GL
  USB: serial: option: add Telit FN912 rmnet compositions

Pull sound fixes from Takashi Iwai:
 "The majority of changes here are small device-specific fixes for ASoC
  SOF / Intel and usual HD-audio quirks.

  The only significant high LOC is found in the Cirrus firmware driver,
  but all those are for hardening against malicious firmware blobs, and
  they look fine for taking as a last minute fix, too"

* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable Mute LED on HP 250 G7
  firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
  ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
  ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
  ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
  ASoC: rt711-sdw: add missing readable registers
  ASoC: SOF: Intel: hda: fix null deref on system suspend entry
  ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
  firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
  firmware: cs_dsp: Validate payload length before processing block
  firmware: cs_dsp: Return error if block header overflows file
  firmware: cs_dsp: Fix overflow checking of wmfw header

Pull more bcachefs fixes from Kent Overstreet:

 - revert the SLAB_ACCOUNT patch, something crazy is going on in memcg
   and someone forgot to test

 - minor fixes: missing rcu_read_lock(), scheduling while atomic (in an
   emergency shutdown path)

 - two lockdep fixes; these could have gone earlier, but were left to
   bake awhile

* tag 'bcachefs-2024-07-12' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: bch2_gc_btree() should not use btree_root_lock
  bcachefs: Set PF_MEMALLOC_NOFS when trans->locked
  bcachefs; Use trans_unlock_long() when waiting on allocator
  Revert "bcachefs: Mark bch_inode_info as SLAB_ACCOUNT"
  bcachefs: fix scheduling while atomic in break_cycle()
  bcachefs: Fix RCU splat

Srujana Challa says:

====================
Fixes for CPT and RSS configuration

This series of patches fixes various issues related to CPT
configuration and RSS configuration.

v1->v2:
- Excluded the patch "octeontx2-af: reduce cpt flt interrupt vectors for
  cn10kb" to submit it to net-next.
- Addressed the review comments.

Kiran Kumar K (1):
  octeontx2-af: Fix issue with IPv6 ext match for RSS
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.

Fixes: 41a7aa7b ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While performing RSS based on IPv6, extension ltype
is not being considered. This will be problem for
fragmented packets or packets with extension header.
Adding changes to match IPv6 ext header along with IPv6
ltype.

Fixes: 41a7aa7b ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.

Fixes: 21e6699e ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur <mmazur2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.

Fixes: de2854c8 ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.

Fixes: ae454086 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FREESCALE SOC DRIVERS has been orphaned since
commit eaac25d0 ("MAINTAINERS: Drop Li Yang as their email address
stopped working")
QUICC ENGINE LIBRARY has Qiang Zhao as maintainer but he hasn't
responded for years and when Li Yang was still maintaining FREESCALE
SOC DRIVERS he was also handling QUICC ENGINE LIBRARY directly.

As a maintainer of LINUX FOR POWERPC EMBEDDED PPC8XX AND PPC83XX, I
also need FREESCALE SOC DRIVERS to be actively maintained, so add
myself as maintainer of FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY.

See below link for more context.

Link: https://lore.kernel.org/linuxppc-dev/20240219153016.ntltc76bphwrv6hn@skbuf/T/#mf6d4a5eef79e8eae7ae0456a2794c01e630a6756Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There are many generations of omaps to maintain, and I will be only active
as a hobbyist with time permitting. Let's add more maintainers to ensure
continued Linux support.

TI is interested in maintaining the active SoCs such as am3, am4 and
dra7. And the hobbyists are interested in maintaining some of the older
devices, mainly based on omap3 and 4 SoCs.

Kevin and Roger have agreed to maintain the active TI parts. Both Kevin
and Roger have been working on the omap variants for a long time, and
have a good understanding of the hardware.

Aaro and Andreas have agreed to maintain the community devices. Both Aaro
and Andreas have long experience on working with the earlier TI SoCs.

While at it, let's also change me to be a reviewer for the omap1, and
drop the link to my old omap web page.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>