- 19 May, 2016 40 commits
-
-
Krzysztof Kozlowski authored
commit 3b672623 upstream. The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff instead of 0x1f) thus reading entire register as buck9's voltage. This effectively caused regulator core to interpret values as higher voltages than they were and then to set real voltage much lower than intended. The buck9 provides power to other regulators, including LDO13 and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower voltage caused SD card detection errors on Odroid XU3/XU4: mmc1: card never left busy state mmc1: error -110 whilst initialising SD card During driver probe the regulator core was checking whether initial voltage matches the constraints. With incorrect vsel_mask of 0xff and default value of 0x50, the core interpreted this as 5 V which is outside of constraints (3-3.775 V). Then the regulator core was adjusting the voltage to match the constraints. With incorrect vsel_mask this new voltage mapped to a vere low voltage in the driver. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wanpeng Li authored
commit f7c17d26 upstream. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0 Modules linked in: CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ #31 Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046 Call Trace: dump_stack+0x89/0xd4 __warn+0xfd/0x120 warn_slowpath_null+0x1d/0x20 rebind_workers+0x1c0/0x1d0 workqueue_cpu_up_callback+0xf5/0x1d0 notifier_call_chain+0x64/0x90 ? trace_hardirqs_on_caller+0xf2/0x220 ? notify_prepare+0x80/0x80 __raw_notifier_call_chain+0xe/0x10 __cpu_notify+0x35/0x50 notify_down_prepare+0x5e/0x80 ? notify_prepare+0x80/0x80 cpuhp_invoke_callback+0x73/0x330 ? __schedule+0x33e/0x8a0 cpuhp_down_callbacks+0x51/0xc0 cpuhp_thread_fun+0xc1/0xf0 smpboot_thread_fn+0x159/0x2a0 ? smpboot_create_threads+0x80/0x80 kthread+0xef/0x110 ? wait_for_completion+0xf0/0x120 ? schedule_tail+0x35/0xf0 ret_from_fork+0x22/0x50 ? __init_kthread_worker+0x70/0x70 ---[ end trace eb12ae47d2382d8f ]--- notify_down_prepare: attempt to take down CPU 0 failed This bug can be reproduced by below config w/ nohz_full= all cpus: CONFIG_BOOTPARAM_HOTPLUG_CPU0=y CONFIG_DEBUG_HOTPLUG_CPU0=y CONFIG_NO_HZ_FULL=y As Thomas pointed out: | If a down prepare callback fails, then DOWN_FAILED is invoked for all | callbacks which have successfully executed DOWN_PREPARE. | | But, workqueue has actually two notifiers. One which handles | UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE. | | Now look at the priorities of those callbacks: | | CPU_PRI_WORKQUEUE_UP = 5 | CPU_PRI_WORKQUEUE_DOWN = -5 | | So the call order on DOWN_PREPARE is: | | CB 1 | CB ... | CB workqueue_up() -> Ignores DOWN_PREPARE | CB ... | CB X ---> Fails | | So we call up to CB X with DOWN_FAILED | | CB 1 | CB ... | CB workqueue_up() -> Handles DOWN_FAILED | CB ... | CB X-1 | | So the problem is that the workqueue stuff handles DOWN_FAILED in the up | callback, while it should do it in the down callback. Which is not a good idea | either because it wants to be called early on rollback... | | Brilliant stuff, isn't it? The hotplug rework will solve this problem because | the callbacks become symetric, but for the existing mess, we need some | workaround in the workqueue code. The boot CPU handles housekeeping duty(unbound timers, workqueues, timekeeping, ...) on behalf of full dynticks CPUs. It must remain online when nohz full is enabled. There is a priority set to every notifier_blocks: workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down So tick_nohz_cpu_down callback failed when down prepare cpu 0, and notifier_blocks behind tick_nohz_cpu_down will not be called any more, which leads to workers are actually not unbound. Then hotplug state machine will fallback to undo and online cpu 0 again. Workers will be rebound unconditionally even if they are not unbound and trigger the warning in this progress. This patch fix it by catching !DISASSOCIATED to avoid rebind bound workers. Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Suggested-by:
Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Boris Brezillon authored
commit aab0a4c8 upstream. The memory range assigned to the PMC (Power Management Controller) was not including the PMC_PCR register which are used to control peripheral clocks. This was working fine thanks to the page granularity of ioremap(), but started to fail when we switched to syscon/regmap, because regmap is making sure that all accesses are falling into the reserved range. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by:
Richard Genoud <richard.genoud@gmail.com> Tested-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Miklos Szeredi authored
commit 9409e22a upstream. If a file is renamed to a hardlink of itself POSIX specifies that rename(2) should do nothing and return success. This condition is checked in vfs_rename(). However it won't detect hard links on overlayfs where these are given separate inodes on the overlayfs layer. Overlayfs itself detects this condition and returns success without doing anything, but then vfs_rename() will proceed as if this was a successful rename (detach_mounts(), d_move()). The correct thing to do is to detect this condition before even calling into overlayfs. This patch does this by calling vfs_select_inode() to get the underlying inodes. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 54d5ca87 upstream. Signed-off-by:
-
Alexander Shishkin authored
commit 9f448cd3 upstream. When the PMU driver reports a truncated AUX record, it effectively means that there is no more usable room in the event's AUX buffer (even though there may still be some room, so that perf_aux_output_begin() doesn't take action). At this point the consumer still has to be woken up and the event has to be disabled, otherwise the event will just keep spinning between perf_aux_output_begin() and perf_aux_output_end() until its context gets unscheduled. Again, for cpu-wide events this means never, so once in this condition, they will be forever losing data. Fix this by disabling the event and waking up the consumer in case of a truncated AUX record. Reported-by:
Markus Metzger <markus.t.metzger@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1462886313-13660-3-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Namhyung Kim authored
commit e9d848cb upstream. The commit b97511c5 ("perf tools: Add overhead/overhead_children keys defaults via string") moved initialization of column headers but it missed to check the sort__mode. As 'perf diff' doesn't call perf_hpp__init(), the setup_overhead() also should not be called. Before: # Baseline Delta Children Overhead Shared Object Symbol # ........ ....... ........ ........ ................... ....................... # 28.48% -28.47% 28.48% 28.48% [kernel.vmlinux ] [k] intel_idle 11.51% -11.47% 11.51% 11.51% libxul.so [.] 0x0000000001a360f7 3.49% -3.49% 3.49% 3.49% [kernel.vmlinux] [k] generic_exec_single 2.91% -2.89% 2.91% 2.91% libdbus-1.so.3.8.11 [.] 0x000000000000cdc2 2.86% -2.85% 2.86% 2.86% libxcb.so.1.1.0 [.] 0x000000000000c890 2.44% -2.39% 2.44% 2.44% [kernel.vmlinux] [k] perf_event_aux_ctx After: # Baseline Delta Shared Object Symbol # ........ ....... ................... ....................... # 28.48% -28.47% [kernel.vmlinux] [k] intel_idle 11.51% -11.47% libxul.so [.] 0x0000000001a360f7 3.49% -3.49% [kernel.vmlinux] [k] generic_exec_single 2.91% -2.89% libdbus-1.so.3.8.11 [.] 0x000000000000cdc2 2.86% -2.85% libxcb.so.1.1.0 [.] 0x000000000000c890 2.44% -2.39% [kernel.vmlinux] [k] perf_event_aux_ctx Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b97511c5 ("perf tools: Add overhead/overhead_children keys defaults via string") Link: http://lkml.kernel.org/r/1462890384-12486-2-git-send-email-acme@kernel.orgSigned-off-by:
-
Jack Pham authored
commit dec8e8f6 upstream. Specifically for the case of reads that use the Extended Register Read Long command, a multi-byte read operation is broken up into 8-byte chunks. However the call to spmi_ext_register_readl() is incorrectly passing 'val_size', which if greater than 8 will always fail. The argument should instead be 'len'. Fixes: c9afbb05 ("regmap: spmi: support base and extended register spaces") Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Ludovic Desroches authored
commit 5305a7b7 upstream. The default configuration of a pin is often with a value in the pull-up/down field at chip reset. So, even if the internal logic of the controller prevents writing a configuration with pull-up and pull-down at the same time, we must ensure explicitly this condition before writing the register. This was leading to a pull-down condition not taken into account for instance. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 77618084 ("pinctrl: introduce driver for Atmel PIO4 controller") Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ben Hutchings authored
commit 1ff7760f upstream. We clamp frame_len_words to a maximum of 4096, but do not actually limit the number of words written or read through the DATA registers or the length added to spi_message::actual_length. This results in silent data corruption for commands longer than this maximum. Recalculate the length of each transfer, taking frame_len_words into account. Use this length in qspi_{read,write}_msg(), and to increment spi_message::actual_length. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Ben Hutchings authored
commit ea1b60fb upstream. Each transfer can specify 8, 16 or 32 bits per word independently of the default for the device being addressed. However, currently we calculate the number of words in the frame assuming that the word size is the device default. If multiple transfers in the same message have differing bits_per_word, we bitwise-or the different values in the WLEN register field. Fix both of these. Also rename 'frame_length' to 'frame_len_words' to make clear that it's not a byte count like spi_message::frame_length. Signed-off-by:
-
Jarkko Nikula authored
commit 66ec246e upstream. Certain Intel Sunrisepoint PCH variants report zero chip selects in SPI capabilities register even they have one per port. Detection in pxa2xx_spi_probe() sets master->num_chipselect to 0 leading to -EINVAL from spi_register_master() where chip select count is validated. Fix this by not using SPI capabilities register on Sunrisepoint. They don't have more than one chip select so use the default value 1 instead of detection. Fixes: 8b136baa ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals") Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
commit addacd80 upstream. The HD-audio reconfig function got broken in the recent kernels, typically resulting in a failure like: snd_hda_intel 0000:00:1b.0: control 3:0:0:Playback Channel Map:0 is already present This is because of the code restructuring to move the PCM and control instantiation into the codec drive probe, by the commit [bcd96557: ALSA: hda - Build PCMs and controls at codec driver probe]. Although the commit above removed the calls of snd_hda_codec_build_pcms() and *_build_controls() at the controller driver probe, the similar calls in the reconfig were still left forgotten. This caused the conflicting and duplicated PCMs and controls. The fix is trivial: just remove these superfluous calls from reconfig_codec(). Fixes: bcd96557 ('ALSA: hda - Build PCMs and controls at codec driver probe') Reported-by:
Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kaho Ng authored
commit 2da2dc9e upstream. For reducing the noise from the headset output on ASUS UX501VW, call the existing fixup, alc_fixup_headset_mode_alc668(), additionally. Thread: https://bbs.archlinux.org/viewtopic.php?id=209554Signed-off-by:
Kaho Ng <ngkaho1234@gmail.com> Signed-off-by:
-
Yura Pakhuchiy authored
commit 3231e205 upstream. Subwoofer does not work out of the box on ASUS N751/N551 laptops. This patch fixes it. Patch tested on N751 laptop. N551 part is not tested, but according to [1] and [2] this laptop requires similar changes, so I included them in the patch. 1. https://github.com/honsiorovskyi/asus-n551-hda-fix 2. https://bugs.launchpad.net/ubuntu/+source/alsa-tools/+bug/1405691 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117781Signed-off-by:
Yura Pakhuchiy <pakhuchiy@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 84add303 upstream. Phoenix Audio has yet another device with another id (even a different vendor id, 0556:0014) that requires the same quirk for the sample rate. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221Signed-off-by:
-
Takashi Iwai authored
commit 2d2c038a upstream. Phoenix Audio MT202pcs (1de7:0114) and MT202exe (1de7:0013) need the same workaround as TMX320 for avoiding the firmware bug. It fixes the frequent error about the sample rate inquiries and the slow device probe as consequence. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117321Signed-off-by:
-
Herbert Xu authored
commit df27b26f upstream. As akcipher uses an SG interface, you must not use vmalloc memory as input for it. This patch fixes testmgr to copy the vmalloc test vectors to kmalloc memory before running the test. This patch also removes a superfluous sg_virt call in do_test_rsa. Reported-by:
Anatoly Pugachev <matorola@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
commit 13f4bb78 upstream. The crypto hash walk code is broken when supplied with an offset greater than or equal to PAGE_SIZE. This patch fixes it by adjusting walk->pg and walk->offset when this happens. Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Tadeusz Struk authored
commit 6dc5df71 upstream. Fix undefined reference issue reported by kbuild test robot. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Tadeusz Struk authored
commit 9e209fcf upstream. The pf2vf_resp_wq is a global so it has to be created at init and destroyed at exit, instead of per device. Tested-by:
Suresh Marikkannu <sureshx.marikkannu@intel.com> Signed-off-by:
-
Andrea Arcangeli authored
commit 6d0a07ed upstream. This will provide fully accuracy to the mapcount calculation in the write protect faults, so page pinning will not get broken by false positive copy-on-writes. total_mapcount() isn't the right calculation needed in reuse_swap_page(), so this introduces a page_trans_huge_mapcount() that is effectively the full accurate return value for page_mapcount() if dealing with Transparent Hugepages, however we only use the page_trans_huge_mapcount() during COW faults where it strictly needed, due to its higher runtime cost. This also provide at practical zero cost the total_mapcount information which is needed to know if we can still relocate the page anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we can reuse the page no matter if it's a pte or a pmd_trans_huge triggering the fault, but we can only relocate the page anon_vma to the local vma->anon_vma if we're sure it's only this "vma" mapping the whole THP physical range. Kirill A. Shutemov discovered the problem with moving the page anon_vma to the local vma->anon_vma in a previous version of this patch and another problem in the way page_move_anon_rmap() was called. Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a previous version, because reuse_swap_page must be a macro to call page_trans_huge_mapcount from swap.h, so this uses a macro again instead of an inline function. With this change at least it's a less dangerous usage than it was before, because "page" is used only once now, while with the previous code reuse_swap_page(page++) would have called page_mapcount on page+1 and it would have increased page twice instead of just once. Dean Luick noticed an uninitialized variable that could result in a rmap inefficiency for the non-THP case in a previous version. Mike Marciniszyn said: : Our RDMA tests are seeing an issue with memory locking that bisects to : commit 61f5d698 ("mm: re-enable THP") : : The test program registers two rather large MRs (512M) and RDMA : writes data to a passive peer using the first and RDMA reads it back : into the second MR and compares that data. The sizes are chosen randomly : between 0 and 1024 bytes. : : The test will get through a few (<= 4 iterations) and then gets a : compare error. : : Tracing indicates the kernel logical addresses associated with the individual : pages at registration ARE correct , the data in the "RDMA read response only" : packets ARE correct. : : The "corruption" occurs when the packet crosse two pages that are not physically : contiguous. The second page reads back as zero in the program. : : It looks like the user VA at the point of the compare error no longer points to : the same physical address as was registered. : : This patch totally resolves the issue! Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
"Kirill A. Shutemov" <kirill@shutemov.name> Reviewed-by:
Dean Luick <dean.luick@intel.com> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Tested-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by:
Josh Collier <josh.d.collier@intel.com> Cc: Marc Haber <mh+linux-kernel@zugschlus.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sergey Senozhatsky authored
commit 44f43e99 upstream. zs_can_compact() has two race conditions in its core calculation: unsigned long obj_wasted = zs_stat_get(class, OBJ_ALLOCATED) - zs_stat_get(class, OBJ_USED); 1) classes are not locked, so the numbers of allocated and used objects can change by the concurrent ops happening on other CPUs 2) shrinker invokes it from preemptible context Depending on the circumstances, thus, OBJ_ALLOCATED can become less than OBJ_USED, which can result in either very high or negative `total_scan' value calculated later in do_shrink_slab(). do_shrink_slab() has some logic to prevent those cases: vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-64 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62 vmscan: shrink_slab: zs_shrinker_scan+0x0/0x28 [zsmalloc] negative objects to delete nr=-62 However, due to the way `total_scan' is calculated, not every shrinker->count_objects() overflow can be spotted and handled. To demonstrate the latter, I added some debugging code to do_shrink_slab() (x86_64) and the results were: vmscan: OVERFLOW: shrinker->count_objects() == -1 [18446744073709551615] vmscan: but total_scan > 0: 92679974445502 vmscan: resulting total_scan: 92679974445502 [..] vmscan: OVERFLOW: shrinker->count_objects() == -1 [18446744073709551615] vmscan: but total_scan > 0: 22634041808232578 vmscan: resulting total_scan: 22634041808232578 Even though shrinker->count_objects() has returned an overflowed value, the resulting `total_scan' is positive, and, what is more worrisome, it is insanely huge. This value is getting used later on in shrinker->scan_objects() loop: while (total_scan >= batch_size || total_scan >= freeable) { unsigned long ret; unsigned long nr_to_scan = min(batch_size, total_scan); shrinkctl->nr_to_scan = nr_to_scan; ret = shrinker->scan_objects(shrinker, shrinkctl); if (ret == SHRINK_STOP) break; freed += ret; count_vm_events(SLABS_SCANNED, nr_to_scan); total_scan -= nr_to_scan; cond_resched(); } `total_scan >= batch_size' is true for a very-very long time and 'total_scan >= freeable' is also true for quite some time, because `freeable < 0' and `total_scan' is large enough, for example, 22634041808232578. The only break condition, in the given scheme of things, is shrinker->scan_objects() == SHRINK_STOP test, which is a bit too weak to rely on, especially in heavy zsmalloc-usage scenarios. To fix the issue, take a pool stat snapshot and use it instead of racy zs_stat_get() calls. Link: http://lkml.kernel.org/r/20160509140052.3389-1-sergey.senozhatsky@gmail.comSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Junxiao Bi authored
commit c25a1e06 upstream. Commit 702e5bc6 ("ocfs2: use generic posix ACL infrastructure") refactored code to use posix_acl_create. The problem with this function is that it is not mindful of the cluster wide inode lock making it unsuitable for use with ocfs2 inode creation with ACLs. For example, when used in ocfs2_mknod, this function can cause deadlock as follows. The parent dir inode lock is taken when calling posix_acl_create -> get_acl -> ocfs2_iop_get_acl which takes the inode lock again. This can cause deadlock if there is a blocked remote lock request waiting for the lock to be downconverted. And same deadlock happened in ocfs2_reflink. This fix is to revert back using ocfs2_init_acl. Fixes: 702e5bc6 ("ocfs2: use generic posix ACL infrastructure") Signed-off-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Junxiao Bi authored
commit 5ee0fbd5 upstream. Commit 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") introduced this issue. ocfs2_setattr called by chmod command holds cluster wide inode lock when calling posix_acl_chmod. This latter function in turn calls ocfs2_iop_get_acl and ocfs2_iop_set_acl. These two are also called directly from vfs layer for getfacl/setfacl commands and therefore acquire the cluster wide inode lock. If a remote conversion request comes after the first inode lock in ocfs2_setattr, OCFS2_LOCK_BLOCKED will be set. And this will cause the second call to inode lock from the ocfs2_iop_get_acl() to block indefinetly. The deleted version of ocfs2_acl_chmod() calls __posix_acl_chmod() which does not call back into the filesystem. Therefore, we restore ocfs2_acl_chmod(), modify it slightly for locking as needed, and use that instead. Fixes: 743b5f14 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 626abd59 ] Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 10a81980 ] In the very unlikely case __tcp_retransmit_skb() can not use the cloning done in tcp_transmit_skb(), we need to refresh skb_mstamp before doing the copy and transmit, otherwise TCP TS val will be an exact copy of original transmit. Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
xypron.glpk@gmx.de authored
[ Upstream commit 161de2ca ] Reserved fields should be set to zero to avoid exposing bits from the kernel stack. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 79e48650 ] Stack object "dte_facilities" is allocated in x25_rx_call_request(), which is supposed to be initialized in x25_negotiate_facilities. However, 5 fields (8 bytes in total) are not initialized. This object is then copied to userland via copy_to_user, thus infoleak occurs. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
-
Mikko Rapeli authored
[ Upstream commit 4a91cb61 ] glibc's net/if.h contains copies of definitions from linux/if.h and these conflict and cause build failures if both files are included by application source code. Changes in uapi headers, which fixed header file dependencies to include linux/if.h when it was needed, e.g. commit 1ffad83d, made the net/if.h and linux/if.h incompatibilities visible as build failures for userspace applications like iproute2 and xtables-addons. This patch fixes compile errors when glibc net/if.h is included before linux/if.h: ./linux/if.h:99:21: error: redeclaration of enumerator ‘IFF_NOARP’ ./linux/if.h:98:23: error: redeclaration of enumerator ‘IFF_RUNNING’ ./linux/if.h:97:26: error: redeclaration of enumerator ‘IFF_NOTRAILERS’ ./linux/if.h:96:27: error: redeclaration of enumerator ‘IFF_POINTOPOINT’ ./linux/if.h:95:24: error: redeclaration of enumerator ‘IFF_LOOPBACK’ ./linux/if.h:94:21: error: redeclaration of enumerator ‘IFF_DEBUG’ ./linux/if.h:93:25: error: redeclaration of enumerator ‘IFF_BROADCAST’ ./linux/if.h:92:19: error: redeclaration of enumerator ‘IFF_UP’ ./linux/if.h:252:8: error: redefinition of ‘struct ifconf’ ./linux/if.h:203:8: error: redefinition of ‘struct ifreq’ ./linux/if.h:169:8: error: redefinition of ‘struct ifmap’ ./linux/if.h:107:23: error: redeclaration of enumerator ‘IFF_DYNAMIC’ ./linux/if.h:106:25: error: redeclaration of enumerator ‘IFF_AUTOMEDIA’ ./linux/if.h:105:23: error: redeclaration of enumerator ‘IFF_PORTSEL’ ./linux/if.h:104:25: error: redeclaration of enumerator ‘IFF_MULTICAST’ ./linux/if.h:103:21: error: redeclaration of enumerator ‘IFF_SLAVE’ ./linux/if.h:102:22: error: redeclaration of enumerator ‘IFF_MASTER’ ./linux/if.h:101:24: error: redeclaration of enumerator ‘IFF_ALLMULTI’ ./linux/if.h:100:23: error: redeclaration of enumerator ‘IFF_PROMISC’ The cases where linux/if.h is included before net/if.h need a similar fix in the glibc side, or the order of include files can be changed userspace code as a workaround. This change was tested in x86 userspace on Debian unstable with scripts/headers_compile_test.sh: $ make headers_install && \ cd usr/include && ../../scripts/headers_compile_test.sh -l -k ... cc -Wall -c -nostdinc -I /usr/lib/gcc/i586-linux-gnu/5/include -I /usr/lib/gcc/i586-linux-gnu/5/include-fixed -I . -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH/i586-linux-gnu -o /dev/null ./linux/if.h_libc_before_kernel.h PASSED libc before kernel test: ./linux/if.h Reported-by:
Jan Engelhardt <jengelh@inai.de> Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Reported-by:
Stephen Hemminger <shemming@brocade.com> Reported-by:
Waldemar Brodkorb <mail@waldemar-brodkorb.de> Cc: Gabriel Laskar <gabriel@lse.epita.fr> Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 856ce5d0 ] With the newly introduced helper functions the skb pulling is hidden in the checksumming function - and undone before returning to the caller. The IGMP and MLD query parsing functions in the bridge still assumed that the skb is pointing to the beginning of the IGMP/MLD message while it is now kept at the beginning of the IPv4/6 header. If there is a querier somewhere else, then this either causes the multicast snooping to stay disabled even though it could be enabled. Or, if we have the querier enabled too, then this can create unnecessary IGMP / MLD query messages on the link. Fixing this by taking the offset between IP and IGMP/MLD header into account, too. Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code") Reported-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 31ca0458 ] get_bridge_ifindices() is used from the old "deviceless" bridge ioctl calls which aren't called with rtnl held. The comment above says that it is called with rtnl but that is not really the case. Here's a sample output from a test ASSERT_RTNL() which I put in get_bridge_ifindices and executed "brctl show": [ 957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30) [ 957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G W O 4.6.0-rc4+ #157 [ 957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 957.423009] 0000000000000000 ffff880058adfdf0 ffffffff8138dec5 0000000000000400 [ 957.423009] ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32 0000000000000001 [ 957.423009] 00007ffec1a444b0 0000000000000400 ffff880053c19130 0000000000008940 [ 957.423009] Call Trace: [ 957.423009] [<ffffffff8138dec5>] dump_stack+0x85/0xc0 [ 957.423009] [<ffffffffa05ead32>] br_ioctl_deviceless_stub+0x212/0x2e0 [bridge] [ 957.423009] [<ffffffff81515beb>] sock_ioctl+0x22b/0x290 [ 957.423009] [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700 [ 957.423009] [<ffffffff8126c159>] SyS_ioctl+0x79/0x90 [ 957.423009] [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1 Since it only reads bridge ifindices, we can use rcu to safely walk the net device list. Also remove the wrong rtnl comment above. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ian Campbell authored
[ Upstream commit dedc58e0 ] The peer may be expecting a reply having sent a request and then done a shutdown(SHUT_WR), so tearing down the whole socket at this point seems wrong and breaks for me with a client which does a SHUT_WR. Looking at other socket family's stream_recvmsg callbacks doing a shutdown here does not seem to be the norm and removing it does not seem to have had any adverse effects that I can see. I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact on the vmci transport. Signed-off-by:
Ian Campbell <ian.campbell@docker.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Daniel Jurgens authored
[ Upstream commit 82d69203 ] Use htons instead of unconditionally byte swapping nexthdr. On a little endian systems shifting the byte is correct behavior, but it results in incorrect csums on big endian architectures. Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Carol Soto <clsoto@us.ibm.com> Tested-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 5f8e4474 ] The stack object “map” has a total size of 32 bytes. Its last 4 bytes are padding generated by compiler. These padding bytes are not initialized and sent out via “nla_put”. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit b8670c09 ] The stack object “info” has a total size of 12 bytes. Its last byte is padding which is not initialized and leaked via “put_cmsg”. Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit 1c021bb7 ] In the receive path a queue's work bit was cleared unconditionally even if fec_enet_rx_queue only read out a part of the available packets from the hardware. This resulted in not reading any packets in the next napi turn and so packets were delayed or lost. The obvious fix is to only clear a queue's bit when the queue was emptied. Fixes: 4d494cdc ("net: fec: change data structure to support multiqueue") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Fugang Duan <fugang.duan@nxp.com> Acked-by:
-
Nicolas Dichtel authored
[ Upstream commit 79e8dc8b ] The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR. Fixes: 65d7ab8d ("net: Identifier Locator Addressing module") CC: Tom Herbert <tom@herbertland.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 6071bd1a ] This was recently reported to me, and reproduced on the latest net kernel, when attempting to run netperf from a host that had a netem qdisc attached to the egress interface: [ 788.073771] ---------------------[ cut here ]--------------------------- [ 788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda() [ 788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962 data_len=0 gso_size=1448 gso_type=1 ip_summed=3 [ 788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log dm_mod [ 788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W ------------ 3.10.0-327.el7.x86_64 #1 [ 788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012 [ 788.542260] ffff880437c036b8 f7afc56532a53db9 ffff880437c03670 ffffffff816351f1 [ 788.576332] ffff880437c036a8 ffffffff8107b200 ffff880633e74200 ffff880231674000 [ 788.611943] 0000000000000001 0000000000000003 0000000000000000 ffff880437c03710 [ 788.647241] Call Trace: [ 788.658817] <IRQ> [<ffffffff816351f1>] dump_stack+0x19/0x1b [ 788.686193] [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0 [ 788.713803] [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80 [ 788.741314] [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100 [ 788.767018] [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda [ 788.796117] [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190 [ 788.823392] [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem] [ 788.854487] [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570 [ 788.880870] [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0 ... The problem occurs because netem is not prepared to handle GSO packets (as it uses skb_checksum_help in its enqueue path, which cannot manipulate these frames). The solution I think is to simply segment the skb in a simmilar fashion to the way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes. When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt the first segment, and enqueue the remaining ones. tested successfully by myself on the latest net kernel, to which this applies Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: "David S. Miller" <davem@davemloft.net> CC: netem@lists.linux-foundation.org CC: eric.dumazet@gmail.com CC: stephen@networkplumber.org Acked-by:
-
WANG Cong authored
[ Upstream commit bdf17661 ] Similarly, we need to update backlog too when we update qlen. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
