- 06 Jan, 2016 3 commits
-
-
Geert Uytterhoeven authored
As of commit e488ca9f ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
As of commit e488ca9f ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by:
-
Geert Uytterhoeven authored
As of commit e488ca9f ("doc: dt: mtd: partitions: add compatible property to "partitions" node"), the "partitions" subnode of an SPI FLASH device node must have a compatible property. The partitions are no longer detected if it is not present. Signed-off-by:
-
- 17 Dec, 2015 1 commit
-
-
Simon Horman authored
Use recently SoC-specific compatibility strings in r8a779[01] device trees. Signed-off-by:
-
- 15 Dec, 2015 7 commits
-
-
Magnus Damm authored
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Signed-off-by:
-
Magnus Damm authored
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by:
-
Magnus Damm authored
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by:
-
Magnus Damm authored
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
-
- 11 Dec, 2015 1 commit
-
-
Simon Horman authored
Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes. Based on similar work for the r8a7791 by Geert Uytterhoeven. Signed-off-by:
-
- 10 Dec, 2015 9 commits
-
-
Simon Horman authored
Instantiate all serial devices in r8a7793 device tree and set them as disabled by default. Based on similar work for the r8a7791 by Laurent Pinchart. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Drop the "console=" parameter from the kernel command line, as it's no longer needed for DT-based platforms. Add serial port config to chosen/stdout-path. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
- 08 Dec, 2015 2 commits
-
-
Kuninori Morimoto authored
Renesas sound driver needs #sound-dai-cells settings, but, this usage is a little bit confusable. It came from ALSA SoC historical reasons. The sound DAI naming method is different between Single/Multi DAI in the ALSA framework, and it is used for sound card matching. And this #sound-dai-cells has relationship to it. Current SoC dtsi has #sound-dai-cells = <1> as default settings (= it is assuming that board/platform has multi DAI), and board/platform side needs to overwrite it if board/platform was single DAI. This style is more confusable for users. This patch removes SoC side default settings, and force to set it by board/platform side. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Geert Uytterhoeven authored
The default value of #sound-dai-cells in r8a7778.dtsi is one, while the /sound/simple-audio-card,cpu device node in r8a7778-bockw.dts uses a phandle without any extra cells ("<&rcar_sound>"), causing: /sound/simple-audio-card,cpu: arguments longer than property asoc-simple-card sound: parse error -22 asoc-simple-card: probe of sound failed with error -22 Override #sound-dai-cells to zero to fix this. Signed-off-by:
-
- 07 Dec, 2015 3 commits
-
-
Simon Horman authored
Commit a1bc260b ("gpio: clean up gpio-ranges documentation") declares the above property deprecated. That was more than 2 years ago. Remove it, so it doesn't get copied around needlessly. Based on similar work for the r8a7791 and r8a7794 by Wolfram Sang. Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Sergei Shtylyov authored
Define the generic R8A7791 part of the EtherAVB device node. Based on the commit f25d6b97 ("ARM: shmobile: r8a7790: add EtherAVB DT support"). Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
Add the EtherAVB clock to the R8A7791 device tree. Based on the commit 63d2d750 ("ARM: shmobile: r8a7790: add EtherAVB clocks"). Signed-off-by:
-
- 01 Dec, 2015 2 commits
-
-
Geert Uytterhoeven authored
The sh73a0 has 4 MSIOF devices, located in the A3SP power area. Signed-off-by:
-
Geert Uytterhoeven authored
The 4 MSIOF clocks are MSTP clocks, and children of the SUB clock. Signed-off-by:
-
- 25 Nov, 2015 12 commits
-
-
Geert Uytterhoeven authored
Add the missing L2 cache-controller node, and link the CPU nodes to it. This will allow migration to the generic l2c OF initialization. The L2 cache is an ARM L2C-310 (r3p1), of size 512 KiB (64 KiB x 8 ways). Signed-off-by:
-
Geert Uytterhoeven authored
Add the missing L2 cache-controller node, and link the CPU node to it. This will allow migration to the generic l2c OF initialization. The L2 cache is an ARM L2C-310 (r3p1-150rel0), of size 256 KiB (32 KiB x 8 ways). Signed-off-by:
-
Simon Horman authored
22b16071 ("ARM: shmobile: alt: Add pfc pins to DT") introduced pfc pins to the alt device tree but did not reference them. This patch fixes ether pfc by: * Referencing ether pins * Adding and referencing phy1 pins * Removing ether b pins. These are not used in the configuration of the alt board used for testing and empirically their presence prevents ethernet from functioning correctly in that environment. Reported-by:
-
Simon Horman authored
22b16071 ("ARM: shmobile: alt: Add pfc pins to DT") introduced pfc pins to the alt device tree but did not reference them. This patch fixes scif2 pfc by adding references to the scif2 pins. Reported-by:
-
Geert Uytterhoeven authored
As of commits 5cfdedb7 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9 ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partitions to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by:
-
Geert Uytterhoeven authored
As of commits 5cfdedb7 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9 ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partitions to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by:
-
Geert Uytterhoeven authored
As of commits 5cfdedb7 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9 ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partitions to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by:
-
Geert Uytterhoeven authored
As of commits 5cfdedb7 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9 ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged. Hence move the SPI FLASH partition to a "partitions" subnode. Based on similar work for the koelsch board by Geert Uytterhoeven. Signed-off-by:
-
Laurent Pinchart authored
The signals output by the DU to the HDMI transmitter use full 24-bit RGB. Make sure all pins are properly muxed. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Wolfram Sang authored
Commit a1bc260b ("gpio: clean up gpio-ranges documentation") declares the above property deprecated. That was more than 2 years ago. Remove it, so it doesn't get copied around needlessly. Signed-off-by:
-
Wolfram Sang authored
Commit a1bc260b ("gpio: clean up gpio-ranges documentation") declares the above property deprecated. That was more than 2 years ago. Remove it, so it doesn't get copied around needlessly. Signed-off-by:
-
Laurent Pinchart authored
Add the DU device with a disabled state. Boards that want to enable the DU need to specify the output topology. Signed-off-by:
-
