This reverts commit 78ca1108.

It is causing boot failures with qemu mac99 in at least some
configurations.

This patch moves the files related to page table dump in a
dedicated subdirectory.

The purpose is to clean a bit arch/powerpc/mm by regrouping
multiple files handling a dedicated function.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Shorten the file names while we're at it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When using KASAN, there are parts of the shadow area where all
pages are mapped to the kasan_early_shadow_page. It is pointless
to dump one line for each of those pages (in the example below there
are 7168 entries pointing to the same physical page).

~# cat /sys/kernel/debug/kernel_page_tables
 ...
---[ kasan shadow mem start ]---
0xf7c00000-0xf8bfffff 0x06fac000       16M        rw       present           dirty  accessed
0xf8c00000-0xf8c03fff 0x00cd0000       16K        r        present           dirty  accessed
0xf8c04000-0xf8c07fff 0x00cd0000       16K        r        present           dirty  accessed
0xf8c08000-0xf8c0bfff 0x00cd0000       16K        r        present           dirty  accessed
0xf8c0c000-0xf8c0ffff 0x00cd0000       16K        r        present           dirty  accessed
0xf8c10000-0xf8c13fff 0x00cd0000       16K        r        present           dirty  accessed
 ... 7168 identical lines
0xffbfc000-0xffbfffff 0x00cd0000       16K        r        present           dirty  accessed
---[ kasan shadow mem end ]---
 ...

This patch modifies linux table dump to dump as a single line areas
where all addresses points to the same physical page. That physical
address is put inside [] to show that all virt pages points to the
same phys page.

~# cat /sys/kernel/debug/kernel_page_tables
 ...
---[ kasan shadow mem start ]---
0xf7c00000-0xf8bfffff  0x06fac000        16M        rw       present           dirty  accessed
0xf8c00000-0xffbfffff [0x00cd0000]       16K        r        present           dirty  accessed
---[ kasan shadow mem end ]---
 ...
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

map_hugetlb maps 256Mbytes of memory with default hugepage size.

This patch allows the user to pass the size and page shift as an
argument in order to use different size and page size.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

40x/booke have another path to reach 3f from transfer_to_handler,
make sure it also calls ACCOUNT_CPU_USER_ENTRY() when
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is selected.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

For pages without _PAGE_USER, PP field is 00
For pages with _PAGE_USER, PP field is 10 for RW and 11 for RO.

This patch sets _PAGE_USER to 0x002 and _PAGE_RW to 0x001
is order to simplify TLB handling by reducing amount of shifts.

The location of _PAGE_PRESENT and _PAGE_HASHPTE doesn't matter
as they are only SW related flags.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

PAGE_ACCESSED is only needed for CONFIG_SWAP. When CONFIG_SWAP
is not set, just ignore it. If CONFIG_SWAP is set and PAGE_ACCESSED
is not, let's take a minor fault.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

PP bits take user access into account, so no need to check _PAGE_USER
here. A DSI or ISI will be generated if needed.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

PAGE_DIRTY corresponds to the C bit. If writing on
a page for which the C bit is not set, a DataStoreTLBMiss
is generated. No need to check it in DataLoadTLBMiss.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

_PAGE_RW and _PAGE_DIRTY do not matter for ITLB misses.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

ITLB miss on kernel pages only occur with CONFIG_MODULES and
CONFIG_DEBUG_PAGEALLOC.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Since commit c62ce9ef ("powerpc: remove remaining bits from
CONFIG_APUS"), tophys() has become a pure constant operation.
PAGE_OFFSET is known at compile time so the physical address
can be builtin directly.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Since commit c62ce9ef ("powerpc: remove remaining bits from
CONFIG_APUS"), tophys() has become a pure constant operation.
PAGE_OFFSET is known at compile time so the physical address
can be builtin directly.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use SPRN_SPRG2 to store the current thread PGDIR and
avoid reading thread_struct.pgdir at every TLB miss.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When calling RTAS, the stack pointer is stored in SPRN_SPRG2
in order to be able to restore it in case of machine check in RTAS.

As machine check is not a perfomance critical path, this patch
frees SPRN_SPRG2 by using a field in thread struct instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

There is no reason to re-read each time the pointer at
location 0xf0 as it is fixed and known.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The 83xx has 8 SPRG registers and uses at least SPRG4
for DTLB handling LRU.

Fixes: 2319f123 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Looks like book3s/32 doesn't set RI on machine check, so
checking RI before calling die() will always be fatal
allthought this is not an issue in most cases.

Fixes: b96672dd ("powerpc: Machine check interrupt is a non-maskable interrupt")
Fixes: daf00ae7 ("powerpc/traps: restore recoverability of machine_check interrupts")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

MSR[RI] has already been cleared a few lines above.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When no machine description matches, display it clearly
before looping forever.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When disassembling InstructionTLBError we get the following messy code:

c000138c:       7d 84 63 78     mr      r4,r12
c0001390:       75 25 58 00     andis.  r5,r9,22528
c0001394:       75 2a 40 00     andis.  r10,r9,16384
c0001398:       41 a2 00 08     beq     c00013a0 <itlbie>
c000139c:       7c 00 22 64     tlbie   r4,r0

c00013a0 <itlbie>:
c00013a0:       39 40 04 01     li      r10,1025
c00013a4:       91 4b 00 b0     stw     r10,176(r11)
c00013a8:       39 40 10 32     li      r10,4146
c00013ac:       48 00 cc 59     bl      c000e004 <transfer_to_handler>

For a cleaner code dump, this patch replaces itlbie and dtlbie
symbols by local symbols.

c000138c:       7d 84 63 78     mr      r4,r12
c0001390:       75 25 58 00     andis.  r5,r9,22528
c0001394:       75 2a 40 00     andis.  r10,r9,16384
c0001398:       41 a2 00 08     beq     c00013a0 <InstructionTLBError+0xa0>
c000139c:       7c 00 22 64     tlbie   r4,r0
c00013a0:       39 40 04 01     li      r10,1025
c00013a4:       91 4b 00 b0     stw     r10,176(r11)
c00013a8:       39 40 10 32     li      r10,4146
c00013ac:       48 00 cc 59     bl      c000e004 <transfer_to_handler>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

All callers of mftb() expect 'unsigned long', and the function itself
only returns lower part of the TB so it really is 'unsigned long'
not 'unsigned long long'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 24be85a2 ("powerpc/powernv: Clear PECE1 in LPCR via stop-api
only on Hotplug", 2017-07-21) added two calls to opal_slw_set_reg()
inside pnv_cpu_offline(), with the aim of changing the LPCR value in
the SLW image to disable wakeups from the decrementer while a CPU is
offline.  However, pnv_cpu_offline() gets called each time a secondary
CPU thread is woken up to participate in running a KVM guest, that is,
not just when a CPU is offlined.

Since opal_slw_set_reg() is a very slow operation (with observed
execution times around 20 milliseconds), this means that an offline
secondary CPU can often be busy doing the opal_slw_set_reg() call
when the primary CPU wants to grab all the secondary threads so that
it can run a KVM guest.  This leads to messages like "KVM: couldn't
grab CPU n" being printed and guest execution failing.

There is no need to reprogram the SLW image on every KVM guest entry
and exit.  So that we do it only when a CPU is really transitioning
between online and offline, this moves the calls to
pnv_program_cpu_hotplug_lpcr() into pnv_smp_cpu_kill_self().

Fixes: 24be85a2 ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In cpufeatures_process_feature(), if a provided CPU feature is unknown and
enable_unknown is false, we erroneously print that the feature is being
enabled and return true, even though no feature has been enabled, and
may also set feature bits based on the last entry in the match table.

Fix this so that we only set feature bits from the match table if we have
actually enabled a feature from that table, and when failing to enable an
unknown feature, always print the "not enabling" message and return false.

Coincidentally, some older gccs (<GCC 7), when invoked with
-fsanitize-coverage=trace-pc, cause a spurious uninitialised variable
warning in this function:

  arch/powerpc/kernel/dt_cpu_ftrs.c: In function ‘cpufeatures_process_feature’:
  arch/powerpc/kernel/dt_cpu_ftrs.c:686:7: warning: ‘m’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    if (m->cpu_ftr_bit_mask)

An upcoming patch will enable support for kcov, which requires this option.
This patch avoids the warning.

Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Reported-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ajd: add commit message]
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The xmon debugger IPI handler waits in the callback function while
xmon is still active. This means they don't complete the IPI, and the
initiator always times out waiting for them.

Things manage to work after the timeout because there is some fallback
logic to keep NMI IPI state sane in case of the timeout, but this is a
bit ugly.

This patch changes NMI IPI back to half-asynchronous (i.e., wait for
everyone to call in, do not wait for IPI function to complete), but
the complexity is avoided by going one step further and allowing new
IPIs to be issued before the IPI functions to all complete.

If synchronization against that is required, it is left up to the
caller, but current callers don't require that. In fact with the
timeout handling, callers must be able to cope with this already.

Fixes: 5b73151f ("powerpc: NMI IPI make NMI IPIs fully sychronous")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The NMI IPI timeout logic is broken, if __smp_send_nmi_ipi() times out
on the first condition, delay_us will be zero which will send it into
the second spin loop with no timeout so it will spin forever.

Fixes: 5b73151f ("powerpc: NMI IPI make NMI IPIs fully sychronous")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In commit 7820856a ("powerpc/mm/book3e/64: Remove unsupported
64Kpage size from 64bit booke") we dropped the 64K page size support
from the 64-bit nohash (Book3E) code.

But we didn't update the dependencies of the PPC_64K_PAGES option,
meaning a randconfig can still trigger this code and cause a build
breakage, eg:
  arch/powerpc/include/asm/nohash/64/pgtable.h:14:2: error: #error "Page size not supported"
  arch/powerpc/include/asm/nohash/mmu-book3e.h:275:2: error: #error Unsupported page size

So remove PPC_BOOK3E_64 from the dependencies. This also means we
don't need to worry about PPC_FSL_BOOK3E, because that was just trying
to prevent the PPC_BOOK3E_64=y && PPC_FSL_BOOK3E=y case.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We weren't using SYSCALL_DEFINE for sys_switch_endian(), which means
it wasn't able to be traced by CONFIG_FTRACE_SYSCALLS.

By using the macro we create the right metadata and the syscall is
visible. eg:

  # cd /sys/kernel/debug/tracing
  # echo 1 | tee events/syscalls/sys_*_switch_endian/enable
  # ~/switch_endian_test
  # cat trace
  ...
  switch_endian_t-3604  [009] ....   315.175164: sys_switch_endian()
  switch_endian_t-3604  [009] ....   315.175167: sys_switch_endian -> 0x5555aaaa5555aaaa
  switch_endian_t-3604  [009] ....   315.175169: sys_switch_endian()
  switch_endian_t-3604  [009] ....   315.175169: sys_switch_endian -> 0x5555aaaa5555aaaa

Fixes: 529d235a ("powerpc: Add a proper syscall for switching endianness")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

While the current kernel drivers/of/ code allows developers to be
sloppy and use a DTS status value of "ok", the current DTSpec 0.1
makes it clear that the proper spelling is "okay", so fix the small
number of PowerPC .dts files that do this.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When updating page tables, we need to make sure we fill the page table
entry valid bits. We do this by or'ing in one of PGD/PUD/PMD_VAL_BITS.

The page table 'set' interfaces allow updating the raw value of page
table entries without setting the valid bits, so remove those
interfaces to avoid incorrect usage in future.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Reword commit message based on mailing list discussion]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 8792468d "powerpc: Add the ability to save FPU without
giving it up" unexpectedly removed the MSR_FE0 and MSR_FE1 bits from
the bitmask used to update the MSR of the previous thread in
__giveup_fpu() causing a KVM-PR MacOS guest to lockup and panic the
host kernel.

Leaving FE0/1 enabled means unrelated processes might receive FPEs
when they're not expecting them and crash. In particular if this
happens to init the host will then panic.

eg (transcribed):
  qemu-system-ppc[837]: unhandled signal 8 at 12cc9ce4 nip 12cc9ce4 lr 12cc9ca4 code 0
  systemd[1]: unhandled signal 8 at 202f02e0 nip 202f02e0 lr 001003d4 code 0
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Reinstate these bits to the MSR bitmask to enable MacOS guests to run
under 32-bit KVM-PR once again without issue.

Fixes: 8792468d ("powerpc: Add the ability to save FPU without giving it up")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The Processor Utilzation of Resource Registers (PURR) provide an
estimate of resources used by a cpu thread. Section 7.6 in Book III of
the ISA outlines how to calculate the percentage of shared resources
for threads using the ratio of the PURR delta and Timebase Register
delta for a sampled period.

This calculation is currently done erroneously by the lparstat tool
from the powerpc-utils package. This patch exports the current
timebase value after we sample the PURRs and exposes it to userspace
accounting tools via /proc/ppc64/lparcfg.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The recent rework of PCI kconfig symbols exposed an existing bug in
the CURRITUCK kconfig logic.

It selects PPC4xx_PCI_EXPRESS which depends on PCI, but PCI is user
selectable and might be disabled, leading to a warning:

  WARNING: unmet direct dependencies detected for PPC4xx_PCI_EXPRESS
    Depends on [n]: PCI [=n] && 4xx [=y]
    Selected by [y]:
    - CURRITUCK [=y] && PPC_47x [=y]

Prior to commit eb01d42a ("PCI: consolidate PCI config entry in
drivers/pci") PCI was enabled by default for currituck_defconfig so we
didn't see the warning. The bad logic was still there, it just
required someone disabling PCI in their .config to hit it.

Fix it by forcing PCI on for CURRITUCK, which seems was always the
expectation anyway.

Fixes: eb01d42a ("PCI: consolidate PCI config entry in drivers/pci")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch adds a debugfs interface to force scheduling a recovery event.
This can be used to recover a specific PE or schedule a "special" recovery
even that checks for errors at the PHB level.
To force a recovery of a normal PE, use:

 echo '<#pe>:<#phb>' > /sys/kernel/debug/powerpc/eeh_force_recover

To force a scan for broken PHBs:

 echo 'hwcheck' > /sys/kernel/debug/powerpc/eeh_force_recover
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently when we detect an error we automatically invoke the EEH recovery
handler. This can be annoying when debugging EEH problems, or when working
on EEH itself so this patch adds a debugfs knob that will prevent a
recovery event from being queued up when an issue is detected.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add a helper to find the pci_controller structure based on the domain
number / phb id.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

To use this function at all #define DEBUG needs to be set in eeh_cache.c.
Considering that printing at pr_debug is probably not all that useful since
it adds the additional hurdle of requiring you to enable the debug print if
dynamic_debug is in use so this patch bumps it to pr_info.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Adds a debugfs file that can be read to view the contents of the EEH
address cache. This is pretty similar to the existing
eeh_addr_cache_print() function, but that function is intended to debug
issues inside of the kernel since it's #ifdef`ed out by default, and writes
into the kernel log.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The EEH address cache is used to map a physical MMIO address back to a PCI
device. It's useful to know when it's being manipulated, but currently this
requires recompiling with #define DEBUG set. This is pointless since we
have dynamic_debug nowdays, so remove the #ifdef guard and add a pr_debug()
for the remove case too.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>