- 05 Jul, 2021 2 commits
-
-
Yangbo Lu authored
Fix format string mismatch in ptp_sysfs.c. Use %u for unsigned int. Fixes: 73f37068 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Fix NULL pointer dereference in ptp_clock_register. The argument "parent" of ptp_clock_register may be NULL pointer. Fixes: 73f37068 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Jul, 2021 1 commit
-
-
Lorenzo Bianconi authored
Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment routine even if the fragment contains only the ethernet FCS. Fixes: 039fbc47 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Jul, 2021 13 commits
-
-
Paolo Abeni authored
If an UDP packet enters the GRO engine but is not eligible for aggregation and is not targeting an UDP tunnel, udp_gro_receive() will not set the flush bit, and packet could delayed till the next napi flush. Fix the issue ensuring non GROed packets traverse skb_gro_flush_final(). Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de> Fixes: 18f25dc3 ("udp: skip L4 aggregation for UDP tunnel packets") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ronak Doshi authored
Commit dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support") added support for encapsulation offload. However, the inner offload capability is to be restricted to UDP tunnels with default Vxlan and Geneve ports. This patch fixes the issue for tunnels with non-default ports using features check capability and filtering appropriate features for such tunnels. Fixes: dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Simon Horman says: ==================== small tc conntrack fixes Louis Peens says: The first patch makes sure that any callbacks registered to the ct->nf_tables table are cleaned up before freeing. The second patch removes what was effectively a workaround in the nfp driver because of the missing cleanup in patch 1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Louis Peens authored
The current location of the callback delete can lead to a race condition where deleting the callback requires a write_lock on the nf_table, but at the same time another thread from netfilter could have taken a read lock on the table before trying to offload. Since the driver is taking a rtnl_lock this can lead into a deadlock situation, where the netfilter offload will wait for the cls_flower rtnl_lock to be released, but this cannot happen since this is waiting for the nf_table read_lock to be released before it can delete the callback. Solve this by completely removing the nf_flow_table_offload_del_cb call, as this will now be cleaned up by act_ct itself when cleaning up the specific nf_table. Fixes: 62268e78 ("nfp: flower-ct: add nft callback stubs") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Louis Peens authored
When cleaning up the nf_table in tcf_ct_flow_table_cleanup_work there is no guarantee that the callback list, added to by nf_flow_table_offload_add_cb, is empty. This means that it is possible that the flow_block_cb memory allocated will be lost. Fix this by iterating the list and freeing the flow_block_cb entries before freeing the nf_table entry (via freeing ct_ft). Fixes: 978703f4 ("netfilter: flowtable: Add API for registering to flow table events") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wolfgang Bumiller authored
Since commit 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") bridges with `vlan_filtering 1` and only 1 auto-port don't set IFF_PROMISC for unicast-filtering-capable ports. Normally on port changes `br_manage_promisc` is called to update the promisc flags and unicast filters if necessary, but it cannot distinguish between *new* ports and ones losing their promisc flag, and new ports end up not receiving the MAC address list. Fix this by calling `br_fdb_sync_static` in `br_add_if` after the port promisc flags are updated and the unicast filter was supposed to have been filled. Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Some tests are failing, John bisected the issue to a recent commit. sock_set_timestamp() parameters should be : 1) sk 2) optname 3) valbool Fixes: 371087aa ("sock: expose so_timestamp options for mptcp") Signed-off-by: Eric Dumazet <edumazet@google.com> Bisected-by: John Sperbeck <jsperbeck@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Florian Westphal <fw@strlen.de> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
While tp->mtu_info is read while socket is owned, the write sides happen from err handlers (tcp_v[46]_mtu_reduced) which only own the socket spinlock. Fixes: 563d34d0 ("tcp: dont drop MTU reduction indications") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
wenxu authored
The confirm operation should be checked. If there are any failed, the packet should be dropped like in ovs and netfilter. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bailey Forrest authored
The prefetch is incorrectly using the dma address instead of the virtual address. It's supposed to be: prefetch((char *)buf_state->page_info.page_address + buf_state->page_info.page_offset) However, after correcting this mistake, there is no evidence of performance improvement. Fixes: 9b8dd5e5 ("gve: DQO: Add RX path") Signed-off-by: Bailey Forrest <bcf@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vadim Fedorenko authored
Commit 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced ip6_skb_dst_mtu with return value of signed int which is inconsistent with actually returned values. Also 2 users of this function actually assign its value to unsigned int variable and only __xfrm6_output assigns result of this function to signed variable but actually uses as unsigned in further comparisons and calls. Change this function to return unsigned int value. Fixes: 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent and less verbose 'dma_set_mask_and_coherent()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
I have checked that the IEEE standard 802.1Q-2018 section 8.6.9.4.5 is called AdminGateStates. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Jul, 2021 24 commits
-
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. Add a wrapping struct to serve as the memcpy() source so the compiler can perform appropriate bounds checking, avoiding this future warning: In function '__fortify_memcpy', inlined from 'iucv_message_pending' at net/iucv/iucv.c:1663:4: ./include/linux/fortify-string.h:246:4: error: call to '__read_overflow2_field' declared with attribute error: detected read beyond size of field (2nd parameter) Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
If 'gve_probe()' fails, we should propagate the error code, instead of hard coding a -ENXIO value. Make sure that all error handling paths set a correct value for 'err'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
If the 'register_netdev() call fails, we must release the resources allocated by the previous 'gve_init_priv()' call, as already done in the remove function. Add a new label and the missing 'gve_teardown_priv_resources()' in the error handling path. Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tDavid S. Miller authored
nguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-07-01 This series contains updates to igb, igc, ixgbe, e1000e, fm10k, and iavf drivers. Vinicius fixes a use-after-free issue present in igc and igb. Tom Rix fixes the return value for igc_read_phy_reg() when the operation is not supported for igc. Christophe Jaillet fixes unrolling of PCIe error reporting for ixgbe, igc, igb, fm10k, e10000e, and iavf. Alex ensures that q_vector array is not accessed beyond its bounds for igb. Jedrzej moves ring assignment to occur after bounds have been checked in igb. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohammad Athari Bin Ismail authored
Add stmmac_fpe_stop_wq() in stmmac_suspend() to terminate FPE workqueue during suspend. So, in suspend mode, there will be no FPE workqueue available. Without this fix, new additional FPE workqueue will be created in every suspend->resume cycle. Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Geert Uytterhoeven says: ==================== sms911x: DTS fixes and DT binding to json-schema conversion This patch series converts the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller Device Tree binding documentation to json-schema, after fixing a few issues in DTS files. Changed compared to v1[1]: - Dropped applied patches, - Add Reviewed-by, - Drop bogus double quotes in compatible values, - Add comment explaining why "additionalProperties: true" is needed. [1] [PATCH 0/5] sms911x: DTS fixes and DT binding to json-schema conversion https://lore.kernel.org/r/cover.1621518686.git.geert+renesas@glider.be ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Convert the Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller Device Tree binding documentation to json-schema. Document missing properties. Make "phy-mode" not required, as many DTS files do not have it, and the Linux drivers falls back to PHY_INTERFACE_MODE_NA. Correct nodename in example. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
make dtbs_check: ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$' ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+' There is no "smsc,irq-active-low" property, as active low is the default. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Accesses to unix_sk(sk)->gso_size are lockless. Add READ_ONCE()/WRITE_ONCE() around them. BUG: KCSAN: data-race in udp_lib_setsockopt / udpv6_sendmsg write to 0xffff88812d78f47c of 2 bytes by task 10849 on cpu 1: udp_lib_setsockopt+0x3b3/0x710 net/ipv4/udp.c:2696 udpv6_setsockopt+0x63/0x90 net/ipv6/udp.c:1630 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3265 __sys_setsockopt+0x18f/0x200 net/socket.c:2104 __do_sys_setsockopt net/socket.c:2115 [inline] __se_sys_setsockopt net/socket.c:2112 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88812d78f47c of 2 bytes by task 10852 on cpu 0: udpv6_sendmsg+0x161/0x16b0 net/ipv6/udp.c:1299 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2337 ___sys_sendmsg net/socket.c:2391 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2477 __do_sys_sendmmsg net/socket.c:2506 [inline] __se_sys_sendmmsg net/socket.c:2503 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2503 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x0005 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 10852 Comm: syz-executor.0 Not tainted 5.13.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The MPTCP receive path is hooked only into the TCP slow-path. The DSS presence allows plain MPTCP traffic to hit that consistently. Since commit e1ff9e82 ("net: mptcp: improve fallback to TCP"), when an MPTCP socket falls back to TCP, it can hit the TCP receive fast-path, and delay or stop triggering the event notification. Address the issue explicitly disabling the header prediction for MPTCP sockets. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/200 Fixes: e1ff9e82 ("net: mptcp: improve fallback to TCP") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
The caif_hsi driver relies on a cfhsi_get_ops symbol using symbol_get, but this symbol is not provided anywhere in the kernel tree. Remove this driver given that it is dead code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
kernel-doc for TIPC is too simple, we need to add more information for it. This patch is to extend the abstract, and add the Features and Links items. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sukadev Bhattiprolu authored
Normally, if a reset fails due to failover or other communication error there is another reset (eg: FAILOVER) in the queue and we would process that reset. But if we are unable to communicate with PHYP or VIOS after H_FREE_CRQ, there would be no other resets in the queue and the adapter would be in an undefined state even though it was in the OPEN state earlier. While starting the reset we set the carrier to off state so we won't even get the timeout resets. If the last queued reset fails, retry it as a hard reset (after the usual 60 second settling time). Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yangbo Lu says: ==================== ptp: support virtual clocks and timestamping Current PTP driver exposes one PTP device to user which binds network interface/interfaces to provide timestamping. Actually we have a way utilizing timecounter/cyclecounter to virtualize any number of PTP clocks based on a same free running physical clock for using. The purpose of having multiple PTP virtual clocks is for user space to directly/easily use them for multiple domains synchronization. user space: ^ ^ | SO_TIMESTAMPING new flag: | Packets with | SOF_TIMESTAMPING_BIND_PHC | TX/RX HW timestamps v v +--------------------------------------------+ sock: | sock (new member sk_bind_phc) | +--------------------------------------------+ ^ ^ | ethtool_get_phc_vclocks | Convert HW timestamps | | to sk_bind_phc v v +--------------+--------------+--------------+ vclock: | ptp1 | ptp2 | ptpN | +--------------+--------------+--------------+ pclock: | ptp0 free running | +--------------------------------------------+ The block diagram may explain how it works. Besides the PTP virtual clocks, the packet HW timestamp converting to the bound PHC is also done in sock driver. For user space, PTP virtual clocks can be created via sysfs, and extended SO_TIMESTAMPING API (new flag SOF_TIMESTAMPING_BIND_PHC) can be used to bind one PTP virtual clock for timestamping. The test tool timestamping.c (together with linuxptp phc_ctl tool) can be used to verify: # echo 4 > /sys/class/ptp/ptp0/n_vclocks [ 129.399472] ptp ptp0: new virtual clock ptp2 [ 129.404234] ptp ptp0: new virtual clock ptp3 [ 129.409532] ptp ptp0: new virtual clock ptp4 [ 129.413942] ptp ptp0: new virtual clock ptp5 [ 129.418257] ptp ptp0: guarantee physical clock free running # # phc_ctl /dev/ptp2 set 10000 # phc_ctl /dev/ptp3 set 20000 # # timestamping eno0 2 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC # timestamping eno0 2 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC # timestamping eno0 3 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC # timestamping eno0 3 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC Changes for v2: - Converted to num_vclocks for creating virtual clocks. - Guranteed physical clock free running when using virtual clocks. - Fixed build warning. - Updated copyright. Changes for v3: - Supported PTP virtual clock in default in PTP driver. - Protected concurrency of ptp->num_vclocks accessing. - Supported PHC vclocks query via ethtool. - Extended SO_TIMESTAMPING API for PHC binding. - Converted HW timestamps to PHC bound, instead of previous binding domain value to PHC idea. - Other minor fixes. Changes for v4: - Used do_aux_work callback for vclock refreshing instead. - Used unsigned int for vclocks number, and max_vclocks for limitiation. - Fixed mutex locking. - Dynamically allocated memory for vclock index storage. - Removed ethtool ioctl command for vclocks getting. - Updated doc for ethtool phc vclocks get. - Converted to mptcp_setsockopt_sol_socket_timestamping(). - Passed so_timestamping for sock_set_timestamping. - Fixed checkpatch/build. - Other minor fixed. Changes for v5: - Fixed checkpatch/build/bug reported by test robot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Add entry for PTP virtual clock driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Support binding PHC of PTP vclock for timestamping. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
This patch is to support hardware timestamp conversion to PHC bound. This applies to both RX and TX since their skb handling (for TX, it's skb clone in error queue) all goes through __sock_recv_timestamp. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Since PTP virtual clock support is added, there can be several PTP virtual clocks based on one PTP physical clock for timestamping. This patch is to extend SO_TIMESTAMPING API to support PHC (PTP Hardware Clock) binding by adding a new flag SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are in use, user space can configure to bind one for timestamping, but PTP physical clock is not supported and not needed to bind. This patch is preparation for timestamp conversion from raw timestamp to a specific PTP virtual clock time in core net. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Split timestamping handling into a new function mptcp_setsockopt_sol_socket_timestamping(). This is preparation for extending SO_TIMESTAMPING for PHC binding, since optval will no longer be integer. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Add kernel API ptp_convert_timestamp() to convert raw hardware timestamp to a specified ptp vclock time. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Add an interface for getting PHC (PTP Hardware Clock) virtual clocks, which are based on PHC physical clock providing hardware timestamp to network packets. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Add kernel API ptp_get_vclocks_index() to get all ptp vclocks index on pclock. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Track available ptp vclocks information. Record index values of available ptp vclocks during registering and unregistering. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
Support ptp physical/virtual clocks conversion via sysfs. There will be a new attribute n_vclocks under ptp physical clock sysfs. - In default, the value is 0 meaning only ptp physical clock is in use. - Setting the value can create corresponding number of ptp virtual clocks to use. But current physical clock is guaranteed to stay free running. - Setting the value back to 0 can delete virtual clocks and back use physical clock again. Another new attribute max_vclocks control the maximum number of ptp vclocks. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-