Replace the static list of struct_ops types with per-btf struct_ops_tab to
enable dynamic registration.

Both bpf_dummy_ops and bpf_tcp_ca now utilize the registration function
instead of being listed in bpf_struct_ops_types.h.

Cc: netdev@vger.kernel.org
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-12-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

A value_type should consist of three components: refcnt, state, and data.
refcnt and state has been move to struct bpf_struct_ops_common_value to
make it easier to check the value type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-11-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

To ensure that a module remains accessible whenever a struct_ops object of
a struct_ops type provided by the module is still in use.

struct bpf_struct_ops_map doesn't hold a refcnt to btf anymore since a
module will hold a refcnt to it's btf already. But, struct_ops programs are
different. They hold their associated btf, not the module since they need
only btf to assure their types (signatures).

However, verifier holds the refcnt of the associated module of a struct_ops
type temporarily when verify a struct_ops prog. Verifier needs the help
from the verifier operators (struct bpf_verifier_ops) provided by the owner
module to verify data access of a prog, provide information, and generate
code.

This patch also add a count of links (links_cnt) to bpf_struct_ops_map. It
avoids bpf_struct_ops_map_put_progs() from accessing btf after calling
module_put() in bpf_struct_ops_map_free().
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-10-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Pass the fd of a btf from the userspace to the bpf() syscall, and then
convert the fd into a btf. The btf is generated from the module that
defines the target BPF struct_ops type.

In order to inform the kernel about the module that defines the target
struct_ops type, the userspace program needs to provide a btf fd for the
respective module's btf. This btf contains essential information on the
types defined within the module, including the target struct_ops type.

A btf fd must be provided to the kernel for struct_ops maps and for the bpf
programs attached to those maps.

In the case of the bpf programs, the attach_btf_obj_fd parameter is passed
as part of the bpf_attr and is converted into a btf. This btf is then
stored in the prog->aux->attach_btf field. Here, it just let the verifier
access attach_btf directly.

In the case of struct_ops maps, a btf fd is passed as value_type_btf_obj_fd
of bpf_attr. The bpf_struct_ops_map_alloc() function converts the fd to a
btf and stores it as st_map->btf. A flag BPF_F_VTYPE_BTF_OBJ_FD is added
for map_flags to indicate that the value of value_type_btf_obj_fd is set.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-9-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

This is a preparation for searching for struct_ops types from a specified
module. BTF is always btf_vmlinux now. This patch passes a pointer of BTF
to bpf_struct_ops_find_value() and bpf_struct_ops_find(). Once the new
registration API of struct_ops types is used, other BTFs besides
btf_vmlinux can also be passed to them.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-8-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Include btf object id (btf_obj_id) in bpf_map_info so that tools (ex:
bpftools struct_ops dump) know the correct btf from the kernel to look up
type information of struct_ops types.

Since struct_ops types can be defined and registered in a module. The
type information of a struct_ops type are defined in the btf of the
module defining it.  The userspace tools need to know which btf is for
the module defining a struct_ops type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-7-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Once new struct_ops can be registered from modules, btf_vmlinux is no
longer the only btf that struct_ops_map would face.  st_map should remember
what btf it should use to get type information.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-6-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Maintain a registry of registered struct_ops types in the per-btf (module)
struct_ops_tab. This registry allows for easy lookup of struct_ops types
that are registered by a specific module.

It is a preparation work for supporting kernel module struct_ops in a
latter patch. Each struct_ops will be registered under its own kernel
module btf and will be stored in the newly added btf->struct_ops_tab. The
bpf verifier and bpf syscall (e.g. prog and map cmd) can find the
struct_ops and its btf type/size/id... information from
btf->struct_ops_tab.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-5-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Move some of members of bpf_struct_ops to bpf_struct_ops_desc.  type_id is
unavailabe in bpf_struct_ops anymore. Modules should get it from the btf
received by kmod's init function.

Cc: netdev@vger.kernel.org
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-4-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Get ready to remove bpf_struct_ops_init() in the future. By using
BTF_ID_LIST, it is possible to gather type information while building
instead of runtime.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-3-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Move the majority of the code to bpf_struct_ops_init_one(), which can then
be utilized for the initialization of newly registered dynamically
allocated struct_ops types in the following patches.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-2-thinker.li@gmail.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Jiri Olsa says:

====================
bpf: Add cookies retrieval for perf/kprobe multi links

hi,
this patchset adds support to retrieve cookies from existing tracing
links that still did not support it plus changes to bpftool to display
them. It's leftover we discussed some time ago [1].

thanks,
jirka

v2 changes:
 - added review/ack tags
 - fixed memory leak [Quentin]
 - align the uapi fields properly [Yafang Shao]

[1] https://lore.kernel.org/bpf/CALOAHbAZ6=A9j3VFCLoAC_WhgQKU7injMf06=cM2sU4Hi4Sx+Q@mail.gmail.com/Reviewed-by: Quentin Monnet <quentin@isovalent.com>
---
====================
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20240119110505.400573-1-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Displaying cookies for kprobe multi link, in plain mode:

  # bpftool link
  ...
  1397: kprobe_multi  prog 47532
          kretprobe.multi  func_cnt 3
          addr             cookie           func [module]
          ffffffff82b370c0 3                bpf_fentry_test1
          ffffffff82b39780 1                bpf_fentry_test2
          ffffffff82b397a0 2                bpf_fentry_test3

And in json mode:

  # bpftool link -j | jq
  ...
    {
      "id": 1397,
      "type": "kprobe_multi",
      "prog_id": 47532,
      "retprobe": true,
      "func_cnt": 3,
      "missed": 0,
      "funcs": [
        {
          "addr": 18446744071607382208,
          "func": "bpf_fentry_test1",
          "module": null,
          "cookie": 3
        },
        {
          "addr": 18446744071607392128,
          "func": "bpf_fentry_test2",
          "module": null,
          "cookie": 1
        },
        {
          "addr": 18446744071607392160,
          "func": "bpf_fentry_test3",
          "module": null,
          "cookie": 2
        }
      ]
    }

Cookie is attached to specific address, and because we sort addresses
before printing, we need to sort cookies the same way, hence adding
the struct addr_cookie to keep and sort them together.

Also adding missing dd.sym_count check to show_kprobe_multi_json.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-9-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Displaying cookie for perf event link probes, in plain mode:

  # bpftool link
  17: perf_event  prog 90
          kprobe ffffffff82b1c2b0 bpf_fentry_test1  cookie 3735928559
  18: perf_event  prog 90
          kretprobe ffffffff82b1c2b0 bpf_fentry_test1  cookie 3735928559
  20: perf_event  prog 92
          tracepoint sched_switch  cookie 3735928559
  21: perf_event  prog 93
          event software:page-faults  cookie 3735928559
  22: perf_event  prog 91
          uprobe /proc/self/exe+0xd703c  cookie 3735928559

And in json mode:

  # bpftool link -j | jq

  {
    "id": 30,
    "type": "perf_event",
    "prog_id": 160,
    "retprobe": false,
    "addr": 18446744071607272112,
    "func": "bpf_fentry_test1",
    "offset": 0,
    "missed": 0,
    "cookie": 3735928559
  }

  {
    "id": 33,
    "type": "perf_event",
    "prog_id": 162,
    "tracepoint": "sched_switch",
    "cookie": 3735928559
  }

  {
    "id": 34,
    "type": "perf_event",
    "prog_id": 163,
    "event_type": "software",
    "event_config": "page-faults",
    "cookie": 3735928559
  }

  {
    "id": 35,
    "type": "perf_event",
    "prog_id": 161,
    "retprobe": false,
    "file": "/proc/self/exe",
    "offset": 880700,
    "cookie": 3735928559
  }
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-8-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Adding fill_link_info test for perf event and testing we
get its values back through the bpf_link_info interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-7-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now that we get cookies for perf_event probes, adding tests
for cookie for kprobe/uprobe/tracepoint.

The perf_event test needs to be added completely and is coming
in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-6-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Adding cookies check for kprobe_multi fill_link_info test,
plus tests for invalid values related to cookies.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-5-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The error path frees wrong array, it should be ref_ctr_offsets.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Fixes: a7795698 ("bpftool: Add support to display uprobe_multi links")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-4-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Storing cookies in kprobe_multi bpf_link_info data. The cookies
field is optional and if provided it needs to be an array of
__u64 with kprobe_multi.count length.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-3-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.

Adding cookie fields to struct bpf_link_info perf event
probe records:

  perf_event.uprobe
  perf_event.kprobe
  perf_event.tracepoint
  perf_event.perf_event

And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Some of the BPF selftests use the "p" constraint in inline assembly
snippets, for input operands for MOV (rN = rM) instructions.

This is mainly done via the __imm_ptr macro defined in
tools/testing/selftests/bpf/progs/bpf_misc.h:

  #define __imm_ptr(name) [name]"p"(&name)

Example:

  int consume_first_item_only(void *ctx)
  {
        struct bpf_iter_num iter;
        asm volatile (
                /* create iterator */
                "r1 = %[iter];"
                [...]
                :
                : __imm_ptr(iter)
                : CLOBBERS);
        [...]
  }

The "p" constraint is a tricky one.  It is documented in the GCC manual
section "Simple Constraints":

  An operand that is a valid memory address is allowed.  This is for
  ``load address'' and ``push address'' instructions.

  p in the constraint must be accompanied by address_operand as the
  predicate in the match_operand.  This predicate interprets the mode
  specified in the match_operand as the mode of the memory reference for
  which the address would be valid.

There are two problems:

1. It is questionable whether that constraint was ever intended to be
   used in inline assembly templates, because its behavior really
   depends on compiler internals.  A "memory address" is not the same
   than a "memory operand" or a "memory reference" (constraint "m"), and
   in fact its usage in the template above results in an error in both
   x86_64-linux-gnu and bpf-unkonwn-none:

     foo.c: In function ‘bar’:
     foo.c:6:3: error: invalid 'asm': invalid expression as operand
        6 |   asm volatile ("r1 = %[jorl]" : : [jorl]"p"(&jorl));
          |   ^~~

   I would assume the same happens with aarch64, riscv, and most/all
   other targets in GCC, that do not accept operands of the form A + B
   that are not wrapped either in a const or in a memory reference.

   To avoid that error, the usage of the "p" constraint in internal GCC
   instruction templates is supposed to be complemented by the 'a'
   modifier, like in:

     asm volatile ("r1 = %a[jorl]" : : [jorl]"p"(&jorl));

   Internally documented (in GCC's final.cc) as:

     %aN means expect operand N to be a memory address
        (not a memory reference!) and print a reference
        to that address.

   That works because when the modifier 'a' is found, GCC prints an
   "operand address", which is not the same than an "operand".

   But...

2. Even if we used the internal 'a' modifier (we shouldn't) the 'rN =
   rM' instruction really requires a register argument.  In cases
   involving automatics, like in the examples above, we easily end with:

     bar:
        #APP
            r1 = r10-4
        #NO_APP

   In other cases we could conceibly also end with a 64-bit label that
   may overflow the 32-bit immediate operand of `rN = imm32'
   instructions:

        r1 = foo

   All of which is clearly wrong.

clang happens to do "the right thing" in the current usage of __imm_ptr
in the BPF tests, because even with -O2 it seems to "reload" the
fp-relative address of the automatic to a register like in:

  bar:
	r1 = r10
	r1 += -4
	#APP
	r1 = r1
	#NO_APP

Which is what GCC would generate with -O0.  Whether this is by chance
or by design, the compiler shouln't be expected to do that reload
driven by the "p" constraint.

This patch changes the usage of the "p" constraint in the BPF
selftests macros to use the "r" constraint instead.  If a register is
what is required, we should let the compiler know.

Previous discussion in bpf@vger:
https://lore.kernel.org/bpf/87h6p5ebpb.fsf@oracle.com/T/#ef0df83d6975c34dff20bf0dd52e078f5b8ca2767

Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240123181309.19853-1-jose.marchesi@oracle.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

GCC emits a warning:

  progs/test_tcpbpf_kern.c:60:9: error: ‘op’ is used uninitialized [-Werror=uninitialized]

when an uninialized op is used with a "+r" constraint.  The + modifier
means a read-write operand, but that operand in the selftest is just
written to.

This patch changes the selftest to use a "=r" constraint.  This
pacifies GCC.

Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: Yonghong Song <yhs@meta.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240123205624.14746-1-jose.marchesi@oracle.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

VLAs are not supported by either the BPF port of clang nor GCC.  The
selftest test_xdp_dynptr.c contains the following code:

  const size_t tcphdr_sz = sizeof(struct tcphdr);
  const size_t udphdr_sz = sizeof(struct udphdr);
  const size_t ethhdr_sz = sizeof(struct ethhdr);
  const size_t iphdr_sz = sizeof(struct iphdr);
  const size_t ipv6hdr_sz = sizeof(struct ipv6hdr);

  [...]

  static __always_inline int handle_ipv4(struct xdp_md *xdp, struct bpf_dynptr *xdp_ptr)
  {
	__u8 eth_buffer[ethhdr_sz + iphdr_sz + ethhdr_sz];
	__u8 iph_buffer_tcp[iphdr_sz + tcphdr_sz];
	__u8 iph_buffer_udp[iphdr_sz + udphdr_sz];
	[...]
  }

The eth_buffer, iph_buffer_tcp and other automatics are fixed size
only if the compiler optimizes away the constant global variables.
clang does this, but GCC does not, turning these automatics into
variable length arrays.

This patch removes the global variables and turns these values into
preprocessor constants.  This makes the selftest to build properly
with GCC.

Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Cc: Yonghong Song <yhs@meta.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: david.faust@oracle.com
Cc: cupertino.miranda@oracle.com
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240123201729.16173-1-jose.marchesi@oracle.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We've ran into issues with using dup2() API in production setting, where
libbpf is linked into large production environment and ends up calling
unintended custom implementations of dup2(). These custom implementations
don't provide atomic FD replacement guarantees of dup2() syscall,
leading to subtle and hard to debug issues.

To prevent this in the future and guarantee that no libc implementation
will do their own custom non-atomic dup2() implementation, call dup2()
syscall directly with syscall(SYS_dup2).

Note that some architectures don't seem to provide dup2 and have dup3
instead. Try to detect and pick best syscall.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240119210201.1295511-1-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Hou Tao says:

====================
Enable the inline of kptr_xchg for arm64

From: Hou Tao <houtao1@huawei.com>

Hi,

The patch set is just a follow-up for "bpf: inline bpf_kptr_xchg()". It
enables the inline of bpf_kptr_xchg() and kptr_xchg_inline test for
arm64.

Please see individual patches for more details. And comments are always
welcome.
====================

Link: https://lore.kernel.org/r/20240119102529.99581-1-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now arm64 bpf jit has enable bpf_jit_supports_ptr_xchg(), so enable
the test for arm64 as well.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240119102529.99581-3-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

ARM64 bpf jit satisfies the following two conditions:
1) support BPF_XCHG() on pointer-sized word.
2) the implementation of xchg is the same as atomic_xchg() on
   pointer-sized words. Both of these two functions use arch_xchg() to
   implement the exchange.

So enable the inline of bpf_kptr_xchg() for arm64 bpf jit.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240119102529.99581-2-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Per discussion on the mailing list at
https://mailarchive.ietf.org/arch/msg/bpf/uQiqhURdtxV_ZQOTgjCdm-seh74/
the MOVSX operation is only defined to support register extension.

The document didn't previously state this and incorrectly implied
that one could use an immediate value.
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240118232954.27206-1-dthaler1968@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

kernel test robot reported the warning below:

  >> net/core/filter.c:11842:13: warning: declaration of 'struct bpf_tcp_req_attrs' will not be visible outside of this function [-Wvisibility]
      11842 |                                         struct bpf_tcp_req_attrs *attrs, int attrs__sz)
            |                                                ^
     1 warning generated.

struct bpf_tcp_req_attrs is defined under CONFIG_SYN_COOKIES
but used in kfunc without the config.

Let's move struct bpf_tcp_req_attrs definition outside of
CONFIG_SYN_COOKIES guard.

Fixes: e472f888 ("bpf: tcp: Support arbitrary SYN Cookie.")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401180418.CUVc0hxF-lkp@intel.com/Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240118211751.25790-1-kuniyu@amazon.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Current checking rules are structured to disallow alu on particular ptr
types explicitly, so default cases are allowed implicitly. This may lead
to newly added ptr types being allowed unexpectedly. So restruture it to
allow alu explicitly. The tradeoff is mainly a bit more cases added in
the switch. The following table from Eduard summarizes the rules:

        | Pointer type        | Arithmetics allowed |
        |---------------------+---------------------|
        | PTR_TO_CTX          | yes                 |
        | CONST_PTR_TO_MAP    | conditionally       |
        | PTR_TO_MAP_VALUE    | yes                 |
        | PTR_TO_MAP_KEY      | yes                 |
        | PTR_TO_STACK        | yes                 |
        | PTR_TO_PACKET_META  | yes                 |
        | PTR_TO_PACKET       | yes                 |
        | PTR_TO_PACKET_END   | no                  |
        | PTR_TO_FLOW_KEYS    | conditionally       |
        | PTR_TO_SOCKET       | no                  |
        | PTR_TO_SOCK_COMMON  | no                  |
        | PTR_TO_TCP_SOCK     | no                  |
        | PTR_TO_TP_BUFFER    | yes                 |
        | PTR_TO_XDP_SOCK     | no                  |
        | PTR_TO_BTF_ID       | yes                 |
        | PTR_TO_MEM          | yes                 |
        | PTR_TO_BUF          | yes                 |
        | PTR_TO_FUNC         | yes                 |
        | CONST_PTR_TO_DYNPTR | yes                 |

The refactored rules are equivalent to the original one. Note that
PTR_TO_FUNC and CONST_PTR_TO_DYNPTR are not reject here because: (1)
check_mem_access() rejects load/store on those ptrs, and those ptrs
with offset passing to calls are rejected check_func_arg_reg_off();
(2) someone may rely on the verifier not rejecting programs earily.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240117094012.36798-1-sunhao.th@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Check that bpf_object__load() successfully creates map_in_maps
with BPF_MAP_TYPE_PERF_EVENT_ARRAY values.
These changes cover fix in the previous patch
"libbpf: Apply map_set_def_max_entries() for inner_maps on creation".

A command line output is:
- w/o fix
$ sudo ./test_maps
libbpf: map 'mim_array_pe': failed to create inner map: -22
libbpf: map 'mim_array_pe': failed to create: Invalid argument(-22)
libbpf: failed to load object './test_map_in_map.bpf.o'
Failed to load test prog

- with fix
$ sudo ./test_maps
...
test_maps: OK, 0 SKIPPED

Fixes: 646f02ff ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-2-conquistador@yandex-team.ruSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This patch allows to auto create BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS with values of BPF_MAP_TYPE_PERF_EVENT_ARRAY
by bpf_object__load().

Previous behaviour created a zero filled btf_map_def for inner maps and
tried to use it for a map creation but the linux kernel forbids to create
a BPF_MAP_TYPE_PERF_EVENT_ARRAY map with max_entries=0.

Fixes: 646f02ff ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-1-conquistador@yandex-team.ruSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Both commit 91051f00 ("tcp: Dump bound-only sockets in inet_diag.")
and commit 985b8ea9ec7e ("bpf, docs: Fix bpf_redirect_peer header doc")
missed the tooling header sync. Fix it.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Amend the bpf_redirect_peer() header documentation to also mention
support for the netkit device type.
Signed-off-by: Victor Stewart <v@nametag.social>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240116202952.241009-1-v@nametag.socialSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Kuniyuki Iwashima says:

====================
Under SYN Flood, the TCP stack generates SYN Cookie to remain stateless
for the connection request until a valid ACK is responded to the SYN+ACK.

The cookie contains two kinds of host-specific bits, a timestamp and
secrets, so only can it be validated by the generator.  It means SYN
Cookie consumes network resources between the client and the server;
intermediate nodes must remember which nodes to route ACK for the cookie.

SYN Proxy reduces such unwanted resource allocation by handling 3WHS at
the edge network.  After SYN Proxy completes 3WHS, it forwards SYN to the
backend server and completes another 3WHS.  However, since the server's
ISN differs from the cookie, the proxy must manage the ISN mappings and
fix up SEQ/ACK numbers in every packet for each connection.  If a proxy
node goes down, all the connections through it are terminated.  Keeping
a state at proxy is painful from that perspective.

At AWS, we use a dirty hack to build truly stateless SYN Proxy at scale.
Our SYN Proxy consists of the front proxy layer and the backend kernel
module.  (See slides of LPC2023 [0], p37 - p48)

The cookie that SYN Proxy generates differs from the kernel's cookie in
that it contains a secret (called rolling salt) (i) shared by all the proxy
nodes so that any node can validate ACK and (ii) updated periodically so
that old cookies cannot be validated and we need not encode a timestamp for
the cookie.  Also, ISN contains WScale, SACK, and ECN, not in TS val.  This
is not to sacrifice any connection quality, where some customers turn off
TCP timestamps option due to retro CVE.

After 3WHS, the proxy restores SYN, encapsulates ACK into SYN, and forward
the TCP-in-TCP packet to the backend server.  Our kernel module works at
Netfilter input/output hooks and first feeds SYN to the TCP stack to
initiate 3WHS.  When the module is triggered for SYN+ACK, it looks up the
corresponding request socket and overwrites tcp_rsk(req)->snt_isn with the
proxy's cookie.  Then, the module can complete 3WHS with the original ACK
as is.

This way, our SYN Proxy does not manage the ISN mappings nor wait for
SYN+ACK from the backend thus can remain stateless.  It's working very
well for high-bandwidth services like multiple Tbps, but we are looking
for a way to drop the dirty hack and further optimise the sequences.

If we could validate an arbitrary SYN Cookie on the backend server with
BPF, the proxy would need not restore SYN nor pass it.  After validating
ACK, the proxy node just needs to forward it, and then the server can do
the lightweight validation (e.g. check if ACK came from proxy nodes, etc)
and create a connection from the ACK.

This series allows us to create a full sk from an arbitrary SYN Cookie,
which is done in 3 steps.

  1) At tc, BPF prog calls a new kfunc to create a reqsk and configure
     it based on the argument populated from SYN Cookie.  The reqsk has
     its listener as req->rsk_listener and is passed to the TCP stack as
     skb->sk.

  2) During TCP socket lookup for the skb, skb_steal_sock() returns a
     listener in the reuseport group that inet_reqsk(skb->sk)->rsk_listener
     belongs to.

  3) In cookie_v[46]_check(), the reqsk (skb->sk) is fully initialised and
     a full sk is created.

The kfunc usage is as follows:

    struct bpf_tcp_req_attrs attrs = {
        .mss = mss,
        .wscale_ok = wscale_ok,
        .rcv_wscale = rcv_wscale, /* Server's WScale < 15 */
        .snd_wscale = snd_wscale, /* Client's WScale < 15 */
        .tstamp_ok = tstamp_ok,
        .rcv_tsval = tsval,
        .rcv_tsecr = tsecr, /* Server's Initial TSval */
        .usec_ts_ok = usec_ts_ok,
        .sack_ok = sack_ok,
        .ecn_ok = ecn_ok,
    }

    skc = bpf_skc_lookup_tcp(...);
    sk = (struct sock *)bpf_skc_to_tcp_sock(skc);
    bpf_sk_assign_tcp_reqsk(skb, sk, attrs, sizeof(attrs));
    bpf_sk_release(skc);

[0]: https://lpc.events/event/17/contributions/1645/attachments/1350/2701/SYN_Proxy_at_Scale_with_BPF.pdf

Changes:
  v8
    * Rebase on Yonghong's cpuv4 fix
    * Patch 5
      * Fill the trailing 3-bytes padding in struct bpf_tcp_req_attrs
        and test it as null
    * Patch 6
      * Remove unused IPPROTP_MPTCP definition

  v7: https://lore.kernel.org/bpf/20231221012806.37137-1-kuniyu@amazon.com/
    * Patch 5 & 6
      * Drop MPTCP support

  v6: https://lore.kernel.org/bpf/20231214155424.67136-1-kuniyu@amazon.com/
    * Patch 5 & 6
      * /struct /s/tcp_cookie_attributes/bpf_tcp_req_attrs/
      * Don't reuse struct tcp_options_received and use u8 for each attrs
    * Patch 6
      * Check retval of test__start_subtest()

  v5: https://lore.kernel.org/netdev/20231211073650.90819-1-kuniyu@amazon.com/
    * Split patch 1-3
    * Patch 3
      * Clear req->rsk_listener in skb_steal_sock()
    * Patch 4 & 5
      * Move sysctl validation and tsoff init from cookie_bpf_check() to kfunc
    * Patch 5
      * Do not increment LINUX_MIB_SYNCOOKIES(RECV|FAILED)
    * Patch 6
      * Remove __always_inline
      * Test if tcp_handle_{syn,ack}() is executed
      * Move some definition to bpf_tracing_net.h
      * s/BPF_F_CURRENT_NETNS/-1/

  v4: https://lore.kernel.org/bpf/20231205013420.88067-1-kuniyu@amazon.com/
    * Patch 1 & 2
      * s/CONFIG_SYN_COOKIE/CONFIG_SYN_COOKIES/
    * Patch 1
      * Don't set rcv_wscale for BPF SYN Cookie case.
    * Patch 2
      * Add test for tcp_opt.{unused,rcv_wscale} in kfunc
      * Modify skb_steal_sock() to avoid resetting skb-sk
      * Support SO_REUSEPORT lookup
    * Patch 3
      * Add CONFIG_SYN_COOKIES to Kconfig for CI
      * Define BPF_F_CURRENT_NETNS

  v3: https://lore.kernel.org/netdev/20231121184245.69569-1-kuniyu@amazon.com/
    * Guard kfunc and req->syncookie part in inet6?_steal_sock() with
      CONFIG_SYN_COOKIE

  v2: https://lore.kernel.org/netdev/20231120222341.54776-1-kuniyu@amazon.com/
    * Drop SOCK_OPS and move SYN Cookie validation logic to TC with kfunc.
    * Add cleanup patches to reduce discrepancy between cookie_v[46]_check()

  v1: https://lore.kernel.org/bpf/20231013220433.70792-1-kuniyu@amazon.com/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This commit adds a sample selftest to demonstrate how we can use
bpf_sk_assign_tcp_reqsk() as the backend of SYN Proxy.

The test creates IPv4/IPv6 x TCP connections and transfer messages
over them on lo with BPF tc prog attached.

The tc prog will process SYN and returns SYN+ACK with the following
ISN and TS.  In a real use case, this part will be done by other
hosts.

        MSB                                   LSB
  ISN:  | 31 ... 8 | 7 6 |   5 |    4 | 3 2 1 0 |
        |   Hash_1 | MSS | ECN | SACK |  WScale |

  TS:   | 31 ... 8 |          7 ... 0           |
        |   Random |           Hash_2           |

  WScale in SYN is reused in SYN+ACK.

The client returns ACK, and tc prog will recalculate ISN and TS
from ACK and validate SYN Cookie.

If it's valid, the prog calls kfunc to allocate a reqsk for skb and
configure the reqsk based on the argument created from SYN Cookie.

Later, the reqsk will be processed in cookie_v[46]_check() to create
a connection.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-7-kuniyu@amazon.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds a new kfunc available at TC hook to support arbitrary
SYN Cookie.

The basic usage is as follows:

    struct bpf_tcp_req_attrs attrs = {
        .mss = mss,
        .wscale_ok = wscale_ok,
        .rcv_wscale = rcv_wscale, /* Server's WScale < 15 */
        .snd_wscale = snd_wscale, /* Client's WScale < 15 */
        .tstamp_ok = tstamp_ok,
        .rcv_tsval = tsval,
        .rcv_tsecr = tsecr, /* Server's Initial TSval */
        .usec_ts_ok = usec_ts_ok,
        .sack_ok = sack_ok,
        .ecn_ok = ecn_ok,
    }

    skc = bpf_skc_lookup_tcp(...);
    sk = (struct sock *)bpf_skc_to_tcp_sock(skc);
    bpf_sk_assign_tcp_reqsk(skb, sk, attrs, sizeof(attrs));
    bpf_sk_release(skc);

bpf_sk_assign_tcp_reqsk() takes skb, a listener sk, and struct
bpf_tcp_req_attrs and allocates reqsk and configures it.  Then,
bpf_sk_assign_tcp_reqsk() links reqsk with skb and the listener.

The notable thing here is that we do not hold refcnt for both reqsk
and listener.  To differentiate that, we mark reqsk->syncookie, which
is only used in TX for now.  So, if reqsk->syncookie is 1 in RX, it
means that the reqsk is allocated by kfunc.

When skb is freed, sock_pfree() checks if reqsk->syncookie is 1,
and in that case, we set NULL to reqsk->rsk_listener before calling
reqsk_free() as reqsk does not hold a refcnt of the listener.

When the TCP stack looks up a socket from the skb, we steal the
listener from the reqsk in skb_steal_sock() and create a full sk
in cookie_v[46]_check().

The refcnt of reqsk will finally be set to 1 in tcp_get_cookie_sock()
after creating a full sk.

Note that we can extend struct bpf_tcp_req_attrs in the future when
we add a new attribute that is determined in 3WHS.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-6-kuniyu@amazon.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We will support arbitrary SYN Cookie with BPF in the following
patch.

If BPF prog validates ACK and kfunc allocates a reqsk, it will
be carried to cookie_[46]_check() as skb->sk.  If skb->sk is not
NULL, we call cookie_bpf_check().

Then, we clear skb->sk and skb->destructor, which are needed not
to hold refcnt for reqsk and the listener.  See the following patch
for details.

After that, we finish initialisation for the remaining fields with
cookie_tcp_reqsk_init().

Note that the server side WScale is set only for non-BPF SYN Cookie.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-5-kuniyu@amazon.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We will support arbitrary SYN Cookie with BPF.

If BPF prog validates ACK and kfunc allocates a reqsk, it will
be carried to TCP stack as skb->sk with req->syncookie 1.  Also,
the reqsk has its listener as req->rsk_listener with no refcnt
taken.

When the TCP stack looks up a socket from the skb, we steal
inet_reqsk(skb->sk)->rsk_listener in skb_steal_sock() so that
the skb will be processed in cookie_v[46]_check() with the
listener.

Note that we do not clear skb->sk and skb->destructor so that we
can carry the reqsk to cookie_v[46]_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-4-kuniyu@amazon.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

It is possible for bpf_kfunc_call_test_release() to be called from
bpf_map_free_deferred() when bpf_testmod is already unloaded and
perf_test_stuct.cnt which it tries to decrease is no longer in memory.
This patch tries to fix the issue by waiting for all references to be
dropped in bpf_testmod_exit().

The issue can be triggered by running 'test_progs -t map_kptr' in 6.5,
but is obscured in 6.6 by d119357d ("rcu-tasks: Treat only
synchronous grace periods urgently").

Fixes: 65eb006d ("bpf: Move kernel test kfuncs to bpf_testmod")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/82f55c0e-0ec8-4fe1-8d8c-b1de07558ad9@linux.dev
Link: https://lore.kernel.org/bpf/20240110085737.8895-1-asavkov@redhat.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>