- 22 May, 2020 1 commit
-
-
Jonathan Bakker authored
The light sensor needs the regulators to be enabled which means the runtime PM needs to be on. This only happened when the proximity part of the chip was enabled. As fallout from this change, only report changes to the prox state in the interrupt handler when it is explicitly enabled. Fixes: 97d642e2 ("iio: light: Add a driver for Sharp GP2AP002x00F") Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 21 May, 2020 4 commits
-
-
Alexandru Ardelean authored
Since there will be some changes to how iio_priv_to_dev() is implemented, it could be that the helper becomes a bit slower, as it will be hidden away in the IIO core. But even without that rework, this looks like it can pass the 'indio_dev' object to ping_read() and obtain the state struct via iio_priv() which is a preferred practice than going back-n-forth (getting the state-struct, then using iio_priv_to_dev() to get the indio_dev object back). Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. This also removes unused iio_dev pointers. Signed-off-by:
Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by:
-
Ivan Mikhaylov authored
Proximity sensor driver based on light/vcnl4000.c code. For now supports only the single on-demand measurement. The VCNL3020 is a fully integrated proximity sensor. Fully integrated means that the infrared emitter is included in the package. It has 16-bit resolution. It includes a signal processing IC and features standard I2C communication interface. It features an interrupt function. Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdfSigned-off-by:
Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Ivan Mikhaylov authored
Mostly standard i2c driver with some additional led-current option for vcnl3020. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 16 May, 2020 23 commits
-
-
Alexandru Ardelean authored
The variable no longer does anything. It should have been removed with commit 2e036804 ("iio: buffer: remove 'scan_el_attrs' attribute group from buffer struct"). That was about the last time this was needed. Signed-off-by:
-
Matt Ranostay authored
Add driver for Atlas EZO line of sensors with initial support for CO2 the sensor. This is effectively ASCII strings proxied over I2C due to these series of sensors being by default UART. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Matt Ranostay authored
Cc: devicetree@vger.kernel.org Signed-off-by:
-
Krzysztof Kozlowski authored
The Exynos7-specific code bits in ADC driver do not play with PHY: the field exynos_adc_data.needs_adc_phy is not set in exynos7_adc_data instance. Therefore the initialization code does not have to check if it is true. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Tested-by:
-
Jonathan Bakker authored
Currently the driver only exposes the raw counts. As we have the regulator voltage and the maximum value (stored in the data mask), we can trivially produce a scaling fraction of voltage / max value. This assumes that the regulator voltage is in fact the max voltage, which appears to be the case for all mainline dts and cross referenced with the public Exynos4412 and S5PV210 datasheets. Signed-off-by:
-
Lars-Peter Clausen authored
It is clear that we transition to INDIO_DIRECT_MODE when disabling the buffer(s) and it is also clear that we transition from INDIO_DIRECT_MODE when enabling the buffer(s). So leaving the currentmode field INDIO_DIRECT_MODE until after the preenable() callback and updating it to INDIO_DIRECT_MODE before the postdisable() callback doesn't add additional value. On the other hand some drivers will need to perform different actions depending on which mode the device is going to operate in/was operating in. Moving the update of currentmode before preenable() and after postdisable() enables us to have drivers which perform mode dependent actions in those callbacks. Note, was originally not intended as such, but fixes an issue introduced in the at91-sama5d2 adc driver. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. This also changes some internal functions to pass the pointer to the state-struct vs a ref to indio_dev just to access the state-struct again. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. Signed-off-by:
-
Sergiu Cuciurean authored
As part of the general cleanup of indio_dev->mlock, this change replaces it with a local lock on the device's state structure. This also changes some internal functions to pass the pointer to the state-struct vs a ref to indio_dev just to access the state-struct again. Signed-off-by:
-
Jonathan Bakker authored
The bma150/smb380 are very similar to the bma023 but have a temperature channel as well. Signed-off-by:
-
Jonathan Bakker authored
The bma180 driver is being extended to support the bma150. Its temperature channel is unsigned so the center_temp naming no longer makes. Signed-off-by:
-
Jonathan Bakker authored
The bma023 chip is similar enough to the bma180 and bma25x that the same driver can support all of them. The biggest differences are the lack of a temperature channel and no low power but still working mode. The bma150 is a close relative of the bma023, but it does have a temperature channel so support is not added for it. Reviewed-by:
-
Jonathan Bakker authored
The bma180 and related chips should have two regulators attached to them. The IIO driver currently uses them, document them here as well. Acked-by:
-
Jonathan Bakker authored
The bma023, bma150, and smb380 are in the same family as the bma180 and support is being added to the bma180 IIO driver for them. Reviewed-by:
-
Jonathan Bakker authored
The bma180 IIO driver is being extended for support for the chips support by input's bma150 driver (bma023, bma150, smb380). Don't allow both drivers to be enabled simultaneously as they're for the same hardware. Signed-off-by:
-
Jonathan Bakker authored
Some variants of the bma180 (eg bma023) have different reset values. In preparation for adding support for them, factor out the reset value into the chip specific data. Reviewed-by:
-
- 15 May, 2020 12 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, cleanups and features for IIO in the 5.8 cycle Usual mixed back but with a few subsystem wide or device type wide cleanups. New device support * adis16475 - New driver supporting adis16470, adis16475, adis16477, adis16465, adis16467, adis16500, adis16505 and adis16507. Includes some rework of the adis library to simplify using it for this new driver. * ak8974 - Add support for Alps hscdt008a. ID only. Related patches add support for scale. * atlas-sensor - Add support for RTD-SM OEM temperature sensor. * cm32181 - Add support for CM3218 including support for SMBUS alert via ACPI resources. * ltc2632 - Add support for ltc2634-12/10/8 DACS including handling per device type numbers of channels. Major Features * cm32181 - ACPI bindings including parsing CPM0 and CPM1 custom ACPI tables. Includes minor tidy ups and fixes. * vcnl4000 - Add event support - Add buffered data capture support - Add control of sampling frequency Cleanups and minor fixes. * core - Trivial rework of iio_device_alloc to use an early return and improve readability. - Precursors to addition of multiple buffer support. So far minor refactoring. * subsystem wide - Use get_unaligned_be24 slightly improve readability over open coding it. * adis drivers - Use iio_get_debugfs_dentry access function. * bh1780, cm32181, cm3232, gp2ap02a00f, opt3001, st_uvis25, vl6180, dmard06, kxsd9 - Drop use of of_match_ptr to allow ACPI based probing via PRP0001. Part of clear out of this to avoid cut and paste into new drivers. * ad5592r, ad5593r - Fix typos * ad5933 - Use managed interfaces to automate error handling and remove. * ak8974 - Fix wrong number of 'real bits' for buffered data. - Refactor to pull measurement code out as separate function. bmp280 - Fix lack of clamp on range during data capture. * at91-sama5d2_adc - Handle unfinished conversions correctly. - Allow use of triggers other than it's own. - Reorganize buffer setup and tear down as part of long running subsystem wide rework. * ccs811 - Add DT binding docs and match table. - Support external reset and wakeup pins. * hid-sensors - Reorganize buffer setup and tear down as part of long running subsystem wide rework. * ltr501 - Constify some structs. * vcnl4000 - Fix an endian issue by using explicit byte swapped i2c accessors. * tag 'iio-for-5.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (74 commits) iio: light: ltr501: Constify structs staging: iio: ad5933: attach life-cycle of kfifo buffer to parent device and use managed calls throughout iio: bmp280: fix compensation of humidity iio: light: cm32181: Fix integartion time typo iio: light: cm32181: Add support for parsing CPM0 and CPM1 ACPI tables iio: light: cm32181: Make lux_per_bit and lux_per_bit_base_it runtime settings iio: light: cm32181: Use units of 1/100000th for calibscale and lux_per_bit iio: light: cm32181: Change reg_init to use a bitmap of which registers to init iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources iio: light: cm32181: Clean up the probe function a bit iio: light: cm32181: Add support for the CM3218 iio: light: cm32181: Add some extra register defines iio: light: cm32181: Add support for ACPI enumeration iio: light: cm32181: Switch to new style i2c-driver probe function iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger iio: vcnl4000: Add buffer support for VCNL4010/20. iio: vcnl4000: Add sampling frequency support for VCNL4010/20. iio: vcnl4000: Add event support for VCNL4010/20. iio: vcnl4000: Factorize data reading and writing. iio: vcnl4000: Fix i2c swapped word reading. ...
-
Jérôme Pouiller authored
When a station is removed, the driver check that all the Tx frames were correctly sent. However, the station can be removed before all the Tx frames were acknowledged and a false positive warning can be emitted. The previous commit has added a trace when driver received an acknowledge for a non-existent station. It appear that these events are perfectly correlated and there is no leak. Now, the subject is perfectly understood. Remove the warning. Just keep a debug trace in case we have any doubt in the future. In the past, the subject has already been discussed here: https://lore.kernel.org/driverdev-devel/6287924.ghGFUMk3OD@pc-42/ Fixes: 4bbc6a3e ("staging: wfx: make warning about pending frame less scary") Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200515083325.378539-20-Jerome.Pouiller@silabs.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Pouiller authored
Some resources are associated to the outgoing of the stations. To avoid any resource leaks. It is important to understand why an acknowledge is not associated to any station. Add a trace for that purpose. Signed-off-by:
-
Jérôme Pouiller authored
The function wfx_tx_flush() wait for there is no more queued frames in hardware queue. Then, for the sanity, it checks that there is no more pending frame on any AC queue. However, there is a race here. It may happens that hardware queues are empty, but the counters of the AC queues are not yet updated. So, it may produce false-positive warning. The easiest way to solve the problem is just to remove the sanity check. Signed-off-by:
-
Jérôme Pouiller authored
If AP did not start, the error was not reported to mac80211. Signed-off-by:
-
Jérôme Pouiller authored
Currently, when mac80211 want to disable beacon filtering, the driver reset the filter table and disable the beacon filtering. Only the latter action is required. Signed-off-by:
-
Jérôme Pouiller authored
When multiple vif are in use (= one access point and one station), and when the channels are different, it is necessary to enable power save on station. The firmware check that steps are done in the correct order: - AP can't start if PS is not enable on the station - PS can't set on the station before the association has finished (= before the call set_bss_params) Obviously, in add, when one of the interface disappears, it is necessary to restore the power save status. wfx_update_pm() is able to set the correct PS configuration. But it has to be called at the right time: 1. before hif_start(), but after the channel configuration is known 2. after hif_set_bss_params() 3. after hif_reset() Therefore, the call to wfx_update_pm() from wfx_add_interface() is too early to address 1. The call after hif_set_bss_params() already exists. For the symmetry, the call from wfx_remove_interface() (that handle 3.) is also relocated. Signed-off-by: -
Jérôme Pouiller authored
The device disallows to start a scan request between hif_join() and hif_set_bss_params(). The driver is not protected against that. The worst case happens when association is aborted and hif_set_bss_params() never happens. mac80211 would never ask for scan during the association process. So, this patch just aborts the association in progress when scan is requested. Signed-off-by:
-
Jérôme Pouiller authored
wfx_stop_ap() and wfx_reset() do the same thing. Merge them. Signed-off-by:
-
Jérôme Pouiller authored
In fact, wfx_do_unjoin() resets the interface. This mechanism can be used in more cases than just disassociating from a BSS. So, rename it to reflect that fact. Signed-off-by:
-
Jérôme Pouiller authored
wfx_tx_policy_put() use data from the skb. However, the call to skb_pull() has just discarded them (even if the memory is in fact not really discarded). Signed-off-by:
-
Jérôme Pouiller authored
The function wfx_notify_buffered_tx() need to know if the frame was associated to a station. This information is available in the Control Buffer (CB) of the skb. However, when wfx_notify_buffered_tx() is called, the CB is no more available. Thus, the caller has to take care of this information. wfx_notify_buffered_tx() is a specific case. All the other function are called before the destruction of the CB. So, this patch align the API of wfx_notify_buffered_tx() with the other functions. Call it before the CB was destroyed and drop the extra argument 'has_sta'. It is also the right time to rename it into wfx_tx_update_sta() (which is closer to the behavior of the function). Signed-off-by:
-
