- 04 Oct, 2019 5 commits
-
-
Kai Vehmanen authored
The CDCLK>=2*BCLK constraint applies to all generations since gen10. Extend the constraint logic in audio get/put_power(). Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191003085531.30990-2-kai.vehmanen@linux.intel.com
-
Kai Vehmanen authored
On platfroms with gen10+ display, driver must set the enable bit of AUDIO_PIN_BUF_CTL register before transactions with the HDA controller can proceed. Add setting this bit to the audio power up sequence. Failing to do this resulted in errors during display audio codec probe, and failures during resume from suspend. Note: We may also need to disable the bit afterwards, but there are still unresolved issues with that. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111214Signed-off-by:
-
Jani Nikula authored
Add aux_busy_last_status to intel_dp. Don't bother with initializing to all ones; the only difference is potentially missing logging for one error case if the readout is all zeros. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
If we unwind the active requests, and on resubmission discover that we intend to preempt the active contexts with themselves, simply skip the ELSP submission. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191003210100.22250-1-chris@chris-wilson.co.uk
-
Imre Deak authored
The Thunderbolt PLL divider values on TGL differ from the ICL ones, update the PLL parameter calculation function accordingly. Bspec: 49204 v2: - Remove unused refclk config. (José) Cc: Jose Souza <jose.souza@intel.com> Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Mika Westerberg <mika.westerberg@intel.com> Tested-by:
Mika Westerberg <mika.westerberg@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Jose Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002204108.32242-1-imre.deak@intel.com
-
- 03 Oct, 2019 2 commits
-
-
Jani Nikula authored
Unify on current common usage to allow repurposing drm_dbg() later. Fix newlines while at it. Reviewed-by:
-
Jani Nikula authored
Unify on current common usage to allow repurposing drm_err() later. Fix newlines while at it. Reviewed-by:
-
- 02 Oct, 2019 11 commits
-
-
Chris Wilson authored
If execlists's lite-restore is based on the common GEM context tag rather than the per-intel_context LRCA, then a context switch between two intel_contexts on the same engine derived from the same GEM context will perform a lite-restore instead of a full context switch. We can exploit this by poisoning the ringbuffer of the first context and trying to trick a simple RING_TAIL update (i.e. lite-restore) v2: Also check what happens if preempt ce[0] with ce[1] (both instances on the same engine from the same parent context) [Tvrtko] Signed-off-by:
-
José Roberto de Souza authored
All the MG registers is based on the tc_port not port, so MG_PHY_PORT_LN() was subtracting port and PORT_C what is very fragile. So replacing port to tc_port in all MG register macros and users like we have for DKL. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Use BIT(pipe) for better legibility when populating the crtc_mask for encoders. Also remove the redundant possible_crtcs setup for the TV encoder. Reviewed-by:
-
Ville Syrjälä authored
Don't advertize non-exisiting crtcs in the encoder possible_crtcs bitmask. Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Chris Wilson authored
We repeat obj->ops->flags in our object checks, so pull that into its own little helper for clarity. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002123014.1545-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
For selftests, we desire repeatability and so prefer using a prng with known seed over true randomness. Extract random_offset() as a selftest utility that can take the prng state. Suggested-by:
-
Ville Syrjälä authored
I forgot to update the g4x sprite scaling stride check when GTT remapping was introduced. The stride of the original framebuffer is irrelevant when remapping is used and instead we want to check the stride of the remapped view. Also drop the duplicate width_bytes check. We already check that a few lines earlier. Fixes: df79cf44 ("drm/i915: Store the final plane stride in plane_state") Signed-off-by:
-
Ville Syrjälä authored
Drop the tv_mode NULL check since intel_tv_mode_find() never actually returns NULL, and flip the condition around so that the MODE_OK case is at the end, which is customary to all the other .mode_valid() implementations. Signed-off-by:
-
Ville Syrjälä authored
When adding the max plane size checks to the .mode_valid() hooks I naturally forgot about MST. Take care of that one as well. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <sean@poorly.run> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 2d20411e ("drm/i915: Don't advertise modes that exceed the max plane size") Signed-off-by:
-
Jani Nikula authored
Split out the code related to vga client and vgaarb all over the place into new intel_vga.[ch]. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to invalidate userptr objects which also happen to be pulled into GGTT mmaps. That is when we unbind the userptr object (on mmu invalidation), we revoke all CPU mmaps, which may then recurse into mmu invalidation. We looked for ways of breaking the cycle, but the revocation on invalidation is required and cannot be avoided. The only solution we could see was to not allow such GGTT bindings of userptr objects in the first place. In practice, no one really wants to use a GGTT mmapping of a CPU pointer... Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got a genuine blip from CI: <4>[ 246.793958] ====================================================== <4>[ 246.793972] WARNING: possible circular locking dependency detected <4>[ 246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G U <4>[ 246.794003] ------------------------------------------------------ <4>[ 246.794017] kswapd0/145 is trying to acquire lock: <4>[ 246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794250] but task is already holding lock: <4>[ 246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0 <4>[ 246.794291] which lock already depends on the new lock. <4>[ 246.794307] the existing dependency chain (in reverse order) is: <4>[ 246.794322] -> #3 (&anon_vma->rwsem){++++}: <4>[ 246.794344] down_write+0x33/0x70 <4>[ 246.794357] __vma_adjust+0x3d9/0x7b0 <4>[ 246.794370] __split_vma+0x16a/0x180 <4>[ 246.794385] mprotect_fixup+0x2a5/0x320 <4>[ 246.794399] do_mprotect_pkey+0x208/0x2e0 <4>[ 246.794413] __x64_sys_mprotect+0x16/0x20 <4>[ 246.794429] do_syscall_64+0x55/0x1c0 <4>[ 246.794443] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794456] -> #2 (&mapping->i_mmap_rwsem){++++}: <4>[ 246.794478] down_write+0x33/0x70 <4>[ 246.794493] unmap_mapping_pages+0x48/0x130 <4>[ 246.794519] i915_vma_revoke_mmap+0x81/0x1b0 [i915] <4>[ 246.794519] i915_vma_unbind+0x11d/0x4a0 [i915] <4>[ 246.794519] i915_vma_destroy+0x31/0x300 [i915] <4>[ 246.794519] __i915_gem_free_objects+0xb8/0x4b0 [i915] <4>[ 246.794519] drm_file_free.part.0+0x1e6/0x290 <4>[ 246.794519] drm_release+0xa6/0xe0 <4>[ 246.794519] __fput+0xc2/0x250 <4>[ 246.794519] task_work_run+0x82/0xb0 <4>[ 246.794519] do_exit+0x35b/0xdb0 <4>[ 246.794519] do_group_exit+0x34/0xb0 <4>[ 246.794519] __x64_sys_exit_group+0xf/0x10 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #1 (&vm->mutex){+.+.}: <4>[ 246.794519] i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915] <4>[ 246.794519] i915_address_space_init+0x9f/0x160 [i915] <4>[ 246.794519] i915_ggtt_init_hw+0x55/0x170 [i915] <4>[ 246.794519] i915_driver_probe+0xc9f/0x1620 [i915] <4>[ 246.794519] i915_pci_probe+0x43/0x1b0 [i915] <4>[ 246.794519] pci_device_probe+0x9e/0x120 <4>[ 246.794519] really_probe+0xea/0x3d0 <4>[ 246.794519] driver_probe_device+0x10b/0x120 <4>[ 246.794519] device_driver_attach+0x4a/0x50 <4>[ 246.794519] __driver_attach+0x97/0x130 <4>[ 246.794519] bus_for_each_dev+0x74/0xc0 <4>[ 246.794519] bus_add_driver+0x13f/0x210 <4>[ 246.794519] driver_register+0x56/0xe0 <4>[ 246.794519] do_one_initcall+0x58/0x300 <4>[ 246.794519] do_init_module+0x56/0x1f6 <4>[ 246.794519] load_module+0x25bd/0x2a40 <4>[ 246.794519] __se_sys_finit_module+0xd3/0xf0 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #0 (&dev->struct_mutex/1){+.+.}: <4>[ 246.794519] __lock_acquire+0x15d8/0x1e90 <4>[ 246.794519] lock_acquire+0xa6/0x1c0 <4>[ 246.794519] __mutex_lock+0x9d/0x9b0 <4>[ 246.794519] userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794519] __mmu_notifier_invalidate_range_start+0x85/0x110 <4>[ 246.794519] try_to_unmap_one+0x76b/0x860 <4>[ 246.794519] rmap_walk_anon+0x104/0x280 <4>[ 246.794519] try_to_unmap+0xc0/0xf0 <4>[ 246.794519] shrink_page_list+0x561/0xc10 <4>[ 246.794519] shrink_inactive_list+0x220/0x440 <4>[ 246.794519] shrink_node_memcg+0x36e/0x740 <4>[ 246.794519] shrink_node+0xcb/0x490 <4>[ 246.794519] balance_pgdat+0x241/0x580 <4>[ 246.794519] kswapd+0x16c/0x530 <4>[ 246.794519] kthread+0x119/0x130 <4>[ 246.794519] ret_from_fork+0x24/0x50 <4>[ 246.794519] other info that might help us debug this: <4>[ 246.794519] Chain exists of: &dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem <4>[ 246.794519] Possible unsafe locking scenario: <4>[ 246.794519] CPU0 CPU1 <4>[ 246.794519] ---- ---- <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&mapping->i_mmap_rwsem); <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&dev->struct_mutex/1); <4>[ 246.794519] *** DEADLOCK *** v2: Say no to mmap_ioctl Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870Signed-off-by:
-
- 01 Oct, 2019 2 commits
-
-
Srinivasan S authored
This patch avoids DP MST payload error message in dmesg, as it is trying to update the payload to the disconnected DP MST device. After DP MST device is disconnected we should not be updating the payload and hence remove the error. v2: Removed the connector status check and converted from error to debug. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111632Signed-off-by:
Srinivasan S <srinivasan.s@intel.com> Signed-off-by:
-
Chris Wilson authored
With deferring the breadcrumb signalling to the virtual engine (thanks preempt-to-busy) we need to make sure the lists and irq-worker are ready to send a signal. [41958.710544] BUG: kernel NULL pointer dereference, address: 0000000000000000 [41958.710553] #PF: supervisor write access in kernel mode [41958.710556] #PF: error_code(0x0002) - not-present page [41958.710558] PGD 0 P4D 0 [41958.710562] Oops: 0002 [#1] SMP [41958.710565] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G U 5.3.0+ #207 [41958.710568] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [41958.710602] RIP: 0010:i915_request_enable_breadcrumb+0xe1/0x130 [i915] [41958.710605] Code: 8b 44 24 30 48 89 41 08 48 89 08 48 8b 85 98 01 00 00 48 8d 8d 90 01 00 00 48 89 95 98 01 00 00 49 89 4c 24 28 49 89 44 24 30 <48> 89 10 f0 80 4b 30 10 c6 85 88 01 00 00 00 e9 1a ff ff ff 48 83 [41958.710609] RSP: 0018:ffffc90000003de0 EFLAGS: 00010046 [41958.710612] RAX: 0000000000000000 RBX: ffff888735424480 RCX: ffff8887cddb2190 [41958.710614] RDX: ffff8887cddb3570 RSI: ffff888850362190 RDI: ffff8887cddb2188 [41958.710617] RBP: ffff8887cddb2000 R08: ffff8888503624a8 R09: 0000000000000100 [41958.710619] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8887cddb3548 [41958.710622] R13: 0000000000000000 R14: 0000000000000046 R15: ffff888850362070 [41958.710625] FS: 0000000000000000(0000) GS:ffff88885ea00000(0000) knlGS:0000000000000000 [41958.710628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [41958.710630] CR2: 0000000000000000 CR3: 0000000002c09002 CR4: 00000000001606f0 [41958.710633] Call Trace: [41958.710636] <IRQ> [41958.710668] __i915_request_submit+0x12b/0x160 [i915] [41958.710693] virtual_submit_request+0x67/0x120 [i915] [41958.710720] __unwind_incomplete_requests+0x131/0x170 [i915] [41958.710744] execlists_dequeue+0xb40/0xe00 [i915] [41958.710771] execlists_submission_tasklet+0x10f/0x150 [i915] [41958.710776] tasklet_action_common.isra.17+0x41/0xa0 [41958.710781] __do_softirq+0xc8/0x221 [41958.710785] irq_exit+0xa6/0xb0 [41958.710788] smp_apic_timer_interrupt+0x4d/0x80 [41958.710791] apic_timer_interrupt+0xf/0x20 [41958.710794] </IRQ> Fixes: cb2377a9 ("drm/i915: Fixup preempt-to-busy vs reset of a virtual request") Signed-off-by:
-
- 30 Sep, 2019 2 commits
-
-
Chris Wilson authored
Unwedging the GPU requires a successful GPU reset before we restore the default submission, or else we may see residual context switch events that we were not expecting. v2: Pull in the special-case reset_clobbers_display, and explain why it should be safe in the context of unwedging. v3: Just forget all about resets before unwedging if it will clobber the display; risk it all. Reported-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
We currently test context switching on each engine as a basic stress test (just verifying that nothing explodes if we execute 2 requests from different contexts sequentially). What we have not tested is what happens if we try and do so on all available engines simultaneously, putting our SW and the HW under the maximal stress. v2: Clone the set of engines from the first context into the secondary contexts. Signed-off-by:
-
- 27 Sep, 2019 15 commits
-
-
Chris Wilson authored
For those mock tests that may wish to pretend triggering a GPU reset and processing the cleanup. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190927211749.2181-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
On systems that have no runtime-pm, we mark the wakeref as being -1. We therefore cannot use that value for the mock-gt indicator, so opt for -ENODEV instead. The wakeref should never be an error value -- one hopes! Signed-off-by:
-
Chris Wilson authored
As we execute GPU resets on a gt/ basis, and use the intel_gt as the primary for all other reset functions, also use it for the has-reset? predicates. Gradually simplifying the churn of pointers. Signed-off-by:
-
Chris Wilson authored
If we are mocking the device, skip trying to sanitize the pm HW state. Signed-off-by:
-
Matthew Auld authored
i915_gem_init_early doesn't need to return anything. Signed-off-by:
-
Matthew Auld authored
Explosions during early driver init on the error path. Make sure we fail gracefully. [ 9547.672258] BUG: kernel NULL pointer dereference, address: 000000000000007c [ 9547.672288] #PF: supervisor read access in kernel mode [ 9547.672292] #PF: error_code(0x0000) - not-present page [ 9547.672296] PGD 8000000846b41067 P4D 8000000846b41067 PUD 797034067 PMD 0 [ 9547.672303] Oops: 0000 [#1] SMP PTI [ 9547.672307] CPU: 1 PID: 25634 Comm: i915_selftest Tainted: G U 5.3.0-rc8+ #73 [ 9547.672313] Hardware name: /NUC6i7KYB, BIOS KYSKLi70.86A.0050.2017.0831.1924 08/31/2017 [ 9547.672395] RIP: 0010:intel_context_unpin+0x9/0x100 [i915] [ 9547.672400] Code: 6b 60 00 e9 17 ff ff ff bd fc ff ff ff e9 7c ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 41 54 55 53 <8b> 47 7c 83 f8 01 74 26 8d 48 ff f0 0f b1 4f 7c 48 8d 57 7c 75 05 [ 9547.672413] RSP: 0018:ffffae8ac24ff878 EFLAGS: 00010246 [ 9547.672417] RAX: ffff944a1b7842d0 RBX: ffff944a1b784000 RCX: ffff944a12dd6fa8 [ 9547.672422] RDX: ffff944a1b7842c0 RSI: ffff944a12dd5328 RDI: 0000000000000000 [ 9547.672428] RBP: 0000000000000000 R08: ffff944a11e5d840 R09: 0000000000000000 [ 9547.672433] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 9547.672438] R13: ffffffffc11aaf00 R14: 00000000ffffffe4 R15: ffff944a0e29bf38 [ 9547.672443] FS: 00007fc259b88ac0(0000) GS:ffff944a1f880000(0000) knlGS:0000000000000000 [ 9547.672449] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9547.672454] CR2: 000000000000007c CR3: 0000000853346003 CR4: 00000000003606e0 [ 9547.672459] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9547.672464] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9547.672469] Call Trace: [ 9547.672518] intel_engine_cleanup_common+0xe3/0x270 [i915] [ 9547.672567] execlists_destroy+0xe/0x30 [i915] [ 9547.672669] intel_engines_init+0x94/0xf0 [i915] [ 9547.672749] i915_gem_init+0x191/0x950 [i915] Signed-off-by:
-
Lucas De Marchi authored
Now that TC support was added, initialize DDIs. Reviewed-by:
-
José Roberto de Souza authored
Link training is failling when running link at 2.7GHz and 1.62GHz and following BSpec pll algorithm. Comparing the values calculated and the ones from the reference table it looks like MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO should not always set to 5. For DP ports ICL mg pll algorithm sets it to 10 or 5 based on div2 value, that matches with dkl hardcoded table. So implementing this way as it proved to work in HW and leaving a comment so we know why it do not match BSpec. v4: Using the same is_dp check as ICL, need testing on HDMI over tc port Issue reported on BSpec 49204. Reviewed-by:
-
Clinton A Taylor authored
Added DKL Phy sequences and helpers functions to program voltage swing, clock gating and dp mode. It is not written in DP enabling sequence but "PHY Clockgating programming" states that clock gating should be enabled after the link training but doing so causes all the following trainings to fail so not enabling it for. v2: Setting the right HIP_INDEX_REG bits (José) v3: Adding the meaning of each column of tgl_dkl_phy_ddi_translations Adding if gen >= 12 on intel_ddi_hdmi_level() and intel_ddi_pre_enable_hdmi() instead of reuse part of gen >= 11 if v4: Moved the DP_MODE lane programing to another patch as ICL also needed it Sharing icl_phy_set_clock_gating() and icl_program_mg_dp_mode() with TGL as bits and programing as now it almost identical to ICL BSpec: 49292 BSpec: 49190 Cc: Imre Deak <imre.deak@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Clinton A Taylor <clinton.a.taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190926210659.56317-2-jose.souza@intel.com
-
Clinton A Taylor authored
BSpec was updated(r146548) with a new MG_DP_MODE Programming table, now taking in consideration the pin assignment and allowing us to optimize power by shutting down available but not needed lanes. It was tested on ICL and TGL, with adaptors that used pin assignment C and B, reversing the connector and going to different modes testing the not needed lane shutdown. v5: Using crtc_state->lane_count instead of dp.lane_count BSpec: 21735 BSpec: 49292 Cc: Imre Deak <imre.deak@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Anusha Srivatsa authored
We have a new version of DMC for ICL - v1.09. This version adds the Half Refresh Rate capability into DMC. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925201250.18136-1-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
The HuC FW has silently switched to encoding the version the same way as the GuC FW does, i.e. major.minor.patch instead of just major.minor. All the current blobs follow the new scheme, but since minor and patch are both zero there is no difference in the end results and we happily load them. New binaries, however, will have non-zero values in there, so we need to make sure to parse them correctly. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Acked-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925222121.4000-1-daniele.ceraolospurio@intel.com
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Andi Shyti authored
Continuing the theme of breaking intel_pm.c up in a reasonable chunk of powermanagement utilities, pull out the rc6 setup into its GT handler. Based on a patch by Chris Wilson. Signed-off-by:
-
Chris Wilson authored
The simplest and most maximal submission we can do, a thread to submit requests unto each engine. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925193446.26007-1-chris@chris-wilson.co.uk
-
- 26 Sep, 2019 3 commits
-
-
Michał Winiarski authored
We can use it in i915 for updating parts of unmasked registers from within a batch. We're also adding Gen8+ versions of CS_GPR registers (aka MI_MATH_REG in the coprocessor). Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Anna Karas authored
Insert structure members names into their descriptions to follow kernel-doc format. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Anna Karas <anna.karas@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The function intel_engine_breadcrumbs_irq() is always invoked from an interrupt handler and for that reason it invokes (as an optimisation) only spin_lock() for locking assuming that the interrupts are already disabled. The function intel_engine_signal_breadcrumbs() is provided to disable interrupts while the former function is invoked so that assumption is also true for callers from preemptible context. On PREEMPT_RT local_irq_disable() really disables interrupts and this forbids to invoke spin_lock() which becomes a sleeping spinlock. This is also problematic with `threadirqs' in conjunction with irq_work. With force threading the interrupt handler, the handler is invoked with disabled BH but with interrupts enabled. This is okay and the lock itself is never acquired in IRQ context. This changes with irq_work (signal_irq_work()) which _still_ invokes intel_engine_breadcrumbs_irq() from IRQ context. Lockdep should see this and complain. Acquire the locks in intel_engine_breadcrumbs_irq() with _irqsave() suffix and let all callers invoke intel_engine_breadcrumbs_irq() directly instead using intel_engine_signal_breadcrumbs(). Reported-by:
Clark Williams <williams@redhat.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
-
